I Should Have Bought a Bobcat Skid Steer

I Should Have Bought a Bobcat Skid Steer - Here is Why

Рет қаралды 86,435

Күн бұрын

Bobcat Skid Steer review
Bobcat is offering special rebate to viewers of my channel. Here are the rebate amounts and the participating dealerships:
$2,000 rebate on 4 and 5 series tractors
$1,000 rebate on 2 and 1 series tractors
$500 rebate on any lawn mower

Store Locations:
Midwest
Bobcat of Oklahoma City, OK
Bobcat of Goldsby, OK
Bobcat of Albuquerque, NM
Bobcat of El Paso, TX
Mountain West
Intermountain Bobcat of Salt Lake City, UT
Intermountain Bobcat of Orem, UT
Intermountain Bobcat of Ogden, UT
High Desert Bobcat of Nampa, ID
High Desert Bobcat of Idaho Falls, ID
High Desert Bobcat of Twin Falls, ID
High Desert Bobcat of Burley, ID
Bay Area Bobcat
Bobcat of the Bay Fremont, CA
Bobcat of the Bay Contra Costa, CA
Bobcat of the Bay Santa Rosa, CA
Bobcat of the Bay Gilroy, CA
Check out more of our tractor videos here:
• John Deere 2038R and c...
To interact with me personally, join the Rockhill farm Facebook group here:
/ 1270496403596230
You are welcome to join our Facebook group where I will be posting the Woodland Mills products
groups/89211...
Rockhill Farm is a daily equipment and rural living vlog. We mainly focus on tractors and working outdoors.
I really appreciate you taking time to watch this video. If you enjoy this type of content Check out some of the following links to support our channel.
If you are interested in a rock Hill Farms T-shirt check out our merch store
rockhill-farm.creator-spring....
Please subscribe to our channel here: / rockhillfarmandhomes
Follow on Facebook at
/ rock-hill-farm-1020506...
You can now support the channel by buying us a coffee at the following link:
www.buymeacoffee.com/rockhill...
#farmlife #homestead
We participate in affilitate programs including the amazon affiliate program. If you purchase products using our links we may earn a commission

Пікірлер: 239

@RockhillfarmYT 24 күн бұрын

Bobcat is offering special rebate to viewers of my channel. Here are the rebate amounts and the participating dealerships: $2,000 rebate on 4 and 5 series tractors $1,000 rebate on 2 and 1 series tractors $500 rebate on any lawn mower Store Locations: Midwest Bobcat of Oklahoma City, OK Bobcat of Goldsby, OK Bobcat of Albuquerque, NM Bobcat of El Paso, TX Mountain West Intermountain Bobcat of Salt Lake City, UT Intermountain Bobcat of Orem, UT Intermountain Bobcat of Ogden, UT High Desert Bobcat of Nampa, ID High Desert Bobcat of Idaho Falls, ID High Desert Bobcat of Twin Falls, ID High Desert Bobcat of Burley, ID Bay Area Bobcat Bobcat of the Bay Fremont, CA Bobcat of the Bay Contra Costa, CA Bobcat of the Bay Santa Rosa, CA Bobcat of the Bay Gilroy, CA

@donCesc19 Ай бұрын

This guy should get a raise... Seriously... So much knowlege, tips, stuff that you know if you're into machines, if you operated them... Very impressed

@rayrayslawnlandscape2008 Ай бұрын

he is for sure top of the line salesman

@MartyHenderson-ie9sp Ай бұрын

It is very refreshing to see someone that knows exactly what they are talking about and not just slinging out sales words. Thanks for an awesome video Brock.

@RockhillfarmYT Ай бұрын

Thanks

@stump-bossBIll Ай бұрын

That's pure GOLD for a guy like me....Owner - Operator set my sights on a forestry mulching - land clearing operation - Pure Gold! I have a Bobcat mini MT100 and my local shop is also pure GOLD- they have been a Bobcat dealer forever (over 30 years I think) this guy is definitely a great spokesman, keeping it real, certain machines do certain things better, but Bobcat seems to be accelerating changes for the better (by Doosan) and the motor with no RE-GEN is a big deal! Thanks for sharing .....BROCK ON!

@luisarevalo8394 Ай бұрын

Is that the gen perk only for the 2024 model years?

@winkdinkerson7190 Ай бұрын

I like this Sales dude. Totally objective, and doesn’t run his competitors equipment down. Buddy, I wouldn’t dump the Deere because of one minor inconvenience. In addition, you’re comparing a 74 Horse JD to 105 Horse Bobcat.

@alvinmitchell6799 Ай бұрын

He was comparing his 74 HP Deere to a T66 or 75 HP Bobcat.

