Happy new year fella, all the best for 2021 👍

Enjoy the Rangey, thanks for another great vid and happy New year to you.

I have the same vehicle with 155K miles on it. Once the air suspension lights start coming on (usually around 70K miles due to the compressor or desiccate powder clogging the lines and interfering with solenoids), just swap to coil springs and you'll have a fairly reliable machine.

I like your left side hammer swing 😂 Well done mate enjoy the content keep it coming

That wheel bearing could of gave you mares, but looked straight forward enough 👌, nice car to work on, looking forward to the next video, happy new year 👍😀

Not enough tea drank during that time lapse bit!! Thanks for sharing :)

Got to love a range rover have a good one tonight mate.🍻🍻🍻 All the best for 2021

love your indoor plant life Gretta will love you guys lol

Good old Duck Oil. Haven’t heard that referred to since I was in the trade.🙂🙂

Good work!! More uploads please😁

Excellent video mate 👍 i love that feeling when you know you have a bearing to do and you realise its a complete bolt on unit 🕺🕺. Happy new year to yous all 🥳

happy new year bud 👍👍👍

keep standard wheels and wheel bearing last for ever and to all the R/R/ haters just look after them which most folk do not and they will last as long as any car but you will live in comfort be safe in snow be able to pull what you want and as always feel a million dollars when driving !! What more do you want for around the 4K mark which is what I paid for mine 4 years ago with I hasten to add not problems since purchase happy new year to all

Omg you use the same slide hammer i have. My dad gave it to me as he used it in his lorry he had when he changed his wheel bearings.

Air chisel works well getting that type of bearing removed. As for the handbrake, cutting a hole in the spare wheel carrier works well for removal! Lol.

wicked channel. Wicked mechanic.

you will need to replace that drop link, it will be damaged with being loose, cheap and easy to change out

after spending your life savings on r. discs,shoes,cables,pads,hold-down kit + actuator , - dont forget to correctly set up the electronics the right way as they like having a bonfire on the motorway on a regular basis - recovered a few myself. [fixed a few as well -one to cross off the "fiddle job list" id say]

Nice to see someone holding a hammer correctly for most of the persuasion needed to remove the bearing hub unit.

Always them turbos in the back of your mind with the tdv8s, 2k job unless u do it yourself! N turbos are still 1k! I got rid of mine because of this 🙈

Just bought a 2012 Rang Rover Sport. So far...good suv. Everything brakes..🤔🤔

Like the fezzy mk3 in back ground track car? One bucket seat & rear cross brace

oh dear welcome to the joys of Land Rover I bought a 10p td5 lasted 6mths before oil sprocket spun and has been sat on trailer 4mths now as runs rough as hell and ignoring till warm to figure it out lol

Hi mate love watching your chant where did u get the Range Rover ?

I worked at one of the largest dealer auctions in the united states. You wouldn't believe what these sell for wholesale.

land rovers are easy to fix or replace, you'll be glad you bought it...just make sure your oil pump is the newer stronger pump, and the air compressor is easy to remove and fix also.

I noticed that you didn’t use a puller to get the hub off , any particular reason ? Nice video .

The handbrakes are a common fault because 99% of the time the person setting the drum up doesn't do it right or the arm on the shoe seizes up the issue with the arm is common on all ford drum shoes. If go on Google and search bodseys brake bible and follow that you will never have a issue again if you service the drums every year. If the epb squeels you might get lucky and dismantle both drums and used a diagnostic tool to unlatch/unjam the epb system whilst two people are pulling on the epb cable with pliers to pull the cable back out.

I did the first one in the Northeast just after it was launched because the main dealership were afraid to do it 🤔 and I did it on the deck

I've got a 1969 Jaguar, took me 5 minutes to change the front wheel bearing, there's progress for you!

ATB fella have a gooden

Happy new year mate. Also what’s that mk3 fezzy all about? Lol.

happy new year everyone stay safe

savnav is great on them touch screen best cheap suv mate

Try doing the back one

That's weird, my brothers workshop has gone ivy growing through the roof aswell do you know him?

Just a heads up, if the hand brake is screaming when applied (like that goat meme) then its possible it only needs adjustment. I thought mine had gone and looked at purchasing a sprocket kit but found on a forum that it may only be adjustment and it was 👍

P.S. just love the ivy through the roof just like my place It makes you feel at home and at one with nature Well thats what me land lord tells me ?????????????

What have you done

Not a dreaded Range Rover..... will be in the ramp every week 🤣😂👌

Good luck with handbrake

That park brake motor fails because the handbrake shoes have probably never been adjusted properly mate and the motor overwinds to compensate and shits itself... make sure you adjust them thru the brake disc after you fix the motor.... sometimes and adjustment will fix it provided the motor hadn’t gone too far ... best check the internal shoes for thickness 👍and there is a bed in procedure for them mate that you can activate via the car as it allows you to pull it on while driving and bring car to a stop 6 times if memory serves me 👍hope this helps mate

I love high end vehicle's with all the luxury. Power . But i dont think I could do repairs or afford the bills so i wouldnt stick to my ?

How much would it cost to have the wheel bearing and hub replaced?

I have a 13 evogue. 3 rear bearings in 1 week and its still not fixed.. Any suggestions on what is making it go bad within 100 miles each time???

you know you cab buy ear muffs that supress sound right?

Are you selling it at all?

Did I miss how much he paid for it ?

Where is your based mate

Can somebody tell me what wheels they are please

Just like the e39 bmw wheel baring

Mine failed with hub bearing then realised the large hex nut keeping the brake drum on was missing.

How much was it

Is that weed in the roof 🤫

Tdv8? Aren’t the sports v6?

"I think i'll do it the right way and use the slide hammer"... 3 seconds later *whacking it with a mallet*

Who’s is the grey rs

ha i just did an impulse buy of 40k a sport autobiography, cars great but has a strange 'clunk' whenever it has lock on and you hit a speed hump etc.....Garage cant tell me what it is and the company I bought it from are ignoreing me lol

All talk no action

Can’t be bothered every mechanics favourite saying

Dont you have a hub puller then

A range rover???? I hope you know a good mechanic....😂

buy another two for spares might last you a week, they are one vehicle i will not touch

SEE THEY ARE EASY TO WORK ON SO WHATS THE PROBLEM FOLKS ?????????????

Imagine walking into the garage and seeing someone swinging a lump at your 70k motor 😂😂😂

I bought a Range Rover sport 3.6 v8 about 3 months ago , it is the most unreliable vehicle I have ever owned , I have had to replace 1 injector , then it started to get high on temperature so had to do the head gaskets which was very expensive because of the two heads , then it needed heater plugs , then the alltinator had to be replaced , at this stage I have come to the conclusion it has to go

Get rid.......quick ! Money pits,.,...............

You needed a run around you say why buy a range rover you will only be running around for parts for it

Woman's car get a p38 4.6😂

LAND ROVER Have been making mechanics out of drivers since 1948 ......and STILL doing so ! Buy a Toyota land Cruiser As the Aussies say If you're going to the outback take a land Rover .....if you want to come back TAKE A LAND CRUISER

Wheel bearing replacement is nothing.

You appear to be a very good tech but purchasing a Land Rover by anyone in the trade really does make me question their sanity

Shame you didn't show how to change the wheel bearing. As per the title.

Would not touch that thing, even if it was for free. Just get a decent Japanese car like a Toyota or Mazda

Don’t buy old junk

Go out back in Australia come home in a toyota

Never buy a land rover, worst vhiecles on the road even the new so called defender, (and I have owned 2 discos and 1 defender 110)what a waist of money, only buy toyota