Overview of my Sig Sauer P365 X Macro TacOps. Thanks for watching! My insta: / inferior_rifles
Пікірлер: 370
@TheArmorersFix11 ай бұрын
Dude, I’m with you. I never even saw this gun coming but was stoked when it dropped. Especially with the Tac Ops. Been carrying for about 6 months. I’ve even carried it on jobs. I was considering an aftermarket slide to get around the comp of the original macro. 17 rounds! Absolutely fantastic. Got about 800 rounds through mine with one failure, which was probably the tension in the new mags. That’s what I was on the range sorting out in the first place. Sig knocked this one out of the park. Thank you for your thoughts on this one. I always respect your thoughts and opinions. 🙏🏻
@QUEST_4_FREEDOM8 ай бұрын
Do you have an optic on yours? I just saw a review that said the rear sights will NOT come off. Which takes out a good amount of options for optics. Thanks
@TheArmorersFix8 ай бұрын
@@QUEST_4_FREEDOM rear sight should def come off by traditional drifting. The rear sight channel is cut separate from the optic channel. To add a different optic outside of their spec is going to require custom milling. I’m running the Holosun EPS currently.
@QUEST_4_FREEDOM8 ай бұрын
Thank you for your response. I'm the first to admit, I'm new to optics and Optic cuts and all of that. I read that in a review. It may be on Palmetto State Armory website I believe. I was about to get a Holosun HE407K-GR X2 6 Red Dot Reflex Sight 1x and then I saw that review and now I don't know what to do
@QUEST_4_FREEDOM8 ай бұрын
It is weird too because I have youtubed and searched for Tacops p365 macro with Optics and I don't know if it's my head or what but it seemed like those had less optics on them than the other options for p365's
@QUEST_4_FREEDOM8 ай бұрын
@@TheArmorersFixhis exact words are "Optic cut does NOT remove rear sight. Hope this helps". Am I misinterpreting what he's saying?
@ExplicitBoricua10111 ай бұрын
I’ve slowly converted my XL into a Tacops, and have fallen in love with the gun I used to just like.
@valencia8324Ай бұрын
Same here. I don’t use my 19x after that
@thatoddfella11 ай бұрын
Armory Craft Ultimate Trigger Spring Kit. It's only $20 and cleans the creep and mush out of the trigger, makes it feel slightly lighter and has 100% reliability from my testing and their claims. It does take a little work to install because you have to disassemble a good bit of your FCU and striker. Wasn't too difficult with limited tools.
@great_deception6 ай бұрын
The P320 XCompact was already a G19 killer, when the P365 XMacro out, it just became embarrassing, it's hands down probably the best 9mm hi-cap carry pistol on the market today.
@MercyBlack137Ай бұрын
I’m with u on p365 but you hurt your credibility by saying the super thick p320 is a glock 19 killer
@great_deceptionАй бұрын
@@MercyBlack137 Dude don’t beat the dead horse again. Look up how many silent recalls and upgrades Glock had throughout the 90s including slamfire incidents. Don’t have a double standard.
@seijiroukikuoka597511 ай бұрын
P365XL owner here. It gets better with use.
@GOD1sCrea8tor.10 ай бұрын
me too, i enjoy it with extended clip for the extra pinky space. my everyday carry.
@TheSoilandGreen9 ай бұрын
First firearm I bought was the sig 1911 TTT. NEVER had an issue or malfunction. This was an extremely informative video. I’ll be purchasing the p-365 next.
@tax9059729 ай бұрын
Sig is solidly reliable.
@12_nine911 ай бұрын
QVO tactical sells screws that direct mount the EPS to the slide without a plate. Just an FYI.
@petesheppard17096 ай бұрын
Nice details! I'm really stoked about the smallest P365, since I pocket carry and find the small grip quite comfortable. With a 17rd mag for the reload, and I'm a happy CCW! For those interested, adding a thumb safety is dead easy; it will pop right into the circular cutout at the back of the trigger module. The hardest part will be cutting a safety slot in the grip module, if a notched grip is not available to fit the owner's preference
@RdLam100111 ай бұрын
I carry one in the chamber. definitely hard to rack the slide with a full mag. Hoping it would just break in. Love the tacops with a longer barrel vs the macro comp.