@TheRustyGarageandHomestead Ай бұрын

Brock, thank you. That guy was very knowledgeable. Those bobcats are nice

@LHCOG Ай бұрын

I own a kubota 97-2 for my construction business. Yes the door rattles some and might not seal as well but I'll still take the accessibility any day of the week over a swinging door.

@notsure6182 Ай бұрын

the Kubotas I have run were nice machines, I hate my bobcat door. daily removing it to work and putting it back on end of day for security sucks

@rayrayslawnlandscape2008 Ай бұрын

Im with you man - its a no brainer and i bet Bobcat engineers are working around the clock to create a roll up door system. It would be bad business if they are not! My kubota 75-3 door dont rattle any

@notsure6182 Ай бұрын

@@rayrayslawnlandscape2008 bobcat engineers already missed the boat. this is the 'new' and de-proved R series.

@rayrayslawnlandscape2008 Ай бұрын

@@notsure6182 I would be really depressed if i spent my life savings on a machine and i was stuck with the swinging door! NO WAY

@rayrayslawnlandscape2008 Ай бұрын

@@notsure6182 Thoe this salesman is really informative

@dustdevl1043 Ай бұрын

Man, that guy was a wealth of knowledge! He made your job easy!

@RockhillfarmYT Ай бұрын

Definitely

@timbradeen8459 26 күн бұрын

Bobcats cab is the best, and the operator was in mind when designing the machine. Bobcat is the best. Nice job on getting this guy to explain stuff. We do forestry work and he is 100% spot on accurate on everything he said. I'm in the process of upgrading my bobcat equipment. Thanks for the video.

@RitzWood32 Ай бұрын

We have a T76 and have zero complaints. This guy was very informative. Also learned about a few features I didn’t know we had lol Wish he had time to explain the left side control panel for the viewers.

@jrisnerny Ай бұрын

Very helpful. Good to hear the Bobcat guy say that all brands will have issues. Some minor, some major. But I think this is machine, not brand specific. All the major brands have sound machines, but there are lemons that get out from all of them. 3 years ago I was in the market for a skid steer to mulch. At the time Bobcat's biggest machine (870?) did not have built in extra hydraulic cooler, and forestry door was a big upgrade. My salesman said if I was 90% mulching I should look at ASV. I did and bot the 75, and upgraded to a 135 last year. Very happy. But I appreciated that salesmans honesty. 2 weeks later he called me saying I know you wern't looking for a mini Ex, but we had a customer order an E42 6 months ago (this was mid 21 during Covid shortages) and it is coming in next week. He couldn't wait and bot a used machine and want's his deposit back. Would I be interested? Went down, looked at it and bot it. What a great decision. Skid's work faster, but a mini ex is a swiss army knife. So a good salesman got me where i needed to go (not with him), but got a nice sale for his trouble. Lastly, unless you are mulching or breaking pavement, which require extra cooling and as much hydraulic HP as you can get, all major brands have good machines for dirt work, occasional mulching, farm etc. Get the machine with the best local dealer!

@mikeadams2339 Ай бұрын

Great to see why so many used bobkats r on the market. They are going NEW! Thankz for sharing. So many thangz to check out on a skid!

@GeneralBeefDip Ай бұрын

I have a 2022 T76 wide track for private use. I really like the machine. No dpf or blue government juice to worry about. The only issues I have had was a hose clamp recall on the radiator along with the radio loses communication (requires power cycle to come back - not many times). The only loss of power I have noticed was going up a steep hill while using a hydraulic function, but this was at a quicker ground speed. If I had to buy another one I would get a bobcat T66. Slightly smaller framed machine with the same 74 hp as the T76. The weight on the 66 is slightly less for trailering. The T66 can have counter weights added which can get the lift capacity closer to the T76. Looking to hopefully obtain a E42 or E50 R2 in the near future to complete the collection.

@paultheisen5290 Ай бұрын

Bobcat is Owned by Doosan. I don't understand why we keep selling off everything that was first built in America!!!

@gckshea Ай бұрын

$$$

@SteveinMississippi Ай бұрын

I guess the only upside is that Doosan is a South Korean company and not communist Chinese, but I definitely get your point.

@digginandbuildinwv7012 Ай бұрын

Have to talk to the folks who actually did it.

@digginandbuildinwv7012 Ай бұрын

And Doosan/Develon is making thier own ctl, dtl35

@johnf8877 Ай бұрын

Because libtards over-regulated and unions made it impossible to turn a profit.

@holland3g1 Ай бұрын

I've often bought something and regretted it, mainly due to not knowing as much as I should. Only way to learn is experience, or keep an old timer in your pocket. Appreciate you doing this, acknowledging your level of experience. We are all learning, nice to know you tv guys are too!

