yeah, it's very comprehensive :)

And Rk's twincharge mod

@@sargeantcammy8330 I also have that one installed haha. It’s cool that you can make the turbos overheat with it too.

@@stevenlee1075 that’s a nice detail

@@stevenlee1075 i mostly rk's for the indestructible engine, and the OP radiator. not a huge fan of how rk's turbos work

wow that's a lot of info XD

Unfortunately, the car is not that good. The rear wing, for example, is completely illegal. The rear wing could not exceed the side of the cabin. There was an attempt by Zakspeed in 1980 to circumvent this by adding parts to the rear fenders that attach up to the rear wing (The Zakspeed "Super Capri") but it was protested by Kremer and declared illegal. EDIT: The car is also around 30 kilogrammes underweight for being a 7,3 litre turbocharged car. The dry weight of the car is around 1335 kilogrammes while the required minimum dry weight for 7,3 litre turbocharged cars in Group 5 was 1365 kilogrammes. Due to the Moonhawk not having a Turbocharger in any of it's stock configurations, adding a turbocharger would also not be permitted by Group 5 regulations. In response to your post, IMSA GTO was NOT a sibling Group 5. IMSA GTO used a completely different ruleset and only looked similar, not to forget that IMSA GTO was a thing before Group 5 GT rules were even a thing. A closer ruleset was IMSA GTX, which you mentioned, which Group 5 cars were permitted to drive in. It should be obvious that the Chevrolet Monza was not a Group 5 car as it raced in IMSA GTO before Group 5 existed. I don't know why you think a Mini raced in Group 5. There was never a Mini build for Group 5 regulations. You may be confusing it for Australian Group 5 touring car regulations of the 1960s, which have ZERO in common with FIA Group 5 GT regulations.

never saw it... I'm not a viewer of mute content, though I do respect him

yeah, I was thinking this car was a little more slap dash than that :P

haha that's absurd, and completely unrealistic XD

@@fillman86 yup

oh man! silhouette is always the best categories!!!

haha I've improved it a bit since the video, but it's still a bit of a mess XD

the capri is from ford, which is an american car, but I believe it was designed and made in Europe

yeah, automation really doesn't have the audience it once had :/ so I'm keeping it to the weekend live events, and the occasional episode :)

Yea that intro cracked me up XD. These are lowkey BAD in functionality. you absolutely cannot drive competitively with most of his mods and they're usually just thrown together for a single video. This car has some potential though, if his files aren't read only, I'm going to tune on it for myself. Kinda sucks because I'm sure fans would love videos of him polishing a mod off VS clearing the table and making something else. So, it's not shocking what other creators can do comparatively.

haha well that's what this video is about :P

haha there's like a hundred wheels, so I just went with the first ones that fit the bill :P

Better and better

thanks :) but I feel this one is less crazy than the triple engine tractor XD

interesting idea :)

you know what, it'll be live on the repository if you want to give it a try :)

go for it. I'll probably do Group B with a standard car too, so keep an eye out for that in the coming weeks if you want to see more stuff on how to do it :)

Thanks :) But I still have my university exams coming up so yeah.

I'm glad you like the jankery XD

I'm glad more people are getting eyes on my videos :) though recently I've moved away from making my videos so tutorial like, because they were too heavy in technical info. If you want that kind of stuff, you'll have to go back a ways, or look for my tutorial specific video from a few months ago

@@fillman86 Thank you!!! I thank you but, if I know the generalities of the programs to use, I will start looking for tutorial information on the internet. I don't like to take up time, and I know it takes a lot because I also make Mods. You must concentrate on the content of the videos, which is your goal! I tell you: I think that modified Group 5 type cars can have a tail!! And honestly, I hope that's the case so you can continue enjoying it!!! When I was young, my first real car was a Fiat 600, the “Autobello” of the BNG! And everything I learned about mechanics, competition preparation, bodywork and paint and so on, I applied to it. I left it as a kind of “Fiat 600 Group 5”, or a wider and turbo-powered Abarth!!! AHAHA!!! I can't show you photos on KZfaq. I would love to see/do that in BNG!!!! See you, and thanks again!

schadenfreude

haha it certainly is a car of all time

@@fillman86 definitely sir!

the cjd thing? yeah, I'd never heard anyone talk about it before

thanks mate :)

god I love this car. As an aside I did fix the axle jiggle for the most part too :)

I've done more in-depth videos in the past. All I do is take the original, and rename it in a few spots, and then it's a whole new part that you can select in game :)

Awww shucks

lol they'd need to tune the hell out of this car first!!

haha I try :)

yeah, it's just aggressive axle hop that I can't seem to solve on my own :/

@@fillman86 its seems to be just a moonhawk thing, because ive made a fully built vanilla moonhawk and yet the axle hop is beyonddddd extreme

The Moonhawk has probably the second worst Jbeam of all vanilla cars behind the T-Series, it has many issues and it could be one of them. The oil starvation too.

@@canadianbluepants9446 oh, I never noticed before...

@@agenty_gd yeah, the t-series is nothing like the other cars, so it's tricky to work on :/

thanks :)

I've learned ctrl_f2 :) so no need

funny you should mention the pessima ;) I might be doing some stuff with it in the near future I recon :)

haha it wasn't easy :P and I'm not able to make it perfect

He used turbos

yeah, twin bolide turbos. What you may be referring to is the transmission whine

@@fillman86 the sound when driving faster and transmission is working

it'll probably be approved by monday :/

@@fillman86 look forward to it

closer to 9, but those have been on-off years. The real reboot started in 2020

not just tyres, but to also have a wider car (there's a reason race cars aren't narrow)

group 5 was a silhouette series, C was a prototype series, so they aren't really that similar at all. Also the bolide was made during the time period, they just probably don't know much about racing history, or they're referring to some obscure race series that no one knows about

@@fillman86 it was merely speculation.

