I rebuild 18V Battery for Dewalt XRP Drill

Рет қаралды 724,842

3 жыл бұрын

This project is related to my previous video "Cordless Drill Restoration | Dewalt XRP 18V TYPE 1" • Cordless Drill Restora... that I restored only the drill and replace the old battery by the new one. Now I rebuild that old battery by upgrading it to Lithium battery with BMS 5S100A. This is my first project with an 18V battery pack. I find it is more different than rebuilding 12V 3S and 14.4V 4S because I spent more time in soldering. Although it was a little difficult, I learned something new from it. I feel really satisfied with this result, the battery is performing very well.
Battery Rebuild Items
- 5 cells of Lithium battery 18650 3.7V 3200mAh
- 1 BMS 5S100A
- 1 Buck Converter
- 1 Power Charger 42V
- 8 Battery Brackets
I hope you find something useful & enjoy this video!
I'm happy to receive your feedback, advice, suggestions to improve myself.
You are welcome to ask the question, I will try to answer your question ask I can.
!!! I apologize for the mistake if I have made in this restoration !!!
**I still keep some parts, I want to save the world's environment**
--------------Thank you so much for Likes & Comments--------------

Пікірлер: 291

@nissanman5738 3 жыл бұрын

You make the best videos no talking no music just pure genius thank you so much

@gear_show 3 жыл бұрын

I'm so glad that you like it. Thank you!

@little_brat. 3 жыл бұрын

Mmm.. I love that part - no music, no silly talking, just pure enjoyable job well done.

@nissanman5738 3 жыл бұрын

Totally agree

@JonathanRodriguez-qe2vh 3 жыл бұрын

little_ brat wkkwkl

@Papa_Kemsu Жыл бұрын

Me too. Music = dog, talk = eat shjt

@juancastillejo7006 10 ай бұрын

Que buen video y sin esa tortura de música de fondo.

@alanerickson3075 3 жыл бұрын

Watching you rehabilitate these old tools destresses me I really appreciate that thank you .

@jamiewolfe1540 Жыл бұрын

Thanks for the video. No dumb intro and crappy music. Perfect 👍

@gear_show Жыл бұрын

Thank you! I'm glad you like it.

@1971Sdiaz 3 жыл бұрын

I'm not into this gears, but just to say the final work is absolutely awesome. I enjoy and relaxing watching this kind of videos. Very great work.

@Alex-rr7qc 6 ай бұрын

So few words but probably the best video on this topic I've seen

@comesthru 3 жыл бұрын

Very professionally done. Answers all the questions I could think of and then some.

@Drd4all 3 жыл бұрын

I see the changes in the way you film the videos, keep up the good work 😁👍🏻

@mp180170 3 жыл бұрын

Using that water pipe was genius!!! Thanks my friend from uk 🇬🇧👌🏼

@johnpartridge7623 Жыл бұрын

Good job mate & now I'm going to do the same to my Drills, thanks for sharing 👍👍👍👍👍👍👍

@mehmetdas5759 3 жыл бұрын

You the best repair men i ever see

@taunteratwill1787 3 жыл бұрын

So you got blind at a young age?

@gear_show 3 жыл бұрын

Thank you so much!

@SFCrafting 3 жыл бұрын

kzfaq.info/get/bejne/sNyjaLir1MnSlqM.html

@yeagerxp 3 жыл бұрын

Well done 👍👍👍. Thanks for sharing

@aserta 3 жыл бұрын

I like the fact that you don't complicate yourself when making these batteries. I've seen a few other battery makers try to combine various types to get the most power possible and it seems like such a risk for what is an unrealistic reward. In other words, too good to be true. I'd rather + the original by a decent margin and have a dependable battery rather than a potential risk. So kudos on that too.

@gear_show 3 жыл бұрын

Okay, thank you for sharing!

@FVBmovies 3 жыл бұрын

Disagree. I refuse to spend 100 USD or more for genuine NiCd battery, because they aren't made anymore (screwdriver is obsolete, but still works). Besides NiCd degrades by months if not in use.

@shamoolkhanhorrorchannel5712 7 ай бұрын

I love it ur style, i used my drill on car battery 12v 38 amp. It was amazing work, i followed your instruction and renew my old battery and i m so happy its work so nice. ❤

@troyna77 3 жыл бұрын

This video is great! It shows you how to build a rechargable battery 18v battery pack. And if you have $priced these battery packs, you will find this video a great help.

@emawaldi 2 жыл бұрын

Perfect work, perfect video 👍

@aserta 3 жыл бұрын

The videography is getting better and better, dunno how many comment on that. So good job. :D

@gear_show 3 жыл бұрын

Thank you, I'm glad to hear that.

