Star Wars Rogue One Shore Trooper Helmet (3d printed)

Рет қаралды 2,212,226

Күн бұрын

I 3D printed a Shore Trooper helmet from Star Wars Rogue One!
Check out how I did it!
TOOLS LIST:
(some are better than the versions I own)
amzn.to/2akFubx - Orbital Sander
amzn.to/2ay8ICl - Dremel tool
amzn.to/2ay9XRX - CA Glue (medium)
amzn.to/2ay9T4v - CA Activator
amzn.to/2hrl6Wj - Air brush with compressor (mine is Harbor Freight)
amzn.to/2hnwja9 - Bondo glazing putty (good for small spots & seams)
amzn.to/2hmAtlz - Bondo body filler
amzn.to/2hnv4Yt - Bondo spreaders
amzn.to/2hrfrj0 - 3M Flexible sand paper (150 grit)
amzn.to/2hnBiaM - 3M Flexible sanding sponge (220 grit)
amzn.to/2hKh765 - Pin stripe masking tape (0.25")
amzn.to/2axPtbL - Silhouette Portrait (vinyl cutter)
www.matterhackers.com/store/p... - Ultimaker 2 Extended 3D printer
www.matterhackers.com/store/p... - Ultimaker 2 extrusion upgrade kit
www.matterhackers.com/?rcode=... - All filaments, 3d printing supplies from MatterHackers
amzn.to/2al6w2q - Heat Gun
amzn.to/2aovz06 - Respirator
amzn.to/2aW3nHn - Filters
amzn.to/2aY182W - Eye protection
Subscribe: bit.ly/ILikeToMakestuffSubscribe
Check out my TopVideos!: bit.ly/ILikeToMakeStuffTopVideos
Learn 3d modeling, get digital plans, and cool merch at
iliketomakestuff.com
Want to support ILTMS? Get exclusive content and more...
www.iliketomakestuff.com/patreon
FOLLOW:
/ iliketomakestuff
/ iliketomakestuff
/ iltms
#ILikeToMakeStuff
About I Like To Make Stuff:
We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!
These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about!
Star Wars Rogue One Shore Trooper Helmet (3d printed) // How-To | I Like To Make Stuff
• Star Wars Rogue One Sh...
I Like To Make Stuff
/ iliketomakestuff

Пікірлер: 2 500

@KicstarV 7 жыл бұрын

Finished my exams. had not seen any star wars yet!! Download all 7 episode to watch and get ready for rogue one. yeah!!!😉

@monophonoise4548 7 жыл бұрын

Kicstar V watch Rogue One first, and then watch the other episode. you will get it.

@MW3TIM 7 жыл бұрын

Kicstar V Enjoy it!

@femkevdw8369 7 жыл бұрын

Kicstar V you should watch it in the order: episode 1,2,3,rogue one, 4,5,6,7

@femkevdw8369 7 жыл бұрын

Event Horizon thats not the chronological order of the story though it should be 123 (origin or Darth Vader and everything), rogue one (they get the blue prints), 456 (rebellion after they get the blueprints), 7 (and 89 coming out later)

@femkevdw8369 7 жыл бұрын

Event Horizon I see where you get it from, but i always prefer the chronological order

@jimmydiresta 7 жыл бұрын

Wow !!

@davestrain1762 7 жыл бұрын

Wow Also! BTW Seen it... It's Awesome!

@Aubble 7 жыл бұрын

Hi diresta :D I love your vids

@beautifulbeaner 3 жыл бұрын

W OMEGALUL W

@nerd_world8919 7 жыл бұрын

this is actually really good and one of my favorite things that i've seen 3d printed

@taxavoider9889 7 жыл бұрын

If I owned something like that I'd never take it off

@lovebirdmic 5 жыл бұрын

I end up getting the helmet all smelly due to bad breath -.- So, I think IF I make something it'll be a rebel helmet. Like on endor. So it wont cover my face and such.

