IDE TO SATA HDD / SSD - PS2 SLIM INSTALL
Рет қаралды 14,003
Жыл бұрын⚠️ERRATUM⚠️
➡️AN OBVIOUS THING TO SAY, I AM NOT RESPONSIBLE IN ANY WAY FOR ANY MALFUNCTION OR ANYTHING WHEN YOU DO THIS INSTALLATION
➡️I HAVE MADE SOME MISTAKE IN THIS VIDEO SORRY FOR THAT
➡️SOME BIG HARD DISK DRIVE NEED MORE POWER, SO YOU NEED TO PLUG 5V TO USB POWER,
THE 5V REGULATOR I USE IN THIS VIDEO DOESN'T EMIT ENOUGH CURRENT.
⚠️ERRATUM 2⚠️
➡️WE ARE TALKING ABOUT 100PF CAPACITORS (AND NOT 100µF) .
In this video I show you how with the PS2 Flex IDE Resurrector you can install an IDE to SATA adapter.
Sorry for the brightness on the video, I'm using a new phone, and I haven't found the right settings yet
The IDE to SATA converter I used:
fr.aliexpress.com/item/325916...
The 100pf capacitors (SMD 1206 SMD ceramic) :
www.ebay.fr/itm/173049264834
The link for the Flex IDE Resurrector :
gusse.in/shop/ps2-modding-par...
You can find the 3D models on:
gusse.in/ps2-modchip-diagram-...
@Gusse Жыл бұрын
⚠ERRATUM⚠ SOME BIG HARD DISK DRIVE NEED MORE POWER, SO YOU NEED TO PLUG 5V TO USB POWER, THE 5V REGULATOR I USE IN THIS VIDEO DOESN'T EMIT ENOUGH CURRENT ⚠ERRATUM 2⚠ WE ARE TALKING ABOUT 100PF CAPACITORS (AND NOT 100µF)
@Sadistic46 14 күн бұрын
Are the caps required if you're using your flex cable with the SD card reader?
@Gusse 14 күн бұрын
@@Sadistic46 nope ;)
@haloslayer255 Жыл бұрын
Excellent work as always Gusse!
@Gusse Жыл бұрын
Thanks Robert !
@DeadlyVenomKing Жыл бұрын
Dam that lullaby music making me fall to sleep
@ReaverXIII Жыл бұрын
Arretez le, cet homme est fou. Dans 2 mois il va nous sortir une PS2 qui peut aller sur la lune.
@MrPedroteruel Жыл бұрын
gracias por el nuevo video gusse. he visto que los chicos de modsville usa ponen los capacitores de 100nf ,puede ser que sea porque es otro adaptador? lo probare.👍
@yoshsinzy Жыл бұрын
Wonderful! by the way What is the reason for supplying 5V power from the top of the motherboard?
@Gusse Жыл бұрын
I use the 5v on the top of the motherboard, because the one on the bottom has a protection circuit that blows a fuse if you ask too much current to the regulator using a hard drive 😉
@yoshsinzy Жыл бұрын
@@Gusse I understand very well! thank you!🤓
@marrizard 3 ай бұрын
I would like to know if its possible to fit a deshelled ssd inside the ps2 slim. i would also like to know if the ssd would require more power like the 2.5in HDD you were using. if not, would i not need to do all that extra soldering with the sata connector, or would i be able to plug the ssd in outright once i have the adapter connected to the resurrection cable? im very new to this, and am interested in trying this.
@marrizard 3 ай бұрын
no, seriously, can Gusse or anyone give me an answer?
@Gusse 3 ай бұрын
@@marrizard Hello ! yep I can give you an answer of course ;) just I have a lot of work and I do my best to try to answer to sollicitations ;) SSD need less power than HDD (there is no motor inside, so less energy and no big currents peak). You can check here some posts I have made on X last year : x.com/Gusse__/status/1694691375269167210 and here: x.com/Gusse__/status/1693648391807402133 and here withtout lid to have a better view : x.com/Gusse__/status/1683854788243468290 files and somes resources are available on my website gusse.in
@marrizard 3 ай бұрын
@@Gusse thank you so much for all this info. I will definitely look into all of this. You're the best!
@AngelArm1110 2 ай бұрын
Amazing looking product! Perfect for my purposes. But what is the reason for the CAPs between RESET, READ, WRITE, ACK, and their adjacent ground pins? I don't think I've ever seen anyone do that before.
@Gusse 2 ай бұрын
thank you. Without its capacitors, and with this kind of adapter, it simply doesn't work.
@AngelArm1110 2 ай бұрын
@@Gusse Yes I figured as much lol, I was just wondering if you knew why. Full disclosure I'm making a portable using this kind of HDD loading, and I'm trying to gather as much knowledge as I can. I actually tried this mod a several years ago, using the exact same SATA bridge device as well, just without the benefit of your flex cable. The system interfaced with the device, and I was able to load and play KH2 precisely once... And then it just stopped working. Mayhaps this was the reason? And had I known to put those CAPs in place, it might have worked more that just the once? I don't suppose that was what happened before you figured out to add the CAPs?
