Hi sir,this is Can,my cousin delivered the material I bought from you to me in France. Thank you for your patience and support..
@GWayne-dk3cn18 күн бұрын
You're really selling me on the bracket I saw on your last video of inexpensive top cases! I need to get the passenger seat with the flip-up backrest for the wife AND I want a lockable top case behind her seat. Another VERY HELPFUL and well done video! Thanks!
@kirwinprovidence322518 күн бұрын
Hahaha. Thanks for watching the video. Listen..also check eBAY and Walmart and Target for the top case. 48L size usually holds 2 helmets. Amazon has been selling out of the less expensive ones...which in my opinion works just fine. Be well!
@williammason3503 ай бұрын
This rack Rocks, great fit, fast shipping, anyone that rides a Ryker this is a must have!!!
@tonyvanover22532 жыл бұрын
nicely done. If this were available before my ultimate seat was done I would have went this route for sure
@kirwinprovidence32252 жыл бұрын
Thanks. And thanks for watching the video.
@Daniel_Size_12 Жыл бұрын
Great video. I'll be saving up so I can get one! Dan from Florida
@marekwiderynski45682 жыл бұрын
Super fast shipping. Easy installation. Great product. Thank you so much!!!!
@kirwinprovidence32252 жыл бұрын
Glad Everything worked out. Please text a picture of it installed on your bike to my companies phone number found on the installation package. Be well have a safe summer.
@marekwiderynski45682 жыл бұрын
Absolutely. I'll send pics today
@vincenttan99192 ай бұрын
Excellent product and workmanship! Phenomenal packaging and printed colour instructions! However, didn't work well for my use case. I have a SHAD SH50 top case which is perhaps somewhat larger and heavier than for what this rack is intended. Since the fulcrum is set fairly far back (at the hinge point of the passenger seat) it results in a "diving board" effect with the top case bouncing significantly over bumps, even small ones. I unfortunately decided to remove mine and replace with a different, more rigid but also higher profile rack.
@pashnit2 жыл бұрын
Got mine yesterday and got it and the luggage installed. Even this inept dude got it done!
@kirwinprovidence32252 жыл бұрын
Hahaha… I’m glad it all turned out well. But seriously, I designed that rack so that everyone (no matter their skill level) Can install it without any problems. Enjoy, and thanks for watching the videos and buying the luggage rack.
@heatherormamd9472 Жыл бұрын
I just ordered this for my ryker with the folding back rest. I'm so excited to have this to fit a tail bag, to be out of the way of the use of seat and leg clearance getting on and off my ryker, due to I'm on the short side. This seems to be the perfect thing to accomplish having storage and keep the seat accessible and my getting on and off ryker with storage farther back. Back!!
@heatherormamd9472 Жыл бұрын
This keeps any storage system u chose with this luggage rack and still have the comfort back seat still be usable. I'm soo excited and this seems to be the perfect thing to solve my storage issue with my ryker
@kirwinprovidence3225 Жыл бұрын
Please check your email associated with your order. Thanks
@VinCode172 жыл бұрын
That was actually pretty cool my man.
@kirwinprovidence32252 жыл бұрын
Thanks…appreciate it
@carlosmriverajr22 жыл бұрын
The only inconvenience that I experienced with it was that when I was trying to remove the passenger seat, the support plate was hitting the max mount. I had to remove all the hardware, remove the luggage bracket then remove the passenger seat so I can run some wire underneath the seat and max mount, but besides all that I love the bracket.
@kirwinprovidence32252 жыл бұрын
Thanks Carlos. Be safe and enjoy the riding season.
@cloversproutsandsunshine3594 Жыл бұрын
Hi, what’s the name of the tank box that you installed on your rack? I wanted to buy the same one that you did after I purchase and install your rack. Thanks
@julesat26372 жыл бұрын
Hola, se puede comprar en línea? No funciona el enlace. Amazon ? Saludos
@moelareau46202 жыл бұрын
It looks like a nice rack but the one big flaw is that someone can push that button up on your seat and take off with everything. Unless there is a bolt that I didn't see in the video that keeps someone from doing that.
@kirwinprovidence32252 жыл бұрын
There is no flaw as mentioned . In order to remove the assembly you have to remove the two bolts from underneath the rack. Before you can remove those bolts you still need to remove the bolts holding the mudflap in place. Once my rack is installed it actually protects your seat from being stolen.
