I Need More Air! - Building a New Workshop

I Need More Air! - Building a New Workshop | Part 1

Рет қаралды 54,999

Күн бұрын

Start speaking a new language in 3 weeks with Babbel 🎉. Get up to 60% OFF your subscription ➡Here: bit.ly/RestoreIt60
In this episode of Restore It, I fit out the new workshop! The first of four new pieces of equipment arrives and the unit is transformed from a dark and depressing place to my best workshop ever!
I finish unpacking, remove the skylights to make the workshop super bright during the day, uninstall the car lift, paint the floor, and test the new machine out.
For compressed air solutions check out Northern Compressed Air - www.ncair.co.uk/
#workshop #restoration #workshopbuild
Thank you for watching! Subscribe for more videos like this one. More information is below.
Timestamps:
00:00 - intro
00:41 - Learn a new language with Babbel
02:12 - Why I didn't start straight away
03:40 - The current electricity set up
04:00 - Clearing the mess
04:24 - Clearing the back of the workshop
05:12 - The first new piece of equipment
08:09 - Northern Compressed Air To The Rescue!
09:58 - Fixing the lighting issue
13:11 - The NEW electricity set up
13:37 - Moving the Car lift
14:16 - Removing the arms
14:37 - Removing the middle plate
15:12 - Draining the hydraulic fluid
16:29 - Clearing more mess
16:44 - Unbolting the lift & cutting the bolts
17:28 - Bringing the first side down
18:24 - Bringing the second side down
18:58 - Moving it to the front of the workshop
19:46 - Test fitting the compressor
20:19 - Organising more stuff
20:57 - Preparing for floor paint
21:16 - Clearing the area
21:28 - Cleaning the floor
21:49 - Painting the first section of the floor
22:29 - How it's looking so far
23:58 - Putting the compressor into its place
24:20 - Cleaning the air hose
24:47 - The Chicago Pneumatic CPM 15 10 270 Screw Compressor
26:05 - How it performs
27:06 - Why this compressor?
28:48 - The air tools love it!
29:54 - Final thoughts & Thanks
If you have any questions about the restoration, the tools I'm using or anything else, just ask me in the comments. I read them all and try to reply as soon as possible.
Follow me on Social media to keep up to date with videos and behind-the-scenes.
My Patreon Page:
/ restoreit
My Twitter Page:
/ restore__it
My Facebook Page:
/ restoreitchannel
My Instagram Page:
@RestoreItChannel
PayPal Donations:
Restoreitchannel@gmail.com
Discord
/ discord

Пікірлер: 202

@dan725 Жыл бұрын

Chicago Pneumatic/Atlas Copco/Quincy compressors ARE KING!!! My dad replaced his ultra loud compressor with the CPC series for his business (a small tooling manufacturing workshop), and it was night and day. It was such an insane upgrade over his decades old air compressor, as such it recouped his $30k investment on it within 1 year due to the fact that he could make a meaningful percentage bump in the amount of parts per week. That thing has been running 7 days a week for close to a decade now with tens of thousands of operational hours with zero issues. It’s the very core of his 10-man workshop.

@RestoreIt Жыл бұрын

Wow! 10 man! Great to hear that Dan. I knew they were good, but this really does make it hit home just how good these are... I don't think i fully appreciated how much of a game changer this comp is... I can't wait to get stuck in. Cheers!

@daedalus_20v Жыл бұрын

The great thing about getting an "overkill" tool or piece of equipment is you basically never have to think about it again, which lets you focus your time and energy elsewhere. When you can knock one headache off the list while simultaneously making the rest of the tasks on the list easier to deal with... well, it's a no brainer. Overkill is the best kind of kill.

@RestoreIt Жыл бұрын

I'm totally with you Daedalus. I can't wait to work as much as I have been, whilst being super efficient with the new tools.