@proseiben3358 5 жыл бұрын

lovebird mic Brush your teeth, are you a caveman?

@samuelmayr9796 4 жыл бұрын

Trust me, you will hahaha

@Daidalos69 4 жыл бұрын

This is the way

@ziospoletta7482 4 жыл бұрын

this is the way!

@JayBates 7 жыл бұрын

Favorite project that you ever made: confirmed.

@Iliketomakestuff 7 жыл бұрын

@Artismia 7 жыл бұрын

Absolutely wonderful!!! The project, process, video, and your enthusiasm, all inspiring and a pleasure to watch!

@Sullendust 7 жыл бұрын

The assembly of the 3d printed parts is so satisfying to watch. Awesome job!

@caitlinV3 7 жыл бұрын

Holy smokes! That's amazing. Your work is inspring.

@ilovenarwhalies 7 жыл бұрын

This video and your helmet are the best things ever. I have a 3D printer that I have not been using to its full potential and you inspire me to be a better maker!

@Iliketomakestuff 7 жыл бұрын

That's awesome to hear, thank you!!

@imperialrecker7111 6 жыл бұрын

boi wat u doing in ur life 3d printer is a thing that i always wanted in my life.

@mdbohica 7 жыл бұрын

Bob...That's badass. Amazing work!! Great job!!

@Iliketomakestuff 7 жыл бұрын

Thanks Josh!

@ian9outof10 7 жыл бұрын

What a great video. I love stuff like this, and this video was the absolute perfect balance of how it was done and showing how it was done. Epic stuff.

@that1guy839 7 жыл бұрын

That is a beautiful helmet, and when you put it on the voice changes and that makes it even cooler! I would love to have one of those! Keep up the good work 👍

@TheBenjaman 7 жыл бұрын

if I just had a 3d printer.....

@Lellba47 7 жыл бұрын

you can still do helmets out of foam! There's a very good explanation on these on Tested :D

@TheBenjaman 7 жыл бұрын

Lellba47 yeah I know, i've seen some amazinf foam helmets and stuff

@jabbahammahummus2887 7 жыл бұрын

If youre looking for a cheap printer, try the anet a8 from GearBest. it's 150 bucks and ships worldwide.

@Videogametourist 7 жыл бұрын

Look into the Anet A8, cheap printer that brings surprising results.

@jasenwills590 7 жыл бұрын

That's surely not big enough to make a helmet of this size though right

@69virgin1966 7 жыл бұрын

Bob that helmet looks great! I especially like how you gave it a used/distressed look. I think if you were to make all of the rest body armor, I would love to see the video/s. Thanks for sharing

@AgustinSevilla 7 жыл бұрын

What an amazing job! Impressive work man!

@RyanTerry 7 жыл бұрын

I think I had a smile on my face the entire time I watched this. Fantastic job, Bob!

@Iliketomakestuff 7 жыл бұрын

Thanks man :)

@verdatum 7 жыл бұрын

Fellow propmaker here, this is one of the best projects I've seen you do yet. You're really tempting me to finally get around to upping my CAD skills. I'm seeing a lot of advantages of doing a print over molding and casting a sculpt; especially for one-off props.

@AnimeWars2002 7 жыл бұрын

And of course you could stop at an earlier point and mold and cast if you didn't want to go through printing and cleaning it up. Also give you chance to use a superior material.

@lil_vault_boy4201 7 жыл бұрын

verdatum If your a prop maker...... I'd like a Samus helmet master chief helmet soldier 76 gloves jacket and face mask Boba and mango fett helmet along with a pilot helmet from Titan fall.Whats the total cost?

@verdatum 7 жыл бұрын

I LOVE YOU Personally, I don't do sewing projects like the Soldier jacket; I'd outsource that. I have no idea who "Mango fett" is, so I'm leaving that out. Depending on the design, there's a very good chance you'll be blind while wearing the Titanfall helmet. Presuming you want Hollywood-film quality dead-on realism, I'd give a ballpark estimate of about $30k, not including licensing issues, of course.