@365xmacronocomp7 ай бұрын
It will break in mine did the same thing but it gets easier
@kellz885411 ай бұрын
Was looking at one of these and a g45 about 3 months when deciding on a new ccw. It was a hard decision but i went with the g45 due to it being about $80 less and having a better finish for southern weather.
@johns643110 ай бұрын
Just bought a 45 MOS it’s perfect
@davidwilson558110 ай бұрын
I have a 19X and would consider myself more of a Sig guy. The 19X is by far the best gun I have and I shoot it better than any of my Sigs. I like the 19X so much I think I need a G45.
@Nirmk10 ай бұрын
cant blame u alot of guys who been shooting the tacops been slowly switching back to the 19 or g45 considering finish and the gun malfunctioning after so many rounds the control unit wears out after so many rounds run through them big issue with the p320 also and the finish on mine is just sub par even the the gun is thinner i cant really tell the difference in carrying my 19 or the tac ops still prints the same but i do know my glock is alot more accurate of a gun and is 3 years old and my tacops is 5 months old and looks like its been through some shit and i only have 300 rounds through it compared to my glock having over 1500 and still looks new
@chevykent7710 ай бұрын
@@davidwilson5581😂
@miketaylorID111 ай бұрын
the 365 defies physics shoots so much ‘bigger’ than it is. trigger is meh, but that’s no reason to not carry a pistol. good stuff
@RepentorPerish777 ай бұрын
I purchased one of these with the Sig Optic for $669 shipped. I think I someone made a mistake so I snatched it QUICKLY
@ghilliemanreviews10 ай бұрын
I have the normal XMacro, not comp or not Tacops. Came with a manual safety which I opted for. It is amazing! Wish the comp came with a safety but it didn’t unfortunately. I could always change mine to be that way though but I love how the longer barrel in my normal one shoots!
@vitogrimes60069 ай бұрын
Regular X Macro is the way.
@ghilliemanreviews9 ай бұрын
@@vitogrimes6006 it is amazing I’ll tell you that! I love it
@formerpilgrim49349 ай бұрын
I added a manual safety (takes 5 minues) , upgraded to the Wilson grip module while at it. If you want to beat guys with full size guns at classes or competition, this is the set up.
@tax9059729 ай бұрын
Your finger is the safety
@ghilliemanreviews9 ай бұрын
@@tax905972 duh. I still want more than one safety
@MrPerry615 ай бұрын
Also Wilson combat has made a grip module that fits the 17rnd mags. comes in 4 colors.
@JAY813ALEX11 ай бұрын
Had a catastrophic failure with a p320 and p365 using no factory ammo. Just replaced the grip module and the slide stop in the p320 and kept on rocking, Replaced the Grip module on the p365 and kept rocking. If that happens to a Glock you would have to pretty much replace the gun (serialized receiver)
@johns643110 ай бұрын
Glocks don’t have catastrophic failures 😂
@InferiorRifles10 ай бұрын
@@johns6431any gun can have a catastrophic failure. Especially when shooting reloads, like mentioned in the original comment.
@lorenjohnson353810 ай бұрын
@@johns6431your not very smart are you. Just google Glock catastrophic failures you’ll find a whole shit ton. Ammo generally causes catastrophic failures, not the gun
@SUNDAYHRS6 ай бұрын
Awesome review! I am 6'9" and also currently carry a Glock 19 Gen 5 MOS. I really want to get The X-Macro TACOPS. I'm pleased to hear the positive review coming from a big guy like myself!
@Duwils11 ай бұрын
I saw the P365 X-Macro and was impressed with the size and capacity, but not a fan of the "comp". I love my X-Compact P320, but when I saw a video of a build I thought 🤔, "If only they made this no "comp" version direct from the factory". Then I realized my prayers were answered before they were even sent. No "comp" a longer barrel, extended controls, and an easier conceal than my P320 with the WC Carry 2 grip. This will be my EDC for the foreseeable future. The EPS Carry with the direct mount screws feels like a cheat code. Now to follow up on the recommended Armory Craft P365 Ultimate Master Spring Tuning Kit.