@Gusse 2 ай бұрын
@@AngelArm1110 I'm not the person who discovered that capacitors were needed in these places. I just know that it's the fruit of empirical testing for no apparent reason. Capacitors help stabilize signals for chips, which are of very average quality but readily available and very inexpensive. Other boards apart from Maxwell chips don't need these capacitors. Also looking at ide to SD boards, capacitors are present and this is potentially only a prerequisite of control chips, and for certain reasons. Also the original mod released a few years ago and which has become hard to find uses more capacitors on its circuit to certainly stabilize electronic fluctuations.
@rusdanfahrizalturzi3115 Жыл бұрын
dude when u use this way what u use in setting on opl when read the hardisc is USB Game Turn ON or HDD game Turn On on the opl setting
@Gusse Жыл бұрын
hello, you can activate both it's not a problem 😉
@NacherasTM 6 ай бұрын
Hi! Any differences between IDE resurrector v0.1, v0.2 and v0.3???
@Gusse 5 ай бұрын
minor improvements only, version 0.1 was just a prototype
@orcungungen6711 6 ай бұрын
Hey man I did an install with wires to a standard ide hdd and it gets detected in ulaunchelf but i cant format it or read games in opl what could be wrong, do i need to use caps for an ide hdd too?
@orcungungen6711 5 ай бұрын
Now it reports the wrong size
@Gusse 5 ай бұрын
caps are need for IDE to SATA mod, not needed for SD Card mod
@yoshsinzy Жыл бұрын
Is the correct value for the capacitor 100uF or 100pF?
@Gusse Жыл бұрын
ohh so sorry 🤦♂🤦♂ -> it's 100pF THANK YOU VERY MUCH !!!
@RETR0_P0CKET 10 ай бұрын
Glad I found this comment. I was using 100uf smd caps because I had them on hand. You say in the video it might have limited functionality without the caps. Should I me able to read and format the SSD without the caps in place?
@OverLord-OvLd 11 ай бұрын
Can I use a SSD with this Mod an at same time a Matrix Infinity or do I need the Modbo 5?
@Gusse 11 ай бұрын
Yes you can use SSD and with matrix without any trouble ! depend on the SSD some can’t t support direct boot via dev.2 option in matrix menu, but can launch from opl from usb or memory card and play games from it.
@OverLord-OvLd 11 ай бұрын
@@Gusse Many thanks, that sounds great! Is there any recommendation of SSD?
@Gusse 11 ай бұрын
@@OverLord-OvLd unfortunately I haven't test a lot of SSD so I have no specific recommandation... I have tested some Samsung, Crucial and old Corsair and they run withtout trouble but I can't guarantee anything
@OverLord-OvLd 11 ай бұрын
@@Gusse No problem, thank you!
@geangomes4192 8 ай бұрын
Hi, is there a way to do this on the PS2 Slim 75006?
@Gusse 5 ай бұрын
nope, Sony have remove components for iDE management after SPCH700xx revision. The only hope, it's a real ODE
@arda5974 Жыл бұрын
Bir başyapıt 🙏🏻
@ragenfio 11 ай бұрын
I wanted to buy one but unfortunately for me it's not good as I put the hard drive in place of the optical drive with the wired installation... Unless you bend it in extreme ways. But it's still a great flex cable nice job!
@Gusse 11 ай бұрын
you can teardown SSD drive, and remove plastic box, then you can close DVD hood
@ragenfio 11 ай бұрын
@@Gusse I mean that the shape of the flex cable is not suitable for installing a hard disk in place of the optical drive as I like to do with wires.
@Gusse 11 ай бұрын
@@ragenfio pbs.twimg.com/media/F15AlNhWYAAXJGd?format=jpg&name=4096x4096 check that ...
@ragenfio 11 ай бұрын
@@Gusse Yes I saw on your Twitter profile and I like your idea, but the way I install the hard disk the flex is not good. I want to clarify that it's not good only for me, I also made a paper mockup based on the photos and video to understand the shape and dimensions of the flex cable.
@Gusse 11 ай бұрын
@@ragenfio Interesting! if you have something to show, I'd love to see it ;) personally, I've done a lot of installation with wires, it's cool to do, but you need time... ;)
@mruniverse2015 Жыл бұрын
How much you charge If I sent you a PlayStation?
@Gusse Жыл бұрын
hello, contact me via my website to discuss about that ;) gusse.in
@holdenafart7372 4 ай бұрын
What rating on the capacitors
@Gusse 4 ай бұрын
100pf
@luanvdmerwe8257 Жыл бұрын
Do this mod work on the ps2 slim 90004 model aswell?