@lil_vault_boy4201 7 жыл бұрын

verdatum Lmao I put "mangofett" .Nah but it was a joke.But if I wear to try and get these I wouldn't go for dead on realism.Going for dead on realism would be too pricey and unneeded.Instead a simple version of it with out the colors would be fine enough as any body can get tape and spray paint the object.I find it kind of funny that you took this as a order.Although I do like the fact that you were very professional in terms of responding to my comment.

@michaelkerr9682 4 жыл бұрын

Nice! You should do the "Mandolarion Helmut as well.

@RowdyBrian17 4 жыл бұрын

That's some damn good spelling right there

@yeboy6020 4 жыл бұрын

i agree

@General4nubis 4 жыл бұрын

@@RowdyBrian17 username checks out

@crappiegamer2341 4 жыл бұрын

There is a build in KZfaq that’s really good

@yeboy6020 4 жыл бұрын

@@crappiegamer2341 what is it of?

@johanderuiter9842 6 жыл бұрын

Good stuff.. Awesome how you go through each step in making this work of art. Rogue One is the best SW movie yet!

@HaraldDeathwolf 5 жыл бұрын

This is awesome Bob!!! I love star wars and think that your love for making stuff and star wars is fantastic! This is one of the best helmets I’ve seen! And great job on the painting

@hievenhade7545 7 жыл бұрын

I´m very interested to do this in my free time when I am older... I just dream of a Death Trooper costume in a quality like this xD

@notreal8699 4 жыл бұрын

i will remind you...

@wiyao8164 4 жыл бұрын

There your older now

@Nakamax. 4 жыл бұрын

You also might like a Captain Rex's Storm trooper armor set. Captain Rex was an original and is very good with blasters, mini guns, etc. He was also one of Jedi Anakin's Trainers before he switched sides and became darthvader and then get absolutely obliterated.

@corywildasin5705 7 жыл бұрын

This is awesome man. I just found your channel and I love it! Keep it up man!

@nolaehan922 6 жыл бұрын

It looks REALLY clean!

@acledfloyd 6 жыл бұрын

This is a reminder that you wanted to make the whole armor. I'd love to see you make it.

@NitrousDiecast 7 жыл бұрын

I'm not a big Star Wars fan, but this looks really good!

@abnormaalz 7 жыл бұрын

Hotwheels Dd same lol

@Shrew-22O1 7 жыл бұрын

Hotwheels Dd same..

@zwartepjotr2865 7 жыл бұрын

pleas make the armor it would be so cool

@femkevdw8369 7 жыл бұрын

zwartepeter69 that would take ages

@EctoGamer 7 жыл бұрын

zwartepeter69 it would take 2 years with 1 printer

@thesecretworkshoppropscust7215 7 жыл бұрын

Hey bob. Love watching your videos and have me the inspiration to finally set up my own workshop! Currently have this shoretrooper printed just for the sanding and filling!

@unhandydaddy5117 7 жыл бұрын

Damn the empire needs to hire you! that looked super cool!

@arcticfoam5480 7 жыл бұрын

Rogue one was by far one of the best movies I had ever seen, and I love the helmet, maybe you should try other Star Wars helmets? Like Captain Rexs' helmet, or a shadow trooper hemet

@fatbrian9458 7 жыл бұрын

Yes! Armour would be fantastic!

@waldvogelreview7755 6 жыл бұрын

Rogue One was an amazing star wars addition Great Job !

@robredfeather8731 5 жыл бұрын

Nice job!!! I just got a 3d printer and am going over different SW helmets to figure out which one I want to make first. Nice process and it looks awesome.

@jamesbarrett1614 7 жыл бұрын

This is great!! I'd love to see you do more of these. Maybe the Death Trooper or Boba Fett!

@Iliketomakestuff 7 жыл бұрын

I probably will at some point, as long as I can make sure that the videos offer some new info for people to learn. Thanks!

