Impressive 4-Axis Non-Planar 3D Printing
Рет қаралды 624,920
Күн бұрынThe RotBot is a 4-axis 3D printer that allows printing completely horizontal overhangs without any support structure. Let me show you how it works, how you slice part for it, and what the limitations of the technology are. And the best thing is, that the Toolhead, as well as the slicing scripts, are fully open-source! Let's find out more.
Check out our CNC Kitchen products at cnckitchen.store/ or at resellers www.cnckitchen.com/reseller and on AMAZON (EU) geni.us/s8rYtQ
Head to squarespace.com/CNCKITCHEN to save 10% off your first purchase of a website or domain using code CNCKITCHEN.
Website article: www.cnckitchen.com/blog/the-r...
Thanks to the ZHAW for inviting me: www.zhaw.ch/
💚 Support me 🙏
Patreon: / cnckitchen
Join as a KZfaq member!
Shop at Matterhackers(US): www.matterhackers.com/?aff=7479
Buy a Bambu Lab printer 🐼: geni.us/BambuP1S
Buy a Prusa printer: geni.us/CNCKPrusa
Shop at SliceEngineering: www.sliceengineering.com?p=rJPWEcsm_
Shop at 3DJake(EU): geni.us/zHvnB
PayPal: www.paypal.me/CNCKitchen
🎙Check out my Podcast with Thomas Sanladerer: / @themeltzone
📚 Further information:
RotBot Toolhead Files: www.printables.com/model/2887...
Conical Slicer: github.com/RotBotSlicer/Trans...
Paper on the RotBot and Conical Slicing: www.mdpi.com/2076-3417/11/18/...
Universal Slicing by Rene Mueller: xyzdims.com
LeChuck by Wekster: / posts
Spider Man by Eastman: thangs.com/designer/Eastman/3...
⚙ My gear:
🎥 CAMERAS & LENSES
Panasonic GH5 - Professional 4k60 camera: geni.us/LMN0CmS
Panasonic GX80/GX85 - Great value system camera: geni.us/M2Sm
30mm f2.8 macro - Great Macro Lens (80% of my videos): geni.us/vEwqD
10-25mm f1.7 - Awesome Lens: geni.us/ZTBH
12-35mm f2.6 - Great Allround Lens: geni.us/S9GOsr
14-140mm f3.5-5.6 - My go-to travel Lens: geni.us/fSAyKo
25mm f1.4 - Nice prime for photography: geni.us/mqWM
🎙AUDIO
Rode Video Mic Pro - Shotgun mic: geni.us/6JFRdJ
Rode Film Maker Kit - Wireless mic: geni.us/XMD2N
Rode NT-USB - Studio Mic: geni.us/YVONvy
🔴 LIVE STREAMING
Elgatoo Stream Deck: geni.us/ppIiAL
Elgatoo HDMI USB Capture Card: geni.us/imhD
Logitech C920 - Overhead camera: geni.us/ViVgB
Follow me on Twitter: / cnc_kitchen
Follow me on Instagram: / cnckitchenyt
Chapters
00:00 Introduction
01:37 Trip to the ZHAW in Switzerland
03:02 RotBot Toolhead
05:17 Conical Slicing
09:07 Limitations
11:50 Sponsored Section
#3Dprinting #4-axis #nonplanar
DISCLAIMER: Part of this video was sponsored by Squarespace.
FTC Disclaimer: A percentage of sales is made through Affiliate links
@CNCKitchen Жыл бұрын
What do you think about the RotBot and Conical Slicing? Niche application or the next evolution of 3D printing!
@NoobHuman Жыл бұрын
wow
@Sky_Shaymin Жыл бұрын
I've always been interested in multi-axis printing but there is like no software support. Their approach to slicing is super interesting and makes a ton of sense!
@nf1nk Жыл бұрын
I want to know more about the potential strength increases. This could be really big. I also want to see what happens when you try to build more complex parts.