@georgeclements2742 Жыл бұрын

I always try to overspecify on tools I buy and have not had reason to regret it. Yes, it costs more initially, but saves a lot of frustration and probably saves money in the long run. With all the commitment you are putting into the workshop and equipment, I hope that you have a good secure lease and protection against the rent going up to an unaffordable level.

@RestoreIt Жыл бұрын

I absolutely agree George, even after experiencing these tools for only a short amount of time, I know the time i'm going to save is going to be humongous. The cost of rent was also a factor for downsizing, it's getting a bit crazy, but I'm good where I am for now. Cheers.

@Basement_CNC Жыл бұрын

same, go all out on tools, they are the best investment you can make, thell pay for themselfs buy saving nerves, money and time 😂 also good tools deserve a proper home that keeps them save and you ALWAYS know where they are i recently put some shadowfoam in my 72" toolbox and the time i spent searching for tools went to 0 best investment ever

@DrMJJr Жыл бұрын

So proud of you and I’m super excited to see all the major improvements!! I’ve been waiting to see the upgrades to the workshop forEVER, but I honestly think these will dramatically change your ability to get the work done efficiently and in a reasonable amount of time. You know I’ve been a long time supporter so I’ll end now by simply saying “CONGRATULATIONS”!!!! ♥️♥️

@RestoreIt Жыл бұрын

Wow thank you so much, Michael. That's too kind of you. The next episodes should be with you sooner than this first one, as I had to wait a while for the three phase upgrades to be completed. I don't sell them or anything, but please let me send you a Restore It t-shirt or something as thanks. You've always been so kind and given me motivation in the comments, it's the least I can do. Email me at restoreitchannel@gmail.com if you fancy one. I'm super excited to show you the rest of the upgrades and progress, thanks again, Michael!

@wimtillaart8671 Жыл бұрын

That hydrolic fluid looks brand new, will be good for decades! I enjoy your channel very much but sometimes you are an over the top perfectionist.😄

@RestoreIt Жыл бұрын

Oh really?! I'll keep it, cheers Wim!

@OmbraYSG Жыл бұрын

I was a compressor tech for the company who make that compressor till last month, you made a very good choise! Some tips: leave it on the pallet, it’s way easyer to move around. Automatic drain set to 5sec/5minutes Always clean the air filter and the two radiators once a month, and never ever skip the oil and filter change. About that: the display should ask for mainteince every 2000h, but the separetor is usually swapped evry 4000h. By expirience i reccomand changing it every 2000h no matter what, because it clogges up super fast. Never run it open, it has forced cooling. If you ever need something just dm me!

@RestoreIt Жыл бұрын

Ombra! This is an amazing comment, thank you so much for taking the time to write it. You're a legend. I was wondering what the optimal auto drain set up was, and also if I even could leave it on the pallet. I take it this is okay for the compressor? I will locate the two filters, clean them, and carefully blow out/vaccum the rads regularly. Thanks for the tip. When you say open, are you talking about the main panel on the front? I have so many questions! It's a bit like a spaceship to me right now... Would you mind sending me an email, as I can't DM on YT anymore? My address is restoreitchannel@gmail.com. Much appreciated Ombra! thank you!

@mathiasdm98 Жыл бұрын

@@RestoreIt Hey We don't recomend keeping it on the pallet, but it will cause no harm. Especialy since it is a tank mounted one it does'nt give a difference. Get some rubber pads underneath it to isolate it from the floor and you're good to go! Remember to keep up with service on it and the machine will serve you well. Also check the oil level quite regular. These machines can consume quite some oil without you noticing it (normally the service intervals take this into account but better be safe than sorry). When the oil level drops, the temperature will rise and your oil will deteriorate faster, and the air flow will drop... AND it will consume even more oil. I don't have the expierience white these small machines so you have to keep an eye out for it. Usualy these run at 80°C outlet temperature (check it on the controler) when the environement is 20°C. So when the temperature start rising you know what to do ;-) Overal CP machines are great machines. Great quality for the price! There are machines with better "Status" out there but I don't know if it is worth it. I do R&D work for the company so I've seen quite some different machines. And if you really want a better performing machine that is higher in quality you will need to pay a lot more. I have to say there are better ones, but in my honest opinion, it is just not worth it...

