Injector Black Death Repair Mercedes Sprinter & E320 CDI OM647 OM648

Рет қаралды 17,959

Күн бұрын

"Black death" is one of the few common issues on the OM647 and OM648 Mercedes turbodiesel engines, but it can be a difficult and costly repair. In this video Corey from IDParts overviews the problem and how to fix it.
IDParts.com is the leading diesel and Sprinter speciality store on the internet! We specialize in assembling great repair & service kits with our own on-the-ground knowledge.
Sprinter OM647 Injector Installation Kits:
www.idparts.com/sprinter-t1n-...
Sprinter OM647 Injecto Parts:
www.idparts.com/advanced_sear...
Mercedes E320 CDI Injector Installation Kits:
www.idparts.com/injector-inst...
Mercedes E320 CDI Fuel Injector Parts:
www.idparts.com/advanced_sear...
www.idparts.com/

Пікірлер: 15

@p.istaker8862 2 ай бұрын

Good video. Good slap base.

@the_retired_mechanic 2 жыл бұрын

alll injector removals are a pain. very time consuming cleaning the job up afterwards and i think a lot of customers don't appreciate the work that goes into this type of repair

@nikkonikko6422 2 жыл бұрын

My man, thanks for at least putting down the torque but I wish you focused also on how you replaced the washer and the seal and not on cleaning! Thanks tho

@leodavis7524 2 жыл бұрын

Good video, but you didn’t show the old seal removal and new seal install… So far so good with my 08 Gl320.

@paulmarado 6 ай бұрын

My T1N1 ran fine until I pulled the bad injector causing Black Death. Reassembled and now it won’t start. I lost prime. Nothing at injectors. I have new injectors to install.

@audreymeschkuleit8352 Жыл бұрын

Got t40 bolt loose but the t40 bolt wont clear past injector body ? So bolt wont come out and therefore injector clamp wont come out? Any tips ease? What gives?

@LatinDanceVideos 2 жыл бұрын

A few videos of injector removal show using oven cleaner to soak and soften the black gunk prior to removal. The shop vac attachment is cool. Need a link

@bartden9668 Жыл бұрын

I read somwhere: brake cleaner does not dissolve this gunk, oven cleaner does but is corrosive to aluminium! Carburretor cleaner or cellulose paint thinners do the job well without fucking up plastic or aluminium parts.

@JIu4Ho 9 ай бұрын

@@bartden9668 It is only safe to use if you are sure it won't affect wires. I have so clean and one injector wiring is covered with this crap :(

@ayubaadamu8403 Жыл бұрын

Sprinter new type

@CITYBORNDESERTBRED 2 жыл бұрын

Dirt Lifestyle brought me here

@nak8327 2 жыл бұрын

#5 OM647 injector removal video request

@Paumonsu Жыл бұрын

Spray pb blaster on the hot engine multiple times before trying to take out the injector. Another trick is turning on the engine with the injector bolt out, the pressure on the chamber will push the injector out some of the times.

@ian2armannduccio 2 жыл бұрын

Omg I have to listen to hold muzak when I call up a government department and have to hang on for half an hour losing my sanity. Why do I also have to hear it when I'm trying to understand what you're saying? Don't you know this kind of thing is distracting and depressing? Really spoiling your message there, please get rid of it. Thank you.