@spencemiller58369 ай бұрын
I carry the OG 365 with a 17 round magazine...with 1 in the chamber...I love it
@365xmacronocomp7 ай бұрын
I have the p365 XL and the p365 X macro non-comp like this gun absolutely love both guns but the macro was printing more than XL so I was carrying that but then I recently found the Pegasus by DeSantis slim-tuk holster for the macro it is the best holster that I have found it holds the gun so much closer to my body and don't print at all so I've been carrying my macro again lately but absolutely love both guns I have 1700 rounds through my Excel and 1950 through my macro no issues and I have shot the cheapest ammo that I could get through both of them they've been flawless
@fredvStein6 ай бұрын
I've heard a lot of positive things from people recommending the PHLster carry system for AIWB. It allows for a very close to the body mounting system. There are several holster options that work with it : PHLster has their own, Henry Holsters, KSG armory. If you're on the fence about the Xmacro because of printing, check them out.
@TheWilliam112210 ай бұрын
Yeah I bought the xmacro comp version because that was available at the time of purchase. I like it, but it was 150 more which is crazy. If you can get the regular xmacro do it. Longer barrel, same length slide and two mags speed loader. For $649.00 vs $800.00 Tacops you get a mag flare and 2 more mags for 750.00 it’s a little better buy.
@jhl445110 ай бұрын
IMO, Tacops is definitely the best value of the 3 due to the 2 extra mags ($54/ea. MSRP), flared mag well, and extended slide release - I also prefer the 3.7" barrel over the comp version.
@harvey9478 ай бұрын
Sig must be a real treat to someone with all the heated comments I have seen on there gun reviews..I believe it’s time to buy one!
@a.d.c79419 ай бұрын
The tacops is the truth. It is my edc. Awesome shooting gun. It shoots like it’s a full size gun. I love it.
@americanpie805910 ай бұрын
Can we talk about the fly on the wall so to speak? He was sure checking out that gun in the end of the video. :)
@ox_boogie21 күн бұрын
im 6' 1 and i thought i was going crazy watching you handle this gun. i had to pull my macro out of the box just to compare
@MrSmith-zy2bp10 ай бұрын
I rented a p365 at a local range. I was shocked at how the recoil wasn't bad and obnoxious. My G19X has more of an obnoxious recoil than the p365. I definitely would want p365x for longer grip, macro maybe even better.
@4sumcrazyshit9 ай бұрын
Who is more accurate and smooth trigger?
@jerrygolden8329 ай бұрын
Just add an adapter plate and you'll have the cowitness you want. Also, fully load the mags and set aside for a couple weeks before using . I've had 5 including 10, 12, and 15 rounds, (no Macro yet) and subsequent loadings became easier. The WC modules are great. My only complaint ever with P365's was grip didn't feel right but the WC's are great. I have one on a 320 RX and big improvement. Added the WC tungsten grip weights as well.
@henryschmidt6369 ай бұрын
Sig mags marked made in USA are made by Checkmate. I just got mine and they were no longer available with suppressor height sights.
@woliver799 ай бұрын
Why did you put an optics plate? I don’t use one for mine. It mounts directly to the slide without a plate
@BanditApache-nd6lu14 күн бұрын
I own many, many. Glock set the standards and will always be king.
@devrinmg8 ай бұрын
I ditched my g19 for the 365xl about 2years ago and have pretty much carried it everyday since, I shoot it so well and am very confident with it. Loved the g19 and originally was going to only use the xl In summer as I’m a smaller guy and really had to pre plan what I wore during summer with the g19 but ended up shooting it so good just can’t see going back 😎
@mattz.77617 ай бұрын
Racking gets better with time. Got to get in and clean and lube it. Especially clean the magazines. Some of them come in from factory very gritty and dirty. Have the compensated macro and performs well.
@joellarrysr99772 ай бұрын
I just bought this as my first gun. Getting my laser sight installed today
@Sforce6810 ай бұрын
Where are you putting your support hand when your fingers are wrapping all the way around that narrow grip; is there any room on the grip for your support hand?
@FloridaMan76211 ай бұрын
your 6'8 Gyatt damn!