@narhode Жыл бұрын

Pretty cool to see the emphasis on the air compressor. I am an engineer and work for one of the world leading screw compressor companies... not the brand you purchased however. You will be extremely happy with a screw compressor over a reciprocating.

@RestoreIt Жыл бұрын

Thanks Nick, I'm very excited about the whole thing because its mind blowingly better.

@malcolmlane-ley2044 Жыл бұрын

It made me smile that my dad’s advice to me many years ago was always get more light on the job and keep everywhere tidy! Such good advice that will always be relevant. Your channel and achievements go from strength to strength, well done.

@RestoreIt Жыл бұрын

He's absolutely right Malcolm... It makes the world of a difference. Thanks so much, very kind of you to say.

@wonderingmonitor1996 Жыл бұрын

Mate, the new workshop is coming along wonderfully! Have been following your channel for a while now, and it's just blowing my mind how your shop is growing. Well done mate, very well done indeed. Cheers!

@RestoreIt Жыл бұрын

Thank you, mate! Much appreciated.

@leedress2187 Жыл бұрын

Congrats on the new compressor. Looks like a sweet machine

@RestoreIt Жыл бұрын

Thanks, Lee!

@ashman8613 Жыл бұрын

You should make a mezzanine floor to store all your stuff.

@RestoreIt Жыл бұрын

That would be great, and it's not out of the picture!

@KeithSheridan95 Жыл бұрын

Looking forward to the next episode already. When bolting the new lift down, dont use anchor bolts. measure the baseplate hole diameter and get the largest threaded bar that will fit (m18 perhaps) and use chemical anchor resin to fit. Once cured you can fit nuts, washers and spring washers and torque up to 90 ft-lbs. This is the method i used myself and have had zero movement. Overkill but safe

@RestoreIt Жыл бұрын

Fantastic advice Keith! I will be doing exactly as you've suggested. Thanks for the advice, I was torn, but threaded bar it is! Thank you!

@moldingpro7208 Жыл бұрын

I am so happy for you and excited to see the new upcoming content you will create! Wish you all the best!

@RestoreIt Жыл бұрын

Thanks MoldingPro! I can't wait to crack on.

@lolman77 Жыл бұрын

There is nothing better than actually very good tools! I totally get the excitement! Like everybody, I used to cheap out on tools, and I always ended up regretting it. I am still at the "hobby level", but for the last couple years, I started to spend big money on tools that are a little overkill for my needs, but I would keep for life. I assume you had a deal with that company to give them a bit of an advertisement. It's sometimes a little annoying as a viewer, because it doesn't feel legit. But not in this case. The product is obviously amazing, and we can tell the excitement is genuine. Very happy for you. Can't wait to see it used!

@RestoreIt Жыл бұрын

Thank you, Lolman. I'm totally with you after experiencing this tools... Worlds apart. Yes, you're right. This is my absolute dream compressor, I couldn't shut up about it! haha. It gets used in the next ep! Thanks again, dude.

@iteerrex8166 Жыл бұрын

What a sweet compressor. Congrats 👍

@RestoreIt Жыл бұрын

Thank you dude. I'm in love with a machine...

@dan725 Жыл бұрын

Third works shop series in so many years hah :). Your commitment and attitude is so incredibly infectious and an inspiration. Thank you! Also, man, once you painted the floor, the workshop completely transformed!!! And LOVING your nerding out over that compressor LOL! I’m actually loving your assessment and excitement over your new “OP” equipment!

@RestoreIt Жыл бұрын

Haha, I had to find one that really suited me and I think I've found it... For now... And yes, the floor makes all the difference. Annoying that all of my stuff is already in there, but by the end of the series it will all be done :) Cheers!

