I can't believe this turned out the way it did!? Full tutorial

Рет қаралды 8,760

3 ай бұрын

Join me as I create this stunning frog out of epoxy resin and fantasy film. I am so happy and surprised by the end result. Let me know what you think in the comments. Like, subscribe and share my channel.
Please note: At the time I released this video, I am not endorsed, affiliated or paid by any of the brands or products listed below. They are added for your convenience.
Products I use
JDiction 1:1 Epoxy resin
a.co/d/fHpY4Lq
JDiction UV Resin Trio bundle
a.co/d/iR0wuwu
JDiction UV resin
a.co/d/cTSWdtP
UV Light (Let’s Resin)
a.co/d/33RQrHT
Leveling Table (JDiction)
a.co/d/8vXAj5q
8 oz Mixing Cups
a.co/d/2vKzqJ3
4 oz Mixing Cups
a.co/d/hlSmBWX
1 oz Cups
a.co/d/6TLXZ3P
Pink Nitrile Gloves
a.co/d/gSA8yFY
Resin Curing Machine (Resiners)
a.co/d/0kpWcob
Rechargeable Resin Handheld Mixing Machine (istoyo)
a.co/d/jinLN0o
Heat Mat (istoyo)
a.co/d/hCDhR0G
Tempered Glass
a.co/d/497dieQ

Пікірлер: 130

@MizJaniceResinArt 3 ай бұрын

"This is not turning out the way I envisioned it." Me with every resin project. Lol

@craftingwithsierra 3 ай бұрын

Isn't that the truth...lol thanks for watching!

@MizJaniceResinArt 3 ай бұрын

@@craftingwithsierra it was fun... I love frogs and he turned out so cute! The little gems in the toes are adorable! I need that gem picker upper... I always struggle with those

@user-op8gw7sp3w 3 ай бұрын

And the mold will be cleaned! Like video. Too cute new subscriber

@rosanneshale923 22 күн бұрын

I love it,my daughter loves frogs and I had my first attempt with that mold,came out ok not brilliant 😊. Thanks for the tips

@Ali-H3444 3 ай бұрын

Amazon sells realistic animal eyes. I buy the 6mm size and they fit perfectly. Takes them up a notch. One of my best sellers.😊

@craftingwithsierra 3 ай бұрын

Thanks for the tip!

@passerineblue 2 ай бұрын

Beautiful, Sierra!!! Your hard work paid off.

@craftingwithsierra 2 ай бұрын

Thank you so much!!

@Soifdesang9 3 ай бұрын

It turned out great! To unmold easier, try using a liquid dish (fairy) soap & water mixture and submerge the mold in it while pulling the sides open and squishing it around a bit. Take it out and it's much easier to unmold stuff. Helps break the seal and lubricates the removal of the molded resin piece.

@craftingwithsierra 3 ай бұрын

Thanks for the tip!

@user-jw4fz3sq1w 2 ай бұрын

Sierra, that is absolutely stunning!

@craftingwithsierra 2 ай бұрын

Thank you! ☺️

@vickyewilliams5764 8 күн бұрын

Love love love him! Great job!🖤🖤🖤

@craftingwithsierra 8 күн бұрын

Thank you!

@sheilab5319 3 ай бұрын

Very pretty frog good job

@craftingwithsierra 3 ай бұрын

Thank you! He turned out so nice

@resincreations 3 ай бұрын

This is beautiful!! Great sharing ❤

@craftingwithsierra 3 ай бұрын

Thank you!

@lisas.522 3 ай бұрын

How fun. Nice to see the type of tools you used. Never seen that before.

@craftingwithsierra 3 ай бұрын

I love my tools 😉 thanks for watching.

@Unicity61 Ай бұрын

Just found your channel and I’m a fan. Your frog came out gorgeous. Your tools make things a little easier. I was wondering if you can tell me the machine you used and the guides used. I can’t seem to find them. I appreciate your tutorial. Thank you for sharing.

@Stacey-ur9qe Ай бұрын

Absolutely stunning

@craftingwithsierra Ай бұрын

Thank you so much!

