Illinois watch restoration part 6: refitting the impulse (roller) jewel

  Рет қаралды 3,028

Timely Vintage Watches

Timely Vintage Watches

2 жыл бұрын

Here I shellac the impulse jewel from my Illinois Bunn Special back into its hole in the roller. This is a bit challenging because the hole is round, while the jewel is D-shaped.
When I first saw the jewel, I was sure I had the wrong jewel and the original had been lost. However in discussions online since shooting the video I have learned that sometimes watch companies did just make round holes because it was cheaper, and then fit a standard D-shaped jewel.
Thanks for watching, and happy shellacking!

Пікірлер: 11
@boydsargeant7496
@boydsargeant7496 2 жыл бұрын
Another fascinating and well described execution! Loving it!
@home-dp6oh
@home-dp6oh 2 ай бұрын
I feel your pain brother. 2 things I hate the most: fitting roller jewels and hairspring work.....
@watchtock8818
@watchtock8818 2 жыл бұрын
Very nice. Thank you.
@WristwatchMedic1953
@WristwatchMedic1953 Жыл бұрын
Very informative video. I enjoyed it and learned a lot. Thank you
@timelyvintagewatches
@timelyvintagewatches Жыл бұрын
Thanks Darryll, glad to hear it!
@Mars-zgblbl
@Mars-zgblbl Жыл бұрын
Thanks for this. Any idea why the impulse jewel should be aligned at 90° to the balance arms? Provided the hairspring collet is aligned properly relative to the impulse jewel, the alignment of the balance wheel shouldn’t matter, unless this is a convention to make it easier to remember where the hairspring collet should be pointing.
@timelyvintagewatches
@timelyvintagewatches Жыл бұрын
I agree this is likely just convention. I can't remember what I said in the video but I don't think I have ever heard a very compelling reason. One might be that you don't want the impulse jewel under an arm, because you may want to view the escapement action. Another would be that you want to do as little poising as possible, so you should put it back as originally constructed, i.e. 90 degrees from the arms. But I agree that is not in itself a compelling answer why it was set up that way in the first place.
@Mars-zgblbl
@Mars-zgblbl Жыл бұрын
@@timelyvintagewatches That makes a lot of sense
@victorlozano7738
@victorlozano7738 9 ай бұрын
Question: What kind of alcohol are you using on that video?
@ronperez9956
@ronperez9956 Жыл бұрын
Whoever build these watches to start with are genius. I mean who would think a wood finish (shellac) to mount a jewel is perfect. Then again I think who discovered shellac? Isn’t shellac bug guts? 😂
@timelyvintagewatches
@timelyvintagewatches Жыл бұрын
Wikipedia says it is excreted by the female lac bug. Gross! Gross but useful! 😂
Illinois watch restoration part 7: movement assembly and oiling
25:37
Timely Vintage Watches
Рет қаралды 3,4 М.
Aliexpress Jewelling Tool ( Is It Any good )
4:17
Click Spring Reviews
Рет қаралды 4,7 М.
Жайдарман | Туған күн 2024 | Алматы
2:22:55
Jaidarman OFFICIAL / JCI
Рет қаралды 1,7 МЛН
Неприятная Встреча На Мосту - Полярная звезда #shorts
00:59
Полярная звезда - Kuzey Yıldızı
Рет қаралды 7 МЛН
아이스크림으로 체감되는 요즘 물가
00:16
진영민yeongmin
Рет қаралды 22 МЛН
Balance staff repair - The Easy Way
11:15
Chronoglide Watchmakers
Рет қаралды 3,6 М.
Replacing a Broken Impulse Jewel ( Quick Tips ) Part 2
7:26
The Watchsmith
Рет қаралды 4,6 М.
Waltham grade 225 watch restoration part 2: making a new jewel setting
24:38
Timely Vintage Watches
Рет қаралды 2,7 М.
Setting an Impulse Jewel- Made Easy
26:25
Watch Repair Tutorials
Рет қаралды 13 М.
Illinois watch restoration part 8: lift angle calculation & positional timing
26:37
Illinois watch restoration part 3: pivot filing and burnishing in the Jacot tool
27:18
This SIMPLE TRICK Changed Everything for me
19:13
Watch Repair Tutorials
Рет қаралды 35 М.
How to Replace a Watch Jewel and Horia (clone) Tool Review
20:26
Watch As I Learn
Рет қаралды 23 М.
Watch Roller Jewel Replacement - Step by Step jewel restoration
15:00
Жайдарман | Туған күн 2024 | Алматы
2:22:55
Jaidarman OFFICIAL / JCI
Рет қаралды 1,7 МЛН