Thank you for not only explaining what each tool does but also demonstrating each in a practical application

So fun watching Jay open his goodies!

I wish I was your neighbor so I could share your tools.

Lol. Christmas in March. It always makes me smile to see a "kid" play with his new "toys". Can't wait to see what you make with these. ❤

You tossing the boxes is sending me. 😂

We haven’t even opened the boxes yet and I already love the video. The vignette at the beginning 😂

Great demo and unboxing (with flinging)! Love the doll hammer, too!!!

I've bought the drill guide a couple of months ago (long before seeing this video) and even if it's OK for the price, it has a bit of play at the bearing level. Not that much but enough so that you need to train a bit and account for it. Same for the guide bushings. Depending on the drill weight and balance, you'll need to keep the base well pressed against the surface, because it's so small than the whole contraption tends to be unstable. BTW, it can be seen in the video that the guy is using clamps to hold the base firmly. This is usually not the way to use such accessory since it is suppose to help when drilling holes in the middle of large boards (otherwise, a drill press is largely preferable). The extension rods and plate that come with the tool can be handy here to extend the overall base surface, as long as you place them on the ride side to compensate for the imbalance caused by the drill itself. I've ended up building a larger base plate on top of which the original one is screwed, a bit like what is often done for palm routers, and this makes the accessory far easier to use. All in all, it worth the money and it will help you guide your drill straight and perpendicular, but some preliminary testing is preferable before drilling the real holes. More generally, I've bought a couple of Veiko products on Banggood site and I must admit that the quality is very good for the price. The ENJOYWOOD 450 mm miter guide for table saw is a good bargain too. Very good quality (its weight is quite impressive) albeit at a quite reasonable price.

The brass hammer IS too cute to use!!!😊

How lovely for you Jay! New playthings which look fabulous. You can have even more fun and we get to watch. Thank you Banggod👏👏👏👏❤

Except for the hammer I never knew these tools existed!! Lol

I enjoyed watching you demonstrate how the tools work. They seem to be of good quality and reasonably priced. Thanks for sharing. Looking forward to your next video.😊

Such a well done video. Showing how each tool worked, even showing how it compared to your old tools. Great job, Karol 😅

Glad you love your new tools. Time for a new project to show them off to us properly! I'm busy saving up for new bits myself so it's good to see some in use . Can't wait for the next job you do !

This video is going to force me to buy a new table saw. Yeah thanks a lot. 😅 I'm impressed with that drill guide. I bought one years ago that was so sloppy it was basically unuseable. It jammed on the guides and the bearings had about 5mm play measured at the tip of a drill bit. It ended up in the recycling bin.

Great new toys. I totally want the cute hammer. The tools will help you in your 10000 years of sanding

This was so fun. It’s neat to see you so gleeful about that cute brass hammer. I want one!

Love the little 'tada' moment when you toss the empties. The bird mouth wood pusher/finger saver is a best buy.

It was so much fun watching you opening these boxes. A boy opening presents. The tossing of the packaging was cute. Loved the precision of the miter saw. There are so many toys. I am looking forward to watching you incorporate your new tools. More tools to find a home in your work space.

I love the little hammer. It's not only gorgeous but the interchangeable heads are genius! It also looks like the fatter handle would be arthritis-friendly. Got to love that. I'd buy it!❤ Also I love that you are opening the boxes and giving your first impressions on camera. Let us not gloss over the fact that you said if your first impression was that it sucks then you would simply say it sucks😅

I’m glad the tools are of good quality and are safe. It is very cool seeing you demo them. Thanks for sharing! Peace and love..Suz What ☮️💛

Very informative Jay and appreciate you showing how the tool is used. Watching you open each box with such anticipation is how I feel when I open my boxes of tools for the world of quilting.

The miter guide is amazing too, the quality is evident in all the pieces, to say nothing about the designs for convenience of it all. On to the next one ❤

The hammer is made in cooperation with Johnathon Katz-Moses youtube channel.

Wow! I think you just about hit the jackpot of tools ⚒️ 🧰⚒️. You know my only problem for me to use any of these tools. I need a work bench, table saw and router n a few more would be nice. Seriously Jay, I’m happy that you have all these tools (toys). They all look like they’ll do a great job. The best part you’ll be bringing lots more of your designs n restoring to us viewers. Have fun trying them all out. ♥️♥️😊👍👍👍🌟

Loved watching you meet your new toys. That little hammer is adorable!