@TheFishingfool259 ай бұрын
Nice review. Thanks for the sight recommendation. I currently have the Sig suppressor height sights with the Holosun 507k and it takes up too much of the window. I also have the Mcarbo trigger installed, it takes up alot of pretravel check them out. It was not too much of a pain to install.
@vitogrimes60069 ай бұрын
Tacops is fine, I’d rather have the non comp, non Tacops version. I don’t like the magwell. If for some reason I need to strip/pry out the magazine it’s more difficult to do so due to sinking deeper into the grip. The regular X Macro allows the bottom of the magazine to stick out for easy access.
@cwolf88416 ай бұрын
Everybody is different. I find red dots useless and donated mine to Ukraine. I put Speed Sights on all guns. I am exploring BarSto ported barrels. Cheers
@rayjensen44805 күн бұрын
Do you like this gun better or a Glock 19 to carry regularly?
@PointWithin8 ай бұрын
I have a stock p365 and just ordered this. Gonna swap the slide and fcu into that smaller frame for when I wanna carry that. Will also get EPS carry MRS green as well so I’ll had an optic to use
@MrPerry615 ай бұрын
Have you tried the Glock 45 9mm? I have one with the holosun SCS MOS optic on it. once I upgraded the trigger it's a nice shooting pistol. I just picked up one of these X Macros yesterday.
@Daddyoftam3 ай бұрын
im brand new to pistols and the world of hand guns. whats your opinion on this 365 tac ops for a first time owner? no shooting experience.
@davecaseyjr.76576 ай бұрын
I have done the same but not the tac ops because of the extra heat the comp and ported barrel will give off and have not got completely comfortable with the Sig yet
@randolphtodacheene113311 ай бұрын
One thing I don’t like about the 365 is the trigger gets extremely hot after couple hundred rounds at range.
@4sumcrazyshit9 ай бұрын
@@tommyyuckguts5276how many thousands of rounds have fired with your Sig 365x?
@great_deception6 ай бұрын
Give us a self-defense situation where you will need to immediately rapid-fire hundreds of rounds through a pistol. It's not an IPSC gun, its a carry/home defense gun.
@ThisIsWhatIDo777 ай бұрын
I was concerned about the 17 round slide and how hard it was to rack slide. I was going to carry 17 plus one but decided to carry 16 plus one, thinking it would be more reliable. I figured if you fired first round the next round would be easier to load since there is 16 rounds instead of the harder to rack 17 round total.
@1olddirtroad7 ай бұрын
SIG has the promotional till the end of the year that you get 3 extra 17 round magazines with proof of purchase
@charitybull6 ай бұрын
I love the platform and just ordered the P365 AXG legion because I love heavier guns.
@Mike-ox1bu9 ай бұрын
Hey Man, great review as usual. Any word on Wilson Combat Grip Module or potential 365 X-Macro Tacops evolution like Equinox, Classic, Scorpion, AXG Grip or Legion? Thank you........
@BigTimberLodge11 ай бұрын
I have the same pistol and it is replacing my 43X.
@ynotjf11 ай бұрын
The Sig P320C Romeo was my Glock 19 killer after 7 years of EDC. The Sig P365XL Romeo was my P320 killer.. Been carrying the P365XL Romeo Zero for 3 years and don’t see changing anytime soon..
@HWG-wm8ld11 ай бұрын
You don’t shoot much
@ynotjf11 ай бұрын
@@HWG-wm8ld - about 1,000 rnds per year. Had 11k on my G19, 7k on the P320, 2k on the 365. Compete in IDPA & Steel.. how about you?
@DS..6910 ай бұрын
@@ynotjfSave up mehn. It'll be ok.😅
@randyiglesias15 ай бұрын
I like my sig x macro. Carries just a tad better than my g19 but honestly, they both don't carry as well as some other options. Also I definitely don't think it's a glock killer. After doing a cheap trigger job on my g19, the g19's trigger blows my macros trigger away. The comp on the sig just made it recoil like a stock g19, and after i installed a comp on my g19, there is no comparison. The compensated g19 shoots way better than my macro. Especially with the trigger job.