I'm thinking I might do more of these :)

@@fillman86 💪

I'd never heard of it, so I just assumed it had a big update

Oh nice lol though I haven’t set any of the prices haga

I'd just never heard of it until recently, so I assumed the update from last month, added a load of stuff that wasn't there before... my bad

@@fillman86 no worries, just wanted to share that. I think it first showed up back in 2017. The fact it's even still around and still getting updates to work in newer versions of BeamNG is a miracle and is a must have mod. There are some other really awesome mods that add a lot like the KJLP Core mod along with the other associated mods requiring the KJLP Core Mod, AR16s D-Series Addon mod, and a few others. I would also like to add, that even if someone has added or created a mod similar to an idea you had, go ahead a make it anyways, many of us in the BeamNG community love mods that add more variety and have different twists to similar ideas.

yeah, it does kind of fit that thing too, but it's also very secluded to america only :/ so most of the world doesn't know much about it

thanks man :) it's fun to try to control, and feels good when you get a corner right

nice

haha it's a real tricky beast!

don't know it

@@fillman86 It does have a very steep learning curve, and I'm not sure how it would work on your windows workflow. But you could use vscode + vim plugin. Anyway if it catches your interest, here's a video that could introduce you: kzfaq.info/get/bejne/jpxxhZWDsqiZpHk.html Love your beamNG modding content 👌

it's in the your game files :)

@@fillman86 Oh right thanks ! I'm going to check it out more deeply then ^^

I've hurt my hand, so the review of my full impressions will come later :/ soz

@@fillman86 oh its fine lol kinda suprised the ABXY weren't also removable.. kinda dissapointing with how much you paid. also I've gotten over things feeling/looking like crap after using the reverb g2 VR headset honestly, the controller feel like crap, (due to the 4 triggers having 0 weight to them and the plastic just being overall creaky and bendy) are completely non-ergonomic due to the grips, making your hands hurt during long playing sessions... but MAN are they durable. I was lucky to get it on sale for 50% off and only got the headset for $300. anyway excited to see the full review!

it'd be so boring to use other people's mods

unfortunately there's not a wide selection of tyres. They're also slicks, and don't look like drag tyres to me

@@fillman86 15:44 are slicks supposed to have tyre treads or is that a mistake on the Devs' part?

@@fillman86 Oh hold on, I see where the change was made, I didn't notice beforehand and thought you never canged it, it's probably the shaky rear wheels sapping some power and maybe a quarter of the low end grip in the rear

@@solar_ignition oh, it was treads at first, but not much later I switched them over :)

@@fillman86 Maybe the tyres weren't as wide as they could've been? Or the bouncy wheels took most of the grip away under power?

haha they were switched to disks, but beam was still showing them as drums :/

I did notice afterwards that there was more tyre options, but the mod is live now, and you can go try it out with the wider tyres if you want :)

I'm oh so tempted!!! but it's just too old... I will be doing something with it at some point though :) I love that old thin

no idea who that was, are they british or something?

@@fillman86 Yes, Wilbur Soot is a british Minecraft KZfaqr

@SimulatorAdventures and I did that over on their channel with the car :)

@@fillman86 wait what do you mean who’s channel

@@Thatslipknotguy666 they are another small youtuber like me. I gave him early access and we did things like go around the daytona track :)

at what point are you failing?

chatgpt sucks with niche coding like this, I've tried

yeah, there's not great options tbh, but these slicks are within normal ranges :)

both were actually the same car with a different skin, and had turbo'd 4 cylinder engines, but they were very cool

I'm releasing multiple mods a week for videos, so I can afford to eat XD I don't have time to do such extensive extracurricular work :/ I'm also fine with people taking any mods that I've made, and rework them to make them better, and to re-release it :)

@@fillman86 right

as always, it's awaiting approval over on the beamng repository - www.beamng.com/resources/authors/fillman86.380331/ it's the weekend now, so it'll probably be available on monday

@@fillman86 oh alright, thanks for the reply.

not sure what you mean

​@@fillman86I think he means all the AgentY's misc mods

I guess the one with absurdly hard to set up universal powertrain swaps (if only vanilla cars had any standarization it would be less jank)

@@agenty_gd haha many of the vehicles were made before they started to standardise things, like the bus and truck :/

@@fillman86 The bus and truck are not standardized because they are scratch made while other cars commonly have lots of parts copied from each other (which leads to less accurate simulation so thankfully since the remasters they are changing that)

you can find it and most of my mods on my repository page www.beamng.com/resources/authors/fillman86.380331/

it's still awaiting approval, and is available here - www.beamng.com/resources/authors/fillman86.380331/

I'm sorry you feel that way. I'm using a cinematic camera as a webcam XD I've already added saturation and contrast, and it's hard to tell how far to push it before it looks bad whilst editing :/

yeah, unfortunately I don't have a lot of time to make a video. I think of it more as a way to give people ideas, and just to show the journey :)

@@fillman86 I apologize for my comment, came off a bit rude. Currently stretching out my fenders by a meter each side in solidarity

@@THESLlCK haha there is a lot of extra work i could have done :P but yeah, time constraints

the concept would be that you'd replace it with fibreglass etc :)

sorry you feel like that. I've added more contrast and saturation already though. It's really hard to tell how far to push it

haha well done :P

haha it was fun to make :P