@MrGerhardGrobler Жыл бұрын
As you said, mind blowing. I mostly use my printfarm to print nosecones for the model rocket kits I sell. Due to the method of layer adheasion they have a weakness for dropping hard surfaces. This method could change the way the layers form this making them stronger without needing more infill or walls.
@Penofhell Жыл бұрын
Anything that helps in reducing the mechanical anisotropy of printed parts is welcome, that actually interests me more than the overhangs not needing supports because for that we have many solutions (good profile and printer tuning for easily removable supports, dissoluble supports) whereas we don't have a lot of ways to drastically increase inter-layer adhesion. Having used a Blackbelt printer in the past, just having a different strength distribution was already quite interesting, this new concept must be even more exciting ! What about doing some mechanical tests on these conical printing samples :D Also, kinda cool to see some open source 3D printing from my own country :p
@DangaRanga Жыл бұрын
We are getting there folks. Our hardware has been capable of multi axis for a while. This is huge
@polycrystallinecandy Жыл бұрын
Well hardware is basically just steppers. Slicing algorithms are everything
@CNCKitchen Жыл бұрын
Now we only need to get software developers on board!
@user-ts1xp4gm1b Жыл бұрын
Actually, the hardware was never the bottleneck, as a cnc post processor programmer, we know as a matter of fact that you can add more axes on the go but trajectory calculations for that axis is a much harder task. And it gets harder as we add non linear axes. But hopefully more developer's will join on the train.
@gosonegr Жыл бұрын
And Im still forgetting to level the bed, in not a long time I will be able to forget to level the bed non planarly
@bhupiistersingh4097 Жыл бұрын
I would love to code for this project if possible, i am a CAD DEVELOPER , not sure if that can help.
@derbacksteinbacker4942 Жыл бұрын
i´m a machinist programming 9 axis mill turn on a daily basis and i can´t wait for 3d printing getting rotational axis, there is so much potential in 5 axis 3d printing. No supports, parts with reinforcing layers that are going three dimensionally over the part, that help distributing forces, reinforcing the weakspots and eliminating layeradheasion as a limiting factor etc. ...
@firebladeentertainment5739 Жыл бұрын
my thought was similiar "if we add another axis to be able to rotate the nozzle, we could smoothly switch between different print methods" but the approaches all have the same issue we need a slicer code able to execute it i think the mechanical challenge will always be the smallest part it will always be about the code that causes the slow development
@notstonks20 Жыл бұрын
Like 3d plywood
@BogusQuacky Жыл бұрын
@@firebladeentertainment5739 agreed.
@mad-0614 Жыл бұрын
I am no engineer, but I'm worried more axis might be a little two much stress and complication for the filament that we use today. And what if the new printers need different material and non of the producers catch up. Burring new printers from the beginning? Like others said we are still on the dawn of additive manufacturing. Nothing is set. I just don't trust the big industries. I will put my trust in us, the creators because this is really exciting
@derbacksteinbacker4942 Жыл бұрын
@@mad-0614 I can see this being a problem with some materials, with abs I don’t think that it would be much of an issue but I have had pla‘s that we’re pretty brittle wich definitely could be a problem
@ChristianBehnke Жыл бұрын
Seeing techniques like this shows that we're still at the dawn of FDM printing, and I'm certain that we're going to see great advances in coming years to improve speed, quality, and function!
@BigBlack81 Жыл бұрын
To me, it's like we're just getting into the Model T era of printing. We're going to places that we only dreamed of even a few years ago at this price point.
@ChristianBehnke Жыл бұрын
@@BigBlack81 It's like looking back at CD-R's when the first drives were hundreds of dollars, and wrote to $50 blanks at 150kb/s. Now we stuff GBs worth of data to SSDs in mere moments, and it costs next to nothing to do so!