@moelareau46202 жыл бұрын
@@kirwinprovidence3225 Do you mean those 2 bolts that you replace underneath, because I watched your video a few times and I don't see them going through the max mount to make it secure. I not trying to be difficult, I just don't want to purchase something for $180 that can't be refunded if it does secure. The mud flap does not secure into the seat only into the mount.
@jhun940152 жыл бұрын
Where can I buy that special plate? Very nice video. Thx
@kirwinprovidence32252 жыл бұрын
Thanks…see link below providence-spyder-accessories.com/apps/webstore/products/show/8244529?siteId=124839377&locale=en-US
@garyrivers63092 жыл бұрын
I'm Ready to order or pre order. I definitely need it.
@kirwinprovidence32252 жыл бұрын
This link should take you to the order page. Let me know if any problems...www.providence-spyder-accessories.com/apps/webstore/products/show/8244529?siteId=124839377&locale=en-US
@garyrivers63092 жыл бұрын
@@kirwinprovidence3225 ordered I have the comfort seat . Can't wait.
@kirwinprovidence32252 жыл бұрын
@@garyrivers6309 We have your order. The luggage rack will ship this weekend. Thanks
@jimwest8902Ай бұрын
We have the standard BRP seat and backrest…does this bracket work with the non-comfort seat? Also, what specific storage box is that? TIA!
@kirwinprovidence322527 күн бұрын
It works with any Can-Am seat. You just need the folding back rest. The short (non-folding back rest) is made with plastic so the short back rest will NOT work.
@dawndarling8588 Жыл бұрын
Found the video i was looking for. Will my ryker cover still fit over the 2 helmet box?
@kirwinprovidence3225 Жыл бұрын
Hi there…that’s a tough question. I would guess maybe, but keep in mind that helmet boxes are waterproof. Thanks for watching the video.
@RykerBuff900 Жыл бұрын
hey do we have to buy the special plate from you or does it comes with the rack
@kirwinprovidence3225 Жыл бұрын
It is included in the kit at no extra charge.
@rustyboy4611 ай бұрын
So been looking at these Ryker 900's seems the Rally is the way to go in my opinion. Would you take a Ryker on a 1000 mile round trip ? They don't seem to move to quickly as far as selling. This concerns me?
@kirwinprovidence322511 ай бұрын
It’s actually a great bike. The Can-Am products are very reliable also. I’ve been with Can-Am products since 2007 with their ATVs and started my business in 2011 with their motorcycles. I have no complaints. However… Ryker is not designed as a cruising bike. It was purposely designed to be a local run-about. It has a small gas tank and on 1000 mile road trip in my opinion it would be extremely uncomfortable… It has a lot of wind buffering and helmet noise because of all of that wind. But that’s just my opinion. We do mostly local road trips now and trailer the bikes for longer distances. Good luck with what you decide. Thanks for watching the video
@rustyboy4610 ай бұрын
@@kirwinprovidence3225 thanks for the reply, yes i stopped by this weekend at a Can Am dealer he pretty much said the same. So typically I trailer my Honda ST1300 from Florida to North Carolina area and ride the mountains. I like AC and riding 600 miles even one way on a bike sucks in my opinion. So the Ryker should handle pretty well throughout the curves of the area I assume the gas tank size is not to bad 5.3 US gal vs my Honda is like 7.4 US gal Looked at the Spyder just way to big and to much money for a toy. Rode my friends and didn't really care for it. Think I will test drive a Ryker during Biketoberfest then make my decision.
@chinomedic2 жыл бұрын
Where do I find the comfort seat. I would like the luggage bracket aswell. Ty.
@kirwinprovidence32252 жыл бұрын
Luggage rack works with Can-Am passenger seat or Can-Am Comfort Seat. Both are from Can a.m. You also need the Can-Am fold and back rest. Once you have that you can get the luggage rack from this link providence-spyder-accessories.com/apps/webstore/products/show/8244529?siteId=124839377&locale=en-US
@cynyc22 жыл бұрын
Will it work with factory Yamaha top cases made for the FJR?
@kirwinprovidence32252 жыл бұрын
This is a flat rack so almost anything will Mount. It is designed so you can drill custom holes to most various cases. Metal is stainless steel so it won’t rusts on you
@tomwenzel9460 Жыл бұрын
Where you buy the rack and dose it come with that plate
@kirwinprovidence3225 Жыл бұрын
Use this link to buy rack. The plate comes with whatever helmet case you buy providence-spyder-accessories.com/apps/webstore/products/show/8244529?siteId=124839377&locale=en-US
@jamesbanks283 Жыл бұрын
Hi I am interested in the luggage rack but I am concerned about the differences between the two I want to buy the coney luggage but would I have to drill hole to make it fit??
