No video
Installing PERRIN (front) solid end links | 2017 WRX
Рет қаралды 497
Күн бұрынIn this video, I show how I installed PERRIN solid end links onto my BLOX 26mm front stabilizer (sway bar). These definitely add more control. Look for my video with the camera mounted under the car, documenting the suspension in action. It's pretty cool!
Thanks for stopping by! Stay tuned.
Music by: www.bensound.com
@20VA Жыл бұрын
what I hate the most about the 2015 - 2021 wrx ( non STi ) is unlike the rear ... the FRONT stabilizer bar does not perfectly square up with the end link ... it is more like a 45° angle ... at FULL LOAD end links should be straight up and down and the hardware should be perfectly perpendicular to the end link squaring off the connection between the subframe and suspension ... you would think AFTER MARKET companies would actually CORRECT this issue with THEIR stabilizer bars however all they do is just make them THICKER but with the factory design ... makes ZERO sense whatsoever ... I mean has ANYONE designed a CORRECTED stabilizer bar for the 2015 - 2021 wrx ( NON STi ) ???
@carvin7lust Жыл бұрын
my thoughts exactly! I have the whiteline front sway bar on my 2021 wrx and the whiteline endlinks failed after 8 months because the angle was too great. I installed them while the wheels were under load too (not like this guy who did without a load). I just installed the perrin endlinks and with coilovers at a 1 inch down the angle on the top bolt on the endlink(under load) is over 45 degrees. The blox swaybar here looks better and I am thinking of getting it because it is just a matter of time before the bushings blow out and fail on the perrin. Who makes good stuff that works!???
@20VA Жыл бұрын
@@carvin7lust ... EXACTLY
@20VA Жыл бұрын
@@carvin7lust ... mind you ... front end if lifted ... load is OFF suspension ... it appears square but at full load it would still have that angle ... trust
MoJo Ninja Garage
Рет қаралды 1,7 М.