Well, that was fun, Jay! Will we be seeing you using any of them soon? We will be watching for them now! You can't miss the red details on them for sure! Hope they help make your life easier, more precisionaly accurate, and more fun! 😻😃

Well look at you throwing boxes around all Willy nilly! Excellent episode & im so happy you like that hammer. It IS really cute! 🥹

Ooooo Love the mallet! So far so good 😊

That little hammer is stinking cute!! Great video!! it was fun watching your expressions and excitement!! enjoy your new tools!! Cheers :)

That is a beautiful hammer!

You Have Such MARVELOUS Toys!

Thank you for sharing all your tools with us; we can understand better the work you do! Yay, good video!

I love watching your channel. You're such a talented wood worker. Every single one of your projects have been so beautifully done.

Love the surprises in the boxes for you. Watching your face is as good as the boxes. Joyful

Very cool new tools/adult toys lol! I enjoyed seeing you use them as I'm not a wood worker. I just enjoy seeing furniture restored. I was quite shocked when you admitted you could not read Chinese 😂😂! You are so smart in other things I thought for sure you could read Chinese. Hope you know I'm teasing you. I always enjoy your videos.

Thanks!

It’s always good to have the tools to make any job much easier & go faster.

Cool products! Now I have to ask…will we see a video of kitties playing in the boxes?😊

I have had a cute little brass hammer for a very long time and they NEVER get old. I still think how cute it is when I use it.

I am happy for you.

I live vicariously through you, Jay. This was like Christmas!

Thanks for this. I learned a lot. I got a drill guide for Christmas and it is great especially when you don’t have a drill press. Cheers.

I had to send this to my boys 😊 We have 6 😊 I loved everything although I don't need them all, I'm with you on the mallet ❤ I'm putting it on my list for sure. Thanks for sharing this video

Wow, perfect timing, as usual, I’m looking to replace all the drawer fronts in my kitchen. That mortise tool looks like it will be just the ticket! Thanks for the candid info.

Wood be interesting to see an update after you've used them for a while. I think it's very important to know how the tool performs in a long run and how it resists wear and tear

You looked like a kid on Christmas morning, opening all those boxes! This was a fun video to watch! 😊

I have a lot of tools from Banggood there’s a lot of quality like enjoywood that’s a great brand

The miter Jig Is awesome. It is now on my wish list.

I loved how excited you were. I can’t wait to see what you make with them . Now back to work 😂

I first bought something woodworking through Banggood maybe 5 years ago. It was a square and it was brilliant. Very accurate and good value. I’ve since bought quite a few items through Banggood and it’s my experience that most are very good. I think there are a few things to mention: - Banggood is like the shop that sells tools. The shop itself doesn’t own the brands and there are likely to be items of varying quality at varying price points. Therefore, look for the brand names and don’t assume Banggood = great or = terrible - my measuring tools are all Veiko brand and are excellent. There may well be other brands available on/through Banggood but I am not aware of them

What a cute and beautiful hammer! I was surprised✨🤩🎉 Looks like the small weapon is ready…also, tools come with grip supports It's really nice that the tools come with support. The power of small arms merchants😸💫

That’s a Katz-Moses hammer. That’s why it’s so nice.

Love your new toys!!!!!

Thank you for showing us your new tools and demonstrating how they work.

Woohoo! Christmas for Karol/Jay (What is your first name anyway.?) ! I'm a gadget person as well, and I totally loved this video🤩 I am, however, not a woodworker, but even so I was impressed with the quality. (That hammer is a cutie! Is the head solid brass?) I visited their website, and they are certainly diverse, but nothing outstanding like the products you reviewed. Still, nice to know there is good quality there; in the past things out of China could be really cheaply/poorly made. I look forward to seeing you use these products on refinishing projects!

I am a female and a barber by trade but this was very cool to learn about these tools. And I’ve never seen someone throw a box as funny as you 😂😂 so cute 😘🇺🇸

These look so fun. I love tools and toys. I wish I had a huge shop.

Like this kind of video, as long as you still do your other type too!

New to your Channel, and a Bristol resident, I would have loved your old guide, just setting myself up with an MFT after a move to somewhere I can now get sawdust on my jeans again. Keep the videos coming

Could you BE any cuter opening your new gadgets? ❤️ Can't wait to see your new projects!