@kirwinprovidence3225 Жыл бұрын
We have added four more predrilled holes. I cannot guarantee that your specific model luggage box will fit, but if you have to drill it is easy enough with a quality drill bit. Here’s the link to the luggage rack…www.providence-spyder-accessories.com/apps/webstore/products/show/8244529?siteId=124839377&locale=en-US
@randycosta10277 ай бұрын
Where did you get the luggage rack kit sir?
@kirwinprovidence32257 ай бұрын
Let me know if the link does not work. www.providence-spyder-accessories.com/product-page/ryker-water-bottle-holder
@mandyedwards5666 Жыл бұрын
Where did you get rack from.? Is it custom made?
@kirwinprovidence3225 Жыл бұрын
You can buy it here www.providence-spyder-accessories.com/apps/webstore/products/show/8244529?siteId=124839377&locale=en-US
@grampsaggyballs2 жыл бұрын
I preordered this luggage kit when you first came out with it. Does mine have the special plate you made for the comfort seat? I haven't installed it yet because my bike is still in the shop.
@kirwinprovidence32252 жыл бұрын
No. As advertised a few months ago, the first batch was for the regular seat. This version is new.
@grampsaggyballs2 жыл бұрын
@Kirwin Providence so the one I have won't work with the comfort seat? When I pre-ordered, you just specified that you must have the backrest. Did not say anything about what seat you had.
@kirwinprovidence32252 жыл бұрын
@@grampsaggyballs Do you have a comfort seat?
@kirwinprovidence32252 жыл бұрын
Feel free to contact me via email
@carlosmriverajr22 жыл бұрын
I did purchased the same kit plate from the first video you did but my didn't come with that special bracket is there any way how to get this plate sent to me? Carlos M Rivera
@ShockwaveTXB2 жыл бұрын
I have the Ultimate Seat, which doesn't have the folded backrest. Wish there was a solution for this.
@kirwinprovidence32252 жыл бұрын
Unfortunately not. And all other options when mounted will hit the back tire. Unfortunately this is the only way to mount safely and not have issues with that back tire. Good luck…
@ShockwaveTXB2 жыл бұрын
@@kirwinprovidence3225 thanks for the info. I had wondered if similarly to how you have the added support of the bolts in the passenger fold down backrest, using the bolts (2 per side) on the Ultimate Seat where the grab handles might serve a similar purpose to allow it to work.
@kirwinprovidence32252 жыл бұрын
@@ShockwaveTXB Intriguing… Unfortunately I cannot speak to the mechanics of how that would work. You may just have to fool around with it.
@tonyvanover22532 жыл бұрын
The sling mods 2 up luggage rack can be made to work with the ultimate seat and the amazon luggage with some work
@daisygallop547Ай бұрын
Will this mount to an aftermarket backrest??
@kirwinprovidence3225Ай бұрын
It was designed to mount to aftermarket luggage cases only.
@granrappanotyouraveragemoe2682 Жыл бұрын
2023: did make a model that will fit without the backrest? #granrappa❤️
@kirwinprovidence3225 Жыл бұрын
No because There is no safe attachment point without the back rest. That’s why all out of models on the market slam against your back tire when you hit a pothole. The back rest is needed to avoid slamming against your back tire and have a safe attachment point. Thanks…
@granrappanotyouraveragemoe2682 Жыл бұрын
Thx for the clear knowledge ❤️
@richardlee44384 ай бұрын
Cool mod - are you fabricating the mount yourself? Are you in RI?
@kirwinprovidence32254 ай бұрын
We fabricate in Upstate NY.
@richardlee443817 күн бұрын
@@kirwinprovidence3225 Will I still be able to remove the backseat?
@kirwinprovidence322516 күн бұрын
@@richardlee4438 4 bolts hold the rack in place. Removing the 2 bolts at the bottom will allow the rack to swivel up. You can then remove the seat. Thanks for watching the video.
@daontetrotter12 жыл бұрын
The website not letting me a the rack to my cart so I can pay for it
@kirwinprovidence32252 жыл бұрын
Looks like you’re all set now. I see your order
@evelynsmith791614 күн бұрын
Hello do you have a luggage rack for the Spyder F3S....
@kirwinprovidence322513 күн бұрын
Sorry no. Only for the Ryker. Be well.