@grandmawlaneyrogers2489 3 ай бұрын

This turned out really beautiful. I love using fantasy film.

@craftingwithsierra 3 ай бұрын

Thank you! I really enjoy using it.

@gorgettemotyka6666 3 ай бұрын

He is just gorgeous, i love the Angelina film inside and the black really makes it stand out, also I love the rinestones in the toes. Like someone else said your frog is the best one I've seen done. OUTSTANDING 😍😍😍😍😍😍😍😍😍 Thank you for sharing this 😁

@craftingwithsierra 3 ай бұрын

Thank you so much for watching and letting me know! I really appreciate it.

@DLampo 3 ай бұрын

I love your little frog. Absolutely gorgeous! New subscriber here. Also, I’m so sorry to hear about your lung damage. I really appreciate your tutorials even though you struggle to talk. My doctor got lung damage from COVID so bad that it ruined her health. She had to retire on permanent disability. She was young too. Thanks so much for what you do.

@craftingwithsierra 3 ай бұрын

Thank you! I debated sharing that, but it is a part of my life. I only really notice it when I'm tired or talk fast. I love frogs, they and elephants are my favorite. I'm so happy that you like them. I'm sorry to hear about your Dr., that is so sad to hear.

@JaneSmith007 3 ай бұрын

He is perfect my friend... love him.

@craftingwithsierra 3 ай бұрын

Thank you!

@staceydeller2881 3 ай бұрын

this is gorgeous, thanks for sharing, Gentle Hugs

@craftingwithsierra 3 ай бұрын

Thank you for watching and letting me know what you think!

@mariverhagen8082 3 ай бұрын

He is so beautiful 😍!! Thanks for sharing your artistic talents 😊.

@craftingwithsierra 3 ай бұрын

Thank you for watching! I had fun creating him.

@lisacapers5853 3 ай бұрын

Wow, black is beautiful, amazing ❤❤😊

@craftingwithsierra 3 ай бұрын

Thank you! The black made those colors pop! Thanks for watching!

@merriljones9823 3 ай бұрын

It came out so beautiful ❤

@craftingwithsierra 3 ай бұрын

Thank you!

@leehall9258 2 ай бұрын

Love it gorgeous will be trying this technique for sure Thanks for sharing ❤️👍

@craftingwithsierra 2 ай бұрын

You’re welcome 😊

@grandmawlaneyrogers2489 2 ай бұрын

That’s beautiful!

@craftingwithsierra 2 ай бұрын

Thank you!

@sondrabergstrom1454 3 ай бұрын

First time watching you. I've been watching tons of resin videos and only tried a few resin projects so far. I think you did a fabulous job on this little guy! He's definitely one of my favorites compared to what others have done with him. He's gorgeous! I enjoyed watching you, subscribed, and will certainly return to watch more. Thanks for sharing!

@craftingwithsierra 3 ай бұрын

Thank you for the compliment and thank you for subscribing.

@ARTBYSPARKLE 3 ай бұрын

I love this little guy! The colors ate amazing! Great job!💥👏🏻👍💥

@craftingwithsierra 3 ай бұрын

Thank you!

@tracey1327 3 ай бұрын

Wow! Brilliant❤

@craftingwithsierra 3 ай бұрын

Thank you!

@marcellabarratt8778 2 ай бұрын

Beautfull love it . 🌷🌷🌷🌷🇨🇦🇨🇦🇨🇦🇨🇦🇨🇦

@craftingwithsierra 2 ай бұрын

Thank you! 😊

@BoredWifesProductions 3 ай бұрын

Very pretty❤❤❤

@craftingwithsierra 3 ай бұрын

Thank you!

@user-ry6gf2pb8x 3 ай бұрын

Love the frog tho!

@craftingwithsierra 3 ай бұрын

Thank you!

