davidpoz improved your version of 12v to 48v but you got the credit. Your version is more simple to replicate. Thank you for the video.

Thanks Mr. Mighty Tiger Finally! Someone has shown an easy way to wire the alternator!! Thanks for the link to the rectifier!! The second I saw the schematic on it, it finally came into focus in my mind. :)

You have shown that removing the voltage regulator allows you to measure the open circuit voltage with no load, ie no current, no power. As soon as you load the alternator the voltage will drop. This is an old fashioned mechanical inverter. With an efficiency of maybe 70% . An electronic inverter can do exactly the same thing, but at more like 95% efficiency.

@7:05 How is it possible that the motor stalled even though there is no load (0 Amps) connected to the rectifier? According to the motor specs you have up to 1kW but at the output your power is calculated by 70V * 0A = 0W. Still scratching my head about it.

Dude, that was incredible! Thank you for this.

This is actually quite interesting, this would mean that you could use a USD 10 solar charge controller to charge your house lithium or deep cycle battery pack without needing an expensive DC-DC charge controller that usually cannot deliver enough amps to charge a battery within a few minutes. And with a 24v alternator and 24v battery pack, it's not efficient anyway. MPPT solar chargers condition the charging so that the batteries have a long lifespan. Someone who has experiance with this?

Is it Santa who taught you how to solder? 😂😅😂😅😂😅😂😅

Love your vids, very detailed and even greater: you provide the parts used!! keep up the great work!! if you want to try a cool project, buy a Ryobi or Ego battery power station generator and hook up these to recharge them and check out the sustainability you will get with them to power your house, this is the project im working on now. im trying to create pass-through charging that is self sustaining, even if i remove one battery to swap it out. Enjoy!!

This can be a good source of electricity for those person opted to live on RV

I don't understand why your 1 HP motor was stalling during your testing. You only had a voltmeter (high impedance) connected measuring the voltage. What work (power) was the alternator providing?

Will it build a 3000 watt power controlled device?

How to order this products which ever u can used in this vdo

I have a little 3hp briggs engine and Im Looking to get 67 volts dc out at like 60 amps. Think this little rewire trick would do the job?

Sir, show much voltage was applied to the rotor coil..?

Everything was still plugged into city power, you didn't show everything running off its own power. Please show, I love you explaining

Why did you not use the onboard rectifier?

Your videos are pretty darn cool !!!!! Very handy small projects Is it possible to make a 140-200amp alternator converted to magnet motor instead, Then have those other components ?? I’m thinking of using a truck alternator 140amps to run Christmas lights like this for the winter,

I’m just curious, if you charge a set of batteries, could you hook up a power inverter and change the DC to 120 V AC to power the motor you are using and create a continuous power supply that feeds itself? I’m just wondering if it would be possible to hook up enough batteries and alternators to eventually power the 120 V electric motor and draw enough DC power from the alternators to charge enough batteries to replace a solar unit, enough to power a home? Perpetual power is what I’m thinking.

This is gonna look weird in my engine bay, but I really wonder how I’m going to be able to drive anywhere if I’m plugged into mains. Any suggestions?

good clip

You could wire a few of these together right?? And run any Home appliance? Even 240v stuff like washing machine??

Had no idea they could work on dc 2

Have you tried installing neodymium magnets on the rotor to boost the voltage?

i dont want a volts, i just think how upgrade the amps 😢

Thankyou, I want to rig up a 24v battery charger using engine and alternator.

I haven't seen anyone using like an arduino or something to control the voltage and or current for the field windings to adjust the output for like charging an 24v or 48v battery I think this is possible

Can you make a system that will run a 1.5hp air conditioning unit?

Why would you want 70v? Or 120c or 240v much more useful or even 48v!

0:07 was that supposed to be a joke???

Wow, Thanks

Pm me to install do sola battery

Belli

parts list please

ThereAreMusicChanelsVeryGoodIfIWantToHearMusiccccccc😡