Inside a CZ Shadow 2 - Trigger Explained (revised)

Рет қаралды 5,906

CZ Armorer

Күн бұрын

Пікірлер: 25

@herminigildodelacruzjr1752 59 минут бұрын

Very helpful sir thanks

@TheGentlemanGunner 6 ай бұрын

It’s intelligence and understanding like this is why I have you work on my S2s… I can do it… but I KNOW you can do it better 🔥

@SEAKPhotog 5 ай бұрын

Great info. Thanks! One suggestion that has improved a "gritty" DA on a couple of my CZs (even after polishing all the trigger components) is to polish the edges of the main spring plug, which can be very uneven/rough/sharp. When pulling the trigger in DA, one is compressing the main spring into the plug. If those edges are very rough, it can absolutely be felt. I was pleasantly surprised by the improvement it can make and it's not something I see mentioned very often. Cheers and thanks for your informative videos!

@JoMamasHouse 6 ай бұрын

This is something I’ve always been looking for. Here’s the parts, here’s their function, here’s what they impact with respect to trigger function. Thank you so much!

@czarmorer 6 ай бұрын

I'm glad you liked it!

@ACxREAL 6 ай бұрын

Woo get some! As always great video.

@czarmorer 6 ай бұрын

Thank you! I'm glad you enjoyed it :)

@sen8989 6 ай бұрын

Thank you for the nice video

@czarmorer 6 ай бұрын

glad you liked it!

@eduardogallardo9474 6 ай бұрын

Excellent video! Very infornative and explanatory. I now feel like i finally understand a topic I did not before and what makes CZ triggers better!

@czarmorer 6 ай бұрын

thank you! glad you liked it.

@trevor8087 5 ай бұрын

@@czarmorer @CZArmorer Do you do your gunsmithing out of Texas the reason I ask I because I live in the Dallas Fort Worth area and would like to have you work on my Cz

@czarmorer 5 ай бұрын

@@trevor8087 Yes sir, I live in Keller, TX. Find me in Instagram for us to chat about it (@CZ_ Armorer is my handle in IG)

@trevor8087 5 ай бұрын

@@czarmorer I don't have insta

@jpradasdiez 6 ай бұрын

Nice video!!!

@czarmorer 6 ай бұрын

thank you!

@llend07 4 ай бұрын

Thank you

@czarmorer 4 ай бұрын

You're welcome

@Chabster 6 ай бұрын

Damn, this is great. I wish there was a 3d animation to represent everything in action, but I guess this is a huge chunk of work. Do I understand correctly that conversion to SA is literally achieved by removing the disconnector piece? Even without changing a single other part?

@czarmorer 6 ай бұрын

gotta change the trigger shoe as well. The position of the trigger when resting is different between SA and DA.

@onpsxmember 6 ай бұрын

Extended firing pins, better not drop it then. So far 2-0. Once in Canada, once state side. Good video, I'll check out more.

@Rothbardy 6 ай бұрын

Can you do a detailed video about how the disconnector works? The different parts of it and how it interacts with the trigger bar/sear? Single action vs double action and all. Thank you for the videos!

@czarmorer 6 ай бұрын

was thinking about one fitting an after-market one. I can cover that on the same video then. Stay tuned 😀

@trevor8087 5 ай бұрын

@CZArmorer Do you do your gunsmithing out of Texas the reason I ask I because I live in the Dallas Fort Worth area and would like to have you work on my Cz

@czarmorer 4 ай бұрын

I do - and we've been in contact via email already.