@Denis7947. 19 күн бұрын

Im happy that we changed from nihm to li-ion

@gear_show 14 күн бұрын

Yes, I'm glad you like it.

@prasadvn524 3 жыл бұрын

Nice job. your spot welder is an asset.

@johnbesharian9965 3 жыл бұрын

Nothing like now having to buy a spot welder in order to save money on a battery or three. (As I always say: "It's impossible to have too much money, too many tools, too many supplies/spare parts, and, especially, too much room to use and store them in".]

@LewisDodgson1 3 жыл бұрын

Thank you for showing me how much of a pain in the ass this is. I'll just buy the lithium adapter!

@user-zk8yl1fz5l 3 жыл бұрын

I was waiting for your new post

@sebastiancardoso3234 3 жыл бұрын

Muchas gracias por compartir tu conocimiento me gustaría consultar cuanto tarda en cargar la bateria

@taimurkhan4300 3 жыл бұрын

Very nice sir good work keep it up

@simonelson7043 3 жыл бұрын

Great video, as always. You mention a buck converter. Can you be more specific as you were with the other pcb used. Huge thankyou and pleSe keep it up.

@Dennis-mq6or 3 жыл бұрын

Same system and same board that I used. I didn't have the proper diameter piece of plastic that you did, so I drilled out the dead NiCad. It charges fine in the DeWalt charger. I have heard people say that theirs didn't. The only difference I can imagine is that I left the 10K termistor attached... Maybe the DeWalt charger checks for that...

@santiagomagdaleno6897 Жыл бұрын

muchisimas gracias por compartir tan valiosa informacion y tan profesional. Feliicidades!!!!

@gleibsonsantos9460 3 жыл бұрын

Amigo seu teu fan tento ser parecido com vc nos meus consertos parabéns vc e fod4

@powertoolsrepair 2 жыл бұрын

nice rebuild

@franklinlopez8850 3 жыл бұрын

It was very helpful. I was wondering what it is make and model of the machinr you used to weld. I been made manually please let me know thank you

@donatomauriciomatias6636 3 жыл бұрын

trabajo muy profesional gracias por compartir conocimientos PERU.

@MitchellCamps 3 жыл бұрын

This was great!!

@gear_show 3 жыл бұрын

Thank you!

@hectormendoza4158 Жыл бұрын

Buen trabajo 👍 y una belleza de soldador de puntos..

@eddieli16818 3 жыл бұрын

thats crazy, batteries should wrap up with insulation to prevent short in case the casing is damaged

@llenn1910 3 жыл бұрын

Ok, i'll subscribe because this is amazing

@edgarnino1537 3 жыл бұрын

Gracias por compartir su conocimiento. Me gustan todos los sonidos que se producen durante la reparación.

@gear_show 3 жыл бұрын

Un placer, me alegro de que te gusten

@fouadsaid7006 Ай бұрын

Good job

@selfrestoration9564 3 жыл бұрын

Good work Done 👌 . Thumbs up 👍 👏 👏

@gear_show 3 жыл бұрын

Thank you so much 👍

@selfrestoration9564 3 жыл бұрын

@@gear_show welcome ☺️

@Romek33 3 жыл бұрын

Let me give You little hint. Please start using thicker cables when You are connecting B+ and B- to BMS and from BMS to battery connectors. There is a lot of amps there. Your cables looks like 1,5mm² or around this. Look how thick original cables are. Its for Your safety. White ones in this video are good for balancing but not for carry load like 50A...

@gear_show 3 жыл бұрын

That what I want to hear, thank you very much for your hint!

@mcg6762 3 жыл бұрын

Also the lithium cells used here are no way near rated for the current needed under heavy load. This is not a safe build.

@cosmos69 3 жыл бұрын

Correct ! I highly recommend you to use copper wires.

@miguelangelmontiel962 3 жыл бұрын

Mis respetos amigo te la sabes 😊😊😊

@salahsalman5863 3 жыл бұрын

Thank you brother

@rachelletobias7402 3 жыл бұрын

Fascinating

@gururajkamath5188 5 ай бұрын

Very useful👍👍

@zoltannagy3211 3 жыл бұрын

Szép munka!👌👌👌

@sajidmalik5269 3 жыл бұрын

Bro you are a magician i was just thinking about upgrading mine from ni-cad to Li-ion

@gear_show 3 жыл бұрын

Oh, because our sense is connected.

@sajidmalik5269 3 жыл бұрын

That's True

@sajidmalik5269 3 жыл бұрын

@reedhan paliwal means?