@chriholt Жыл бұрын

All I can say is WOW! You have come so far since I started following you, and the new shop and compressor are just two obvious "fruits of your labor"! Keep it up, and I'm very excited for your future.

@RestoreIt Жыл бұрын

Thank you, Chris! Subbed for 4 years I see. It's good to still see you here :) Lots more to come!

@TheNorthernmunky Жыл бұрын

Coming together brilliantly

@RestoreIt Жыл бұрын

Thanks, Logan!

@sypernova6969 Жыл бұрын

very cool to see it all done. I`ve always enjoyed seeing you do your workshop builds. the taking the lift apart is really interesting, it`s not something you see regularly. thanks!

@RestoreIt Жыл бұрын

I'm glad you're enjoying them, Sebastien!

@rickfulton2353 Жыл бұрын

excited for you after watching for years from Arizona

@RestoreIt Жыл бұрын

Thank you, Rick! I can't wait to pump out the content once its finished.

@Nayte08 Жыл бұрын

There is no channel or tv show or movie or video game I look forward to that compares to what you are doing in your garage. A+ upgrade, I’m so happy for you man! Congrats

@RestoreIt Жыл бұрын

Wow, thanks Nayte! Super nice of you to say. Lots more to come shortly!

@TheJcman72 9 ай бұрын

I didn't know about those compressors, so I searched a little bit and I found that it is really another step for air tools, not just for power but also for silence.

@kdoran709 Жыл бұрын

That compressor is amazing

@RestoreIt Жыл бұрын

I'm in love Keith!

@josiptadic8301 Жыл бұрын

Good luck with the new workshop! Keep us updated!

@RestoreIt Жыл бұрын

Cheers, Josip!

@vmoutsop Жыл бұрын

Great channel, great content and now great toys. Congrats!

@RestoreIt Жыл бұрын

Thank you, Vmoutsop!!

@BluVergilWolf Жыл бұрын

Wow, just cool, it will be a great workshop, in cramped conditions but not offended. I envy you a little Roman, you really have everything as it should. Good luck buddy, let everything be as you want. God bless you, I can't wait for the next episode. Congratulations! 🎉

@dhilankerai3585 Жыл бұрын

Thank you for this video! Don’t ever leave me over 3 weeks without a video 😂

@RestoreIt Жыл бұрын

My utmost apologies, Dhilan!

@UploadingOCD Жыл бұрын

So exciting. You're totally deserves it, good luck!

@RestoreIt Жыл бұрын

Thank you, Itay!

@rhodesm6683 Жыл бұрын

Congrats on the upgrades! Looking forward to your continued projects. Cheers from Guam USA👍

@RestoreIt Жыл бұрын

Thank you, dude!

@bullethelldemon Жыл бұрын

i love to hear how excited you are about your new tools and workshop! im so excited to see the rest of the series and to see the impact the new workspace will have on your productivity 😁 i always love when you do a workshop series

@RestoreIt Жыл бұрын

Thank you Tangramshader, I'm glad you enjoy the workshop stuff and I can't wait to start posting A LOT more :D

@RileySurfaceWorld Жыл бұрын

Looking forward for the next episode ☺

@RestoreIt Жыл бұрын

It won't be long now! ;)

@johnmead1337 Жыл бұрын

Looking forwards to next episode.

@RestoreIt Жыл бұрын

Coming soon, thanks, John!

@stevebrown5145 Жыл бұрын

Great to see an update video, was bored at the weekend and was watching old episodes on YT, you’ve certainly come a long way from your first garage/shed . Can’t wait for the next 3 workshop updates.

@RestoreIt Жыл бұрын

Thank you Steve! Glad you're enjoying it. And don't worry, you'll have plenty of Restore It content to watch soon! Cheers.

@FixitFred Жыл бұрын

I love these shop upgrade videos.