@vasili1207 7 жыл бұрын

Pro tip if you want correct colours ... 99% use ww2 German RlM colours of the Luftwaffe and panzer divisions , all the empires colours are based on this , since rouge one is empire cannot go wrong

@lmcriminals 5 жыл бұрын

The official color is Sahara Beige

@ThePowerchimp 4 жыл бұрын

The dark edging gives it a Borderlands vibe! Great work.

@AtomkeySinclair 6 жыл бұрын

Excellent build - watched to the end. Thanks for sharing. Looked great after weathering...

@PeterOConnl 7 жыл бұрын

Sweeet video, super cool. So close to 1M subs. Great work Bob.

@DaedalusProps 7 жыл бұрын

Rogue One spoiler: PEWPEWPEWPEW BOOM! POW *robot noises*

@Iliketomakestuff 7 жыл бұрын

Awww man.. you gave away the ending!!!! ;)

@DaedalusProps 7 жыл бұрын

I Like To Make Stuff i'm a bastard like that LOL By the way, love the channel. I saw the life casting videos that you did with Bill, he's pretty great LOL

@HelloKitty-sd9vs 5 жыл бұрын

@I Like To Make Stuff lol 😂 I never saw it cuz I don’t like StarWars hehe

@floopusdoopus Жыл бұрын

I’ve been assembling a Scout Trooper helmet for the past few months and I’ve learned so much on what NOT to do. This really helped to learn

@domonator5000 5 жыл бұрын

I loved the this trooper's helmet model way more than any others before

@craftedworkshop 7 жыл бұрын

Dude, that turned out AMAZING. Gonna wear it to the theater?

@Iliketomakestuff 7 жыл бұрын

Thanks man! I just might ;)

@craftedworkshop 7 жыл бұрын

I Like To Make Stuff you better! Seriously man, that is some incredible work. I really need to dig into learning Fusion.

@aarontena 7 жыл бұрын

The question is: Can you aim with it?

@boonkiousgangulous8221 7 жыл бұрын

of course not are you mad

@aarontena 7 жыл бұрын

Oh I thought you could. That would have broken the laws of the universe.

@blueawesomedinosaur 5 жыл бұрын

I don't think it would be good sights for a weapon.

@edwinng4610 5 жыл бұрын

@Kaiser7068 2 жыл бұрын

Well… shore troopers in rogue one had a pretty good aim

@kevingreenfield8285 5 жыл бұрын

That scarif trooper helmet looks really cool and I wished I can things like that, so cool.

@dimplybucket 7 жыл бұрын

The imperfections are what make it perfect!

@YoureASquidYoureAKid 7 жыл бұрын

Bob this might sound weird but you should drop it or scratch it a little bit. To give it that extra touch!

@brooks1052 7 жыл бұрын

lol that does sound weird but thats a good idea

@JordanCataldo65 7 жыл бұрын

unsure of how the 3d printed material holds up, but i did the exact thing to weather my fiberglassed Boba Fett helmet. smacked it against some concrete block, rubbed charcoal all over it. Turned out real nice. The best way to get that "real weathered" look is to paint a silver and black as the base layer so when you chip off your actual top color, it has that very minute depth to it that makes it more realistic up close. I tried putting the silver and black on over top my top color and it looked exactly like i did that hahah

@SenorEscaso 7 жыл бұрын

Great job, Bob! I'll be going to see the movie this Sunday!

@femkevdw8369 7 жыл бұрын

SenorMateo I saw it yesterday and it was amazing (it really cleared up some stuff that was unclear in the original triology from the 70s)

@blabswell3308 7 жыл бұрын

i liked the way it explained the 2 meter wide exhaust port XD, now it all makes sense.

@MrJWalton2009 7 жыл бұрын

kudos to you! Great video and wow I'm blown away at the quality, definite passion project. Thanks for sharing it!

