I Built a THUMA Inspired Platform Bed Frame

No video

I Built a THUMA Inspired Platform Bed Frame - It Is Awesome!

Рет қаралды 101,190

Күн бұрын

This bed frame is made of solid oak. The only hardware are some screws providing extra holding power in addition to the glue used to attach the slat support to the inner rails. The legs are castle joints. This frame is inspired by (although not sponsored by) the Thuma bed. My total costs were around $375.
Isn't it refreshing to watch a bed frame video that isn't sponsored by Casper or Leesa mattresses for once?...
As wisely noted by one commenter: "Of course, it's not Thuma's design, it's a classic Japanese style of tatami frame. Thuma is just a popularizer and good at marketing."
I do not have any plans for this. When I make a project, I just go with the flow. That being said, if you'd like some plans to work from then you can get rough dimensions for your project from the Thuma website: www.thuma.co/p... Good luck, and happy building!
-----
This video is part of my Master Bedroom Renovation series. Check out all of the videos in the playlist with their links below.
Bedroom Renovations Part 1: The Plan - • Bedroom Renovations Pa...
How to Remove Wallpaper with DIF - • Use DIF to Remove Wall...
How to Fix a Plaster Wall Crack - • How to Fix a Plaster W...
Bedroom Renovations Part 2: Fresh White Closets - • Bedroom Renovations Pa...
How to Remove Paint from Hardwood Floors - • How to Remove Paint fr...
How to Polish Hardware Using CitriStrip - • Use CitriStrip to Poli...
Bedroom Renovations Part 3: Painted Trim, Doors, & Walls - • Bedroom Renovations Pa...
Bedroom Renovations Part 4: All Finished Painting Walls - • Bedroom Renovations Pa...
How to Make a Castle Joint / Shiro Joint / 3-Way Joint - • How to Make a Castle J...
I Built a THUMA Inspired Bed Frame - It Is Awesome! - • I Built a THUMA Inspir...
Building a Modern Walnut Headboard for a King Size Bed - • Building a Modern Waln...
----
Contact me: midwestmanmountain@gmail.com
Instagram: / midwest_workshop_and_g...

Пікірлер: 157

@Hdiggyz 2 жыл бұрын

Thank you for this video... I was looking for this exact video because I was also inspired by the Thuma bed and although I am certain it is worth the money, my husband builds everything for us! The joinery is beautiful and you did a great job showing how it is created and how it all fits together. The result is beautiful!! Strong work!

@MidwestManMountain 2 жыл бұрын

My goodness, thank you for your kind words! I hope you'll be as happy with your bed as we are with ours.

@derekmcgovern9600 2 жыл бұрын

I love how the interlocking joints you've described as proud rather than flush. They look so nice protruding out a bit. Really like that little change you put in. Nice work!

@RoyleMyles 2 жыл бұрын

I wish there were community workshops that I could use with all these tools. I’d love to make something like this.

@Steelwings101 2 жыл бұрын

Some places do let you rent tools. Also check out a similar video that I forgot who made it butnsesrch castle joint bed no cutting. If you use the right sized wood. You can do a lot with just some plug in tool. I'm going to.

@alexcocco5733 Жыл бұрын

all of this can be done with hand tools, it is just less efficient.

@Thurge Жыл бұрын

Try looking for maker spaces in your area they typically have woodworking and metalworking tools in a full blown workshop. I live in Cherokee County Georgia and the one near me has a 3D printing lab, woodworking, metalworking, and even a robotics lab. For regular folks it's $60 a month for 24 hour access and there's even a military discount.

@iitzDrewskii Жыл бұрын

some areas have maker shops with said tools and space.

@R3X84 7 ай бұрын

In no way shape or chance there would ever be a "community shop". Ppl don't even take care of their own stuff let alone expensive tools that most ppl have no clue how to use. There wouldn't be an insurance company that would take it, and the repair bill from misuse would be NUTS.

@pterafirma 2 жыл бұрын

Very nicely done. Of course, it's not Thuma's design, it's a classic Japanese style of tatami frame. Thuma is just a popularizer and good at marketing.

@MidwestManMountain 2 жыл бұрын

Thank you! That's a really important point. I'm going to edit the description to include this.

@SaycoPworrell Жыл бұрын

@9min :10 seconds Cost to make vs buying from Thuma. Thanks a lot buddy, love your Dad mug! Was thinking about making one for me daughter!

@MidwestManMountain Жыл бұрын

Thanks, Tron! I love my girls (and my DAD mug, too).

