Why don't the manufacturers of these hobs provide us with a decent size termination box so crimp connections can be used. We always say whoever designed these things should come out to site and have a go then they will feel our pain!

Maybe the hob kept popping up because the worktop was too thick for the clips. Should have tried using a multi-tool to trim mm by mm around the clips till they stayed in place or maybe the clips were adjustable?

Well worth replacing with an induction hob. Previous would have been wired by the kitchen fitter no doubt.

Happy New Year, Delroy! Thanks for the video.

Best wishes for the new year Delroy

Sorry Dell,I had installed a brand new one beginnings of December and the 6 mm crimps go very well screwd to the hob.more reliable then doing that split

Happy New Year Del keep up the good work.

Nice one mate I’ve actually gotta gotta go do one now wish me luck haha

Thanks for the videos! 🍾🍾💥💥 Happy New Year! 🥃🥃🍺🍺🍺🎯🏌🏻‍♀️ Stay safe. Retired (werk'n)keyboard super tech. Wear your safety glasses!

Gotta be super careful pushing hobs out of chipboard worktops because it takes the veneer clean off unless you depress all the clips first (speaking from experience)

Nice install 👌🏻

Looks like the kitchen fitter wired the last one up del. I've never been a fan of them connections on hobs and having to wire twin and earth into they wholesaler stocks butile cable which comes in handy but only up to 6mm

Keeping it clean an simple del Roy

Good video, hobs and ovens are always a pain, grease and crispy items under the rim. Connection blocks are often too small or just awkward to get cables into.

You made this look far more difficult than it is

Last one I went to diagnose that had stopped working after only 1 month after the "manufacturers approved installer" had fitted it .... All terminal screws into the basic insulation at the outlet plate 🤦🏻‍♂️ Hob ignitor also screwed into it with CPC screwed to insulation so the spark didn't work 🥴🤦🏻‍♂️ Oven must have just made contact on just a few strands of the copper inside the plate terminal and then got too hot during use, melted the copper strand and then stopped working. And this workmanship by the manufacturers technicians!

did you check what the links are for, some hobs have links for diversity to prevent overload, so you can run it on a lower circuit rating. Why guess and just run with it?

👍👍👌

Have you changed your camera? Its amazing clear!! Love your videos

Nice install, I think the red indicator comes on only once the hob is hot

What is that song you keep playing? I know that I know it from somewhere but I can't figure it out 🤦‍♂️

Good video, they never make the connections easy on the hobs

did you advise to earth the stainless worktops?

Sweeet as Sugaaar, go on Del!

Del just for future, some times the hobs won’t work unless there is a saucepan on the hob itself.

Oh my days Del. That looked like a pig to install.

Both of the wheels on my bike are the same size but that’s just me :-)

Hi Delroy, I have got a matching pair of safety gloves like yours !

Boddman thanks for your wonerful knowledge , teaching along with health and safety.display....watching you from east central caribbean.......waitikubuli...original name of island.....meant as talll as het body... ..capital Roseau.,Dominica....please dont take us.for.tje.spanish republic of Santos Dominigo or simplly.Dominican Republic...

I hate doing hobs and ovens, all that grease 😱. Why is it, you have a big appliance like an oven or hob and the smallest connection box you can imagine, it's not like they are right for space. I did one hob recently it needed a removable magnet to work, it was the control dial, it even has WiFi built in🙄

O my days how much

Another shoddy install by others and made better. However Manufacturers Instructions would say the hob and oven to be connected with a minimum cable specification of HO5-VVF/R so reconnection of the twin and earth is non compliant. Plus terminal connection is for round flex not flat.

pls use ferrals next time :D