@WhundersAlternate 7 жыл бұрын

I remember when I stumbled upon this channel when it had somewhere around 300k subs a few months back, now he has over a million! Good job!

@MakeSomething 7 жыл бұрын

Dude! That's crazy awesome!

@Iliketomakestuff 7 жыл бұрын

Thanks man!

@AndrewSetters 7 жыл бұрын

Absolutely awesome.

@Iliketomakestuff 7 жыл бұрын

Thanks dude :)

@thomaswright968 6 жыл бұрын

Super impressed mate! Well done 👍🏻

@chandlerwilliams4415 6 жыл бұрын

Hardwork pays off, looks great!

@JHA854 7 жыл бұрын

Leave it in the desert for a few weeks to weather it even more haha

@rakdos91 7 жыл бұрын

practical effects taken to the next level

@torbenfickerich9745 6 жыл бұрын

dude that haha in you sentence is super poor

@chelsieelder7473 6 жыл бұрын

f**k. u

@panther2906 5 жыл бұрын

Chelsie Elder fuck you too

@benjamincole4716 7 жыл бұрын

Spoiler alert: that one guy does that one thing

@sspoon 7 жыл бұрын

NOOO THE ENTIRE FILM'S RUINED NOW!!! HOW COULD YOU?

@AbeTheRock 7 жыл бұрын

Benjamin Cole When Vader decapitated the main characters?

@planbskater19roblox27 7 жыл бұрын

Abe The Rock and when all the main characters died getting the plans?

@christianoh98 7 жыл бұрын

planbskater19 ROBLOX Delete your channel.

@planbskater19roblox27 7 жыл бұрын

christianoh98 lol no kid

@josesoto-ec2my 7 жыл бұрын

Wow Bob that looks freaking awesome!!

@Iliketomakestuff 7 жыл бұрын

Thanks!

@DIYGene 6 жыл бұрын

Very very cool project. Nice work!

@Rouverius 7 жыл бұрын

"Great shot kid, that was one in a million!"

@florentsaliu9414 7 жыл бұрын

man thanks I love star wars

@Iliketomakestuff 7 жыл бұрын

me too!

@florentsaliu9414 7 жыл бұрын

Nice I can't wait till the new one comes out!! Are you excited ?

@Iliketomakestuff 7 жыл бұрын

Florent Saliu of course!

@florentsaliu9414 7 жыл бұрын

Nice man !! 👍

@judasruiz3908 7 жыл бұрын

I Like To Make Stuff hi

@hempstead.studio 7 жыл бұрын

This is great. Super well spoken & a ton of useful information. Thank you!

@JWoodard93 6 ай бұрын

7 years old and I still watch this regularly because I want this helmet over any of the star wars helmets out there

@lachieclements6859 7 жыл бұрын

"RKGIENFJEJFMEKDKE" (We need a Death Trooper helmet!)

@loop5720 4 жыл бұрын

yeeeeeeeeeeeeeto

@ShareTN 7 жыл бұрын

*Spoiler alert* Han Solo dies. Errr, no. I mean. Chewbacca loses hair and a ball of it gets stuck in his throat and eventually dies.

@Packhuffer 7 жыл бұрын

Wrong, leia is revealed as Chewie's grandmother and is killed by the shock. You clearly haven't seen the movie, so don't act like you're smart.

@ShareTN 7 жыл бұрын

Sir Skeletor I've seen all nine movies and the story goes like this. The whole series is just a dream of Chewbacca during a long journey in the Millennium Hawk. :P

@Packhuffer 7 жыл бұрын

ShareTN False, there are 11 movies and they are all dreams of Chewbacca but the 10th one it is revealed that Jar Jar Binks is snoke and Ham Solo is killed by his son, jar jar banks.

@ShareTN 7 жыл бұрын

Sir Skeletor hahaha. I'm waiting for the 12th to come out. They say C3PO and R2D2 finally make it to the third base.

@Packhuffer 7 жыл бұрын

ShareTN Wait, wtf.