@maxd7228 Ай бұрын

Well, I’m sold. And I’m on the market for a skid steer. It’s great to have someone who knows what they are talking about and not a script reader. Nicely done, I’m seriously considering bobcat after this video

@michaellauritsen5433 Ай бұрын

I bought one came from CAT, had my eyes on a Kubota and nothing else. I demoed a Kubota and wasn't really impressed. I demoed the Bobcat, my dad stopped by a couple hours into me demoing the Bobcat T66, I opened the door and said I'm buying this. Comfort and power are hands down was better then CAT, Kubota and Wacker. You won't be disappointed.

@rayrayslawnlandscape2008 Ай бұрын

@@michaellauritsen5433 key phrase is you had to open the door- a HUGE inconvenience not being able to run the machine with door open. I did a video on this kzfaq.info/get/bejne/eJxgnLBlnpu0qH0.html

@charlesmacinnis7298 Ай бұрын

i watch a lot of videos and this guy is the best i have ever heard discussing this stuff

@notsure6182 Ай бұрын

yes, my local guys are terrible. this guy was very professional

@OneEyeCustoms Ай бұрын

I’ve owned two case skid loaders (wheeled) and now two Bobcats T650 and current T770 as well as E55 and E60 excavator. I like my bobcats!

@RockhillfarmYT Ай бұрын

Thanks for sharing Doug

@SetitesTechAdventures Ай бұрын

This is some great information. The width and 60/40 sound like good compromises that make it a better machine for most. I like the idea of a machine that is better for most loads, and you can easily add ballast for the edge cases. We had a bobcat when I was a kid and I liked it and its the brand I will probably get myself when I finally get a skid steer.

@patrickcorbett8361 24 күн бұрын

I'm impressed with the machine... whoever put that guy in sales is a genius ! He is what we all hope to encounter when we walk up to get the straight skinny on a machine. pc

@puddlejumper3534 Ай бұрын

Thanks, Brock. I am actually thinking about skid steer and grading information. Thank you very much. Great video.

@oakiewoodsman Ай бұрын

This is an excellent and informative video for sure Brock. That Bobcat rep was awesome! Nice to have someone who knows their stuff!

@Summitoutdoorproductions Ай бұрын

Yep BOBCAT. Good timing on the video. Locked in on a t62. Nice machines. Dealer has been great to deal with on excavator we have and other rentals plus very close. Thanks. Dave.

@timb2825 Ай бұрын

I love my old Bobcat T590. It is 10 years old and still running strong. If you do change machines, and no matter what brand you go with, I would suggest you get it with the 2-speed ground travel option, track suspension roller system and backup camera (for kids and animals at your place). I do find the door a pain with certain attachments installed but understand why it is like this. My door seals so tight that it is hard to latch unless the window is cracked open a little bit. Yes, the door is adjusted correctly. I do take my door off for most the year (except when it is extremely hot or cold) and have found this solves the problem with getting in and out. The door is very easy to remove, and install, and if the temperature does turn on you while it is off, you can still run the heat or A/C with the door off and not suffer. Good luck with your demo!

@notsure6182 Ай бұрын

the dance climbing off the machine carrying the door sucks, finding a safe place to store the door sucks. I think I need to make a door holder for my truck

@timb2825 Ай бұрын

@@notsure6182 Great points. I have also struggled with the things you mentioned. The upsides of not having the door installed do come with downsides. Hopefully, there are brilliant people out there, who design these things, that will come up with better solutions......

@Trucker4281 6 күн бұрын

I like the sales contact

@stevenerickson5449 Ай бұрын

What a great bit of information. Thank you.

@tx2sturgis Ай бұрын

That guy knows his product.

@mattmcc7930 Ай бұрын

Swing up door all the way. Our old 2009 bobcat tilt function spung a leak and we could not get loader all the way down, and was stuck in the machine until he crawled out the back. It was a huge pain.

@theamazinggang Ай бұрын

I have a T76 , plenty of power (more than I anticipated), no DEF, been a great machine

@johndeerefarmer4483 Ай бұрын

I have a Deere 329e compact track loader and a 320G skid steer. I have no issues with steering. My only complaint on my G model is the hydraulic pump is louder than the E model. I will stick with Deere.

@geraldhawkins2643 Ай бұрын

Man!!!! This guy has knowledge about the bobcat I've been looking at getting a different machine I own a bobcat t770 and nothing I've looked at compares to my t770 everything I've looked at is so slow I do row work and we run a brush cutter and nothing compares to the speed of my t770 and one thing I've noticed on other machines is I can't watch all my temps like bobcat does I can watch pressure and my temps all at once running attachments bobcat has got it going on listening to their customers!!!! Awesome video

@notsure6182 Ай бұрын

best machine available is the t770 IMO.