@RestoreIt Жыл бұрын

I'm glad to hear it, FixitFred!

@W.A.R.L.E.Y. 9 ай бұрын

Acompanho teu trabalho há anos, sou brasileiro e as legendas facilitam demais minha vida. Continue com o excelente trabalho e estou ansioso pela continuação da BM 🎉

@mobydoux Жыл бұрын

The beast. Can't wait for the next episodes !

@tomswindler64 Жыл бұрын

Glad to see your finally happy about a workshop.nice upgrades.just keep on with your vision.kudos 😎😎😎👍👍👍

@RestoreIt Жыл бұрын

Hey Tom, thank you!

@colin-hanlon Жыл бұрын

I enjoy the workshop restore videos more than the cars 😊

@RestoreIt Жыл бұрын

Haha, its a shame they only come around so little!

@nettneo Жыл бұрын

Wait.... You got a New Compressor ? Cant wait for more.

@RestoreIt Жыл бұрын

Thanks, Robert!

@tomjohns8498 Жыл бұрын

It's great seeing your channel grow so looking forward to more content 😊

@RestoreIt Жыл бұрын

Thank you, Tom! I'm glad you're enjoying the journey

@aarongrabowski3775 Жыл бұрын

Congrats bro. You deserve this. So excited to see some new video’s now.

@RestoreIt Жыл бұрын

Cheers, Aaron!

@martinberazategui Жыл бұрын

felicitaciones por la nueva adquisición, te lo mereces. Esto seguramente potenciara tus habilidades. Saludos!!

@RestoreIt Жыл бұрын

Thank you, Martin!!

@jedgreco Жыл бұрын

Can't wait for the next episode 🤩

@RestoreIt Жыл бұрын

Cheers, Jed!

@danielalmagro9649 Жыл бұрын

Muchísimas felicidades. Te va a quedar genial. Para mí, junto a M539, eres el mejor canal de restauración de coches!!! Estoy deseando volver a ver tus proyectos. Gracias!

@GRASSPOLE Жыл бұрын

Great investment ! That’s a gamechanger !

@RestoreIt Жыл бұрын

Thanks, Niall!

@juanignaciocaino Жыл бұрын

congrats!

@RestoreIt Жыл бұрын

Thanks Juan!

@barnahalo6916 Жыл бұрын

Waiting for the next episode 🎉😅

@RestoreIt Жыл бұрын

Coming soon! :)

@54mgtf22 Жыл бұрын

Love your work 👍

@RestoreIt Жыл бұрын

Thanks, MGTF!

@Itnecap Жыл бұрын

I think he loves his compressor

@filipbrecelj669 Жыл бұрын

whatching this at 1.5x speed is perfect same ammount of info in 3/4 of time

@RestoreIt Жыл бұрын

I do this all of the time, good idea! Cheers Filip!

@n20cpri Жыл бұрын

Congrats dude well deserved! Gonna be awesome when it's going 100%

@RestoreIt Жыл бұрын

Thanks, dude! Yes I cannot wait.

@Mad-Duk_Machine_Werkes Жыл бұрын

Leave the compressor ON the pallet - I know it doesn't look as nice, but it makes cleaning/painting the floor easier, the wood dampens the vibration already, and you can always move it when ever you need as it doesn't HAVE TO BE bolted down to function like a lathe or car lift

@RestoreIt Жыл бұрын

Interesting... Cheers for that info. I'll bear it in mind and see how I feel.

@stevebrown5145 Жыл бұрын

Agree, even better if you can board the pallet and fix the compressor securely,then you know its not going to move,or come adrift if you move the pallet.

@Watchyn_Yarwood Жыл бұрын

@@stevebrown5145 Totally agree! I left my 80 gal, 5 hp on the pallet. It's quiet, the pallet absorbs vibration. If you want, put a bit of wood trim around the pallet and no one will ever know the difference.

