#iforwilliams

Рет қаралды 9,528

2 жыл бұрын

Пікірлер: 17

@paulrobinson3528 2 жыл бұрын

The plate was a great find, same size as what you needed to. Dont over look the tyres. They are supposed to be replaced at around 7 years. That trailer will give you many years of service. Well done.

@livingoffgridinscotland 2 жыл бұрын

I’ve got a new tyre to go on, but might just take them all off, shotblast the rims and fit all new tyres… I’ve had a few blow outs in the past always when I’m overloaded!

@paulrobinson3528 2 жыл бұрын

@@livingoffgridinscotland Trouble is with trailers, they sit around a lot and then when in use, usually they are load to the max. Tyres pressures are ignored and then pop. New tyres, since you have done so much to it already would be a good idea. Don't forget the spare lol

@livingoffgridinscotland 2 жыл бұрын

@@paulrobinson3528 the spare is brand new and lives in the boot of the Rangerover, I think I’ve got another brand new spare in the shed as I bought 2

@andy7169. Жыл бұрын

5 yrs

@colingordon4 2 жыл бұрын

Another useful video, thanks for sharing. Don’t forget to use your home made creosote on the bare wood where you fixed the load rings. Cracking job 👍

@livingoffgridinscotland 2 жыл бұрын

It’s had lashings of creosote… I’ve also sealed all the edges around the aluminum and deck rings to stop water getting down into the boards

@jamesstan4678 Ай бұрын

James from Canon City Colorado. U.S.A.

@johnelliott9415 2 жыл бұрын

Good job but would have been wise to pressure washer it be for re assembling it and even put som extra galvanised paint on at the moment I am looking for a Tilt Bed 16ft so if you know of one please respond Thanks

@roadwarrior8560 4 ай бұрын

Well done, subbed.

@livingoffgridinscotland 4 ай бұрын

Thanks for the sub!

@philboyes6840 8 ай бұрын

Hi. Great video, thanks for sharing. Did you get around to cleaning the galv panels on the trailer? We have two and really struggle keeping them clean. Any tips would be welcome.

@livingoffgridinscotland 8 ай бұрын

No sorry, never got them cleaned, I believe the only way of cleaning galv is a very light sandblasting….

@rayrooney1 2 жыл бұрын

Hey I’ve a quick question. My Ifor Williams trailer axels have a lot of surface rust, it’s a 3500kg trailer like yours. Are these axels made of solid steel or are they box section steel?

@livingoffgridinscotland 2 жыл бұрын

Box section in the middle, stub axles are solid bar I have seen them snap if heavily corroded