@marielo2095 3 жыл бұрын

It’s perfect! My hubby was concerned about squeaky joints. It’s just beautiful

@MidwestManMountain 3 жыл бұрын

Not one single squeak to complain about thus far. Thanks for watching!

@janbrewington7771 Жыл бұрын

I was so impressed when I saw this Thuma bed frame. Glad you’re showing how. Thank You

@waa_baa_kee 3 жыл бұрын

This is exactly what I've been wanting to build. Thanks for the well made video!

@MidwestManMountain 3 жыл бұрын

That's terrific! Thanks for watching, and happy building :)

@peppermartinez3893 Жыл бұрын

Well done. What a gorgeous bed frame!

@hdwoodshop 4 ай бұрын

Love the build. I would however say that without a level surface with the table saw, my heart skipped a beat when the end of the board jumped up. lol

@jeffpulmano6970 2 жыл бұрын

Thank you for explaining to the viewers of what's actually involved in making furniture! I think most people are clueless as to what's involved in making quality furniture that will stand the test of time. Kudos to you sir looking forward to more of your content & you have a new subscriber!

@MidwestManMountain 2 жыл бұрын

Thank you for those kind words, and thanks for watching! Quality woodworking is a satisfying experience.

@Djinn510 Жыл бұрын

Agreed, thought it would take me hours like assembling an IKEA bed, took me under 30 minutes. Great bed frame! Also, no drilling!

@cadiehl1 Жыл бұрын

Beautifully done sir. I’m going to attempt this.

@freddyperales 3 жыл бұрын

Very nice! I came searching for this because I felt like the price for the Thuma was ridiculous, and hoped I could do it for cheaper; but I greatly appreciate the reminder that quality care, craftsmanship and attention to detail shouldn’t be overlooked or discredited when considering the cost of a finished product like that. I still want to see if I can do it myself, though! Thanks for the video!

@nithinreddy9005 Жыл бұрын

Came here to comment exactly the same thing, truly appreciate this mindset. Keep living life the right way!

@jamescole1786 Жыл бұрын

1/27/23 (year after u built ) castle joint bed frame...just caught yur video on this..Great! Much enjoy your calm, methodical attitude & 'no rush' presentation. Carpentry was great! So, return to your workshop & more YT videos!🪚🛠👏👏👍👍👍🐕🙋‍♀️✅️😊

@jumpleadsx2 3 жыл бұрын

That's an excellent design. Good work! I think you need to build a good dust collection system. The mitre saw was kicking off a bunch

@meimeisabs6019 2 жыл бұрын

I was like: ayo this thuma bed looks cool and nice. I checked the price and I was baffled.

@werewolf74 2 жыл бұрын

I just saw an ad for this style frame and googled DIY as it looked simple, but elegant. Your video does not disappoint. I cant help but wonder if you cut those notches, 2x as tall you could make a 4 post bed like this. maybe lathe some wood knobs on top. Just a thought.

@MidwestManMountain 2 жыл бұрын

Hi Chris, thanks for watching! I definitely think that you could play with the height of the legs here and still have a structurally sound frame. That's a cool idea with the knobs, too. We've been very satisfied with the stability of the bed this whole year. Happy building :)

@millpepper2012 2 жыл бұрын

Stumpled across Truma today and of course your video which I enjoyed immensely. Thank you!!

@ricardopadilla4774 3 жыл бұрын

This video makes me wish I took construction in high school. Great Video!

@MidwestManMountain 3 жыл бұрын

Wow, thanks!

@coloradoan2199 2 жыл бұрын

Wonderful video. I prefer your work to that of Thuma, because unquestionably, your design uses higher quality wood and a better finish.

@She_Wont_Focus 2 жыл бұрын

Thank you for sharing this, you explain the process well and your energy is so warm and calming😊

@Kaodusanya 2 жыл бұрын

this is awesome, I making my own right now. almost done and it took me about 2 months, actually coming back to this video to see how you solved some issues I have currently mainly the slats.

@MidwestManMountain 2 жыл бұрын

Way to go! Glad this video can help.

@williamhanna5224 Жыл бұрын

Awesome video Great work !

@MidwestManMountain Жыл бұрын

Thank you!

@malinyamato2291 2 жыл бұрын

ure so great.... I want a bigger one to put tatami mats on and use as a platform for drinking tea.

@liborhendrych8553 Жыл бұрын

I love it. I'm about to make same bad. Just got the wood few days ago. I hope that my will look as good as yours!!