@leofortey7561 Жыл бұрын
We are not at the dawn of FDM. We are simply at the point where 2.5D printing is finally getting the 3 and up axis it should have had a decade ago! LinuxCNC is open source and has had multi-axis capabilities for well over a decade(EMC was from the 90's). Why has it taken this long for additive technology to catch up? Clearly it is all about managing angles with flow, that is rather simple volumetric math. You remember that robotic FDM (6 axis + rotating table!) FDM That was YEARS ago. Where is it now? It made non-planar prints with ease. Money. That is what the real hold-up is. People want to earn a living. I don't blame them, giving thousands of lines of code away to everyone for little to no return is not very appealing in these days. Not to mention all the complaints and bug reports ;-) Multi-axis printing has been around but has only slowly been trickled to the printing world we all reside in. Maybe it also has something to do with patents.
@GigsVT Жыл бұрын
@@leofortey7561 yes it is all old 80s tech. people forget it was patents that kept it from being widely available, not tech. just wait for more newer patents to shut this down too...
@ulforcemegamon3094 Жыл бұрын
Have you seen the upside down 3D printers ? these are so cool and solve many of the problems of traditional printers !
@Pillowcase Жыл бұрын
This is one of those "why didn't I think of that" ideas. So elegant - I'm hoping it catches on.
@marsgizmo Жыл бұрын
impressive project! 👏
@CNCKitchen Жыл бұрын
Thank you! Cheers!
@britzwickit Жыл бұрын
@@CNCKitchen were you involved? I thought this is a ZHAW project
@thewanderingguy5436 Жыл бұрын
Yooooo
@licensetodrive9930 Жыл бұрын
The idea of pre-distorting the object before slicing it and then un-distorting the code afterwards to get the desired results from an existing slicer without writing a whole new slicer to do the task is genius. I did think that the extra axis would be to control head tilting, that way it can still behave like a regular FDM 3D printer, but the tilt ability would then allow the printer to do overhangs etc. without support.
@rlbrlb5109 Жыл бұрын
This is what one of the rocket manufacturer does with its 3d welding machine to print the whole tank. Its slices and adds some pre-deformed calculations and so when it prints it is now a proper print. This is done because welding deforms the metal so without this technique it would be a very distorted tube.
@megasievert Жыл бұрын
An IDEX printer which combines both technologies would be absolutely killer. One printhead could completely cover the weaknesses of the other, and it still eliminates significant waste because IDEX doesnt need a large purge tower.
@Unmannedair Жыл бұрын
Pre deforming the part and then running it through a regular slicer is freaking brilliant. I can't believe I never thought of that. There is so much you could do with that. Heck screw cones, use a parametric curve. No more shear planes that way...
@CoolAsFreya Жыл бұрын
If you can get the RotBot team to print you some testing dog bones and some test hooks I'd love to see a strength comparison of this conical slicing compared to planar slicing!
@pazdziorz Жыл бұрын
Absolutely! For a vertical dog bone, there's quite a bit more inter-layer surface area for bonding.
@CNCKitchen Жыл бұрын
Working on it!
@ronnybergmann7569 Жыл бұрын
Wow, this looks huge! Simple, yet effective. Making it open source will make it possible for many people to try out this new technique and improve the design further. Maybe a design with an additional axis to tilt the printhead between -45 and 45 degrees could take care of the inwards facing overhangs.
@movax20h Жыл бұрын
I would reall love to see this 6-axis printer, with tilting base. This should make printing overhangs with no support even better, but of course it is more complex and costly, so this modified prusa with tilted nozzle is an interesting cost-effective option.
@CypherAod Жыл бұрын
my employer makes 5-Axis CNC machines which have FDM functionality as well.
@michaelwuthrich72 Жыл бұрын
@@CypherAod And what slicer do you use with it?
@DragnDon Жыл бұрын
@@greatestevar Given that WE would not be programming it, your claim applies to the select few who will do so, the rest of use would just be users of the software….but even then, not so much as 6 Axis machines have been around for awhile. So it’s not like the human race hasn’t had any experience with it. Also, there was one int he video. So it has already been done.
@DragnDon Жыл бұрын
There was one in the video….