@terrytate6006 Ай бұрын

The Bobcat salesman is really good he could sell ski resort property in Kansas

@georgea6403 Ай бұрын

Lol. Maybe me think about the ski resort near Worcester Massachusetts. It was made on an old garbage dump. Maybe he was on the design team😅

@4MRanch Ай бұрын

Excellent, Lots of great info in this video. I really like the bobcats. Nice hat by the way

@olddodger7178 Ай бұрын

Great video. There is a nearby Bobcat dealer in Milford, PA. Will check them out.

@craigd1473 11 күн бұрын

Good sales rep for sure. These new Cat 255 and 265 fixing to put some pressure on them. Cat has been doing torsion bar suspension for quite some time, sealed one piece cab and the most quiet cab on the market. These newer R series machines are nice hope for their sale the Dooson part don’t run them in the ground.

@stevem6711 Ай бұрын

Old info on the Kubota. The SVL75-3 seals really well and vents are lower and upper. It also has addressed the multi-function capability with turning and operating the boom and AUX with an Advance Multi-function valve. Btw, I was traveling down I-77 North of Statesville, NC and saw the big Bobcat factory. They had many attachments in the storage lot.

@RockhillfarmYT Ай бұрын

I don’t have an opinion on that door because I’ve only ran it one time. When I record with a dealer, I give him the space to share his thoughts, but that doesn’t make them my thoughts

@samuelmarsico8103 Ай бұрын

I just tested a 75-3 and it still went dead trying to turn while lifting the arms. Kabota did a nice job and I was excited about it. Thought I had made up my mind to pull the trigger on purchasing but after actually being in one and then demo’ing the bobcat in the same day I ended up buying Bobcat (t770 loaded for 7k more)

@jasonpeters3228 Ай бұрын

I rented a tracked Manitou 1350 RT 2023 model year from Home Depot about a week ago. I used it for about 14hrs straight mainly for terracing a farm hillside. It didn’t like turn in its place either. I had to full throttle it and it barely turned acting like it didn’t like it. Other than that the joystick control and foot throttle was great. I own a old wheeled Bobcat that would cause too much compaction and fall off the terraces probably rolling down the hill.

@waylonvaughan7422 Ай бұрын

Will you do a review on the yanmar Skid Loader. I heard it has a lot of excellent features. Like extra Leg room Nice visibility from the cab. And protected high flow. Connections. On the boom. And maybe Cf. They will let you do a demo. That would be cool.

@s.powell335 Ай бұрын

I have a Case 430 skid steer with the Cummins 4BT engine. I operate a Premier trencher and auger with it. The Case 430 has the low flow hydraulics but I never had any issues as my attachments are geared for that. I never had issues with this machine. Highly recommended! I had a friend who had a paving company and he owned 15 Bobcat skid steers. He told me to stay away from them as Bobcat had too many electrical problems. He told me at any given time, he had only 9 of the 15 machines operational at once. That was a telling statement to me. I'm a Cummins believer as I own 2 Dodge 3500 trucks. Bought the Case and never looked back.

@MattyP0034 Ай бұрын

I’ve been running that T86 all week with a mulcher. It’s a beast and plenty of power and I’m not even using the super flow. Just basic high flow. It has a great cooling system as to the tier 3 870 that would over heat a lot. No complaints so far other than having to clean the air filter abt every 2 hours.

@plumberguy6334 Ай бұрын

Try adding the aspiration kit

@ronstopfer2315 Ай бұрын

Darned nice unit. I have a New Holland C345 now that I like. This C345 replaced my new C332, which I had a lot of trouble with. If I get another skid it’s going to be a Bobcat.

@anthonyg6924 Ай бұрын

Brock your Kioti comment about previously making the Bobcat. Kioti now has their own, and with the kioti name on it. It would be a great comparison between those two companies now that they're more independent of each other. I don't recall if you had a video on the kioti or not 🤷🏻‍♂️

@Jo-tw8kr Ай бұрын

+1 on that, would love to see a review of the Kioti trac loader.

@anthonyg6924 Ай бұрын

@@Jo-tw8kr Jo, so would a lot of other people too, my opinion 👍🏻

@JohnWinsemius Ай бұрын

Kioti only has a 70 hp model. no high flow yet and a non pressurised cab

@benjaminmiller6848 Ай бұрын

I got 3 bobcat love them

@tobinwatts3336 21 күн бұрын

The Kubota model 3 with its excavator door is amazing! It seals tight. We got cats where I’m working. The standard door is a pain if you ever had the latter. The seals on the standard doors seal from the outside to the cab. The excavator door seals from the inside. Which when you turn the heat or ac on it pushes or pressures up against the door which helps it seal even more. I highly recommend the Kubota. Great machine that u can get out of at anytime

@foonus406 Ай бұрын

That's quite the radiator they pack into those little units. Thinking about how a guy would clean it, you'd have to get an air hose under it and blow upwards to avoid blowing the mess into the fan and onto the engine.. Ran the Deere in the dry months last year and you would have fine dirt piled on that back lid over an inch thick. not sure how that horizontal rad position would handle it. Thank you both - Bobcat should loan you a unit after the work you've done here!

