Рет қаралды 1,450
DISCLAIMER:
A “star” next to the product denotes an affiliate link. If you buy from the affiliate store using this link, I may get a small commission on the sale. Thank you for your continued support
This is a comprehensive #DIY video how to install a hidden after-market #dashcam on a #Mercedes #C200 #W203. At the end of this video, I gave this project a #DIYABILITY score so make sure to check that out 👍
This video covers a lot of topics so feel free to use the chapter selections below to skip to the part you like to watch.
🙏 Support my channel: www.buymeacoffee.com/autosngi...
🎥 RELATED VIDEOS:
1) Mercedes C200 Android Headunit Upgrade Guide ( • MERCEDES C200 W203 | A... )
2) Peugeot 307 T7 Dashcam Install Guide ( • PEUGEOT 308 T7 | DASHC... )
🔘 PRODUCTS FEATURED IN THIS VIDEO:
⭐️ Hidden Dashcam (s.click.aliexpress.com/e/_AnKBcx)
⭐️ Micro SD Card 128GB (amzn.to/35XDwfj)
⭐️ T-Tap and Spade Connector Set (amzn.to/3tkr5Tu)
⭐️ Wire Stripper/Crimper Tool (amzn.to/3Rt7H0w)
⭐️ Android Headunit for MB C200K W203
OPTION 1: 8” Screen w/ built-in wired ACP and AA (tidd.ly/3yPeEjz)
OPTION 2: 7” Screen w/ built-in wireless ACP and wired AA (s.click.aliexpress.com/e/_Af3Hfr)
🔘 OTHER RESOURCES:
CAD Mounting Frame Template (with Measurements)
drive.google.com/file/d/1rPRI...
🛠 TOOLS OF THE TRADE:
⭐️ SmallRig Professional Phone Video Rig Kit (ebay.us/fpnulQ)
This is a step up from my old set which was made of poor quality plastic and it kinda needs replacing. This kit is more stable and has loads of attachments. I find the power bank holder very useful especially during those extended recording sessions.
⭐️ RYOBI One+ Rotary Tool (amzn.to/3wbHSd9)
This is my first rotary tool and this is the first time I’m using it in the video. This rotary tool an affordable option especially if you are already in the RYOBI eco-system.
⭐️ Ratchet & Torx 38-pc Set (tidd.ly/3mkoQvI)
A good and inexpensive beginner ratchet set. A must have for any automative DIY’er
⭐️ T8-T40 1/4" Torx Security Bit 150mm (amzn.to/3LWQPvf)
These are long Torx bits useful for reaching those deep/recessed screws
📖 CHAPTERS
00:00 Introduction
01:23 Process Overview (Lecture)
05:26 Cut excess mount frame
10:00 Initial test fitting
10:50 Creating mount points for W203
11:12 Centre and Side Frame measurements
11:50 Attach of the centre frame
13:13 Importance of Centre and Side frames
14:47 Attach the two side frames
15:11 Final fitting (I hope the new mount points work!)
15:42 Route wires
21:05 Use Butt connectors for the dashcam wiring loom
23:15 Attach T-Tap connector on the headunit side (Yellow=12V, Blue=ACC, Black=GND)
24:18 Attach the AUX-IN accessory connector to headhunt
25:31 Hook all the wires up
26:49 Initial connectivity test
28:05 Close it all up
28:21 Sample footages (Day and Night)
29:20 DIY-ability Score (39/50)
29:37 Affordability (10/10)
30:24 Quality (8/10)
32:31 Satisfaction (8/10)
33:43 Fit and Finish (5/10)
34:35 Fun Factor (8/10)