@AndrewArsenal 6 жыл бұрын

Wow that's amazing. Well done!

@royg1908 6 жыл бұрын

That's about as awesome as awesome gets. Excellent job.

@Bretts_Builds 7 жыл бұрын

Bob help, I made the helmet and now I can't find the tools I'm looking for.

@z6n387 6 жыл бұрын

I've always been on the jedi's side, After watching this I think I want to be a storm trooper now! xD

@RandomFilmmaker 7 жыл бұрын

I saw a great trick for weathering from Frank Ippolito where you first lay down a silver coat and apply some toothpaste to it so that it looks like it is scratched. Than you go over the whole thing with your main color and when it is set you can just simply wipe the toothpaste away and you are left with awesome scratches.

@brendonwheeler2853 7 жыл бұрын

Wow that looks amazing and very time consuming. Good job and I wanted to recommend placing window tint or any kind of film with adhesive on the direct middle of the piece you are trying to cover. It will help remove all of the air bubbles due to the middle pushing air outward.

@justliam2768 7 жыл бұрын

Man, this is amazing. Technology is leaving me trailing. I'd love to get into all this but my brain just won't learn computers.

@Insane98 7 жыл бұрын

You realy should make the rest of the armor. After that put it on a dummy and put it in a corner :O :D

@Jeroen_93 7 жыл бұрын

Great idea

@hugopohlak5831 7 жыл бұрын

Dennis And it would take ages to make

@doubledarefan 7 жыл бұрын

Work that into the Star Wars Nativity Scene.

@squigglylines420 7 жыл бұрын

yesh eyshhsheyadsadaseeeeeeeya

@anonymousr1918 4 жыл бұрын

This is absolutely amazing good job man!

@karinaaaaah6 2 жыл бұрын

Great job! Came out awesome !!

@Joran2004 7 жыл бұрын

Make a shoretrooper gun!!

@Iliketomakestuff 7 жыл бұрын

It's actually on the printer right now (not my model, one that someone sent me) I'll probably be building it on my Twitch live stream over the coming weeks. www.twitch.tv/iliketomakestuff

@Joran2004 7 жыл бұрын

I Like To Make Stuff okay nice👌

@theinfernostud6226 6 жыл бұрын

Joran It has a name u know I think it's called E-something

@pfcthomasw.9394 4 жыл бұрын

Lil Jo-Jo Great idea 😇👍🏼

@emotisean 7 жыл бұрын

Get ready to go viral!

@genegladwell8613 6 жыл бұрын

Awesome job!! Looks great!

@uuddlrlrbas 7 жыл бұрын

Now this is a guy with a lot of patience. I like this guy. Very precise with everything why is no one else like this in today's generation?

@causalmcnuggetsletsplay5164 7 жыл бұрын

Jindevilt V hi

@ChadBravez 7 жыл бұрын

I'm a Star Wars nerd to or fan

@brandino4466 7 жыл бұрын

Can you make one without a 3D printer? I don't have one :(

@Iliketomakestuff 7 жыл бұрын

Some people have done it with EVA foam floormats.

@brandino4466 7 жыл бұрын

I Like To Make Stuff Are there any videos of that? I really want to make one

@Iliketomakestuff 7 жыл бұрын

Death Star productions don't know if this helmet in eva specifically, but check out my Batman helmet video to see the process. Also, check out everything from Punished Props.

@brandino4466 7 жыл бұрын

I Like To Make Stuff is there a template? Or do the have a tutorial how to make it

@VAULT-TEC_INC. 7 жыл бұрын

Death Star productions My local library has a 3D printer that anyone can use. Check for similar resources in your town, such as high schools or park districts.

@CarlosMorales-wk5bg 5 жыл бұрын

Great job man. Such patience

@jasper_fb7273 7 жыл бұрын

You are such a talented modelist! I feel like they should have used this in the film.😊

@Gemini_Luv23 7 жыл бұрын

Spoiler:Your awesome dude

@Iliketomakestuff 7 жыл бұрын

I SAID NO SPOILERS!!!! oh.. thank you :)

@kackmann4016 7 жыл бұрын

can I have that?