@charles175085 ай бұрын
Seeing how you have to count on the pistol for defense of life feel the machanics of the 19 and that sig when tbe trigger breaks on a sig its dol and weird sounding the glock crisp and its just a better gun the springs are bigger and parts dont have to be micro size .i aint rushing to bye a 800 dollar peice .
@papajim19749 ай бұрын
I can't decide between 365xl or X?.. What's the barrel length on this one above your showing? Pls tell me how the barrel length 3.1" makes the difference vs. 3.7" ?
@joellarrysr99772 ай бұрын
I went to buy the XL and my hand was still too big. With the 17 round mag this fit better.
@dylanjackson668511 ай бұрын
Very cool. Never looked at a cross breed they look comfortable
@danbaumgardner119210 ай бұрын
Check out a ProTECH micro. I like the full kydex mounted to leather.
@distilledfreedom18405 ай бұрын
I've been carrying my 3rd gen G19 w a 17 mag forever. Thinking of switching. Heard they had some safety issues? Going off in a holster and whatnot. All that worked out?
@kevinborish4 ай бұрын
That was the p320 not the 365. Only issue 365 had was the striker getting brittle and breaking but that was the very first batch of 365’s before the xl, macro, macro comp or tacops existed and it’s been solved.
@distilledfreedom18404 ай бұрын
Thanks, I went to take a look at the Macro and boy does it feel so much better then the 19. As far as carry goes. @@kevinborish
@marcusjackson27111 ай бұрын
I knew you were a big dude when i saw how you were holding this pistol in your fingers. The TACOPS is relatively large in my hand and you're handling it like I do a standard p365😂
@14KrisDavis3 ай бұрын
The mags just need to be broken in. After a few range trips it's much easier to load the mags and chamber a round
@ron856610 ай бұрын
Not sure why anyone would carry without a round in the chamber.
@InferiorRifles10 ай бұрын
I’m not condoning or recommending it. But people do it, so I felt it was worth mentioning.
@jadenantal16529 ай бұрын
Better than not carrying at all
@GreymanEDC11 ай бұрын
So at $55 a piece retail, getting 4 mags is a huge plus!!
@jbdoingjbstuff10 ай бұрын
yes. and now thru December, Sig will give 3 free mags via rebate on any new P365 purchase.
@TroyHomenchuk3 ай бұрын
Is it actually cut for the EPS Carry though? It looks like there is a plate in there.
@InferiorRifles3 ай бұрын
The plate comes with the EPS carry. You can direct mount it without the plate if you get shorter screws
@user-em4lf9ny8i9 ай бұрын
Any issues with rust that's been talked about?
@InferiorRifles9 ай бұрын
None with mine
@great_deception6 ай бұрын
1 guy made a video about this on youtube and suddenly everyone is talking about P365s rusting. I have 2 of them for years, no rust. It's embarrassing how many people use youTube as their source on firearms.
@Dorito2302 ай бұрын
Of course there are no issues. I doubt there ever was.
@bbmw902911 ай бұрын
Nice review. You should post a range review. One question. Have you tried shooting the gun with a round in the chamber and a full mag (17+1)? With the gun cycle a completely full mag?
@HWG-wm8ld11 ай бұрын
Why would it not
@bbmw902911 ай бұрын
@@HWG-wm8ld The author was talking about how hard it was to rack the slide on a full mag, indicating a lot of slide drag from the fully compressed mag spring. That slide drag could retard slide cycling from the first round.
@ArduousPun11 ай бұрын
I have a P365xl and this is extremely difficult to do with the 12 round mags. I opted in for a magguts +2 conversion and keep one less in the mag if I’m not chambered.
@TheRios701811 ай бұрын
That sig looks like a toy gun with your huge hands! Great video sir!
@brianphelps66614 ай бұрын
Sigs are single action striker fired. Is this why the 320’s are going off?
@Dorito2302 ай бұрын
They AREN’T. A few did-in the beginning-but they haven’t since then, which was many years ago.
@GreymanEDC11 ай бұрын
I can confirm you only get 2 17rnd mags in the Xmacro comp version
@Asidebar10 ай бұрын
You get 4 mags in the Tacops
@chesterbateman175310 ай бұрын
Very good vid. XMACRO IS BOSS
@stewmeat3010 ай бұрын
Question is will the WC grips accept the stock mag flare?
