INSTALLING A CULVERT! With Rip Rap Stone Edges

No video

INSTALLING A CULVERT! With Rip Rap Stone Edges - kubota SVL 75

Рет қаралды 31,434

Күн бұрын

this video we install a culvert and driveway entrance for a farm access. This culvert was designed by someone and we followed their requirements. which were a 24 inch diameter culvert and a total of 16 meters long. We then trucked in A gravel to build it up to grade and then topped the sides off with rip rap stones

Пікірлер: 78

@jackvance6025 9 ай бұрын

Very nice job, well done! I do have some observations to share for what it’s worth… 13:57 That is probably the most expensive way of backfilling a culvert i have ever seen in my life due to the use of high quality road base for the entire fill material All of the jobs I’ve done we used unclassified fill material that was compactible for all but the last foot or so. Where I live in California Road base cost about $27 a ton and unclassified fill about 8 dollars a ton so you can save a Lot of money by just capping the job with road base The revetment on the outside is a good idea for sure. It will help your fill stay in place. Sure looks like the engineer specified far more corrugated. Metal pipe than the job needed could’ve saved a ton of money there, too

@dirty.diggers 9 ай бұрын

Yup I don’t disagree with you! We were following the specifications designed by the engineer. That’s the way it was desired to be completed, just happened to be a very deep ditch as well

@dirty.diggers 9 ай бұрын

Thanks for the input and watch though! Much appreciated 👍🏻

@aaronburford5701 5 ай бұрын

Rewatched! Love the Rip rap usage! Great video and content!

@dirty.diggers 5 ай бұрын

Thanks Aaron! You’re the man! Appreciate you 🙌🙌

@aaronburford5701 9 ай бұрын

Great video! Once again rip rap is the best!

@matlandproject 2 жыл бұрын

Hey wanted to let you know I stumbled across you channel when searching culvert installation. Great work! I have have recently started to video my novice use of my kubota excavator. Thanks for posting your video

@dirty.diggers 2 жыл бұрын

Awesome thank you Matthew! Glad you found my channel! Practice improves us all keep it up with your mini! 🍻

@DieselandIron 3 жыл бұрын

Really nice work! Most guys don't bother with the 1x3 or rip rap. Great job not cutting corners and ensuring this stays nice. Really great work Andrew

@dirty.diggers 3 жыл бұрын

Thanks Bryan! Better do the job once, the right way!! 🍻

@DieselandIron 3 жыл бұрын

@@dirty.diggers Oh heck yeah. It's shocking how much of the industry doesn't get that...

@aaronburford5701 Жыл бұрын

Love the Rip Rap being used.... it's rhe best. Great video!

@dirty.diggers Жыл бұрын

Thank you for watching and the feedback! Much appreciated 🤙🍻

@aaronburford5701 Жыл бұрын

@@dirty.diggers love your videos.... learn so much... keep them coming!

@aaronburford5701 Жыл бұрын

Forgot to mention I enjoyed rhe skid steer work... operator is superb!

@dirty.diggers Жыл бұрын

@@aaronburford5701 thank you! That means a lot appreciate it! Hard to get the content out on KZfaq, I try to get these longer videos out as much as possible. Should have one coming out in the next day or so finally! Lol if you have Instagram you can see all the more day to day stuff and quick videos there if you’d like too check that out. 🍻

@dirty.diggers Жыл бұрын

@@aaronburford5701 haha just always trying my best! Thanks man

@dimitrifelton7865 10 ай бұрын

Interesting how you use the dirt toss technique I like to push through toss at the end the back drag came out beautifully great work !

@dirty.diggers 10 ай бұрын

I find flicking it helps already it out. Pushing is good as well. I like a combo of techniques but what matters most is the end product 🤙 thanks for the comment and feedback appreciate it 👌🍻

@anthonycash4609 2 жыл бұрын

Very nice and perfection job you did there. But I was surprised that DOT would approve that small of culvert to be in that large of a ditch.

@dirty.diggers 2 жыл бұрын

Yeah it was very long as well like several meters longer then the driveway width. But it was all designed I just followed the specs.

@rontopping2048 Жыл бұрын

Plenty wide enough machine is 72 inches wide. Looks like 4 to 5 times that width

@angusblack9900 11 ай бұрын

I put quite a few culverts in here in Kansas. We always packed dirt in and capped it off with rock good job😊

@angusblack9900 11 ай бұрын

Very nice

@MrAerocomposites Жыл бұрын

Thank you. A wonderful video.

@dirty.diggers Жыл бұрын

Very much appreciated! Thank you for the compliment and subscribing 👌🍻🍻

@bluesfool1 3 ай бұрын

Looks nice! I like how you flipped the dirt out of the bucket. I’ll have to try that. Does this type of work require you to have any kind of license or anything?

@dirty.diggers 3 ай бұрын

Thanks! Appreciate that. Yeah flicking the dirt or other material like that is a technique that can be helpful to spread material out or sometimes if you can’t raise the bucket to Dump for various reasons. And yes for this job we needed to have a permit for the culvert and also one to have a lane closed on the road when trucks were dumping because it was a very busy road

@WaynesAdventure 5 ай бұрын

Looks good 👍

@dirty.diggers 5 ай бұрын

Thanks 👍

@MarcioMarques7 3 жыл бұрын

Been waiting for this one!!!