@mathiasdm98 Жыл бұрын

Altough it is not recomended by the manufacturer, you can leave it on the pallet. Just put some rubber pads underneath the pallet to isolate it from the floor so vibrations doesn't get transfered to the floor (probably the wood will also dampen it already). By the way, great machine it is! CP has quite some good quality stuff! If you service it on a regular base, it will serve you well!

@pyro323 Жыл бұрын

No! Wood rots and when it does that expensive compressor will fall to the floor and get damaged! It needs to be bolted to the floor with vibration dampners.

@gregoryschoos4184 Жыл бұрын

I guess there might be a new Vixen Aquablast under the blanket ;)

@PntBtrNjelus Жыл бұрын

Thats what I am hoping for too, have you seen M539 Restorations?

@RestoreIt Жыл бұрын

Stay tuned Gregory!

@adangsugiri1700 7 ай бұрын

Good job

@BartmanLA323 Жыл бұрын

As always, great job on moving to make what will be an amazing working space for all your projects, seriously impressed with your though out process for all that you're doing now, professional grade is always the way to go, but holy COW, I looked up the cost of that compressor, incredible! Really really hope you get a lot more subscribers and views to help offset these costs as well as project jobs and more restorations as well! Keep it up!

@RestoreIt Жыл бұрын

Thank you, Bartman! It was a bit of an investment, as is all of this new equipment. But this is what I need to be able to put out one video a week, on a consistent basis. The long term goal is for two episodes s a week. All of the good stuff comes with consistent, high quality content and this equipment is going to get me there. Cheers

@pedrosantos4368 10 ай бұрын

AWESOME

@ianm2719 Жыл бұрын

Looks like a stunning compressor, screw comp is way more efficient. With CP you can't go wrong in my view. Well done

@RestoreIt Жыл бұрын

Cheers, Ian. And I totally agree. Top quaility stuff.

@Morinaka25 Жыл бұрын

The advantage of doing this for so long is now you know exactly what you need and can spec it appropriately. Did you sell off that old colchester lathe from the old shop? or is that still a future project?

@RestoreIt Жыл бұрын

Spot on Morinaka, it just takes time... And I actually did sell the compressor, i changed my mind on it as I want something a bit newer, and also, I just couldn't bring myself to take it all apart, because it was working so well as it was, I feel I would have only made it worse...

@GstarCurtis Жыл бұрын

Have you considered getting air hoses in rolls that hangs on the walls instead? Makes it much cleaner and easier to use.

@RestoreIt Жыл бұрын

Hey Simon, I left one of these at my old workshop sadly. I will be getting more of them though yes. At some point an air system will be installed so everything is hardwired in, including some hose reels.

@bobjoncas2814 Жыл бұрын

...LOOKIN' GOOD, KEEP SAFE..

@RestoreIt Жыл бұрын

Good to see you Bob! You too.

@BEZ_KYPUR Жыл бұрын

Огромнейшее спасибо за видео

@RestoreIt Жыл бұрын

Thanks for watching!

@andrethib Жыл бұрын

my guess for the new equipment under the blanket - a Time Machine, to get NLA parts for the e30s

@RestoreIt Жыл бұрын

You've made what is actually under there seem rubbish, haha! Not really... But I wish it was one of those! ^ Cheers Andre!

@chomerly Жыл бұрын

Have you considered fabricating a dolly for the compressor? It could be really hand to have it on a set of wheels so that way, you could move it around the shop if you ever need to. At least it would save you having to enlist the help of four people to get it moved.

@RestorationApprentice Жыл бұрын

Loving the new workshop! Will you be getting vapor blasting cabinet?

@RestoreIt Жыл бұрын

Thanks dude! I will be one day yes!

@70mmbobbyj Жыл бұрын

A suggestion for the roof lights, you can get double wall polycarbonate from most DIY shops. looking forward to future installments.