@JonS Жыл бұрын
I’m glad you finally got to go and see this. I was hoping you would since the it first hit the 3D printing news sites. Very interesting indeed. The conical slicing is a clever trick. With some effort, I could see it being somewhat more generalized with a tool that segments a more complex part in to blocks each having their own pre-warp and post slicing de-warp.
@tvathome562 Жыл бұрын
Wow that spinning head made my head spin, had to watch this twice & finally understood the basics about conical slicing, thanks for explaining that Stephen.
@TheUeffects Жыл бұрын
This was a truly great video, you made the complex Sclicing understandable for the masses.
@dustinmeier9753 Жыл бұрын
I like these non planar printing discussions. And adding more axis it’s always good too
@checkavilatility Жыл бұрын
Thank you for bringing this to our attention! Fantastic!!!
@AndyLaurence Жыл бұрын
This is amazing. I'm looking forward to seeing your tests on the strength of parts made using this method.
@DigiLab360 Жыл бұрын
Finally, 3D Printing is moving beyond 2D. Kudos to the team. Now we need Slicers to catch up with hardware.
@Vez3D Жыл бұрын
Thats tottaly amazing!! Hope to see that in a future very close. Thanks for sharing this video man
@gerhardachrainer6116 Жыл бұрын
VZbot might need a Hevort bed; this would work great then…
@TheNextDecade Жыл бұрын
I’d almost be impressed if I didnt just see a 5 axis machine on a Prusa i3 earlier today. ERRF attendees talked about you a lot today Stefan! Hope we can see you at a future ERRF!
@CNCKitchen Жыл бұрын
Thanks! I'm a bit heartbroken to not be at ERRF this year but it was just too much traveling for me this month. I'll hopefully be there next year.
@retroluminico Жыл бұрын
This is the coolest thing i've seen in this week. Danke Stefan
@Max_Marz Жыл бұрын
I think this the the best and decievingly the simplest approach to the non-planar slicing thought process.
@deandavies1462 Жыл бұрын
Another great video, the cutting edge of 3D printing is not exposed enough, great job for showing this. More content like this wouls be welcome.
@CNCKitchen Жыл бұрын
Thanks! Appreciate this!
@TheWoodWorkingPilot Жыл бұрын
I love this video and would love to see more of this kind of videos on new developments in the field
@abyzma201 Жыл бұрын
watching the RotBot print is so mesmerising!
@kevinm3751 Жыл бұрын
This is a fantastic idea and what would make it even more versatile is to have a head that can tip to any angle instead of just a predefined 45 degree angle. I could see taking a dual filament machine, setting up one head on the 45 and the other on the standard and then creating the code so that the best head is used for each independent layer.
@CNCKitchen Жыл бұрын
There is a 5-axis version of this somewhere around (I think even Rene Mueller built one) but this introduces even more complexity into slicing and flexibility into the tool head.
@csrpazzi Жыл бұрын
I'm always amazed by the insightful videos you create, they are very interesting. Great work.
@CNCKitchen Жыл бұрын
Thank you very much!
@aliebada Жыл бұрын
I think it is "next evolution of 3D printing", as this will help speed up CAD/CAM effort, material waste, more automation. Yes, will be slow and hard at first but it is an investment in the right place. I have been trying to do the same and seeing this is very encouraging , thank you for awesome content!
@dbracer Жыл бұрын
I've been looking forward to non-planar layer deposition for a long time, but mainly to improve top layer surface quality. Extending it through the part looks likely to significantly improve part strength due to the effect you mention.
@darkfoxa Жыл бұрын
This is incredible!! Just the cost this cuts in filament is outstanding
@OmikronPsy Жыл бұрын
This is amazing!! Fantastic work! The maths behind the scripts must be quite hefty.
@CNCKitchen Жыл бұрын
It's honestly really simple.
@avejst Жыл бұрын
Impressive find Great video as always 😀 Thanks for sharing your expirence with all of us 😃
@Busa123gum Жыл бұрын
What a great idea, this is going to change everything
@carlosfrostygreen6855 Жыл бұрын
I need this. Thanks CNC kitchen.