@tvpartscompany8197 3 жыл бұрын

rebuid 18v battery look good

@lovepreetsinghgill517 2 жыл бұрын

Excellent !!!!!

@HenriqueSampaioWoodturning 2 жыл бұрын

Great video. Very useful. I am planning to do the same with my 6 Dewalt NiCd batteries. I would appreciate if you could answer this question though ... have you used power supply with 48V output because you had it on hand or could I use 24V output as well ? Thanks a lot.

@inhchinh832 Ай бұрын

Thanks your videos

@albertosi4772 3 жыл бұрын

Hello, first of all I would like to thank you for your videos that inspire you to want to be a restaurateur. I would like to know where and how to buy those lithium batteries or will repair the battery of my drill

@captainyak3948 Ай бұрын

Nice work even though 3 years ago :)

@mpyoung33 3 жыл бұрын

Are there any updates to this build? Does it still work? I ordered all of the necessary party to rebuild 20 with the exception of the batteries. I’m going to wait until China delivers before I order the batteries. Any recommendations for a battery source?

@anasaliyarkunju6746 2 жыл бұрын

Buck converter is used for increasing the voltage and can be used as charge er for battery pack of 12 18 21 24 etc

@manuelsoul4699 3 жыл бұрын

Gear Show, the best

@gear_show 3 жыл бұрын

Thank you Soul Man!

@rajgj7041 3 жыл бұрын

U was used a 4s bms , thats why the red light was turned on on the first place , after look like u remove that little diod and things start to be normal . But in my opinion u need a biger wirig on negative side , and a constant amperage too ,about 1 amp in your case.

@kadirince 7 ай бұрын

I have the same product now. If I use a 5s 25 Ampere BMS, will it work?

@netdedouga 2 жыл бұрын

hi, does this board have cut-off protection when voltage goes below certain value?

@michaelbell9026 2 жыл бұрын

@Gear Show Hi! Did you remove a component from the gms circuit board? I'm following the video but i have two batteries that when measured indicate 0V which is a bit odd. So I replaced them but same result. Maybe the wiring? Anyway hope I get it to work thanks for the video!

@miguelmorales9511 3 жыл бұрын

I have a question, do you supply the products mentioned in the video to repair the drill?

@wasimedoo1506 3 жыл бұрын

I love to get replacements battery like that for my XRP card less drill it's hard to get battery

@tmburns4 2 жыл бұрын

Awesome video! For those of us who don’t have a nice spot welding machine like yours, do you know another way to connect the batteries together? Is traditional soldering an option? Love the channel-subscribed!

@catsnotcops_ Жыл бұрын

Since no one answered yet. Yes, soldering is an option, if done correctly. You mustn't overheat the cells, therefore you need a soldering iron with at least 80W and big and solid tip, so you only have to touch the cell for a max of 2-3 seconds for the solder to flow. I have seen tests where, if done correctly, it doesn't affect the capacity of the cells at all.

@gerardoperez1504 2 жыл бұрын

Muy buen video. Tengo uno de 18v y me.pregunto si puede llevar un pack de 4s. Ya que no hay mas espacio para una 5ta celda. Gracias de antemano

@williamssandoval30 Жыл бұрын

Es necesario usar el convertidor? O con un cargador de salida 18 a 21 volts ?

@stevenebejer3916 Жыл бұрын

Great video, thanks. Can I use the original charger or won't work with lithium batteries?

@eduardolizarraga9258 3 жыл бұрын

how the charging amperage is calculated on these batteries, you showed a 2000 milliamp charger, as you calculated???

@gordbaker896 3 жыл бұрын

Fantastic as usual. Wish you could rebuild some Makita betteries for me.

@gear_show 3 жыл бұрын

Maybe one day! thank you for let me know :)

@santhos22 3 жыл бұрын

how do i know which protection plate to use? I have an 18v screwdriver. it has 5 18650 batteries at the factory.

@geraldchaves8607 3 жыл бұрын

Nice vídeo , bro !! Like

@gear_show 3 жыл бұрын

Thanks for the visit

@guiterman6263 3 жыл бұрын

I have some drills like that dude their a few years old thats what i done rebuild the batteries

@panasonictechnokovic 2 жыл бұрын

Is it possible to use a 110v charger (Ni CD battery) then use a low voltage circuit like you to charge a DC 12.6V LiOn, Lithium battery? I have a 110V Black Decker charger but the Volt outputs 18V, even though it's charging for a 12V battery. Thank you Gear Show. Hoping for an answer.

