Let me tell you all , who needs Disney , Netflix , amazon prime , ect : when we have Kyle and Greg of RR buildings . you need your own show. all the best from Turkey... 😀👍🏽👊🏽

I've learned more from your videos then 12 years of school. Smartest builder I've ever seen I appreciate the videos brother

Hey there Kyle: As someone who grew up using a grandfather’s and great-grandfather’s tools, you’ve been so much help to me on what’s new and good in the modern era (including your recommendation on the Cyrusher Montta, resulting in me getting THE last one available in the US for my wife, while I had to get the similar XF-800) that I thought I would return the favor. I watched some of these all at once, so can’t remember which one had you messing with your broken tape measure, but I was using a Milwaukee that had been a gift until I happened to walk past a display in Lowe’s and saw a Craftsman that looked like it, but said MADE IN USA on it. I bought the 30’ version, took it home, and extended it out more than 12 feet horizontally!! (They advertise 14’ and it will probably do that.). It’s Craftsman 30’ x 1 1/4” model CMHT37570. Best one I’ve ever had, so I immediately bought another. Very comfortable to use. If you get one, I’m sure you’ll love it!

Just want to say this is by far my favorite show on the planet. Love that we get to watch yall build!!!!

Telegraph! Same grammatical use as working with flooring. When you lay down some types of flooring you add an underlayment (solids or liquids) to prevent any defects or designs from a previous floor from telegraphing through to the new finished floor. This is a great build series guys and I know you knew that but wanted the interaction from the comments. Nice job.

This roof looks amazing. Makes me want one just like it. Days later... Finds out retail cost in Massachusetts... Throws up in mouth. lol Nice work none-the-less.

Kyle and Greg you both work so professionally all the time.

I think you are the first carpenter I've seen that can do a good job running flashing. Former roofing contractor.

Ghosting is the term that gets my vote!

Are you kidding me???? It looks GREAT!!!

You’re the kind of builder I want to be! Not be the one who is under time pressure, has to work overtime, without much pride in the work. But I guess a second income is a key to being able to do something like this. (apart from this, since this is your own shop)

I've learned a lot watching this series, thank you

I always say that things will telegraph through, like a nail sticking up under a vinyl floor plank

Yea kyle youve taught me an incredible amount over the past year and a half and i thank you!

Awesome detailing! Kyle, I think the word you were looking for was "telegraphing."

i don't do this for a living nor will i probaly ever have a building this size or quality but thats not the point to me. I watch this channel to learn things, watch people be passionate about their profession, and to be brutally honest it is just very entertaining to me. First off you guys are hilarious together and secondly Kyle you are a fricken magician with the snips and metal work. I really enjoy watching you take your square put it here and make, come out an inch here, put a 45 on it, make there, snip, snip, cut out fold/bend and crimp. bingo bango you have an amazing corner detail that also sheds water. keep it up fellas

I love the black facia and trims, it looks great. 🤘🤘

Totally love your attention to detail.

I agree with telegraph in the comment below. I work in industrial paints and we use that term a lot. If you have a defect in the base layer, it telegraphs through other coats and grows on you.

Kyle, you need a Malco 6” hand seamer for the wider bends. Crisp and clean results knowing the hand seamer spans the entire length.

PROUD. The word you were looking for

Kyle, you're crushing this build and your oral commentary to the awesome craftsmanship makes it entertaining, while learning. That's masterful.

Gregs poor face...😂 FYI, this structure looks GREAT!

*does some of the most beautiful metal trim work I’ve seen* “yea… I think it’s good enough..”

Union tin knocker here, for the snips like u said never completely close your snips or youll get fish hooks and turn your snips upside down for the best cut!

It looks amazing. I thought a house with a metal roof and after watching you for years all I see is how my roof was done without the RR love and care.

I appreciate your attention to the details vs. speed to finish. Well done.

It telegraphs thru. Thats the word you were looking for.

You are very crafty with those snips. Id surely mess something up lol. Roof is looking great and the detail u guys do is 2nd to none.

You guys are awesome , as a manufacture I often wondered on the last video why you did not put the gable cleat on before the roof panels - where all of your cleat nails would have been covered by the panels - instead of tacking them into the face of that nice fascia board. I understand that your cleat screws will never be seen . Also do you think snap Z should sell solid Z pre cut for the guys ordering 10’ length’s and cutting them on site. After watching this video I did answer my own question. You were struggling on fitment . If you nailed it on the roof under the panel it would give you more flex for the fascia trim over nailing the face and having. 0 play on adjusting to the solid placed Z bar on the roof side I also don’t ever comment so when I do I Maxwell vent a bit . I know those snips are “good enough for the girls you go with” For your precise cutting and snipping like I do WHY don’t you invest in Malco M2006,2007 snips that are precision made and throw those other reds and greens into the community donation box I did notice you were using Malco’s 6” seamer’s they only recommend for 28 gauge if you pre bent the ridge before installing you would get a perfect 90 rather then beating it after with a beautiful Stiletto From the guy that cares …

The term you are looking for with your screw heads sticking up vs your flat head nails is….”stands proud”. As in….’if we use screws it will cause the surface to stand proud where every screw is located’

The great thing about this channel is not only they do great work but Kyle’s ability to talk and work at the same time and how will he explain the process bravo 👏

artists at work 💎🙏👍🇹🇹

I went out and got a pair of crimpers and a roll of stick Velcro. Get the soft side of the Velcro and stick it to the inside of your crimpers and it makes it where it greatly reduces scratches.

