I loved doing this video, If you have anything questions on this please direct them to @sharticlefizzix on Twitter as they gave me all the tips on these one use demo items and have offered to answer any questions. Maybe in the future we will print off our own gadgets in food safe plastic, bamboo etc... it's certainly a really fun thing to try out. If you like this concept i'll hopefully get some more. ****** Full info & credits for the individual 3D printed items here barrylewis.net/recipe/3d-printed-kitchen-gadgets/ More kitchen gadget testing on this playlist kzfaq.info/get/bejne/pdJ2jMmZ2bnHgmg.html ******

I think that once a year, you should do a "I'm still using it" gadget list, because even though these are fun, it would be really helpful to see what you actually found worth holding on to.

The toast tongs should have been used on the length of the bread, so you don’t have to stick the tongs inside the toaster sides to grab it.

"i hope you are well, yes YOU" *me looking at laptop wiping eye* "I am now" i love your videos heh.

Just to reiterate: Not all plastics are inherently food safe and can leach out bad stuff, especially into wet foods. Also, 3D printed items unless sanded and sealed properly are full of crevices and crannies for bacteria to hide and breed. Of course, not all plastics are safe for the dishwasher either. Make sure to read up on food safety before using any random 3D printed items.

lol the 1st one you broke (that was for toast) - it is for jinger-ly grabbing the WIDE sides of the toast not the thin top/bottoms

Thoroughly recommend the Prusa Printers video on printing food safe items, it has more info about the right materials and the best ways to stay safe.

Spin the 2 water bottles and make a tornado. Had something similar in science in school.

The toast extractor looks like it grabs the "edge" or crust on the bread to pull it out of the toaster

Food colouring and glitter in the bottle timer one kids would love that

Cookie cutters and stampers work better when you flour them up first. 👌🏻

3D printers will be very soon in every house..they are as cheap as normal printers nowadays..the filament isnt expensive..easy to use..tousands of uses. Supports for DIY shelves, decor, missing parts like the back of a tv remote or a button...endless posibillitys. Proud owner of a modded Ender 3 Pro..love it.

Barry: "I've got a knife!" Crocodile Dundee: " That's not a knife"" pulls out a machete

I would use the elephant for the washing up sponge etc..

Can you put together gadgets gone wrong video, would be funny I reckon 🤣👍💯

I wouldn't trust those pigeons, Barry. They look like they're planning some form of terrible vengeance upon you.

I love your gadget testing videos - ive watched every single one!! But could you do a “testing sustainable kitchen tools/gadgets” please 😇😇😇

"Smallest whisk in the World" *Babish has entered the chat*

Yeah, 3D printing is pretty cool! I studied medical genetics at university and it's possible nowadays to do 'bioprinting', which is using the same technique to 'print' tissue. (obviously in addition to things like growth factors and stuff to get it to imitate living tissue). It's used a lot for testing drugs etc at the moment which is pretty cool. So maybe one day organs can be 'printed' for transplants!

You actually are a teacher. How to and hot to not do things. You are one of the food channels I watch because I can actually learn stuff about cooking. That's why I love this channel.

‘We will all have one in our home in 15 years’ I’m finally ahead of a trend! By 15 years too

\Thats not how you use the toast extractor. hahah, you dont squeeze it you just slide it.

My dad bought a 3D printer I think over a year ago to print parts and models to make my parent's flat 'smart'. He loves it and it is in constant use.

Hello, Barry and fam (and doggos)! You're the highlight of my day when I have a min to catch your vids. Keep being awesome!

At work we urgently needed a mount for a GoPro, but it would have taken a week to arrive, so we found one on thingiverse, 3d printed it and had it within a few hours. Magic.

the problem wit 3d printing everything that is a lot of plastic being used only once because once your done doing something you cant melt it down and reuse it.

Oh i have that same elephant drainer, tho i use it for the sponges on the back of the sink! works well to keep them up on their ends and the water drains out and lets them dry :D

I love that bottle opener. 😍

For the toast grabber, wouldn’t you grab the piece lengthwise considering it was so large?

Last time i was this early, Barry and Stuart hadn't tasted Surströmming yet. :D You know, if you ever do some sort of tribute to the past video, you could call it "Barry to the future" :D

For egg-separation there is another great invention called "hands"! They actually pre-dates the 3d-printer. :)

This was stonkin’!!!!!! Please do more like this!

An aspect of 3d printed stuff is that you can resize/reshape within the limits of the printer, this lets you make stuff for people with special needs or even just for kids.

My gosh you and your family make my day!❤️ always so glad to see you all🙏 thank you so much 😊 For all your hard work that you make look like such fun 😂❤️🙏🤗

What defines a year isn't what's to come, but what we've experienced last year. The status quo is never the same. Love your videos, btw.

