I FINALLY Bought a Yamaha Raptor 700

Рет қаралды 126,758

2 жыл бұрын

After years of wanting one of these quads, I finally buy a Yamaha Raptor 700. #Raptor, #700cc, #Beast,
►SUBSCRIBE: / @2vintage
►MY SECOND CHANNEL: • New Polaris ATV Snow P...
► ADD ME ON ALL SOCIAL MEDIA ◄
► FACEBOOK: / 2vintageyoutube
► INSTAGRAM: 2_vintage_ / 2_vintage_
► SNAPCHAT the2vintage
► EMAIL FOR BUSINESS INQUIRIES ONLY: 2vintagetooo@gmail.com
Thanks for watching and subscribing!
New videos every week!
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. 2vintage( Joe Weber, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL 2vintage( Joe Weber) CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
2vintage (Joe Weber) makes no representation about the sufficiency of any safety precautions and equipment used in this video.

Пікірлер: 327

@jameskenney5623 3 ай бұрын

I have an 07 700 that I bought new. It's probably got 10 hours on it. She still looks like new. I put Barker in frame dual exhaust, trinity intake, airbox mod, better fuel controller, re-geared.... she's been a fun machine. I rolled it at 83mph on a dry lake bed and there was ZERO damage to the quad, somehow..... me... not so much. Punctured lung, broken shoulder, broken collar bone, broken ribs It's amazing that it still looks and runs like new.

@Davido50 2 жыл бұрын

What fool could let this amazing ATV get to this kind of condition!? I have a '21 Raptor 700R-SE I pd $12k out the door. Amazing ATVs. Mine is cherished!

@warrioryfm350x 2 жыл бұрын

@2vintage I have a set of 2008 cases that have been vapor honed and had the wrist pin oil sprayer mod done to them as well as the crankshaft support plate holesndrilled and tapped $600 plus shipping for the cases I also have tons of other 06-14 700 parts

@juliantucci3273 2 жыл бұрын

The sad thing about raptors is they are such good machines but often bought by careless owners(not 2vintage), almost every one of ‘em you see is blown up the top or bottom end before the tred is even worn off of the factory tires

@juliantucci3273 2 жыл бұрын

So definitely worth every bit of content you can get out of it bro

@racequad9 2 жыл бұрын

i've seen that with every quad, more so with 450s

@Davido50 2 жыл бұрын

Sad ..they are $12k out the door!

@Davido50 2 жыл бұрын

@@racequad9 not mine man!

@racequad9 2 жыл бұрын

@@Davido50 Crazy how expensive they've gotten. I paid $6,500 for my 2007 700r SE brand new back in the day. And what do you mean not yours?

@stevefritch3180 2 жыл бұрын

Hey Joe! What a killer video! I really enjoyed this video because you explained what you were doing while you were doing it. The Raptor700 looks like it will be a bad ass quad! Most importantly, it's special!! Lol. Thanks for the great video dude and keep up the good work!!

@jimnorcross2515 2 жыл бұрын

I loved my raptor 700. The a-arms are the same as yfz 450 in case you ever bend one like I did lol. The fuel injection is money. I had an 06, the first year for them. I had a power commander, full HMF exhaust and a pro design stage 2 billet intake and filter on mine. The only problem I ever had was the throttle position sensor went bad. The dealer fixed it under warranty and never had an issue after that.

@MRMechanicRC 2 жыл бұрын

Haha, i remember my buddy had a raptor 700 and he bent the arm on his too 😂

@phillipwagner7347 2 жыл бұрын

Great job on never giving up! I’m sure once you get the cases you will have this thing going in no time!

@thomasedwards9024 Жыл бұрын

Just found an 06 for 2700!!! Guy posted for 4000 talked him down to 3k. Then the clutch was slipping bad along with bent steering neck and bent front wheel from wreck. So I told him I have 2700, he took it no problem!!!

@megamindtvsydney3967 2 жыл бұрын

Hi mate this is the quad that you should turbo charge and keep as your beast . Let’s do it!

@tanmansbikebuilds931 2 жыл бұрын

Yah honestly fuel injection would be easier to work with when turboing eh

@thomassliker2881 2 жыл бұрын

Yes and easier to tune out the 400ex back together and build the 700 boosted lifestyle built a turbo 660 lawn mower so the 700 is probably not much different

@johnboy8191 Жыл бұрын

I agree !

@dougw585 2 жыл бұрын

Your vids keep getting better and better...Thank you

@aaronfischer7199 2 жыл бұрын

Impressive video mate. I've got a 2019 raptor. I love the thing it's either sideways or up on the back wheels. Good job on the diagnosis without just throwing parts at it.

@staygold902 2 жыл бұрын

The 700 is such a better machine than the 660. The one Pete Hager has is nuts. It doesn't take much work to make them ridiculous

@kleksriders1772 2 жыл бұрын

Wow man. You are rally good with these bikes. I love watching these videos.