@bobme2787 Ай бұрын

I have a Case 1818 Skid Steer to help with projects around the house. I would like to get something a little newer and bigger in the future. I also have a Bobcat E20 Mini Excavator. My local Bobcat dealer has been great in helping with parts for the E20. It was a rental and came from FL. So it had some wear from abuse and heat so I replaced parts that some people may not. I use Fingerlakes Bobcat in Fairport, NY. The gentleman in the video was very thorough in explaining why his product is better than the competition while being respectful at the same time. Maybe I will have a Bobcat Skid Steer some day.

@RockhillfarmYT Ай бұрын

If you got a good deal dealership, that goes a long way

@tinkering123 Ай бұрын

Nice useful tool. Any make or model will do.

@user-hu7qv3jk4n Ай бұрын

I would highly advise you to wait until the new Deere P series comes out. It will literally burry a G series. They fixed and addressed a lot of current Deere issues. There are some big negatives on the Bobcat that weren’t mentioned. Also try recalibrating your hydrostats.

@mattywho8485 Ай бұрын

I bought a Kubota SVL-97 BECAUSE it has a roll up door ! I live in Vermont, and don't need air conditioning every day, but I do need to hear the guys working around me, and I need to communicate with the guys outside of the machine, something you can barely do with a closed front door and the engine running !

@OzarkGoat215 Ай бұрын

Only complaints I have with my 2021 T66 is the hydraulic QDs on the loader arm are too exposed (have to be careful with grapples) and also the ever-present electrical gremlins. Losing radio communication, camera stops working, etc. But otherwise, its awesome and does everything I need it to do...farm work and construction

@Mountaintoptractor Ай бұрын

My neighbor had bobcat for decades, always had nice new machines, he recently switched to a case minotaur, the steel track machine, he still has a rubber tracked bobcat, however he raves about the minotaur and its capabilities compared to bobcat.

@notsure6182 Ай бұрын

depends what you are doing. steel tracks wouldnt work for me

@AllAccessConstruction 13 күн бұрын

True... Everyone is decated to what they use

@lynnshomestead7545Johnlynn Ай бұрын

I look at it this way , buy something you can get parts easily, best service and that meets all your needs.

@northeasterndirtandpropert7974 Ай бұрын

Nice machine.I still like the simplicity of the Takeuchi and the Kubota's.Japanese refinement at its best.

@d5314ab Ай бұрын

I bought a new Bobcat E50-R2 Excavator a couple years ago. AC has never worked right. If it's over 80 outside it starts to get to hot inside. On the warmest days I'm lucky if it can keep the cab 10 degrees cooler than the outside temperature and it regularly gets into the 90's here(Southern IL). Also when it's humid at all out water starts coming out of the vents, a lot of water. The dealer has had the machine several times and hasn't fixed it. They claim that the AC is "within specs" . I've checked the temps at the vents and it varies between about 48 and 60+ degrees. As far as water from the vents blowing in my face, they said they were told by Bobcat to tell me to turn the blower down. The dealer admitted to me after the last service that they have a rental machine with the same problem. Other than the AC system I really like the machine, but at this point I will never buy a Bobcat product again. As far as skidsteers, I have a Case TR310B and love the machine. Plenty of power for it's size, good viability a comfortable cab.

@davidmays2161 Ай бұрын

If you like the bobcat you'll love the takeuchi

@Lefttackle79 Ай бұрын

😂😂😂

@rontopping2048 Ай бұрын

Takeuchi most reliable machine on market. For speed and comfort you purchase a bobcat.

@user-jd8xs3bn6f 29 күн бұрын

That’s interesting, I’ve never found my Deere to ever lack in power in any function. I have been looking at bobcats but I find them to lack the power that my 325 has. But they have many features John Deere doesn’t and the service at our bobcat dealer is so much better then our Deere dealer! Great video I love the comparison

@RockhillfarmYT 29 күн бұрын

Never lack power for pushing, pulling or lifting. Trying to turn while you’re doing a function seems jacked up to me

@user-jd8xs3bn6f 29 күн бұрын

@@RockhillfarmYT Honestly I haven’t noticed that point myself. I’ve been in machines for 10+ years now. I definitely wish I would have spent more time at bobcat I definitely would have bought a T66. But pushing power you’ll definitely miss about a John Deere the bobcat can’t touch the power of the Deere. Even in the turning I haven’t noticed a T66 being any better. What I have noticed in a T66 is it’s much quieter, it’s faster through its operation circle and speed. It’s 3x better on fuel!!! What a big deal when you run it all day as a business owner I wish I could save that! Their technology far exceeds John Deere. I’d 100% buy a bobcat. There are some things I dislike about my Deere. But power in turning with weight never noticed. What I do notice is when people say they lack power in turning while’s doing other operations they are usually in 2 gear and that in my opinion isn’t healthy operations in any machine even if it can do it iits premature wear 2 gear is to get from site to site minimal turning or carting materials not under huge stress. I see what to many final drives get blown because operators think you can be in 2 gear all the time.