The roof looks super great. Need to the porch down first.

Loving this project! Awesome detail!

FIFTY episodes?!?! 🤯🤯🤯 lovin it

Seems complicated but ends of looking good!! Good job Kyle & Greg.

Great craftsmanship! And you guys enjoy your work and each other!

That trim looks really really good, great job guys!!!!!!!

I am building a dream workshop too right now!

Amazing work as always guys. 👍👍🏴󠁧󠁢󠁥󠁮󠁧󠁿🏴󠁧󠁢󠁥󠁮󠁧󠁿

Printing? Seems like appropriate term for what you would call a fastener that shows through your metal trim or roofing.

Love the precision!

Looks outstanding. Going to be a real nice building.

Looks great!

Excellent job as always. I'm learning a lot.

Maybe the word you’re looking for is “telegraph”? Nice roof!

A great looking roof and detail.

You have done a super excellent job 👍🏻

You guys are doing a great job!

Love your detailed work!

It's looking amazing guys! Love the color you choose! I got my garage doors installed and I'm still working on all the inside wiring. So much to do, there just isn't enough time in the day to get everything done! Take care and don't work too hard.

Good afternoon Great weekend 👍✌️🙏🙏

Looks great guys! Good work shows and will last longer for sure!

A little magnetic torpedo level works well for making the the gable trims level. If you're screwing the top it will suck it down a bit so adjust for that.

Your roof is awesome!

Your new RR HQ is looking good, Kyle.

Kyle, While the craftsmanship is your typical fare and the "no fastener" installation is stunning, the tiny finishing details will still be , as I used to say on some of my builds, 'Oblivious to Napoleon riding by out on the road on his flaming red horse". 😀

You just keep raising the bar.

Looks amazing great content

You can always use a crescent wrench adjustable wrench for them little bends

Amazing and perfektly.

When are you going to start on the inside of the building? Waiting for some interior tips!

Keep Going .

Hi guys love the channel. Do you think about adding solar panels for electricity?

Be thankful it was black and not white I'm still trying to hide lines better

Also, get yourself a 12" barfold it has a 1" bend on 1 side and a 1/2" bend on the other. You'll thank me later the seamers work but a barfold way more consistent and cleaner

I believe the word you were looking for just after four minutes is "proud".

We always used the term 'reveal' .

Super Jungs

Kyle do you have a link to those Makita gloves? 😁👍🏼😁👍🏼

Do you guys use the grk rss screws. If so what length?

The nails will telegraph out though the metal strip.

What brand name is the blue handled small benders are you guys using?

Wow, thats quite a bit of time on the one rake trim.

Transfer or project are the words you are looking for.

1st!! Straight as eggs.

🔥

have you ever used Tek lath screws? very low profile head

Broadcast!

Lads 3:50 screw heads shine through on flashing, down under we say they stand out like dog balls

How does that roof sheet expand when you have just fixed it with all of those screws😳🤷🏼‍♂️

Why did you use a different rake trim than other builds? I've seen you use a trim that went directly to the 1" bend up without the Z-bar.

👍👍👍👍👍💯

The word i use it transfers through. I say flashes through if it's paint.

This a beautiful job ……. But I would love to know what Kyle would charge someone to do this roof to this level of detail. It seems like it has taken a lot of labor to achieve the finished product. I doubt very much there are very many contractors out there doing this level of workmanship with this product. I would love to hear anyone else thoughts on this. I love the work that Kyle and Greg do but I think I would be very frustrated if I hired anyone else to do a building like this and did not get the job these guys do. I would probably be fighting with the contractor and telling him to watch these videos. Then they would tell me they want to charge 30 to 40% more.

Lapped your Z bar backwards fellas.

Somebody paid attention in geometry class.

Not a fan of the end detail on the Rake. I think just simply boxing off the end would look cleaner. Rather than having it stair step nice work though. That trim work is on point

👍✌

The word is broadcasting

Transfers through

'telegraphing' is the synonym I think you're looking for...

Protruding

DINTED.. simplify. Or dimpled..lol

Shimmers

I'm old Greg.... Have you ever drank Bailey's out of a shoe?

Telegraph is the word you are looking for lol

A rivet is a fastener too.