@themetalmaiden7462 5 ай бұрын

So nice to see someone work through the problems methodically. I'm looking at getting one of these and I learned a lot about them just from watching this video.

@briangoscinak9725 2 жыл бұрын

Siiicckk. They make so much torque its hard to stay held onto the bike launching on pavement... they pull harder off the hit than alot of street bikes. Congrats

@estebanreyes7030 2 жыл бұрын

the flashing of the engine is a code from the bike. there are forums that tell you exactly how to decipher them but i’m pretty sure you count the number of long blinks then the short blinks and if you look at the form it should tell you one of the issues the bike is picking up.

@vintagetintrader1062 2 жыл бұрын

These are perfect for engine swaps, especially MT07, Z650 twins. I’m on the lookout for a Raptor in Australia but they are not that common here. Have a look at the converted ATVs that the Europeans build for road use, just crazy.

@jbj198840 2 жыл бұрын

Pull the plug out of the clutch cover and put oil straight into the crankcase there instead of waiting for it to pump from the tank

@FunGoingFast 2 жыл бұрын

Outstanding job troubleshooting the spark issue. I'm sure a lot of shops would have just started replacing a bunch of parts, vs tracing the wiring. Well done! Raptors are awesome and that one is in surprisingly good condition to be outside for so long. Enjoy.

@TheGreatBigShow 2 жыл бұрын

YES! I have the exact same bike. Was riding it today. Can’t wait to watch this.

@besigila5328 2 жыл бұрын

Your garage is heaven.. And that beast looks happier because it's in your garage, now👍🏽🤘🏽👍🏽

@benjaminswanson435 2 жыл бұрын

Hey man love the vids just found you channel not to long ago. Loved the idea with the 400 and turbo and in the Last video I did see a guy mentioning that it should be swapped to injection and I agree with him but seeing this new rig here this would be a perfect candidate for your turbo project

@jdmguy6086 2 жыл бұрын

Love what you do you no is a great day when you post

@donjuan7428 Жыл бұрын

Knowledge and determination. Joe, you ARE the man! Great videos.

@c0munguyforcaz 2 жыл бұрын

awesome quad 2vintage! love your videos and wow what a quad!

@billbly1691 2 жыл бұрын

Glad I found your channel I look forward to seeing your videos great channel love it

@jamiesmo91 2 жыл бұрын

Great find Joe. Raptor 700 in stock form is a great bike with plenty of power. Give it a good bath and that thing with come up looking really clean. Looks like it hasn't done many hours before it was left to rot outside. If you do find a good set of cases and get tearing into it and everything in the bottom end is still mint I suggest maybe a new set of rings and valve stem oil seals and that thing will last a long time. New set of tyres aswel and you will have plenty of fun on it

@jasonpetrich4141 2 жыл бұрын

Vasilybuilds, on youtube welds up giant size holes in cases you can weld that case no problem, find a good welder have it done. The 700s are awesome, one of the best platforms yamaha made. Only issue we had was it went through fuel faster than our carb quads, and ran out of fuel in the trail a few times when we first got it...

@blazedout420 2 жыл бұрын

I dont even own a raptor I have a 12 ltz400 but I love watching ppl work on quads. Please keep it and do all the work on camera. Would love to see it

@user-cv8vb8fm5j Жыл бұрын

This is the type of content I like, thanks, good to know!

@titletownclowns1545 2 жыл бұрын

Put the turbo on this one, it has fuel injection so the only thing you would have to do is remap the fuel and spark but there are plug and play modules for that. Pops

@763GanderGuys 2 жыл бұрын

I’ve been watching your channel for 4-5 years and I think I have seen WD40 in a 85% of the vids. 😂 keep up the good work👍👍 hopefully this raptor will be a good quad In the end.

@raptor700dad7 2 жыл бұрын

Hope once it’s together you have as much luck & fun as we do at Theatvworld. We ride 2011, with 4400 miles 660 hrs ,2013 with 3900 miles 590hrs ! Neither have had any drivetrain work ! Love EM ! PS those tires look to be original factory type

@Buff_Dave_Oprtr 2 жыл бұрын

Nice. I know it takes alot of time,but,really like when you do a "start up" in same vid,after fixing.

@bigmac.. 2 жыл бұрын

All we are waiting for is a R1 swap

@johnsonotg1083 2 жыл бұрын

I knew he was a subscriber when the ad said the motor would pop over 😂😂😂 I was like I know damn well he made this ad for ol joe ✌️

@dezow5674 2 жыл бұрын

Hello sir own a 2017 700 and wash it off pretty heavily the first place you described does not take on water at the crank case vent the only places are the air box under the seat with the lid on and the exhaust

@MM_in_Havasu 2 жыл бұрын

If you have cracks in the crankcase half, see about getting it heli-arced(TIG welded) back together, save some $$$! Good score despite the amount of work that may be needed. Start searching for a set of cases for that ATV, or another engine.