@paulafrance0404 7 ай бұрын

Absolutely beautiful good job

@kenzybrownable Жыл бұрын

this is wildly impressive!

@marktucker1753 2 жыл бұрын

Again what a great instruction. Do you possible have the measurements I would need to make a queen bed

@noliperdiz1837 8 ай бұрын

Awesome love the frame

@gerrysmith5597 2 жыл бұрын

About to embark on making one of these style of beds, enjoyed it until you put the horrible dark finish on the lovely oak - Arghhh. I would have left it natural with a clear polyurethane varnish to show the beautiful grain in the Oak, which is what I will do on mine but all in all a great video. The side rails I will put on mine will probably be glued but with dowels just to be extra sure they won't move. Cheers from the UK :)

@The85F0X 2 жыл бұрын

Beautiful. I plan to build most of the furniture in the barndo that I'm building and this was a great video. I'm going to use your template idea.

@nicholasgarza951 6 ай бұрын

So glad you showed how you cutout the castle joints with the Dremel, that makes it seem pretty straightforward! How deep were you able to get those joints with a straight tablsaw?

@MidwestManMountain 6 ай бұрын

Thanks man. The table saw went down 3" or so, as I remember. The specific details have faded from my mind in time.

@plexq 2 жыл бұрын

Thing is with a castle joint is that the size of the castle needs be comparatively huge, and you need very strong wood in the cross grain. I build this using redwood because I could get it easily and not too epensive, then the hook part of the joint just sapped right off. Make sure if you make this, you use a wood that's tough enough to handle that hook!

@MidwestManMountain 2 жыл бұрын

Yes, definitely use a strong wood. One year in and this oak is showing no signs of weakness.

@bruceregittko7068 Жыл бұрын

I made a similar bed out of pine 2x4s planed down to about 1-1/8” thick. To reinforce the “hook” I drove a 2-1/2” screw from the bottom into it. So far, it is holding up.

@AshS85 Жыл бұрын

I like that you routed the rails, the thuma bed doesn't have that! They're not sharp but they're not exactly rounded either.

@patchofheaven7196 3 жыл бұрын

It looks great!

@SpencerDavis2000 2 жыл бұрын

Great video. I would love to try to make one but living in an apartment now so unless I cut the wood in the parking lot, I will probably just buy it, haha. But super awesome.

@jonathchuck9812 2 жыл бұрын

Thought this video was too long for me normally but I thought I'd gloss over it. Cuz I liked that thuma inspired design Glad I didn't I like your demeanor. You got my sub. Keep up the good work

@mattbram8993 Жыл бұрын

Definitely want to build one, great job! 2 things. Do you have plans? Try osmo finish instead of poly

@projectmicky1226 2 жыл бұрын

That’s amazing!

@robertmacfarlane7723 17 күн бұрын

Looks awesome. Just curious as to why your outfeed table at table saw is so low? Same for bench at compound miter saw?

@MidwestManMountain 3 жыл бұрын

There's a gap in footage from 12:24-12:40. I don't know why, but it's too late to go back and edit. Just use your imagination to fill in the gaps.

@dangkolache 3 жыл бұрын

I've imagined the lights were cut, you were taken by force to be interrogated for war secrets, your wife busted down the door and took most of them out with expert hand-to-hand combat, and you used your trusty garden spade to deflect bullets as you both fled to safety how close am I to what actually happened there?

@MidwestManMountain 3 жыл бұрын

@@dangkolache dude, you totally nailed it! lol

@izzeystarz7578 2 жыл бұрын

Dude, nice build. Dude, cool video. Dude, what's that last track around the 12 - 13 min mark?

@MidwestManMountain 2 жыл бұрын

Thanks dude! Alas, I have no recollection of what the track is called. All that I can remember is that it's a non-copyright track that I had downloaded ages ago. It's meant to be chill. Hope you liked it.

@richardboutilier5429 2 жыл бұрын

Awesome job. Im currently building a similar frame and was wondering if you rounded over all edges on the top of your boards in the castle joint. Specifly where the perpendicular halflap joint comes together ? Thanks and really like your colour choice as well!

@MidwestManMountain 2 жыл бұрын

Thank you! Good question. I did round everything over...everything that might get bumped by a leg/foot at least.

@canaldemisrecuerdos4066 3 жыл бұрын

I wish I could be like you and make that bed! But unfortunately I don’t have the time to learn :( I guess I will have to buy one from thuma :(

@MidwestManMountain 3 жыл бұрын

Hey, we all can't do everything, right?! Congratulations on your impending purchase :)

@paulafrance0404 7 ай бұрын

Would you make a set of blueprints for this please ?