@Gusse Жыл бұрын
hi unfortunately no, Sony has removed the components on the revisions after SCPH700xx, you can use MX4SIO on 90004
@luanvdmerwe8257 Жыл бұрын
@@Gusse Thanks Gusse I appreciate your reply but I can use the MX4ISO with modbo 5.0 with the software if iam not mistaken. I know they said FMCB is also not compatible with the 90004 series aswell but that is why I rather ask you who know what works and what not.
@Gusse Жыл бұрын
@@luanvdmerwe8257 From my side I have done an SCPH90004 with integrated SD reader on memory card slot and use a modbo 5.0 You can also use OpenTuna to do that without modchip. I remember the SD compatibilty could be tricky, and don't forget to make DVD and CD fold at the root of your SD Card and activate BDM support in OPL ;)
@luanvdmerwe8257 Жыл бұрын
Thank you Gusse do you have a tutorial on how to do it?
@Gusse Жыл бұрын
@@luanvdmerwe8257 You can check out the video of this great guy kzfaq.info/get/bejne/fN9zdZBosMWddYk.html 😉
@Shmayzer 5 ай бұрын
Точно такой же переходник но у меня так и не получилось запустить SATA, хотя IDE HDD работает отлично. ХЗ чё там, так и не разобрался.
@Gusse 5 ай бұрын
did you have installed capacitors as shown in the video ?
@androxilogin Жыл бұрын
I've wanted to do this soo bad but I absolutely cannot justify spending $40 on a flex ribbon. That's just ridiculous. I'll wait on the clones.
@trueactionchannel Жыл бұрын
Yes it is expensive but i think the price is fair.
@androxilogin Жыл бұрын
@@trueactionchannel I can see if it came with the converter adapter and resistors, stripped down and soldered up, maybe $25. Printed models on top of that, maybe $40. But the ribbon itself at that price, no way. I wouldn't even consider it. $10 would be a stretch at reasonable for something such as that. An accomplishment, sure. Congratulations on that. But not a logical price for what essentially is an extension cord, in my opinion.
@Gusse Жыл бұрын
I totally understand, and I'm not going to justify myself here because I'm not forcing anyone to buy my flex. Wait for the clones, as I'm waiting for them... a cool German guy published his sources to make an installation like mine and I still don't see any clone... if you want to make your own you can use his models it's free: circuit-board.de/forum/index.php/Thread/33386-M2PS2-PCB-f%C3%BCr-PS2-Slim-SCPH-700XX-zum-Betrieb-einer-M-2-SATA-SSD/ If you watch the second screen of my video, I indicate that you can do it with wires, and it will cost you $0.5 or less 😉
@androxilogin Жыл бұрын
@@Gusse I've seen the wires install on your channel as well. Pretty intricate! Your wire management is unbeatable. I'm glad you took my criticism the right way. I'm sure you'll get (and have gotten) some sales at the price you're going for. I may still do a wires install just to say I did.
@satibel 4 ай бұрын
@@androxilogin given that the guy sells only a few I think it's a fair price for the time spent making it. (But yes it's hard to justify when you can get a fat with a network adapter for 10 bucks more) Though for now I'll just keep using the network, it's fast enough for most cases. If I get the motivation to install an hdd I'll probably make a knock off using 3d printing and wires.
@OnTheEdgex23 Жыл бұрын
Why not design your own pcb instead of doing all that work on Chinese junk adapters?
@Gusse Жыл бұрын
very good question, I thought about that, but designing and producing that, will be much more expensive than using components already present on the market, already the price of the flex I made is already relatively high, I doubt that many people buy an adapter equivalent to that one 😉
@OnTheEdgex23 Жыл бұрын
@@Gusse If you build it they will come. Flex cables are expensive to design to begin with. PCB's are generally cheaper. I think a compact flash adapter may be doable and allow over 128GB
@Gusse Жыл бұрын
@@OnTheEdgex23 yes I know, after I do this in addition to my main activity, and it's hard to find time for engineering this, if others want to start this adventure 😉 for now I stay with Chinese adapters, I will soon make a test with a compact flash adapter that I just received, apparently the limit of 128GB would be bypassed ☺
@Jek47 5 ай бұрын
@@Gusseany news on this? I’m considering buying your ressurector flex but the only thing putting me off is the 128gb limit
@Gusse 5 ай бұрын
@Stabz47 I always recommend the SATA mod to go beyond 128Gb at a reasonable cost. But you can make the mod with iFlash SATA to get around the 128Gb limit. You need to make a wire bridge to connect the iFlash with ide resurrector or make the mod directly without ide resurrector using the mapping diagrams on the net for wiring. Check out my posts on X (Twitter), including this one: x.com/Gusse__/status/1728388537626792347?s=20
TecnoBit_Videojuegos
Рет қаралды 43 М.
AISHU [QL]
Рет қаралды 189 М.