@cris_m8 2 жыл бұрын

Wow never heard the term heliarc until now. You must be old school.

@derekmcwhirter4723 2 жыл бұрын

I had a Crack even longer than that, I took an aluminum welder and welded it back, then spread jbweld over that to cover any chance of a pinhole. Been riding it for 4 years since, no issue

@mikedilsaver3483 2 жыл бұрын

Looks sick! On the raptor 700 your supposed to put oil directly in the case first. The fill cap is on the right side. Nice raptor!

@11GalleryATV 2 жыл бұрын

He did not want to do that because of the crack in the case ... it would just drain right out ...

@pnwatv5094 2 жыл бұрын

You put a quart in case and oil tank

@gabrialbing492 Жыл бұрын

Use bleach water and dawn dishwashing liquid. To clan mold, tree, sap, dirt and grim off plastics. Spray on and watch the dirt and mold and sap all fall right off. Let set for a few minutes and spray off. No scrubbing at all for the most part.

@jeremyjones2191 2 жыл бұрын

I don't know why people don't at least clean stuff when they are trying to sell it. I would never try to sell something like that! But I am a little ocd

@stoveboltlvr3798 2 жыл бұрын

I like the look of this bike and the color combo. I was wondering if that crack could be TIG welded? Sometimes drilling a hole at each end of the crack can stop it from spreading. The price of a new case might make it worth looking into.

@Davido50 2 жыл бұрын

Raptor 700R is the best sport ATV ever made ! Nice deal.

@alexmassie361 2 жыл бұрын

Great find ! I loved my old 700r too, just sold it to get a yfz 450R fuel injected PLEASE get rid of the ugly grab bar i can’t look at it anymore !

@williamdavis922 2 жыл бұрын

Nice diagnostic work Joe, that is one bad crack, either new cases, or get them welded up

@dropkickking4289 2 жыл бұрын

So my four wheeler does not wanna get into reverse the cable does move and goes all the way but idk what could be the reason for that issue idk if it’s the trans that reverse is gone or some other thing any suggestions please and thank u

@markolellep4795 2 жыл бұрын

my moped 50cc 2stroke like starts on high idle and sometimes it goes down and up but more full gas can help?

@louisarmstrong8863 Жыл бұрын

I have noticed your presentation is fantastic and you know about certain engines 👍the floor in your workshop has to be up graded👍presentation is everything a person may not think about the small details keep up the good work, sorry about being a pain in the neck

@kyleb6325 2 жыл бұрын

Do you think you would be able to just weld the cases?

@osielh420 2 жыл бұрын

So today I was riding my quad and decided to do donuts cuz it was wet so when i was the chain snapped and wrapped around my front sprocket so i took off the chain and there’s a small chip in the case and is leaking oil but the chip is probably like the very very tip of my finger so it leaks oil but like very very little, can i use jb weld or use a aluminum welder or do i have to replace the whole cover?

@boxchevyfetish8646 Жыл бұрын

I have a 2003 Yamaha blaster when you hit the throttle it will not rib up what is that

@larrywarner9314 2 жыл бұрын

Just a thought is the a safety sensor for when it's low on oil it won't run ?

@roger2276 2 жыл бұрын

Good video .. hey wanted to ask you were you get that gas can at ? The one in this video with the red push button ?

@mitchelladams1069 Жыл бұрын

Had a no spark issue once on a raptor had some safety switch on clutch or parking brake

@ZooEducation 2 жыл бұрын

Hey man you should just JB weld that crack. I patched a case and 3 owners later my patch was still holding. Thats a gnarly crack though.. idk 💪😂

@m8fusion712 2 жыл бұрын

Nice find man, it's in really good shape

@bigc7t 2 жыл бұрын

Looks like an easy tig weld fix

@COMPY357 2 жыл бұрын

😂😂good one

@topdogmechanic8261 2 жыл бұрын

i had the same thing happen to me it was a oil pickup screw came out and took out near all of my gears and clutch basket and my case ruined near everything im rebuilding it now so after seeing that crack i would have never started that bike until it was gone through

@typicalbamboozler6030 2 жыл бұрын

did that crank case vent into the air box? the air box was left open and kept filling up with water in the rain? just a thought there at the end.

@RiderJon-offical 2 жыл бұрын

Hey I got a question, I’m looking for jets to fit my 1993 Suzuki rmx 250 kehin carb, online it says it’s stock jets are 172 main and 60 for the pilot, I can find 172 main but I can’t find any 60 slow. Any where I could look?

