Best tool in the garage .ive had mine for 3 year's and wouldn't be without it.your back will thank you !!

you were the only one showed were all the bits went so hats of to you..

Where did you get the lift from & how much was it, if possible 👍😎

Congratulations! Have been trolling your channel for a while. Love your builds. I wish I could afford 1) a bike and 2) to turn it into one of your masterpieces. My favorite thus far is The Warrior. Keep on going. Lovely bikes!

If that's the 1000kg version it's the same lift I have... Brilliant bit of kit, you'll love it. The only issues I have are the chock is too high so it's REALLY close to the front discs and I had to drill a couple of holes for tie down straps to secure the bike.

Congrats on the ramp! I hope it works out well for you. I have a neighbor that has one bolted to his garage floor; he actually parks his bike to one side of the garage and puts his pickup truck over the ramp when its not in use. comes in handy for oil changes, chain cleanings, etc.

Hi, well done, great buy. Your back will be more than happy with it. thanks. Gus

Love the content man, you've gained another subscriber from across the pond.

Love this, it’s just like my garage and I’m embarrassed too! But I’ve revived several bikes over the years!! Great vid!

You should make a video emptying out your garage, cleaning, and reorganize and putting everything back

Ha! I knew that you would end up getting a lift! Especially after working with one in Florida! Happy for you my friend!

Great addition Ant. If it’s any consolation my garage is equally as full, unfortunately not with bikes, but with my wood working tools and machinery and all the crap that might just come in handy!

What lift did you end up getting and how much/ where from?

We’re did you get it from and how much keep the great work love the videos

makes a good work bench too!! i'd love one but have to sort out the garage as well it's just not big enough!!, i'd build a cnc table if i had anywhere to put the thing, i'd just make one though as i'd be using it for a workbench just if not more for my bikes,

Hey Im 20 years old and just purchased my first motorcycle a honda cx500. I was wondering what size shocks did you use for the honda cx500? The one with the red and white tank. And also if you know wat Exhaust system did you install? Your videos really inspired me to make a cafe racer this winter. Also any advice for a first cafe build?

Very nice. I've wanted to make a much smaller scale version of that kind of lift with my powerarc myself.

ohhh what id give for a messy garage lol, ramp looks quality piece of kit another item on my wish list.

Very nice! A lift was the best addition I've got. One suggestion is to replace the wheel clamp with a roll in wheel chock. They work much better than the clamp ones and much easier to use!

Looks pretty much identical to the harbor freight lifts that I have in my shop. I actually use a loading ramp for a truck to put my bikes on the lift to get a bit longer and more gradual angle to the table. My ZX actually will drag and get hung up if I use the stock ramp. Like that color way more then my red one though lol. Congrats on the lift. One thing I did also was get rid of that stock wheel clamp and got a trailer wheel choke.

I really like the grey! Most here in the states for a reasonable price are red, such as mine.

WOW, I have the same look in my shop (aka my garage) with bike on the lift and bike stuff scattered everywhere, painted parts I have to dodge or get hit in the head while they hang to dry and almost as claustrophobic, LOL! Two best things I've invested in, one the lift and two led lights with the power of the sun, oh and three a welder, belt sander, . . . . LOL .

I saw someone had fitted rubber caps meant for the bottom of a cane. Put them on the screw down feet to keep the lift from sliding forward when you put a bike on it.

Congrats on the lift, I still don't have one but, I am now 66 years of age and getting to the point that there is a real need for one soon.

Nothing like a new tool for the workshop.

Congrats on the lift. Does it have a locking bracket on it when extended to prevent it from collapsing by accident If not you should rig something for your well being

okay man time to clean your workshop but just let you i think you are a great bike builder cheers Robert from australia or as we know from down and under PS is another one from the UK ( Delboy's) you guys are brilliant

can you put the lift on castor wheels? that would be great for changing work position?

This vid has spurred me on to get one for myself, as, well... you know what’s it’s like, clambering around on all fours, looking for that 10mm nut that mysteriously disappears to never never land for a few hours!

One suggestion, put some pipe insulation on the 4 square ends, you will definitely walk into them. Dont ask me how I know !!!.

Nice hat!

If you could get rid of those gray shelves, it may fit the bikes a little better and leave you room in the middle. (I love cleaning my garage and optimizing).

Got sent here for the ramp, stayed for the bikes 👍

Hate you missed Barber's weekend. the CX looked great, shadetree said something about a baby?

Hi mate, is your lift the 800ILBs one? what did you pay for it? and where from? thanks

Hope you don’t mind me asking, but what make is this ramp ? Thanks

Would it be possible to share the make and model of the lift, there are no links in the description. Am looking for one

mechanic/machinist 45 years, I went to harbour freight in Gaitherburg,Maryland USA... the manager told me that I was too handicapped to own a motorcycle lift. If I can't load it, I can't buy it. He was about 30 years old and at least 150 lbs. over weight. Wish I could be there when it catches up to him. Sorry to share my bitterness, and I can't wait to see yours in action

This is identical to my new lift, which is a SwitZer Hydraulic Bike Lift rated at 1000lb and supplied by KMS Brands on eBay for the princely sum of £405. They also do a 800lb version. It has a couple of issues - the front wheel lock does not hold the weight of my bike upright by itself (Honda ST1300) and the side stand misses the edge of the bench so making placing it on the bench essentially a two person job. Also, the centre stand of my bike fouls the rear opening of the bench, so it cannot stand on its centre stand. To get round this, I use a secondary scissor lift to support the weight centrally. As someone has suggested I am getting a new front wheel chock which will secure the front wheel when you ride on to the bench.

When you're budgeting everything in i.e labour, materials and time etc bang in a weekly cleaner to! 😉 Good job HSE don't check our garages 👍

Hey Tony, you cannot imagine how I would like to visit your workshop and clean it for free. It would be a pleasure to meet the GS, CX and CB.

Großartig! You will love your lift!

You're going to need a Bigger garage!

That should come in handy. You need a bigger garage now.

Hi nice lift ,where did you buy it??

Much nicer hat this time.

Going to need a bigger boat, err garage.

Good but it is a huge investment in tooling.

Menudo taller más sucio y desordenado. Las motos se rayaran fijo alguna vez.