@RestoreIt Жыл бұрын

Thank you for the suggestion Bobby! I'm glad you're enjoying it.

@jabjab12 Жыл бұрын

The best Man Cave

@wolf1438 Жыл бұрын

I am really curious about more content because your current ratio is one new workshop to two car projects.

@RestoreIt Жыл бұрын

This workshop is going to change that!

@tp8150 Жыл бұрын

YOu made me desire this compressor

@RestoreIt Жыл бұрын

It's one hell of a machine. I'm a bit over excited about it!

@DowntimeMedia Жыл бұрын

That compressor site link is suspicious as hell 🤣 things a beast though, makes me wish I had one!

@RestoreIt Жыл бұрын

How? But absolutely a beast.

@DowntimeMedia Жыл бұрын

@@RestoreIt cp has poor connotations as an abbreviation lol

@IUMadBroI Жыл бұрын

Is the compressor really that quiet, amazing

@RestoreIt Жыл бұрын

It's amazing!

@tinman7551 Жыл бұрын

Yay !!. I’ve watched every single workshop video. The Spanish build was my favorite. I can’t wait to see this new space. I’m really enjoying the new channel schedule and direction. 🥰☺️😎

@RestoreIt Жыл бұрын

Thank you! Glad you're enjoying it TinMan!

@tinman7551 Жыл бұрын

Very much so. This is my absolute favorite restoration channel on KZfaq period. 😊

@dhes2809 Жыл бұрын

Guess you got a good deal on the compressor?

@samjones8565 Жыл бұрын

Aqua blast cabinet under the cover I wonder🤔

@RestoreIt Жыл бұрын

All to be revealed!

@MegaDirtyberty Жыл бұрын

I replaced the skylights in my workshop with clear roofing, I keep thinking I have left the lights on, it made a massive difference to the light level in the workshop.

@PntBtrNjelus Жыл бұрын

Please tell me what's under the sheet is a Vixen vapor blasting cabinet like M539 Restorations has!! Those things are amazing, also I have been drooling over those Chicago Pneumatic screw compressors for awhile, congrats.

@RestoreIt Жыл бұрын

I'm not giving anything away Skinner! And thanks, I'm in love!

@pmyhill Жыл бұрын

What coating are you using on the floor ? Interested in doing my garage floor as part of new refresh

@RestoreIt Жыл бұрын

Garage/workshop floor paint on UK eBay, just search "Light grey garage floor paint"

@peterwarner8541 Жыл бұрын

Vapour blaster.

@RestoreIt Жыл бұрын

I'm not giving anything away! :)

@stefanramirez1999 11 ай бұрын

How is e30 m40 rebuild going?

@notthisguyagain8557 11 ай бұрын

How long did this take Steve?

@E-hab Жыл бұрын

Looks like a good pallet so it's better to leave the compressor on it.

@RestoreIt Жыл бұрын

I think I'm going to you know...

@RIS533 Жыл бұрын

You get what you pay for with this guy. He is straight as a dye

@ilifirdaushamzaah95 Жыл бұрын

Minute 1.05 what model your phone?

@RestoreIt Жыл бұрын

It's a very broken Samsung note 20

@baggedr32mk5 Жыл бұрын

Sandblasting cabinet under the blanket?

@RestoreIt Жыл бұрын

I'm not giviing it away just yet!

@nicosand86 Жыл бұрын

how many times are you planning on changing workshops?? :D and what was the problem with the previous one?

@RestoreIt Жыл бұрын

This will hopfully be it for a long time now! The old one was far too big and dark.

@nicosand86 Жыл бұрын

@@RestoreIt hahahaha, to dark is easy to fix with enough LED lights in the roof :) I'll give you 2 years before you've outgrown this new one. You're getting far too experienced to be contained :D

@weemanling Жыл бұрын

No noise issues with the compressor being in there?

@RestoreIt Жыл бұрын

Noise cancelling headphones solve that issue thankfully.