@dirty.diggers 3 жыл бұрын

I bet you have!! Lol hopefully you enjoyed it 🤙

@emilyrondinone3819 3 жыл бұрын

Great work!

@johnteelsexcavatingjohnnys7095 3 жыл бұрын

Nice looking job

@dirty.diggers 3 жыл бұрын

Thank you!! Appreciate that 🤙😄

@scruffy6151 3 жыл бұрын

Looking good.

@dirty.diggers 3 жыл бұрын

Thanks Scruffy!! Hope all is well with you 😄

@scruffy6151 3 жыл бұрын

@@dirty.diggers doing good

@dirty.diggers 3 жыл бұрын

@@scruffy6151 glad to hear!

@utahreadiness 2 жыл бұрын

Awesome!

@dirty.diggers 2 жыл бұрын

Thanks man! 🙌🙌🍻🍻

@camillecolombain1926 3 жыл бұрын

Nice job.

@dirty.diggers 3 жыл бұрын

Thanks man appreciate that!! Welcome to the DDG!! 🤙

@camillecolombain1926 3 жыл бұрын

Keep up the work.

@tsh30039 Жыл бұрын

Dirty digger is the Man

@dirty.diggers Жыл бұрын

Thank you! Appreciate that my man 💪🍻🍻

@gibsonlandscapeconstructio7984 3 жыл бұрын

You weren’t kidding about getting that culvert video out😂 Good job Andrew🤙

@dirty.diggers 3 жыл бұрын

I had it uploaded just not published lol it was set to come out yesterday 😅 that why I laughed when I saw you doing a similar project lol

@gibsonlandscapeconstructio7984 3 жыл бұрын

@@dirty.diggers 👍i enjoy projects like that🤙 Did you have to get permits for that culvert job??

@dirty.diggers 3 жыл бұрын

Yeah the land owner got a permit for the entrance and I needed on for a temporary road occupancy

@camillecolombain1926 3 жыл бұрын

beautiful

@Thisandthatdude Жыл бұрын

That’s how you run a skiddy

@dirty.diggers Жыл бұрын

Thank you man! Appreciate the feedback 🤙🤙🍻🍻

@ConstructionMachineryChannel 3 жыл бұрын

Nice job guys 👍🏻

@dirty.diggers 3 жыл бұрын

Thanks man!! Really appreciate that 😄

@ConstructionMachineryChannel 3 жыл бұрын

@@dirty.diggers No problem

@danieljboissevain Жыл бұрын

Hey Andrew, what's your thoughts on the SVL 75 Skiddy ? I'm in process of buying the new 75-3 series and wondered if you have any thoughts on the upgrades Kubota did to your model on the 75-3 - Any feedback gratefully appreciated my friend :)

@dirty.diggers Жыл бұрын

Hey Daniel! I am a huge fan of the Kubota machines in general like the mini excavators and skid steers. However to be totally honest I have not tried out a 75-3 yet. They look nice, I’ve heard the cab is better and supposedly a better venting system from the 75-2 which is one of the biggest cons that machine has. I would love to tell you more about it but I would have to run it for a while before I can give an honest assessment. Sorry I know not to helpful but in general kubota has been great equipment to own and operate 🍻

@rubes1688 Жыл бұрын

Interesting technique the way you toss the dirt forward and quickly back up. What is the purpose?

@dirty.diggers Жыл бұрын

Just how I add a little more where I notice I need to. Also a way to shift a bit more material to one side if I need more there etc

@gabrielpearson 3 ай бұрын

Forgive my ignorance, but what’s the deal on all the extra culvert on either side?

@dirty.diggers 3 ай бұрын

Haha not ignorant man, I thought the same thing! This was designed by an engineer and the town. I had to follow their requirements for culvert length. Wasn’t up to me lol.

@gabrielpearson 3 ай бұрын

@@dirty.diggers not meant as a criticism, just to be clear. I figured there was a good reason, and I’m sure the engineer had one.

@dirty.diggers 3 ай бұрын

@@gabrielpearson Yeah Exactly! If it’s an approved design and what the customer wants, as long as it doesn’t negatively affect us or anything else negatively, I have no problem doing it 👍🏻

@johnferreira174 14 күн бұрын

Cost for project?

@mattgregor7541 3 жыл бұрын

Curious to understand why u chose to swap buckets for the rip wrap? Was it visibility?

@dirty.diggers 3 жыл бұрын

Great question! The main reason was to avoid also scooping up the gravel I just spread on the driveway. That way I could grab the bigger stones and the gravel would fall through the bucket openings

@rontopping2048 Жыл бұрын

Easier to pickup RIP rap with tines no cutting edge. Also if he goes down to far it wont mix 2 materials together

@bho6328 Жыл бұрын

Why would you use those metal culverts the only going to last about 10 to 15 years

@dirty.diggers Жыл бұрын

I used whatever the engineer specs required including diameter, length and type of culvert. Wasn’t up to me

@bho6328 Жыл бұрын

Metal culvert are the stupidest thing I've ever seen when they fail and collapse nobody dig them up and fixes them they just put more dirt on it and then everything is backed up and flooded they should be outlawed

@irafair3015 Жыл бұрын

@@bho6328 That is exactly what happened to a culvert in front of my house I just bought and now water backs up to my foundation.