@clairemillette4645 Ай бұрын

Wow c'est vraiment magnifique mais c'est un travail de patience pour le démoulage mais elle est très jolie avec les belles couleurs iridescent felicitation madame et bonne chance pour votre santé 👍👍👍🥰🐸🐸🐸❤❤

@craftingwithsierra Ай бұрын

Thank you!💐🌸

@rosanneshale923 22 күн бұрын

My daughter loves frogs, i attempted first time with this mold, came ot ok, not brilliant 😊 thank you for the tips. The frog is beautiful

@craftingwithsierra 22 күн бұрын

Thank you! Good luck! You can get Fantasy film from the same company I have linked in the Bunny video.

@jenniferr8195 3 ай бұрын

Very lovely outcome on your frog! One of the prettiest I've seen done! Great job on getting the air bubbles out! 🫧 Thanks for sharing this!

@craftingwithsierra 3 ай бұрын

Thank you for watching and letting me know what you think. I appreciate it.

@rhondagover9237 3 ай бұрын

It's beautiful

@craftingwithsierra 3 ай бұрын

Thank you!

@sugargmum4517 2 ай бұрын

Love it 🤩🥰

@craftingwithsierra 2 ай бұрын

Thank you!

@user-hl3kj8ug7x 3 ай бұрын

Beautiful❤

@craftingwithsierra 3 ай бұрын

Thank you! 😊

@WildatArt2023 3 ай бұрын

We are sisters you and i! Frogs are absolutely the cats meow!

@craftingwithsierra 3 ай бұрын

Absolutely! My favorites!

@ReptilesandResin 3 ай бұрын

❤it's beautiful

@craftingwithsierra 3 ай бұрын

Thank you! 😊

@pulsetkr45 3 ай бұрын

beautiful frog!

@craftingwithsierra 3 ай бұрын

Thank you! 😊

@jennifercriss1897 3 ай бұрын

I have seen everyone do this frog BUT you did it BEST!

@craftingwithsierra 3 ай бұрын

Wow! Thank you, I really appreciate it.

@Lizs.Tallent 3 ай бұрын

Gorgeous! Good job!!

@craftingwithsierra 3 ай бұрын

Thank you!

@Jemmyjo 3 ай бұрын

I love frogs too. I love to learn new things all the time and there is nothing like the feeling when something just goes right! Great job!!!! You killed it!

@craftingwithsierra 3 ай бұрын

Thank you! I was shocked I didn't get any bubbles...😳

@Jemmyjo 3 ай бұрын

@@craftingwithsierra it turned out great! Bubbles are SO frustrating!

@laurajohnson7165 3 ай бұрын

I’m new to you but love that frog 😊

@craftingwithsierra 3 ай бұрын

Thank you!

@craftingbysonja5411 3 ай бұрын

Beautiful

@craftingwithsierra 3 ай бұрын

Thank you!😊

@greenleif 3 ай бұрын

Love it ~ it's PERFECT!🐸✨💎💖

@craftingwithsierra 3 ай бұрын

Thank you. I can't get over how nice he turned out! Thanks for watching.

@claramadeira1943 3 ай бұрын

One of the most beautiful pieces of resin I saw

@craftingwithsierra 3 ай бұрын

Thank you so much for the wonderful compliment! I really appreciate it.

@SupportMensMentalHealth 3 ай бұрын

I've got this mould, it's lovely, bit of a pain getting out but once you get the hang of it, I spray a drop of alcohol into it to lose the last bits. My sons nickname when he was little was toady, I made this frog and put it on his grave but I think I might try this and swap it out for the one he's got which is a galaxy mica powder. It beautiful but this frog is stunning

@craftingwithsierra 3 ай бұрын

I'm so sorry for your loss. I'm sure whatever you place at his gravesite is very beautiful. Thank you for the compliment, it means more to me than you'll ever know. God bless.

@Tiger804 3 ай бұрын

❤ Stunning frog and you made him so well. Love the colors.

@craftingwithsierra 3 ай бұрын

Thank you so much! I really appreciate it!

@Tiger804 3 ай бұрын

@@craftingwithsierra your very welcome.

@janicescragg2388 3 ай бұрын

This turned out so beautiful. Very inspiring. I like how you graduated the look with using the leftover film in the legs. You have just earned my subscription.🙂

@craftingwithsierra 3 ай бұрын

Thank you so much! I truly appreciate the kind words and the sub!