Love the tossing boxes off to the right. Such authority 😂

Not sure if anyone said this in the comments but that hammer is the Katz-Moses Hammer. He had it produced by Hongdui or however you pronounce the name. He also has a really nice router plane they made as well which you might have. I've not made it all the way through the video yet.

Thanks for demonstrating these for us! Now it’s time to go shopping!

Of the few Banggood tools I have bought, I have been impressed with the company. Only thing is that there are a lot of things that do not have any instructions for how to use or what parts are for.

That chisel hammer is great

A man and his tools! True love!❤️ ❤❤ Great video!

I can watch you reviewing tools all day long ❤ seriously!

Your eyes, when you saw that hammer thingy at the beginning. I don't have a clue about tools, but you made it simple by showing what they do. Gonna show all my male friends this video. But the gleam in your eyes made watching worthwhile. So cute! :)

Hey, you like brass? No way 😆 Glad you’re having fun!

You may need a bigger shop in the near future. 😊

That was fun watching you open all the new tools. I did notice when you cut wood pieces on your table saw, that you pushed it through on the piece you were cutting off…this left opportunity for the item between the blade and the fence to “kick back” - just thinking of your safety. 😬

Good video, the true test will be to see how they hold up to constant use. Will they be robust enough?

My fav is the cute little hammer😊

Excellent information on a great product. Many thanks!

Good shopping ✌️👍🥇

You got some cool stuff ❤

I have to commend the wisdom of their marketing. They don’t have to pay for advertising because they just get in touch with the popular KZfaq woodworkers and offer them free tools to open, try, and review on their channels.

Thanks for sharing!

Thank you ❤ you always make my day with a good laugh. Beautiful stuff 🧓🏻🌵👍🏼👏🏼

Well done. Thank you.

I’ve been tempted to buy from banggood but resisted , are there any import duties to be paid for shipping to the uk?

Wow! Do you do tours to see your workshop? I’m not even a woodworker but I’m thinking of buying those gorgeous tools. 😊

2 days later the miter gauge with fence is $24 more. Still a good price...but interesting coincidence that you post the video and the price went up. Other youtube woodworkers are reviewing this stuff right now as well and I have to think that this is a marketing strategy

Oooo, new tools!

I'm watching another channel and thinking wow, Jay's new tools would come in so handy here. One a guy was scraping the finish of a little bitty apron from a table about the same size as you were locking in place with your new clamps. Another, a lady was hammering wooden dowels into the old screw holes of the pulls of a dresser, and i was thinking wow it'd be so much easier if she had the cutest little hammer ever. 😂

I have a few of their tools an I have to say that it's exactly how you describe it. Surprisingly good quality for the price and they work very well, as long as you acknowledge that they are DIY-grade tools. If you are a professional and use them daily, you're probably going to find faults. But if you're a DIYer who needs a tool for one specific thing you need to do on this one project, this is an outstanding option.

Don't say cheap, say inexpensive 😊

Thank you for sharing this ❤

You look like a kid in a toy shop with all your new toys. And after filming he hugged the little brass hammer and took it every where with him 🤣.

I have to agree, that is the cutest wee hammer I’ve ever seen 😂😂❤

Great work dude 👏👏

Thank you for very informative and entertaining video. Are you in the UK ? If so, what import taxes did you have to pay on the mitre gauge/fence? I’m keen to buy it but don’t know the tax liability. Any info would be very helpful. Look forward to hearing from you please. John Ryan

3/22/24..2day Banggood Tools. A+ presentation/review/explanation of all tools. All items look great! Thx Jay!💪👍✅️

I enjoyed your video so I gave it a Thumbs Up

Boys and their Banger toys 😂 You looked like a kid in a sweet shop opening those boxes with an excited chuck of the boxes 😂 I don't need stuff like that BUT I could possibly be persuaded with that oh so cute little brass hammer 🥰

This guy gets more freakin handsome every time he's on camera!!! All joking aside the tools look really cool. The last one makes me a bit weary but, working with power tools isn't for the faint of heart LOL!!! Hoping all is well Bud, Dirty Jersey out!!!

Flipping Drawers & Flinging Boxes Merch idea: Picture or drawing of The little mallet w/ the phrase: The cutest little hammer I've ever seen. IYKYK 📦💨

Great video….

What a special man. 😊