I got a quote for over $700 to replace the started and that motivated me to keep troubleshooting myself first. Thanks for the great video, I think this is my issue.

Auto repair video with no music in background. Fantastic. I hope you gather 1 million subscribers. Well done. Ty

Like many others here, this vid was extremely helpful in even diagnosing the buzzing sound. My mechanic had no clue. All fixed up now. THANK YOU 🙌🏼

You saved me some serious headache and moolah! I was able to do the install, at night, following along with your instructions. I hit one snag. When I installed the new switch i must have inadvertently turned the ignition cylinder as I wriggled and pushed the part into place. This completely froze the ignition cylinder to the point that the key would not turn (not even a bit) when everything was put back together. As a result I removed the part from the cylinder again and adjusted the small slot in the middle of the switch that the small metal part of the cylinder fits into. Kinda hard to explain. But anyway, when doing this repair the switch should slide into place without much pressure. If it doesn't, try rotating the switch a little bit clockwise until it does. 👍🏿

Thanks to your excellent tutorial, I had my starter switch changed out in about 30 minutes last evening. The hardest part was contorting myself between the seat and steering column and positioning the screwdrivers at EXACTLY right the angles to remove the clamshell screws. Now my CRV starts every time with no buzzes, and I today I stopped holding my breath every time I turn the key that it would fire off. I did vary just a bit and use a genuine Honda switch.

I just two days ago watched the videos on this and pulled my daughter's apart. Some worn burnt contacts. I gave them a good cleaning and new lube and reinstalled it. It works great now. I may change it later, but it was a pretty quick fix.

Nice video. Clear and to the point. I would also recommend disconnecting the negative battery cable when you're working on electronics like this.

Thank you so much! I couldn’t have done this repair myself without you!

Thanks! A perfect video! We had the same problem. Always disconnect the battery when working on electrical components.

I used your video to help me with this problem I had with my Element. I followed exactly what you did and it worked like a charm. I just want to thank you so much for your help! You saved me $150 or so.

Thanks so much, had same problem with my 2011 CRV- fixed quick thanks to you

Thank you so much for your video. I was really afraid and worried about how difficult and costly replacing the switch would be. I'm m going to give it a try!

Thank you! Straight forward video. You saved me a bundle.

Ty for your help by pointing out things on how to do this and keep up with the honda element repairs, its helpful to us Element lovers.

Thank you very much for this video! I had the same problem and I thought I would need to replace the starter. I bought the exact same piece you used and I was able to replace it myself (with 0 experience at all lol). Saved me some stress and a couple hundred bucks. Thank you!!

Absolutely brilliant….and a low-key presentation 💯

Great simple video!

Thanks! My son's 2011 CR-V has been acting up for a few months now. I thought it was the starter, (which is a real bear to replace) but his is doing the exact same thing as yours. I ordered a new part for $50. Will install tomorrow.

Thanks for the video. Was able to replace in my daughters CRV in under 20 min.

Thank you!! Your video fixed my problem. I had the exact same problem with the ignition switch buzzing so I ordered the part you recommended from Amazon. Hardest part was removing those small screws holding the component. I almost gave up. I thought that I had stripped them.

Exactly what I was looking for! Thank you!

Thanks for the video. On my father's 2016 there was one screw on the bottom and 2 up behind the steering wheel to get the column shell off. Had to turn wheel and do one at a time

Thank you brother. My CRV has the same issue, I am going to tackle this. Big help, thank you!

Its realy helpfull planning to change my starter but this is the real problem 👍👍👍👍🤙🤙🤙🤙

I have the same problem with my 2008 RDX. Going to do this ASAP

Thank you so much mate. Your video is extreamly helpfull. It saved me a lot of money and avoided all the bullsh... from mechanics like .... oh you need to replace starter motor, maybe replace the battery,.. etc...

Nice work as always 👏🏾 👌🏾

Thank you very much for the great video, it was very helpful!!

Thanks for the great video Dlrship wants over 1000 to replace I am so greatful for your video U inspired me to do it myself I will keep u posted God Bless

Thank you for this video, I used it to fix mine!

Thank you for clarifying how the piece changes. The way you explain in the video is excellent and you are from me like and subscribe

Very helpful video. Thank you!

Wow great vid. 👌 mechanic wanted to charge me 1000 dollars to do the whole thing new including cylinder key.😮 😅 this was the initial problem

This is great, thanks!

Thank you my friend good

The two small screws that hold the switch to the lock cylinder are phillips and the angle they are at is difficult to access and torque out. A small wratchet wrench with a phillips bit is your best bet .

Great video! Thx!

Great job...

I have a video of what mine sounds like. Also, I think it’s the same thing as yours, but I can’t figure out how to upload it on here so you can hear it. We already change that starter, as well as the relay switch to the ignition and it’s still doing it!

thanks dude, I have the same issue and will try your solution

Best video.. bless up

Thanks I know my problem now

Great video. I just subscribe to your channel. Thank you.

My friend you sound like Like you from guyana

Valeo amigo, tive que apelar pra um gringo me ensinar. Valeo mesmo. Muito obrigado

Thais to your excellent ⭐️⭐️⭐️⭐️⭐️👀

❤

👍

Good video. What CRV year is that?

Hey I wonder does this work for a 2004 honda accord, I mean is it located in the same spot?

So if you hear a buzz sound from the dash board when the key is turned the ignition switch is going out?

I have a 2002 crv doing the same thing , whats that part called?

did this with my 2005 odyssey and key wouldn’t turn. i tried the old ignition switch and still wouldn’t work. put the new one back in and accidentally locked the steering wheel. anyone know what to do

I switch mine out but now the key witch won’t turn

already replaced the ignition switch but still experience intermittent no start

You have recode key