@yashpalsinhzala4345 Жыл бұрын

Thanks sir 👌👍👍🙏🏻

@user-kt2hb8xr3p 3 жыл бұрын

Thanks 👍👍

@YIB110 3 жыл бұрын

I did same way what you did. But as soon I connect B1 wire to bms. The wire catch fire. Could you please tell me what I am doing wrong.

@sajidmalik5269 3 жыл бұрын

Bro at 9:10 when you try to remove spot welds on ni-cd, next time use a tiny drill bit in the spot welds it will weak welds and it will help

@69-72USMC 11 ай бұрын

Use a Dremel grinder to weaken the welds, less chance of drilling thru to battery.

@Fethi-fp8xb 3 жыл бұрын

Hi i have a question is it possible to use the original charger on the new batteries

@netdedouga 2 жыл бұрын

The drill's official battery has a lable says 18V. Does using 21V battery damage the drill?

@anasaliyarkunju6746 2 жыл бұрын

After re. Building the battery pack how much volt is applied to charge for this battery pack

@sailingbebe 3 жыл бұрын

Can you try to do the same thing with Milwaukee 18v nicad to lithium battery? Some reason all related videos only showing about the converter.

@chilenamixtecamusicdcmusic9569 3 жыл бұрын

My question is why my bms in b1 and b2 has 3 points to solder, is it correct if I connect it above the three?

@abdalqadr1 Ай бұрын

Thanks❤❤❤

@antonioboccia3089 3 жыл бұрын

hi bro, I can't find the 3200mah batteries do you have a link where to buy them? Or if I replace them with 3500mah batteries, do I have to change something else too?

@user-ov9kp8ho5q 3 жыл бұрын

Хорошо протестировал , тиски выдержали .!!

@nikolaislobodian2920 3 жыл бұрын

LOL

@laerciodogas10 8 ай бұрын

Uma Parafusadeira Dewalt XRP antiga 14,4v, coloquei uma bateria de 16,8v e ela tá funcionando de boa, estou com vontade de por uma bateria de 20v será ela guenta de boa !?

@julioperla7675 3 жыл бұрын

Buen trabajo, pero no has pensado en usar celdas 26650? tienen el mismo tamaño de las de NiCd y el mismo voltaje de las 18650. Como siempre, te sigo!!

@SFCrafting 3 жыл бұрын

kzfaq.info/get/bejne/sNyjaLir1MnSlqM.html

@bigbossguitar 2 жыл бұрын

Where would i buy this kit and the charger,, thank you great video

@madmax5579 3 жыл бұрын

Nice job where did you bought your screw driver?

@joseluisprieto3438 3 жыл бұрын

IMPECCABLE AND BEAUTIFUL WORK I'm going to try to do something similar with mine, can I use 6 18650 22F 1A62 batteries recycled from a Laptop? It will be harmful to the drill if I use 6 batteries and a BMS 6S 12 A in Venezuela I only find 12 amps ... will it work?

@OrbvsTomarvm 2 жыл бұрын

im incredibly jealous.

@shamoolkhanhorrorchannel5712 7 ай бұрын

I made same but drill stop once i do pressure on concrete.

@toolmanmakita7120 3 жыл бұрын

O remember that drill

@sokoloft3 2 жыл бұрын

Will the mA matter for the charger? I have a few 19v 3.95A chargers. Would that be too many mA for the batteries? Best video I found on this. I have maybe 10 of these. Can't see paying $100 for another. Can literally just buy a new drill for that price. Thanks.

@NgaNguyen-ku6gz 3 жыл бұрын

Cực sạc và pin anh đang dùng.cảm ơn bạn

@anasaliyarkunju6746 2 жыл бұрын

How this convert or is used for charge lithium ion battery pack reply details of this

@franciscopertierra768 Ай бұрын

I connected exactly like you but my drill goes only like one minute a drain the batteries and if I recharge them in two three minutes like goes green but won’t last what I could do wrong?

@Lem-Tamme 3 жыл бұрын

Good 👍

@ruimardetarcioagapito6644 3 жыл бұрын

Boa tarde,gostaria de saber quanto fica para você fazer está adaptação,estou em Goiânia -go,tenho diversas baterias deste modelo de 18v

@user-pc4pz3ik3q 2 жыл бұрын

Can you tell me how battery AMP use , can i use 2 AMP 18650 ?

@chrislincoln489 2 жыл бұрын

Thank you for the Idea. I have just one question. What if I didn't use the BMS and just put it back on the charger. That should work also, right.

@JonAhlquist 2 жыл бұрын

No, it won't work for long. With multiple batteries, one would discharge more than the others, and they would not recharge equally. Soon, it would stop working.