@weemanling Жыл бұрын

@Restore It I did sort of jump the gun with the comment before you got to it in your video, but I'm glad you've got a simple work around it.

@danielprivate7442 Жыл бұрын

I'm gonna guess; the thing under the blanket is a water wall paint capture system. (you said you wanted one)

@RestoreIt Жыл бұрын

I don't want to give anything away! :D

@danielprivate7442 Жыл бұрын

@@RestoreIt Congrats, you sound really pleased with your new setup and that compressor is the real deal.

@syedminhazuddinrizvi3068 Жыл бұрын

When we're gonna see E30 engine reassembled ? Where's the block ?

@davidpaulsen2681 Жыл бұрын

You really need to invest in a hydro blasting machine instead. it is less harsh on the materials you are trying to clean and effective. it tends to not remove excessive materials on the piece you are trying to save like sandblasting.

@RestoreIt Жыл бұрын

Thanks for the advice David, do indeed intent to get one asap! Thanks.

@RIS533 Жыл бұрын

Even for workshop videos you go the extra mile.

@cl500amg2 Жыл бұрын

Are them old panels asbestos ?

@RestoreIt Жыл бұрын

Hey CL, no they are not

@cl500amg2 Жыл бұрын

@Restore It Okay great and excellent work by the way..

@philipboy88 Жыл бұрын

your screw compressor will screw you some day if you need to replace the oil filter the display will lock the machine until you need to reset the timers inside the password is well hidden on the internet, i believe its 9989. hope it will help someone some day

@adcampo7601 Жыл бұрын

Isn't this your 3rd or 4th new workshop?

@RestoreIt Жыл бұрын

4th Workshop in five years, yes. If it isn't right, fix it!

@andrewedwards6548 Жыл бұрын

I wonder if that other machine is a press or a panel shaping tool hmm 🤔

@RestoreIt Жыл бұрын

You've reminded me I still need more tools! haha

@andrewedwards6548 Жыл бұрын

@Restore It As a mechanic you always need more tools it's a vicious circle 😂

@LearnToRace Жыл бұрын

Nothing to do with your video but the link for the babbel isn't working

@RestoreIt Жыл бұрын

Thanks dude, I'll look into this.

@LearnToRace Жыл бұрын

I'm on mobile so might be something to do with that 👍 I know a little Spanish but going Mexico in October so would like to learn more before then, out of curiosity too how much do you pay for your new unit? I've always wanted one but never been able to find something that doesn't costs thousands a month

@niek7808 Жыл бұрын

I thing you should invest or build some new workbenches, because the wood is not cleanable and absorbs which makes it look al quite dirty.

@RestoreIt Жыл бұрын

I've just done a fair bit of investing so I'll use them for now, but I would love some new ones!

@mbvalency Жыл бұрын

very nice video overall, but too much advertising for the compressor, sorry

@RestoreIt Жыл бұрын

You'll be seeing a lot more of NCA, sorry!

@wombleflump1 Жыл бұрын

Just a comment for the sake of leaving a comment😊

@dangerousandy Жыл бұрын

Good evening

@RestoreIt Жыл бұрын

Afternoon

@only1stefan Жыл бұрын

that looks the same as a abac compressor i wonder who manufactures them

@RestoreIt Жыл бұрын

Atlas Copco :) Good stuff...

@ashman8613 Жыл бұрын

Looks similar to an Atlas Copco compressor as well.

@michaelwalker1145 Жыл бұрын

Multibrand . Atlas Copco make them under different names.

@zal_models Жыл бұрын

enough with the compressor already!!

@RestoreIt Жыл бұрын

More compressor!

@j.d.1966 Жыл бұрын

this was basically a giant ad for the compressor, cmon man....

@RestoreIt Жыл бұрын

When are you buying yours?!

@j.d.1966 Жыл бұрын

@@RestoreIt Depends on what they pay. Maybe I should make a video on them.