@BulletSpoungАй бұрын
Not me, I would never carry a 365 X-macro over a Glock 19. You can take a 19 out and shoot it until you're out on money without a hiccup. Not so with the Sig, if you got yours to run four boxes of ammo without a glitch you're very lucky. I own a range and have had several people run there mouth on how good they are. Then they bring it over and shoot for three or four hours and go home upset and disappointed. Can't load the mags fully without cussing, slide will not close all the way from time to time, slide needs to be open to insert a fully loaded mag, will not shoot to point of aim and dislikes a lot of hollow point ammo. If you are going to trust a 365 X-macro with your life, make sure you shoot it a lot before you do. Sig needs to go back to making high quality firearms like the p226, 220, 228, 229, older 210s, 550, 551 and PE-57s. Quality you can stake your life on, not crap that just looks cool.
@wildwolf89837 ай бұрын
What holster do you use for this gun? OWB or IWB? Any recommendations?
@InferiorRifles7 ай бұрын
I have both IWB and OWB for different outfits. For IWB I personally like crossbreed or similar style “hybrid” holsters. My OWB is made locally by AAA Concealment. That’s just my personal preference though, it’s important to try out different kinds to find what works for your needs and build.
@TheLiquidss11 ай бұрын
Also Icarus Precision made some great grips for P365
@nelsonhoward50411 ай бұрын
One word outstanding ps been considering one but put off about the mags rusting
@Aa-ron2211 ай бұрын
Mine was stiff like that, too. Finally broken in after 800 rounds or so.
@deplorabledave10483 ай бұрын
Tim at MAC gave up his G19 for a P365
@kawikadavid89589 ай бұрын
I don't think it's a glock killer because it has many issues. If yours don't have issues then you are one of the lucky ones.
@spll390610 ай бұрын
Wish i could make my self like the rest on the sig but for me its a no go.
@MattMacKo9 ай бұрын
It says it's a 1.4in width...is that just because of the flared magwell?
@InferiorRifles9 ай бұрын
Yes. 1.1 inches without the magwell
@JustisGarabrandt-wx2mn7 ай бұрын
Yea it SHOULD be cheap to change the grip frames. That was spose to be the point. But these companies making them are charging $400 for a grip frame… you can buy full guns for 4-$500. So I can’t quite understand why someone would buy a x macro for $800 then spend $400 on a grip frame. Now add a $350 red dot. A trigger, some extra mags, jeez by the time you do this your at a $2000 carry pistol lol… I get the modularity of it and it’s great for certain things when your using basic products. But to buy a $400 grip frame is absurd to me. To each is own tho I guess! Nice video.
@InferiorRifles7 ай бұрын
The $400 grip modules you’re referring to are full CNC aluminum. It’s a complicated part to machine and then has to be anodized or coated in some way. All of which meaning it will be expensive when compared to Sig’s $65 OEM polymer grip modules. People typically add the upgrades you mentioned because they add something that the gun previously lacked, even if that “something” is just a better feel or aesthetics. If you don’t see the value in an upgrade, don’t install it. None of this takes away from the Macro itself being a fantastic carry gun.
@ryanchinh10409 ай бұрын
How many magazines does it come with the case inside?
@Jackson-xr5dg10 ай бұрын
Can you drop a link to the 1/3 sights you got? I have the same set up but I’m hesitant to buy any
@InferiorRifles10 ай бұрын
www.nightfision.com/product/night-fision-optics-ready-stealth-series-for-sig-sauer .289-.287 Height for lower 1/3 cowitness
@fredvStein6 ай бұрын
Which size sights did you order for lower 1/3? 289-287 or 240-238?
@InferiorRifles6 ай бұрын
289-287
@fredvStein6 ай бұрын
@@InferiorRifles Thanks! I like these H3 irons even more than Ameriglow or Trijicon. I would love if you can do a quick video showing how they look infront of and through your optic.
@davidjoseavilagravedeperal91159 ай бұрын
Where can I buy this gun with this eps carry included and how much does it cost?