@derekskawinski1051 2 жыл бұрын

Hi, thank you for the detailed video! Did you end up cutting down the inside corner of the castle joint so the mattress does not hit it? Will adding poly to the wood make the joints much tighter, should I make them a bit loose before the ploy is applied? Thanks again!

@Daveass13 2 жыл бұрын

This idea and finished product are both fantastic. Do you your material list, cut list and/or plans in written form by chance?

@MidwestManMountain 2 жыл бұрын

There's a kind of diagram on the Thuma website (links in the description), but that's all. I never make plans for my projects. Happy building!

@aharp77 3 жыл бұрын

Subscribed. Great looking frame!

@MidwestManMountain 3 жыл бұрын

Thanks buddy!

@user-vz1wj6uv2b Жыл бұрын

The dark oak finish

@paulafrance0404 7 ай бұрын

Do you have a video for the tapering jig?

@JasonSmith-lt4mw Жыл бұрын

Sorry. I know this is an old video but i was curious about any squeaking? Every bed ive owned squeaks after a while and i do mean just with normal rolling over and getting in and out of bed. Granted, the bed has been assembled and disassembled a few times but can you share if the bed is noisy at all? Thanks in advance

@MidwestManMountain Жыл бұрын

I think the timing of your question is good, actually. After two years, NO, the bed frame does not squeak at all. The castle joints are tight, and the runners underneath are lined in felt where they contact the rails.

@JasonSmith-lt4mw Жыл бұрын

@@MidwestManMountain I appreciate the response! thank you

@enochsng3533 3 жыл бұрын

This looks absolutely amazing. I totally want to make this myself, this would be such a great anniversary gift for my wife! Is there any chance you could lay out the dimensions of the wood and dimensions of the cute? And especially more detail in how you did the middle!

@johndebellis19 3 жыл бұрын

Can you make available the exact type of wood, size of the boards and panels required to build this bed - the actual plans?

@MidwestManMountain 3 жыл бұрын

There are no plans to share, sorry. I made it up as I went and just jotted down notes on my yellow pad. That's how I roll. The frame wood was all oak, some 4/4, 6/4, and a 4x4 post. The slats are pine. Be creative! Happy building.

@ashhh-win 16 күн бұрын

What kind of stain did you use?

@yabasta13 3 жыл бұрын

Great video!

@marktucker1753 2 жыл бұрын

Thank you for the video. Looks great. Can you send me the companion video

@johnfithian-franks8276 3 жыл бұрын

It is a long time since I have seen your dog; she has grown so much from the puppy I remember. Good job with the bed frame, it is another example why Chinese woodcraft is so imperial to ours

@weetzybat Жыл бұрын

can you post a complete list of tools and materials?

@DavidSoComedy 2 жыл бұрын

@JoseOrtiz-jw4es 2 жыл бұрын

Until you start making wood project. You dont understand how long things take to make them look good. I agree with what you said 100%

@xcx4x 2 жыл бұрын

bravo

@nunya931 Жыл бұрын

I notice that you didn't spline the ends of bed rails like Thuma does. It took me awhile to realize that they are doing this to keep the "tab" on that cut from breaking when assembling/disassembling. Have you noticed any issues with the durability of your build? I'm building a similar frame myself and using walnut. I'm contemplating how important this reinforcement might be in a build like this...

@MidwestManMountain Жыл бұрын

Great observation. I have no had any issues with the durability of the bed. Perhaps Thuma used splines because they up-cycle repurposed wood, so the spline is a necessary reinforcement. Not sure. If you're using fresh walnut, like I used fresh oak, splines may not be necessary. Thanks for asking, and happy building!

@ramblinman2244 Жыл бұрын

You made a beautiful bed. What were the dimensions of you side boards? Also, what was the depth of slots in your castle joints? Thanks Kristopher

@MattEichsteadt Жыл бұрын

Hi! Amazing video! I'm actually going to try this myself pretty soon. What stain did you use for it? It turned out soooo nice!

@MidwestManMountain Жыл бұрын

Thanks for watching! I don't remember what particular stain I used. You could try to zoom in on some shots to see if there's anything open in the background, otherwise just sample a few colors that you like on a scrap piece from your project. Happy building!

@MattEichsteadt Жыл бұрын

@@MidwestManMountainit's 100% Minwax,. My best guess is either Jacobean or Dark Walnut; in case anyone asks in the future 👍

@markwigginton4884 3 жыл бұрын

Loved the video, but I can't seem to find the companion video on cutting and building the castle joints. Can you help me with a link?