@andrewbrisbane2831 5 күн бұрын

Bobcat is good for sure

@markstocks659 Ай бұрын

Great video!!!

@RockhillfarmYT Ай бұрын

Thanks

@user-mk7qq8rz1m Ай бұрын

I'm old I am sold I'll take one even though I'm retired and have no use for 1 now This guy was super awesome I hope he's a salesman for them too this guy if you're in the market and he just takes you on a tour of that machine you're would not have a doubt in my mind to go with a Bobcat even I heard all the garbage about them But I think the The worm has turned and Bobcat rain supreme

@joshuaplacka8480 Ай бұрын

Lol he is a good salesman that’s for sure. I’d still rather own a shovel before a bobcat and yes I’ve spent hours in the new models

@RockhillfarmYT Ай бұрын

I appreciate your opinion

@digginandbuildinwv7012 Ай бұрын

Im going demo the new cat 265 tomorrow but im going to swing by bobcat dealer on my way home, im curious now

@googleboy7 26 күн бұрын

If I buy another skid steer, it will have to feature side entry, so I can ingress and egress without having to crawl over or step under the load. It's not safe to go under an elevated load. Shalom/gw

@owenpederson5867 Ай бұрын

We have a John Deere 324G (it is the same as your skid steer but it has tires) and i think your turning issue is because you have tracks. Because we have never had that problem. I personally do not like Bobcat tho. We have a bad experience with Bobcat, motor issues, hydraulic issues, hydraulic cylinder issues. And the only issue we have had with the Deere is we broke a hydraulic line, (and a flat tire).

@logansmith6188 Ай бұрын

We have a dairy farm and do excavating as well. We have 9 skid steers, 5 bobcats, 2 Kubotas, a gehl and a 333g. We have run all the brand’s throughout the years other than caterpillar. Bobcat is the best their is but their service department sucks. Deere has the best service hands down. Not just my opinion, lots of die hard bobcat guys will admit their dealers are poor. They are great at selling them but fail on servicing.

@RockhillfarmYT Ай бұрын

Thanks for sharing

@OldIronAcres Ай бұрын

Change the oil at 750 hours.... I've had my tractor for 5 years and I think I just crossed 400 hours! LOL

@eBikeDad Ай бұрын

I was never more turned off by bobcat than at the equip expo a few years ago. Watched two frat bro type reps try to humiliate someone for asking what they thought were dumb questions.

@gckshea Ай бұрын

It's always interesting to go to shows, whether it's boats, cars , equipment, electronics, pharmaceuticals...the sales faces, the ones who face the public, are almost always hired pretty faces running through a script for which they know NOTHING about. And we consumers, who know stuff, can see through this in 0.1 seconds. You'd think the mfgrs. would catch a clue...college prep boys and tight skirts do not work long-term.

@SteveinMississippi Ай бұрын

That's a problem with a lot of equipment companies. They hire little dimwit pretty boys straight out of college with marketing degrees who don't know jack shit about real work with equipment. All they've ever done in most cases is drive one around the lot of their dealership/yard for a few minutes, and moved the various functions a little bit.

@twoguncorcoran4733 13 күн бұрын

A SVL97 is not 84” wide. It’s 80” so it fits ok on a contractor special trailer. Anymore it’s all about dealer support, all machinery has issues so it’s just best to pick who would take care of you. I like Deere ok but visibility is terrible on them. It’s like sitting in a bathtub, little view of anything below the lift arms. Bobcat is superior for visibility vs Deere.. the new -3 Kubota has a sealed cab and revised door. Even with a few drawbacks, the roll up door makes more sense.

@oldsailor8593 29 күн бұрын

Who would”d have guessed he is wearing a bobcat tshirt. Thought you said knowledgeable

@RockhillfarmYT 29 күн бұрын

I talked to this guy off camera for an hour hour and a half. He’s knowledgeable about all parts of the market and the attachments and different brands. He is a salesman for them and it’s his responsibility to represent his brand in a positive light, but I also felt like he was being fair

@AdamSmith-uv6kr Ай бұрын

Bobcats biggest fall back is service and that is why we left them. Parts are higher at the counter than most competitors, service is slow and sub industry, we had more downtime than running time because of service techs under warranty. So it’s more than just the machine itself.