@InferiorRifles9 ай бұрын
Sig does not currently sell the X Macro with the EPS carry included.
@2aholes40210 ай бұрын
Nice gun. The ND's being reoort by the P320 give me pause.
@tacratt60919 ай бұрын
The 365’s are a totally different animal! I haven’t heard of any ND’s with the 365 series of pistol’s!
@2aholes4029 ай бұрын
@@tacratt6091that's good to know. I have heard the FCG was similar with a couple difference hopefully that is the case
@JaredGrissett11 ай бұрын
Just had a conversation with sig CS earlier today about my brand new p365 that came with 2 Mags that wont reliably function. They said i need to break in the gun/mags with 200-300 rounds to expect any reliability. What are your thoughts on that? I've never had a pistol mag issue outside of 1911s.
@InferiorRifles11 ай бұрын
I haven’t had that experience with my mags personally, but that seems excessive. If all of your mags are having issues then one would think that the pistol itself is the problem, not the mags
@seijiroukikuoka597511 ай бұрын
Disassemble the magazine, diss the spring a couple times, then do some dry cycling. If it happens again, tell the CS people, it's f@#&ed.
@TheArmorersFix11 ай бұрын
@@seijiroukikuoka5975agreed! That’s the very issue I’ve seen from some of these tiny mags with excellent round counts smashed into them.
@TheArmorersFix11 ай бұрын
You can also completely load and unload those new mags 5 times. This has solved that each time I’ve seen. From 365 mags to shield, and even the new beretta 80x cheetah. You should be right back in business!
@JaredGrissett11 ай бұрын
@InferiorRifles it's the mags for sure. The followers are getting stuck. if I eject the mag and tap it to dislodge the follower, it shoots up and gets stuck half way out the top. I'm going to load and unload the mags a bunch of times like the other guy said here to see if that fixes it. Either way, it's wild to me that a modern handgun would have an issue like this and that the companies stance is to "break in" the magazines.
@marcOnline9 ай бұрын
What is the sku of the sights you ordered?
@dangelothompson364910 ай бұрын
Wish the 365 was ambi. Would be awesome
@filoniz10 ай бұрын
What is tacops?
@KalashmanNC2 ай бұрын
Sigs just feel cheap to me. I paid a lot of money for an m18 because “muh Corps” and could not bring myself to love it. Everything about it just felt awful.
@ethanoakley84066 ай бұрын
I just put one on layaway 4 when I turn 21
@pilotmaf700710 ай бұрын
Been seeing several reports of rust due to poor finish. Anyone having the same issues?
@alexfishing479 ай бұрын
My friends has rust but he also never cleans it. So I think that’s the issue
@luisb894210 ай бұрын
Great video . Change the trigger will be better also
@user-iq4wc2rl8vАй бұрын
I still choose my 19 ✌️
@ryanmccullion44928 ай бұрын
10 years ago. No one had a red dot. No one thought much of them. Now it seems EVERYONE has a red dot.
@Citizen2ACitizenLLC5 ай бұрын
great vid Fam,,,,, just subs.
@williamhernandez523310 ай бұрын
Does anyone else have issues with front sights moving after a few mags???
@InferiorRifles10 ай бұрын
I personally have not.
@chrisfekete5236 ай бұрын
I really don’t understand why people bash sig so much when In all reality the amount of times they shoot a year they could have a Taurus g3 an it would be perfectly fine
@patricklawrence94509 ай бұрын
I have been researching this gun for awhile now. I am 6’4. If this gun fits him well at 6’8, I’ll be ok with it. Thank you!
@wildwolf89837 ай бұрын
I don’t get what your height got anything to do with any gun fit?
@InferiorRifles7 ай бұрын
@@wildwolf8983 tall people usually have larger hands. Not a difficult concept lmao
@viktorrosales517811 ай бұрын
I have replace my G32 with it and there is no going back!!!
@dsig77768 ай бұрын
Perfect choice!!!
@user-bu4yi2rs4e10 ай бұрын
What do you mark your red dot screws with?
@InferiorRifles10 ай бұрын
Sharpie paint pen
@oklahomahank237810 ай бұрын
Slimmer grips feel great to me, but I actually shoot the fatter grips better.