Three dimensional but also vertical as well? What a revolution!

It’s gonna blow your mind when you realise you can just stand the beers up?

I took a class in college on how to 3D print and I’ve made a car, and a pitbull. I took a picture of my dog sitting and designed it from that. It was so hard at first but so cool. The one we had in class was like a 10,000$ printer. We could really make anything. But you can get them cheaper. I’m saving to get one bc it was so much fun.

will you make a Barry Lewis oven gloves?

These days, I think you can print off more flexible plastic that won't snap off so easy.

Also when I was in school, we used to tape 2 bottles together and then you shake it a certain way while liquid is pouring down to get a 'tornado in a bottle' with the liquid draining in. That is what I thought of the timer with the bottle

The best thing I've seen - one of the first guys to develop this technology said he realized how useful this could be when he moved into a new apartment and realized he didn't have any of those plastic rings for hanging his shower curtain. Instead of having to run out to the hardware store, he just printed a couple of rings to tide him over.

Salsa in a squeeze bottle? That's ingenious!!!

The toast extractor isn’t designed for pinching the toast it grips it on the crust

My husband is very techy (is that a word?) and has had a 3D printer for a couple years now (Christmas gift from me) and his best creation so far is making a Star Wars themed chess set - that one came out so detailed and amazing! He’s gotten pretty crafty with it, amazing what you can print! Def recommend you investing in one...I do recommend getting the filament already on spools-it’s a pita to wind on yourself!

That was an interesting video also it was very nice of that person to send you all those goodies. Thanks for the giggles.

Isn't there some talk already about possible technology to be able to 3D print human organs in the near-ish future?

When he said I’m a teacher I was just like so are all the other parents up in the world right now 😂😂😂😂

You can use that water timer with 2L bottles, give the top one a good swirl and you get a water tornado! Had one when I was younger, super fun!

I would love to see a follow-up video. I used to work at a 3D printing company and watching that technology develop was amazing.

Totally agree on eggs Barry always keep them in the fridge for firmer yolks

For me, the best gadget is the egg separator. One thing I hate is the watery part of the white that makes a mess in the water when I poach eggs direct! Using your separator as just a strainer gets rid of the watery part, and the egg/s can cook easily without the ‘soup’! Nice one, guys!

I definitely got a 3d printer, ender 6 and ender 5 plus :D I think everyone should have one o.o They're so useful!

Did anyone else die a little inside when barry thought that toast extractor grabbed the toast by pinching rather than along its length -_-

I love the videos, truly do but you massively overestimate how many people want random barry lewis things. I do share your vision for the future, it's going to be a thing of beauty.

Some of these are so cute. But I think with the elephant drainer I would use it to drizzle chocolate over some ice cream or such, all it needs us a little tip to keep the chocolate in till ready. Just my thoughts when Barry asked if we had figured it out.

Full size houses have been 3d printed. Small 3d printers can be bought for a few hundred pounds. Use a knife with a rounded tip to leverage the lid under one of the lugs that grip underneath the glass rim until it pops. Put sand in the timer and see how long it takes to run through. That cutlery drainer looks like a white elephant to me. 😜

That water hourglass connector thing minus the internal section could be super-useful to connect two bottles when you need to use one as a funnel. We mix forest berries with sugar and store them in bottles. Regular funnels always get stuck with berries, so we just cellotape two bottles together and it gets super-messy.

Would LOVE to see a part 2 of this!!

How sad it is that I cried from your lovely opening comments. Having not seen another human, in the flesh, for weeks, really felt like u were talking to me 😪😪

Barry... When you said "Inner Circle"... Like Bayaya, I thought you was going to say Alalalalalom

nice thing is you can melt down the failed ones and ones you no longer need to use to print new ones

We have a 3d printer and it's scary howoften we say "oh could we fix this by printing that?"

Hope ur family are staying well in crazy times i haven't been out for 3 months now as im just 2 scared to but watching yuo and your marathons keep healthy plz stay safe stay healthy

I've had 3D printer for a few years and use it a lot. I've made a custom cutlery drawer insert (my drawers are a funny size), Dalek beer holder, various food processor blade holders, jubbly holders, can stackers & other stuff. Wouldn't use it for things that come into contact with food (like a chopping board). Love my 3D printer.

Seeing how brittle these are I think they were printed in PLA, a plant based filament. It works great for figures and such but not with parts that have withstand a lot of force. The ones that broke would probably be more durable in ABS or PETG, which are oil based filaments.

When most people get on roll they keep going , when Barry is on roll he makes sandwiches 🥪

With that coupler if you shake the bottle and then turn it over you can get a tornado or a water spout anyway it's cool you should try it

There is a really good Netflix documentary about 3D printers and open/shared source called Print the Legend. Highly recommend.