@rafamuratt_ Жыл бұрын
Hi Stefan this is amazing and I'll have a look for details for sure, I'm thinking to update my diy Prusa based 3d printer, as soon I have a time I'll start to implement it, thanks for sharing!!! Greetings from Cham/ BY
@mikeschtheliar545 6 ай бұрын
Michael is my Professor at the ZHAW!! I really enjoy his lectures.
@jeffersonsharp2292 Жыл бұрын
Waiting anxiously for the strength tests. Exciting.
@anonony9081 Жыл бұрын
Respect to whoever programs the slicer for these things . I can't imagine how you do that
@Schnorzel1337 Жыл бұрын
There is an chinese approach which does the following: 1. Define the object in a voxel grid. (Small box of size dxdxd, where d is the diameter of the nozzle) 2. Calculate the reverse print aka how a CNC machine would destroy our object in layers, one voxel at most per layer. 3. Calculate the moving convex hull of our object, while simulating the print. 4. Calculate reachability of voxels, while simulating the print. 5. Use 2/3/4 to define an order of voxels to print, while printing on existing voxels. 6. When done, combine the voxels of step 5 to groups of voxels. 7. Calculate the actual geometric layers, from step 6. => The result are 3D complex layers that can only be printed on a 4+ Axis system.
@finncreatesshorts Жыл бұрын
Looks very impressive!
@MacroAggressor Жыл бұрын
Really interested in a parts strength testing episode on this! Very cool tech.
@RinksRides Жыл бұрын
Stephan never ceases to amaze with his ideas to cover the unique and fringe applications of 3D printing and the excellent quality of his videos, congratulations and thanks. This technique would be perfect on my TronXY X5SA-400 or ANY large format printer were you can imaging printing a section of a car bumper skin that no mater how you angle it in slicer still has considerable overhangs, print time, and waste plastic, With this printing technique, there would be essentially no supports (or very minimal) and print time would be dramatically reduced, and waste almost eliminated.
@billyjoe3309 Жыл бұрын
When companies perfect this, just like CNC's, it's going to be EPIC.
@JonathanFisherS Жыл бұрын
Ok the "pre deformation" step is absolutely wild! _that_ is fricken cool
@kippie80 Жыл бұрын
Brilliant! I think there really is something here.
@RadioactvPanda Жыл бұрын
Awesome video!! I'm tempted to give it a go!! Thanks for sharing!
@CNCKitchen Жыл бұрын
Appreciate the SuperThanks! Definitely take a closer look at it and if it's just the "Variable Angle" Version for regular printers.
@TechsScience Жыл бұрын
Amazing concept
@atomicT4 Жыл бұрын
Danke für das Klasse Video hoffe sowas wird weiter entwickelt. 💪💪💪💪
@br88dy Жыл бұрын
The hobby needs new ideas like this to keep the fire going
@glitchy_off Жыл бұрын
Wow I can see this system on future 3d printers!
@brookspotts9312 Жыл бұрын
This is pretty incredible
@TheZombieSaints Жыл бұрын
Wow! Amazing stuff. Thanks for showing us all this. Just amazing
@jarikeinanen7713 Жыл бұрын
Wonderful, removing support structures is huge save both in time and material. Huge step into advance 3D-printing
@nf794 Жыл бұрын
Finally i hope quality manufacturers will put more Research and development into this
@truantray Жыл бұрын
This is essential for FDM to move forward. We have stalled on 2D printing + Z (a more accurate description) and weak layer adhesion. Would be interesting to see strength differences and see if we can get true anisotropy. The next step would be a rotating nozzle from 45-90 degrees.
@Rhannmah Жыл бұрын
I want this on my printer yesterday. I hope Prusa3D is taking a good look at this and trying to implement it, because I would buy that printer instantly. I do mostly mechanical parts and not having to worry about overhang limitations is an absolute gamechanger.