@HamiltonvilleFarm Ай бұрын

I love my Bobcat, but the only thing I don't care for is the door that is hinged open like a car door. I'd rather have a door that slides over the top. If I need to get out, I have to make sure the loader is down past the door. I heard him mention pull over doors and vents, I'm not sure that's enough of a selling point to make the argument the hinged door is better

@RockhillfarmYT Ай бұрын

I’ve been saying for a while I wish I got a machine with a rollup door, but I like to hear other opinions For people who run these machines for a living, the top three sellers are caterpillar, John Deere, and bobcat All three use the swing outdoor and they could easily switch to a overhead. I’ve asked all three why they use the swing they all say it’s better long-term. Is Seals out dust better, it’s quieter, and they don’t want their guys to be able to jump out with the load in the air

@timb2825 Ай бұрын

I take my door off when the weather is not unbearable. It made the machine that much better and easier to use if you are in and out frequently. I also questioned the issues he mentioned about swing doors, but I have not used a machine with a swing door. I will say the door seal on my Bobcat is very good.

@tman8939 Ай бұрын

love to have a skid steer, just way to expensive from all brands.

@darkrevenger04 Ай бұрын

Bobcat mini's and ctls are built in ND

@RCPropaganda Ай бұрын

roll up door is nice but it is loud and a pain in the butt. get labors and your just fine.

@dans4900 Ай бұрын

Where can you get the best service? That's what we do

@classic89deerefever80 Ай бұрын

I'm deere to the core,but we run a s76 bobcat.

@user-hz4gw6no9w Ай бұрын

Only thing I didn't like about the bobcat was lift and tilt on the bucket with foot pedals hard to control in the more delicate places

@toddcaskey9984 Ай бұрын

Number 36. I'm doing terrible maybe it's the clips eclipse just got a lot going on I'm driving to my daughters for the eclipse party. We're right in the path of it was trying to water before there's no more water.

@RockhillfarmYT Ай бұрын

Number 36 in the Comments but number one in our hearts

@mkosmo Ай бұрын

Not that he's wrong, but I'm not surprised a Bobcat salesman would tell you how they're better than a JD.

@BigTader Ай бұрын

What engine does Bobcat use? I've really enjoyed these videos Brock your channel is awesome keep up the great work.

@RockhillfarmYT Ай бұрын

I don’t know, but I will ask. I’ve been texting with this Salesman from the video.

@RockhillfarmYT Ай бұрын

The bobcat representative just told me that the engine is made by Dusan and it’s manufactured in Bismarck North Dakota. The skid steer is built in the USA in one of their three plants. Not assembled, but fully produced

@BigTader Ай бұрын

@@RockhillfarmYT I might be wrong but I believe that Dusan is a part of KIOTI tractors. Thanks for answering my question. May God bless you and your family and business.

@RockhillfarmYT Ай бұрын

@BigTader no, they are similar sounding names, but Doosan owns bobcat Daedong owns kioti

@BigTader Ай бұрын

@@RockhillfarmYT Thanks for the info Brock 👍

@notsure6182 Ай бұрын

the most important thing that will determine if I buy another bobcat, are you still going ahead with the 'subscription' model for 'features' or have they come to their senses? a monthly fee for high flow or 2 speed is a dumb idea that will have me buy a Kubota

@georgea6403 Ай бұрын

Wow man. If only I was driving a King Ranch would I be able to afford one😢. The dumbing down features would be great for me😅. Damn. If I only didn’t get divorced I’d have one. Naaaa. I’ll stay divorced and keep my old tractor. Great machine and video. Thanks!

@TF856 Ай бұрын

I think that takeuchi is the best skid steer/mini track loader!!!

@RockhillfarmYT Ай бұрын

I’ve heard a lot of good things about them, but only ran one once at a show

@Trucker4281 Күн бұрын

What bobcat was in this video?

@andrewwood7217 28 күн бұрын

Nice unit But remember theses models weren’t available when you bought your Deere so you are not comparing apples to apples

@tobinwatts3336 21 күн бұрын

Kubota %100 better door design with the model 3. A person can get out anytime. Not only when the forks are all the way down or up. Which is great when working by yourself

@grantbrittain2774 Ай бұрын

Been a union operator for 30+ years.. ran lots of different skidsteers in my time.. most of them if you get them on much of a slope will run the tracks of their selves.. but a deere and cat will hang on a slope all day long with no issues.. I personally would keep the deere over the bobcat

@Hunt0qt Ай бұрын

Bobcat is known for their weak hydraulic pumps. I will tell you as a matter of fact that you put that 325G up against this T66 and it will outperform it in every single task you put them up to. I genuinely recommend you get a demo on this machine and test it in the same tasks as your deere. there is no comparison between time and efficiency.

@rontopping2048 Ай бұрын

T66 will run circles around 325g . 7mph in low speed, lift and tilt twice as fast. 325 g. 5 mph in low speed. . Deere has loudest cab in the business. Visibility is terrible

@ryanomalley3724 Ай бұрын

horrible visibility

@TopTopTopD Ай бұрын

You should do a review on the Kubota 75-3.