Barry, back in the late 80s early 90s they actually used to sell something similar to the 3d printed coupler you showed in toy stores as a "science toy". I think it was called a tornado in a bottle. What you would do is connect two bottles the same way you did, but as you flipped it you would give the bottles a little "spin" to start the water moving in a circular direction around the upper bottle. The motion would cause the water to drain in a whirlpool through the hole in the middle of the coupler

3.39 - That's user error - You kept going until it broke. The vacuum seal had already been lifted, but you just kept applying force.

HAPPY BIRTHDAY CHLOE!

I made your cook along Easter biscuits live with a 3D printed rabbit cookie cutter because I didn't have time to order one! Worked pretty darn well! 😊

Nice! 2 of my hobbies in 1 video. Wish the prints where better quality tho, but happy that some worked.

I couldn't wait 15 years so I bought a 3D printer last year use it all the time. There are flexible filaments as there are stronger Filaments such as Nylon or Acrylic. The plastic is heated to 200 deg C + to melt it so it will be sterile as it prints. The same may not be true for the bed of your printer (especially if you print in your garage like I do)

The timer gadget could also be used to get the last bit of condiment or liquid soap out of a nearly empty container into a new one. This way you get the most out of your purchase and less waste. You have to leave it attached overnight to get all of the product/solution out (via gravity). I have a version of this I got via mail order about 50 years ago involving a small funnel attached to two spring clamps. Eventually the springs or plastic will break, but for now they still work.

I'm glad you put the disclaimer on food safety!

Yay coors light! I’m from Colorado so I love when I see that!

Thanks for the video. I dont know much about 3D printers.

Rip, to all that plastic, doesn't really help the world but I guess it's for Barry Lewis Content 😂

It's nice to see your videos in my notifications again 😁😁😁😍😍😍

Oh my god i forgot i was subscribed to you cause im on my old ipad and i have literally just been watching all your videos

We'll all a 3D printing device in our homes one day...sorry to disappoint Barry, but I haven't even got a paper printer, never mind a 3D printer 😂 great video though as always!👍

I hope in the future we use less cheap single use plastic not print it ourselfs

What hurts worst is he put a picture of how its actually supposed to be used right next to him breaking the toast extractor and its just barry, barry it hurts lol like obviously i assume he knows now but it still hurts so much lol

As soon as 3d printing became a thing (about 12 years ago?) I immediately imagined a day when we'd be able to just go to a little built-in printer in our home, whenever we needed something like a replacement Tupperware lid or spatula, or whatever...pull up a pattern from a database, and order one. In my mind, it's going to be the first step towards all of us having replicators, like in Star Trek.

The water timer, you could put glitter in with the water & do the science class water tornado 🌪 thingy

Barry is just adorable

I was in an engineering class, and we had end of year-projects, and one of the students in my teacher's other class period made a 3D printer that used a hot glue gun as the printer head and instead of actual glue sticks, he made basically simple syrup candy sticks, and he could print very pretty candy constructs. Though after a while, the glue gun head got too hot and the candy started to burn. But it was just a prototype. And I know 3D printed chocolate is a thing.

An engineer i worked with 3D printed a biscuit cutter for the guy that cleaned the office who was famous for his biscuits. U know the cutter, its the one that has the donut hole twist in section so it doubles to cut out donuts. Eh, it worked but mostly it looked neat....you really need that thin metal edge that just crimps and cuts the biscuits. I predicted the dough would be a bear to get out of the little 3D printed lines in the cutter and it was. It wasnt horrible but also felt it was just hard to get really clean. My engineer had build his own 3D printer using Makerbot plans....he even made wooden gears to get it started until he could print plastic gears and use those...the device was a reverse cannibal, printing out its own working bits, how cool is that!

Only 12 years to go im excited

The egg device already exists. You are supposed to lift it off the edge and give it a wiggle. It is done in seconds.

With how exspensive 3d printers are and how little i know i would use one, never going to be in my house. I mean great concept, but if im making things i prefer metal work. I doubt i would trust a metal 3d printer.... imagine the issues with molten metal 😂

That failed citrus juicer could still be used, just by sitting it over a small jug. It might be a little unstable, because it wouldn't have anything to secure it like the properly printed one, but theoretically usable, I think.

Love these videos

you should printed on petg or abs filament, and pay attention on orientation what gives best strength

Metal vs Plastic! ... Metal Wins!

I have a 3d printer and I will totally be printing some of these thank you so much for this

What did we learn today? If we are ever expected to rely on 3-D printers for our consumer products, we are going to need stronger materials.

How many times Barry? Flour your utensils!