@Dangineering Жыл бұрын
HOLY SHIT I AM OBSESSED WITH THIS. This is amazing work
@breezetix Жыл бұрын
1:45 i love how they're using high voltage insulators and cables as supports (or looks) that's cool :D
@Yaivenov Жыл бұрын
It has been amazing watching an entirely new manufacturing discipline take form.
@timothymonk1356 Жыл бұрын
Having access to conical slicing would be really interesting for certain applications, I think especially so if you want to make a print watertight, so having it on most printers would be really cool
@Drcfan Жыл бұрын
I studied there 4years ago mechanical engineering with focus in 3D printing. Nice to see it on youtube
@CNCKitchen Жыл бұрын
I really enjoyed visiting the ZHAW!
@pashkamake1799 Жыл бұрын
Great thanks for still good and interesting videos!
@triblade1669 Жыл бұрын
I would love to see them print some of your test parts so we could see how much of a strength improvement it might make.
@philipps3ddruck Жыл бұрын
Alleine die Bewegung des Druckkopfes ist schon einfach nur satisfying 😀
@CNCKitchen Жыл бұрын
Ich hab' minutenlang einfach nur den Druck angeschaut. Wirklich toll!
@dadsfriendlyrobotcompany Жыл бұрын
As someone who managed applications for a 5 axis 3d printer building company, this is huge! We've mostly used a modified version of Mastercam, which doesn't really make itself available for makers, let alone the custom plug in.
@QuintenKilborn Жыл бұрын
I've never seen anything like this. this is the future of 3D printing
@MrGerhardGrobler Жыл бұрын
Amazing, and about 50% over my head. the rest makes me happy to follow your channel.
@CNCKitchen Жыл бұрын
I hope I was at least a bit able to explain the principle in an easy to follow way.
@MrGerhardGrobler Жыл бұрын
@@CNCKitchen You where. I was making fun of the fact that I am still so uneducated in many things. Watching your channel teaches me many things. So thank you for your hard work. Baie dankie, ek sien uit na die volgende video.
@kkloikok Жыл бұрын
I'm really excited for mainstream non-planar printing and slicing. I hate wasting material because I just never throw the stuff away. And from an engineering standpoint being able to compensate for the (material) non-linearity of 2.5D printing with non-planar printing is a huge improvement.
@The_Privateer Жыл бұрын
Definitely interested in strength testing of this method of printing!! 💯
@michaelwuthrich72 Жыл бұрын
Thank you for the great video Stefan. Very well explained (I could not do it better... ;-)).
@CNCKitchen Жыл бұрын
Thanks for the opportunity to visit you!
@DBB-KE5DUO Жыл бұрын
4D printing is going to be big! My biggest problem with small parts is the supports! i’ll be busy researching this!! 🎉
@Jackrabbithero Жыл бұрын
This seems really similar to your non-planar 3d printing video you made a little while ago! It's cool that so many tricks can be pulled off by modifying what the "plane" is in planar slicing, and it feels like we're just scratching the surface of what's possible.
@Mike01Hu Жыл бұрын
Great video Stefan. I suspect the mechanism can be simplified substantially, so it will not be long before we see neater ones. Do follow up on the conical slicing topic and what can be achieved with our current printers.
@ChrisJohnson-tn1mo Жыл бұрын
Would live to have one. Its like adding a new specialty machine to your production inventory. 👍🏼
@satibel Жыл бұрын
An approach to fixing the inward overhang would be morphing the stl non uniformly, basically instead of a 45° cone, you could make it so that along the y axis you are at 45° inward, and along the x 45° outward, making a saddle shape or even slicing inwards to 1 inch off of the center, and then outward, it's fairly free, you're already converting cartesian to polar and then scaling up or down, so you just have to apply a curve that takes into account the position along the polar coordinates and applies a pair of curves instead of a set angle from just the distance. Automatic overhang detection exists, so mapping overhang position vs the angle and distance should be doable, and automatic curves may be created.
@cooperised Жыл бұрын
You're exactly right. Came to the same conclusion as I watched. Some of the edge cases could be trickier to fix - detecting and modifying travel moves that would otherwise result in a crash, for example - but not impossible I'm sure.