@robintrlen9296 2 жыл бұрын

that rubber hose that came from in to the crankcase im pretty sure goes in to the airbox. at least the one on my raptor 350 did.

@mariuszpawlowski440 2 жыл бұрын

Great Job!

@finster7582 2 жыл бұрын

Jb weld n ride it til it either blows or the parts come in !!! 😃👍👍👍👍👍👍👍👍could have the cases welded up as well...

@benschlack5814 2 жыл бұрын

It'll be a real special edition when you're done

@MRMechanicRC 2 жыл бұрын

Nice! I love the raptor 700’s. Sweet quads and fast as crap

@macpac3803 3 ай бұрын

Great quads have owned several, take care of them they'll last forever.

@deanoloughlin6129 Жыл бұрын

I'm absolutely astounded about how cheap quads go for in the US. 1600 US is absolutely crazy cheap. Here in the UK we pay way more...

@NormalishGuy 2 жыл бұрын

Awesome dude!!!

@bobbymckinney1264 2 жыл бұрын

Good find on that cdi wire good deal on this one..

@getsomepack 2 жыл бұрын

I’d like to see your next one a Suzuki 230 quad sport they were a good four wheeler

@mikedemello3002 2 жыл бұрын

Please put a lid on those oil buckets .. lol . Keep up the great work !!!

@gregmaggio5217 Жыл бұрын

I always had an affinity for the Banshee, but those can be hard to get

@Yatta760 2 жыл бұрын

We lit🔥🔥🤘🏾

@louisjohnsonjr.4934 2 жыл бұрын

Seems like a lot thats unplugged. May need to go over the wiring and plug everything back up then check for spark

@ivanarellano433 2 жыл бұрын

Great video man as always 👍 would you or anyone on here know the name or paint code on this raptors frame? Thanks!

@1millerz 2 жыл бұрын

What part of Wisconsin are you located, if I may ask? I actually this quad on marketplace but was too slow to jump.

@ooossccar.7515 2 жыл бұрын

i been waiting for this for 2 years

@jayeddleston9486 2 жыл бұрын

Definitely could be a doctor with all those patients. Awesome job chasing down the spark

@jromem7313 2 жыл бұрын

Pro tip lol you can just use the coil wire to test for spark no need for the cap and plug

@Team2Gils 2 жыл бұрын

About time! 😃

@luisbenitez5788 2 жыл бұрын

BEAST of quad

@marioburciaga5442 2 жыл бұрын

You teach me alot of things thanks alot?

@AREA51_ATVSXS_PERFOMANCE 2 жыл бұрын

Wild this in Las Vegas is worth gold

@Blue04Z71 2 жыл бұрын

I split the cases on my 08 raptor 700. It wasn’t bad. Bought it with the trans blew up and I replaced it.

@AREA51_ATVSXS_PERFOMANCE 2 жыл бұрын

I’m more amazed that you got it to start with the cases like that haha

@mattoaida 2 жыл бұрын

a few people mentioned it but i would look into getting it welded back by a professional. You would save a lot of money and wouldnt have to go through the work of completely disassembling the motor and putting it all back

@custommadeknives 2 жыл бұрын

yeah tats gunna need to be motor out and cases split , that crack goes up the engine

@frofrobikelife2516 2 жыл бұрын

Oh man I thought that was a snake at 8:20 🤣

@Official_957Racing 2 жыл бұрын

YESSSSS I HAVE BEEN WAITING FOR THIS ❗

@jonathanclick1453 2 жыл бұрын

Man i really jelly man u keep getting deals i bet u cant find one down here in fl thats broken for no less then 2500 i wish i could buy one that u fix cuz ur one hell of a mechanic an u do it right an when u have a big ? In your head u do a lil humming thing then u get the answer pretty cool man

@LSDdreams808 2 жыл бұрын

just got one today i love it

@PeterVoight Жыл бұрын

Man Covid prices strike again… I remember buying my running nothing wrong with in 60-70 hour raptor 700 for 1500 flat. She gave me 0 issues most fun I ever had on a quad. Sold it for 2500 which I guess now a days for a 100 hour machine that has 0 issues is nothing.

@kingGfour 2 жыл бұрын

Big torque boyz

@jeremywade2070 2 жыл бұрын

So cool. I’ve been waiting to see this.

@superdavessubiandmore823 Жыл бұрын

I would take it in to my work and have the guys tig weld it, obviously it still has to come apart. I'm goin to guess those cases ain't cheap.

@lennybigney5442 2 жыл бұрын

I was wondering do you ever sell the bike you work on cuz I seen you had a Honda cm450 a year ago on your show you sell that stuff cuz I'm in Canada like New Brunswick Canada I was I'm interested in that bike I had the 1980 cm400t I'd like to get another one

@mitchelladams1069 Жыл бұрын

You lubed the cylinder after you cranked it over when u checked the gauges lol