@PabloColazurdo 7 жыл бұрын

my son is a big fan of star wars and he loved this project...thanks for sharing

@InsufficientFare 7 жыл бұрын

whats great is that it doesnt have to be screen accurate at this point. its your variant now and you can add your own embellishments to the armor. Great Job, totally inspired me to make one. I dont have a 3d printer but i have a heat gun, a few 3L soda bottles, spray paint and a few hours to kill im sure i can knock something out.

@AlexDestaK 7 жыл бұрын

3:39 huge

@loop5720 4 жыл бұрын

So big.....

@loop5720 4 жыл бұрын

*That's what both of the opposite males said*

@yaboijjonah._.1815 7 жыл бұрын

When will you make a he man sword

@Iliketomakestuff 7 жыл бұрын

I made it on my live streams on Twitch a while back. www.twitch.tv/iliketomakestuff

@yaboijjonah._.1815 7 жыл бұрын

I Like To Make Stuff is there a way to rewatch that stream

@Iliketomakestuff 7 жыл бұрын

Robby Collins They stay on Twitch for a little while but fall away after a certain amount of time. Unfortunately that one is gone by now :/

@yaboijjonah._.1815 7 жыл бұрын

I Like To Make Stuff aww man I was really looking forward to making a he man sword

@danielmaloney128 7 жыл бұрын

I like it can you make me some clone trooper armor? I would love it.

@StonerEyes420 7 жыл бұрын

That's an AWESOME job dude!

@NERO-ez1mn 5 жыл бұрын

i really like how true ARTIST do their JOBS; perfectionist

@ParkRanger2000 7 жыл бұрын

It's Scarif Trooper.

@Iliketomakestuff 7 жыл бұрын

No. Scarif is a planet. They're called shore troopers. www.starwars.com/databank/shoretroopers

@Iliketomakestuff 7 жыл бұрын

The Rebellion I've only seen them called that by people who don't know that they're called ShoreTroopers.

@ParkRanger2000 7 жыл бұрын

+I Like To Make Stuff Hey, I'm just saying they're called by a different name. You can call them what you want to call them.

@vcrazy_diamond 7 жыл бұрын

Star Wars Battlefront calls them Shoretroopers buddy.

@ParkRanger2000 7 жыл бұрын

Ok, but they're called "Scarif Troopers", too.

@richmbailey 7 жыл бұрын

Very cool how to. Helmet turned out great.

@Iliketomakestuff 7 жыл бұрын

Thanks!

@angieroxy7550 2 жыл бұрын

That looks amazing!

@BarranteMotion 7 жыл бұрын

I've found that a cheap marble tile or pastry board has an incredibly smooth an rigid surface for sanding. Use some rubber cement on both the sand paper and marble. Let dry then stick together. Great to doing edge joining of small parts... also works awesome for sharpening chisels with a jig.

@rickytoddbotelho9555 7 жыл бұрын

You did a fantastic job. Man oh man.

@SteveSenar 6 жыл бұрын

This. Is. Awesome!!! You even sound like a real stormtrooper when you put it on!

@kevin-wj5pq 6 жыл бұрын

How is this imperfect..... its perfect!

@hienthinh2879 5 жыл бұрын

Wow so much time and hard work you put in , thank you for sharing

@ryancollins312 7 жыл бұрын

This looks pretty amazing how you turn a image into this 3d item

@neoexplains 7 жыл бұрын

The image is just for reference when he models it in 3D

@thomaszanis4049 7 жыл бұрын

I recently was informed of an technique that has been working for me. You thin out the bondo with some acetone or rubbing alcohol. this allows you to put on thinner layers to fill inthe layer lines. i use 400 grit sand paper to smooth it all out.