@Todd102602 жыл бұрын
Hello, I placed an order awhile back and you were out of stock and said they would ship July 25th. I have sent you 2 emails that you have not responded to. Please tell me when they will ship
@kirwinprovidence32252 жыл бұрын
Yes. Items ship the week of the 25th not the 25 (sorry for any confusion). We are packaging items now. You are on of the first in the backorder, so This order ships 7/29. Thank you.
They are back in stock. providence-spyder-accessories.com/apps/webstore/products/show/8244529?siteId=124839377&locale=en-US
@gcardona742 жыл бұрын
Where can I also buy the passenger’s seat?
@kirwinprovidence32252 жыл бұрын
You get the seat from Can am
@pamelalalmond83225 ай бұрын
Do you sell the converter plate that you made?
@kirwinprovidence32255 ай бұрын
It’s included in the Luggage Rack kit www.providence-spyder-accessories.com/product-page/ryker-luggage-rack
@kirwinprovidence32255 ай бұрын
If you already have our firt version on the Luggage Rack before we made the converter plate then I can send you the nut replacement converter plate for free
@Todd102602 жыл бұрын
Does the custom plate come with the order or is that separate?
@kirwinprovidence32252 жыл бұрын
If you’re talking about the plate that replaces the two nuts, then yes that is all included with the luggage rack.
@Todd102602 жыл бұрын
@@kirwinprovidence3225 placed my order today! Thank you!
@rodneyevans78832 жыл бұрын
Where can I buy 1.. the link is not working
@kirwinprovidence32252 жыл бұрын
Let me know if this link does not work and we will get you a Phone order providence-spyder-accessories.com/apps/webstore/products/show/8244529?siteId=124839377&locale=en-US
@Raynor88Ай бұрын
1:00 Does the "special plate" come with it? What's the weight capacity?
@kirwinprovidence3225Ай бұрын
Yes…everything is in the kit. Weight is 20 pounds
@Raynor88Ай бұрын
@@kirwinprovidence3225 I meant how much can the rack hold? Could I put 100lbs on it? I plan on going cross country next year and I'll need something that can hold all my gear.
@kirwinprovidence3225Ай бұрын
@@Raynor88 Sorry..no rack for the Ryker can hold that amount of weight. The last I checked the Ryker can not even tow a trailer. The racks are meant to handle a few items and keep them locked up safe in a luggage box.
@romualdodagal86862 жыл бұрын
How much is the bracket?
@kirwinprovidence32252 жыл бұрын
This link will take you to the Web store. Let me know if you have any problems with the link.providence-spyder-accessories.com/apps/webstore/products/show/8244529?siteId=124839377&locale=en-US
@SteveAllen-gc1hw Жыл бұрын
Where do I purchase a rack from
@kirwinprovidence3225 Жыл бұрын
Use this link www.providence-spyder-accessories.com/apps/webstore/products/show/8244529?siteId=124839377&locale=en-US
@kennetheggleston40132 жыл бұрын
Can someone share the link to the adaptor please for the seat thanks
@kirwinprovidence32252 жыл бұрын
I assume you mean the web store for the luggage rack. If yes, then here is the link. See the second for a video that shows you the $80 Amazon helmet case that works with the luggage rack providence-spyder-accessories.com/apps/webstore/products/show/8244529?siteId=124839377&locale=en-US
@kirwinprovidence32252 жыл бұрын
Here’s the link for the $80 case video kzfaq.info/get/bejne/ab2BiZVk0p2-lqs.html
@kennetheggleston40132 жыл бұрын
I need the luggage rack plate
@elliottlyles3859 Жыл бұрын
How to order the rack
@kirwinprovidence3225 Жыл бұрын
Several in stock now www.providence-spyder-accessories.com/apps/webstore/products/show/8244529?siteId=124839377&locale=en-US
@marekwiderynski45682 жыл бұрын
Where can I buy luggage for this rack?
@kirwinprovidence32252 жыл бұрын
The good this about this rack is you can buy luggage from Anywhere! See this video for how I installed an $80 luggage from Amazon. The link to the the specific luggage is in the video description. kzfaq.info/get/bejne/ab2BiZVk0p2-lqs.html
@marekwiderynski45682 жыл бұрын
Thank you so much!!!
@kirwinprovidence32252 жыл бұрын
@@marekwiderynski4568 Thanks for your purchase. Please check your email for tracking info and other details. We just shipped your product via Priority mail. You should get it soon.