@bobthecannibal1 Жыл бұрын
The big concern with that is collisions. There are cases where you can't get a tool (nozzle) in the space available with any arbitrary transformation.
@cooperised Жыл бұрын
@@bobthecannibal1 Good point. Sounds like an interesting problem though. No need to complete one "layer" before starting the next, necessarily, so perhaps there's an ordering problem buried in here.
@T3KFTW Жыл бұрын
This is the peak of 3d printing
@aidenbagshaw5573 Жыл бұрын
I think I might try to implement 5-axis in my next printer build to future proof it. (Adding rotation and adjustable angle.)
@schm4704 Жыл бұрын
Like all great ideas, this is surprisingly simple once someone explains it to you 😀.
@AdventTourist Жыл бұрын
what a time to be alive!
@xxxanonymousexxx Жыл бұрын
Very cool and amazingly practical in the engineering. I think there is a great potential in a slicer on a standard printer that could just do even a small conical angle, to improve print strength.
@dodaexploda Жыл бұрын
I'm hoping that Prusa is internally testing this out. I'd totally buy one of these.
@matts2581 Жыл бұрын
Strengthening of prints beyond the standard print axis - totally fresh. :)
@sortofsmarter Жыл бұрын
I was wanting to get a 4th printer and didn't have a idea what I wanted...I think this is a great project to build...
@navid9852 Жыл бұрын
Conical slicing! Super impressive.
@seanburke997 Жыл бұрын
Wow, this is awesome.
@nickysze2673 Жыл бұрын
mixing the spider bit with the idea you created a robo cat that knocks everything over it think Black Kitto would be a cool and funny name
@JamesElise160 Жыл бұрын
Looks really interesting, will keep an eye on it, and when bed levelling is re-introduced, I think I’ll probably convert a prusa to one.
@Psychlist1972 Жыл бұрын
This feels like the beginning of something really important
@TheTomCruiseLover Жыл бұрын
This is insane!! 👏👏 It's like an anet A8 printer with a 6 axis robot arm! This one little mashine that thinks it can brings all my hope up for mankind
@perryto7856 Жыл бұрын
Creality, hear this guys out! XD (amazing video as always my friend. Regards!)
@NoobHuman Жыл бұрын
spinning head...... it's so fascinating!
@adama1294 Жыл бұрын
Sounds like the industry is going forward. Might be great as a separate tool head in the Prusa XL. There is also the the opportunity to and an additional axis for all angles for the extruders.
@adhiee1911 Жыл бұрын
Mini CNC at homeeee finallyyyyy
@odinata Жыл бұрын
I love it when Shtefan shtarts talking about shtepper motors
@OsioPandaPeludo Жыл бұрын
This is the next step for mainstream 3D printers. What a great time to be alive!
@XavierSanchez Жыл бұрын
Interesting creativity.
@3th553 Жыл бұрын
i am buying this as soon as possible
@bungsbodulus Жыл бұрын
Ever since I saw the cr-30 and its weird overhang requirements, Ive been thinking about a printer that could rotate the hot-end all the time! Its so crazy to see something straight out of dream-land!
@ERJKILLER Жыл бұрын
Incrivel obrigado por partilhar! (Awesome thanks for sharing!)
@superbrain3848 Жыл бұрын
would be intresting to try it on printer with kinematic beds, who would be able to mitigrate the digging of the nozzle into the already printed lines a bit
Қайрат Әділгерей, Muyun Brothers, Аманғали Сыпабеков, Нұргүл Даубаева ҚЫЗЫҚ TIMES | Хотя бы кинода 3
Marat Oralgazin
Рет қаралды 884 М.
Engineer Unleashed
Рет қаралды 57 М.
Zack Freedman
Рет қаралды 360 М.
Made with Layers (Thomas Sanladerer)
Рет қаралды 136 М.
Nir Gaming
Рет қаралды 2,3 МЛН