@fxnytroxtxFPP 19 күн бұрын

Swing doors are stupid, it's a deal breaker for a lot of people in construction fields as you cannot exit a machine if the arm isn't perfectly down. Once you try overhead doors ull never wanna go to swing doors

@jeremiahmcclure6782 Ай бұрын

What is that door

@FarmerMai Ай бұрын

I have both the Deere and bobcat for windrowing and leveling , I feel like the bobcat is a little underpowered compared to the deere but maybe I got a janky bobcat skid steer 😂

@zaccheus Ай бұрын

This salesman is very well acquainted with this machine and I really appreciate that. However, he did sell us on a couple of things that are not true. For auxiliary circuit flow, he told us that this 105 hp machine can produce 44 gpm at 4200 psi. The hydraulic horsepower equation quickly shows that pressure and flow to equal 108 horsepower which is obviously impossible. Even if the hydraulics were 100% efficient (which they are not), dedicating 105 hp to the auxiliary circuit would mean that the machine would have 0 hp available for any other function while running the circuit at full capacity. The matter of higher case pressure improving the speed at which direction of flow between functions changes is not at all helpful in a situation where you're asking a machine to smoothly divide flow between two functions. Also case pressure is often developed by internal leakage which a parasitic loss that wastes hydraulic power by converting it into heat. We don't want that. This machine does have some really nice features. I do appreciate the idea of running remotely at a pretty low cost. I'd like to try that, but I'm thinking that it's probably more of a safety hazard more than a practical function. Keeping the operator in the cab keeps him from getting run over or tangled in an auger just like keeping two hands on a chainsaw keeps your hands out of the chain. Again, I do very much appreciate this fella's knowledge and dedication to his job here. It's difficult to find people who are passionate ate about what they do. Top tier salesman.

@daleolson3506 Ай бұрын

Does he mean assembly in USA ,like putting the stickers on a machine made in Korea?

@rontopping2048 Ай бұрын

Engine is built in Korea, rest of machine built in USA. North Dakota. All engineering takes place in us and UK.

@stevecraig3004 Ай бұрын

Dayum...! I think you guys just sold another 100,000 Bobcat machines!

@platinumjeweler Ай бұрын

You're right Brock, everyone knows someone that's disgruntled. A huge youtuber mechanic had Bobcat and got tired if fixing it which was always expensive to do. He switched to IHI, just saying.

@toddcaskey9984 Ай бұрын

That's what I want you to get a forest machine

@kennethanderson1685 Ай бұрын

❤❤❤❤

@rikkilee9409 Ай бұрын

if bobcat decides to make their own tractor the first years of kioti are likely to have less parts and tech support for the kioti machines once the true bobcat tractors come out

@jackofall2305 Ай бұрын

I'm sure the parts remain the same just the assembly of said machine is being handled by bobcat. There isn't a generational change to the tractors they have and retooling would be insanely expensive for no reason

@johnbayliss1098 9 күн бұрын

I would really like to know what dealership this guy that you have as a spokesman works at I would like to talk to him about a purchase of a machine thank you

@RockhillfarmYT 9 күн бұрын

His name is Dale and he works at the bobcat dealership in Oklahoma City. If you call and talk to them, please tell them you saw this video. They have a dealer network in several states as listed in this message below that I’ve been posting on all of my Bobcat videos Bobcat is offering special rebate to viewers of my channel. Here are the rebate amounts and the participating dealerships: $500 rebate on any lawn mower $1,000 rebate on 1 and 2 series tractors $2,000 rebate on 4 and 5 series tractors Store Locations: Midwest Bobcat of Oklahoma City, OK Bobcat of Goldsby, OK Bobcat of Albuquerque, NM Bobcat of El Paso, TX Mountain West Intermountain Bobcat of Salt Lake City, UT Intermountain Bobcat of Orem, UT Intermountain Bobcat of Ogden, UT High Desert Bobcat of Nampa, ID High Desert Bobcat of Idaho Falls, ID High Desert Bobcat of Twin Falls, ID High Desert Bobcat of Burley, ID Bay Area Bobcat Bobcat of the Bay Fremont, CA Bobcat of the Bay Contra Costa, CA Bobcat of the Bay Santa Rosa, CA Bobcat of the Bay Gilroy, CA

@SteveinMississippi Ай бұрын

It's probably poorly designed hydraulics that's causing that. The pump or pumps that drive the skid steer should be separate from the pump that runs the work functions (lift, tilt, etc.). Even if they don't have separate pumps, the same can still be accomplished in a system properly configured with a flow divider or priority flow valve, which will give you a certain amount of dedicated flow to the drive regardless of whether you're using the other work functions or not.

@JT-qf4it Ай бұрын

Kubota SVL75-3 model now does that.