@mattersofthehartbynat8815 3 ай бұрын

Oh Wow… he is absolutely gorgeous!! Definitely one of the best that I’ve seen. I think I’ll have to get some of that fantasy film for myself… thanks so much for sharing your ideas, it’s very much appreciated!! Much love from Nat (Brisbane, Australia) ♥️♥️🇦🇺

@craftingwithsierra 3 ай бұрын

Thank you for the amazing compliment! Happy crafting!

@VickyShawcooksalot 3 ай бұрын

16:13 next time maybe make a small dam with UV resin? I've seen that done a few times, and it seems to work well. Though I always remember after the need for it. 😅

@craftingwithsierra 3 ай бұрын

Thank you for your input. I wasn't planning on putting anything in the legs until just before I began recording. A UV dam would have made things a lot easier.

@sherriharry5505 2 ай бұрын

❤❤❤❤❤❤

@suewarnes9469 3 ай бұрын

Gorgeous! ❤just found you. Subscribed.👍☺️💐

@craftingwithsierra 3 ай бұрын

Yay! Thank you!

@janina8559 3 ай бұрын

You can put his feet back in the mold and just pour the missing toes. That would make him perfect. Very pretty and would love to see one in a dark green shimmer resin. If you try again.

@craftingwithsierra 3 ай бұрын

The toes were poured..I missed putting gems in them. Thanks for the suggestion and watching! The dark green would be pretty.

@janina8559 3 ай бұрын

@@craftingwithsierra oh I misunderstood that explains why they all looked there to me 🤣. Thank you for clearing that up for me. I saw the turtle you did a while back and loved that one as well. I will keep an eye out for other animals done this unique way!

@Susanasart 3 ай бұрын

So cute 💞💞 just subbed dear

@craftingwithsierra 3 ай бұрын

Thank you!

@hteets511 19 күн бұрын

I have that mold....id say it gets easier to demold but it doesn't. Lol it is definitely the stiffest mold i have to this day.

@craftingwithsierra 19 күн бұрын

It can be difficult not to pull off the toes...

@UnityByNature 3 ай бұрын

🐸🐸🐸

@johnpierce227 3 ай бұрын

Ribbit Ribbit very nice

@craftingwithsierra 3 ай бұрын

Thank you!

@ReneeB5 3 ай бұрын

He’s beautiful! Haven’t seen the embossing trick before… I’ll have to try mine out! Hey may I ask what those little purple gemstones you used in his toes are? 🖤💜💙

@craftingwithsierra 3 ай бұрын

The embossing was very subtle, but is noticeable in person. The gemstones were a last minute idea, they are just purple rhinestones. Thank you for watching and happy crafting.

@gerripeter484 3 ай бұрын

Gorgeous wow can you tell me where you bought this mold please

@craftingwithsierra 3 ай бұрын

I bought it on Amazon. Thank you for watching! Frog mould a.co/d/dBsQiHL

@elaineriley4863 3 ай бұрын

It is gorgeous

@craftingwithsierra 3 ай бұрын

Thank you!

@Ilovefriendsandfamily 2 ай бұрын

Beautiful job. What black is that and also what size things did you put in his toes

@craftingwithsierra 2 ай бұрын

Thank you! I used black pigment from Little Windows. www.little-windows.com/products/black-resin-colorant . I believe I'm using SS16 in the toes.

@dawneharrison3089 3 ай бұрын

What was the black ink color you used, I did not see it linked, thank you in advance 😃

@craftingwithsierra 3 ай бұрын

Thank you for watching! I use this pigment www.little-windows.com/products/black-resin-colorant

@helema23 3 ай бұрын

i have this mold and have done so many frogs with it that are different from each other... now i want to heat up the holo paper i have (gift bags are a cheap source of it) and toss it in.

@craftingwithsierra 3 ай бұрын

I'm so glad you like this frog! If you do create this I'd love to see it! Post a picture on my FB page.

@user-ry6gf2pb8x 3 ай бұрын

Id rather hear the heat gun

@craftingwithsierra 3 ай бұрын

Thanks for watching.