@MidwestManMountain 3 жыл бұрын

kzfaq.info/get/bejne/eq1xjKV2xKjSpmQ.html

@user-vz1wj6uv2b Жыл бұрын

What size bed did you make?

@ronstanford1821 2 жыл бұрын

Excellent video. Your explanation of the cost of a Thuma bed frame was illuminating. If materials are $350, I'd rather pay Thuma and get a perfect product, rather than my own flawed version. You have the expertise and professional tools to make a perfect version.

@mariecolomb2573 Жыл бұрын

can you make the headboard that is just wood

@jtblatt1988 Жыл бұрын

Nice build! Do you like the Avocado mattress?

@MidwestManMountain Жыл бұрын

Thanks! Yes, we're nearly two years into it and we still like the Avocado mattress. I'm 6'5" tall and 215 lbs heavy with mild chronic back pain. This mattress feels comfortable for me in any position I pick to sleep.

@akosipatpat 2 жыл бұрын

Nice! Stumbled upon your video because I'm looking to purchase a similar bed frame. How's the Avocado mattress?

@MidwestManMountain 2 жыл бұрын

Glad you made it here! We are still enjoying the Avocado mattress one year later. No complaints. Comfortable for both of our backs.

@weetzybat Жыл бұрын

Is there a reason you decided to make it proud not flush?

@The78bluedevils 3 жыл бұрын

Due, you are forgetting one thing. Safety of your hands. cutting the feet on the table saw. a jig for the castle joint and the angle cuts. it's too easy to get hurt, and you will not see it coming. Stay safe brother.

@vicentia27 3 жыл бұрын

Great build, I am in the process of building one just like it, except I am using pine wood. That way if I make any mistakes it won’t be a total loss. I want to ask how you put the lip on the side pieces. Was it just a glue up up or a joinery? If so what kind. Thank you.

@MidwestManMountain 3 жыл бұрын

Cool man, happy building! That outside lip that runs along the top is only glued on. I was methodical with the glue making sure to cover and clamp every surface thoroughly. I figured that this wouldn't be weight-bearing and so it didn't need additional fasteners or sturdier joinery.

@vicentia27 3 жыл бұрын

@@MidwestManMountain thank you. That jig do you have a tutorial on it?

@marcuseaton3496 2 ай бұрын

"Four quarters"!? You guys keep finding weirder ways to measure stuff :D Very nice work though

@-blackwindsgeography8133 2 жыл бұрын

Will it creaking?

@gman404 Жыл бұрын

I just built mine, sent THUMA payment and put it together took me 35min 😂😆🤣

@olegkruk2238 2 жыл бұрын

what kind of paint did he used and spray ?

@vandytep1812 3 жыл бұрын

Hi Christopher. I wanted to take a stab at making this particular bed and wanted to know what the foot at the center of the frame is. Thanks in advance.

@MidwestManMountain 3 жыл бұрын

Hello there. I made that foot from some extra cutoff material. I glued a few boards and cut the resulting log to a width just less than the 2x4 oak board running down the middle. That one leg in the middle is plenty of support for us two tall adults. Happy building!

@vandytep1812 3 жыл бұрын

@@MidwestManMountain that’s very helpful. Thank you!!

@CAREbear90 3 жыл бұрын

How many hours would you estimate it took you? Looks wonderful! Thanks :)

@MidwestManMountain 3 жыл бұрын

Thanks for watching! I built it on and off over about two weeks. Not sure exactly how many hours went into it specifically though. Happy building.

@thegrimmperspective 3 жыл бұрын

Bought the Thuma bed and Avocado mattress about 6 months ago. I wish I would have spent the money on a good table saw and built it myself. :) How are you enjoying that bed? It's pretty firm. So firm that we just purchased the topper. Been sleeping on it for week. Still pretty firm but not to the point that either of us are getting up sore.

@MidwestManMountain 3 жыл бұрын

Interesting! I'm certainly glad that I built. How is your frame holding up? As for our Avocado, both my wife and I like it a lot. It took about a month to fully 'break it in' for our backs to get used to it, but since then we've been sleeping better than ever. I've also recently switched to sleeping on two firm pillows, so I'm sure that does something with my alignment and comfort. I'm predominantly a side sleeper, too. Everyone is different, I suppose.

@chanellstone4903 2 жыл бұрын

What color wood stain is this?

@kdianne2308 3 жыл бұрын

Thank you for this video! Where did you get the beautiful oak wood?

@MidwestManMountain 3 жыл бұрын

I got the oak from Menards, actually :)

@kdianne2308 3 жыл бұрын

@@MidwestManMountain Thank you.

@kayaramirez5608 2 жыл бұрын

How long did this take you

@AlakaiAcademyKailuaKona 2 жыл бұрын

Is it solid? It looked wobbly during assembly? Does it feel solid, like one piece?

@MidwestManMountain 2 жыл бұрын

It is exceptionally solid

@adamotterson7639 3 жыл бұрын

I'm wanting to make this bed in a Cali King size. I'm trying to figure out how much lumber to buy and was wondering if you would mind sending me your plan?

@MidwestManMountain 3 жыл бұрын

Hi Adam. I don't personally make any plans for my projects, but you ought to be able to gather some measurements for the Cali King frame from the Thuma website to get you started. Happy building.

@nunubutt 3 жыл бұрын

Wondering where you source the wood?

@MidwestManMountain 3 жыл бұрын

Menard's, actually.

@nunubutt 3 жыл бұрын

@@MidwestManMountain Im jealous of Menards, i went to Home Depot on the west coast and all they had is birch.

@MidwestManMountain 3 жыл бұрын

@@nunubutt Booo! Normally I'm jealous of Home Depot because they carry Ridgid tools. I hope you find the material you need somewhere reasonable. Good luck.

@dwgar1322 Жыл бұрын

What was the dimension of the four legs you made for your Thuma bed frame?

@MidwestManMountain Жыл бұрын

See link in the description for rough dimensions.

@akhiborntorock1 Жыл бұрын

What is that chilsing tool you used at 4:14?

@cadiehl1 Жыл бұрын

That’s a multi-tool. I have one and it’s amazing.

@pingwenfriend 2 жыл бұрын

You don't by chance have a plan for you design of the bed?

@MidwestManMountain 2 жыл бұрын

Hello there. I do not have any plans for this. When I make a project, I just go with the flow. That being said, if you'd like some plans to work from then you can get rough dimensions for your project from the Thuma website: www.thuma.co/products/the-bed?variant=7550696554524 Good luck, and happy building!

@sds6303 3 жыл бұрын

How much would you charge to make one?

@MidwestManMountain 3 жыл бұрын

You flatter me. Thuma sells a perfectly fine one, otherwise good luck building your own :)

@alihosseini9604 Жыл бұрын

❤👋👋👋👋👋👋👋👋👋👋

@natkelly6634 3 жыл бұрын

Hi. Very interesting. Do you sell plans for these beds? I would be interested. Thank you

@MidwestManMountain 3 жыл бұрын

Hi Nat. I don't make plans for my projects, sorry. Happy building!

@asknavid7752 2 жыл бұрын

Beudefol! 🥰🥰🇧🇩🇧🇩

@kevinweber5129 2 жыл бұрын

Looks better than Thuma and Thuma doesn’t have a way to attach headboards.

@hardeshsharma3870 3 жыл бұрын

Please send the details of this bed

@MidwestManMountain 3 жыл бұрын

I have no details to share. Be creative, and have fun!

@jameskuhn4020 2 жыл бұрын

I'd gladly pay you $1,200 for a bed like that.

@daphneponder2248 4 ай бұрын

Can I pay you to build me one. Thuma is to expensive.

@LumaLabs 2 жыл бұрын

To be fair, you aren't paying for a "hand crafted" bed for $1000 from Thuma. You're paying for a Vietnamese factory (with hard tooling and big volumes) to knock those beds out of Rubberwood. Thuma's COGS (Cost of Goods Sold) is probably about $200. Of the remainder, Thuma probably needs to spend 15% of revenue on marketing as they are in a hyper-competitive industry, and probably another $100 to logistics (shipping containers from Vietnam, warehousing in the US, and shipping it to customers). I'm not trying to knock Thuma - god knows, marketing a product well enough that anyone hears about it and wants to buy it is a remarkable challenge these days, but it is a different business than actual hand-crafted furniture.

@MidwestManMountain 2 жыл бұрын

An insightful perspective! I mean, I'm certainly glad I built mine instead of buying, but not everyone has that option. Well put.

@stevesutherland7703 2 жыл бұрын

Agree, but they also do make a point to use trees grown for latex (end of life), to make the beds. More money on shipping logistics/ design of components/packaging (no Styrofoam). Everything costs money, tooling, jigs, materials, time...might not be all hand-made, but it's a superior option to those MDF beds that sell for almost the same.