Thank you so much! I’ve been installing this thing for 3 weeks with no luck. You video shows the 2 steps I was missing!

Found you from the Harbor Freight sprayer review. Anyone who loves Tacomas...I have to subscribe. I'm on my fourth Tacoma. Keep us updated if you have any maintenance problems with the mini split. Great explanation on how to install it.

What a fantastic video! Unboxing,installation, and review well done ✔

For someone that does not know much about home ac installation, you did a fantastic job on it. Super video and I appreciate it and will be buying this same 220v unit for my 1200 sq ft shop.

Excellent video. Thank you for sharing it. I am going to purchase an 18,000 BTU Confortotal unit in the morning for a cabin.

$ years ago, I bought a Comfortotal 18,000 BUT, and a month later another brand 9,000 BTU. The Comfortotal is running like new, the other one is being replaced next week, when it gets here. The other brand has a messed up circuit board, and since the seller was not registered with the manufacturer, the will not warrent repairs. The board costs just over half what I paid for the unit. After replacing my old central AC, my electric bill went down by about 43%.

i got 2 of these and have had 0 issues with them. Ive had them for over a year already. my electric bill hasnt really been affected and we havent turned these units off at all. Ive just turned them off to clean filters

I just installed mine last week it works perfect I didn’t have to hire a hvac technician I did it my self 😊😊

You sure make it look easy to install.

Whoa. That's really great.

For anyone who has the older units that displays only in celsius. You can order a new remote from the company in Texas and the new remote will display in Fahrenheit, but only on the remote and not the display on wall unit. It makes the conversion automatically between the remote and the wall unit. Again, It does not change the display on the wall unit. But at least you can look at the remote to see what conversion it is. It works perfectly. I ordered a replacement remote and found this out, all the other functions work the same as well on the remote. Hope this helps others.

Great review!!

We have five of these. Two were tripping the arc/ground fault breakers so we swapped them for regular breakers and no more tripping. But one of them is throwing an E3 error code. Manual says to replace pcb and we did but same result. Tech support has been ok, sent wrong pcb first try…will be calling monday for additional support.

Great video !!! Thank you sir

just a heads up you will need to reflare copper tube ends and use nyloc so it seals otherwise it will leak :-( mine came precharged. good job! :-)

What's the SEER rating for this unit?

It seems you answered almost every question except one of the most important ones. What is the SEER rating for this unit?

One of the best mini split install videos I’ve watched, great job. I’m going to order this for my shop, was wondering is the plug on this 220 model 3 prong or 4? I already have a 10-2 wire ran for unit but if it’s a 4 prong 220 then I’m going to have to order the lass efficient 110 12000 btu model so I can use my existing wire. Thank u

Thank you so much for your video, it was super helpful! We just installed this unit and the heat function doesn't seem to be working out blowing warm air. It's the middle of winter and cold so we don't have a need for the air conditioner function yet. Any suggestions on trouble shooting the heater?

Getting this same exact unit installed Thursday

Good job sir.

1st of all great great video I'm so glad that I ran across this video. I have a question, I'm looking for something similar to this or maybe this exact unit for my 10 by 20 Shed I live in Michigan and we get pretty cold winters. Do you think this unit by itself would be sufficient enough h to really heat up a 200 ft² area or would you recommend a higher btu. New sub Thanks

Most precharged lines have nitrogen in them from the factory. If you take the caps off and here a hiss, this means thevlines are already vacuumed and the nitrogen keeps trash and moistur out. But i suppose a vacuum doesnt hurt. Take care!

Ha ha, we just installed 3 or these units around here. We don't say "cheap" they were just "financially available". Yes, they work well. Just not sure how long.

Good video

I still never saw where you connected the gray cord to? I recently ordered the comfortotal 24000 BTU

Thanks great job! I wonder how much to buy the vacuum and gauges are, and would like to see you do an update review of this unit in about a year.

What is the size of the adapter used when hooking up the vacuum gauge?

Looking at getting about 3 of these to add AC to my house. My question is on the 220v version here does the power input hardwire connect or does it plug into an outlet? It looked like you put an outlet in an outside box to plug it in but I couldn't tell 100%.

hello, how has it held up?

Thanks for the video. The cable colors that came with mine dont match the instructions. Do they connect 1 to 1, 2 to 2, 3 to 3, 4 to 4, 5 to 5

Was this unit pre charged? I didn’t see you have to do anything other than connect the lines and open the valve. Please let me know. Thank you!

So the mini split gets power from the indoor unit? (Receptacle?) no need for outdoor unit power?

I just bought one and the compressor does not turn on so it’s only blowing regular air. I opened the valve as well. Any idea what it could be?

Does the outside unit get power from the Cord looks like this 🔌 from inside

Hiya!! My landlord had this same kind of heater/ac unit installed in this house where I lives few weeks ago and got heater worked perfectly for 2 days then never worked afterward. Can you please explains me how I can get this heater comes through. Thank You!

Great video. Do you know what the seer rating is on your 1 ton unit?

prices for mini splits in the usa seem a lot higher... in europe you can buy a good brand for 400 - 500 euro. The cheap ones here start at 250 - 300 euro

Does your heat kick off for "x" amount of time and the temp flashes? Mine is doing that didnt know if yall had the same issue

I wonder how well this unit heats in cold temperatures?

I just installed mine, I had rubber seals in the protective caps coming from the inside unit, do they get used or are they only for shipping and protecting the flare fittings?

What outlet did you use? I can’t find a 220 outlet for that style plug. Did you use a 20a?

Question we just installed ours last week it threw a code F4 this morning can't seem to get any response from the guy we bought it from

Great installation! thanks for taking the time to share it. Quick question, What type of ROmex wire are you using? 10/3, 10/2, 12/3 or 12/2? Also, did you add a 20A breaker or used the current one that has the outlet you used power from? I am installing the same unit Comfortotal 240V and would like to extent the outlet but I am not sure what Romex size wire to use. Also this outlet I will be using has a 40A breaker at the panel. Do I need to add an additional 15A breaker for this unit? A 20A breaker? or just use the 40A breaker that are already wired for this 240V outlest I will be using? Thank you !

Do u like it? I’m getting it as a booster for our house so we can turn up the central ac a lil bit and save on electric lol

Our display is in C not F. How do we change it?

We have two of these tripping breakers. Clean coils, condenser fans operating, no error codes. Runs for 15 minutes then trips…

Can i just run the power cord to a extension cord outside to hide the power cord from showing inside the house?

Can’t you just run power to the outside unit to power up both?

Sir good afternoon,,need help How you straight de pipes from the evaporator unit without kicking or bend?

My question is if you would have had bubbles due to a leak after spraying soapy water what would you have done? Tightened up a fitting a little bit or if that did not work would you have lost all the refrigerant and had to pay to refill it?

Does the manual say what it can do in heat mode? It should give a temp range until it loses efficiency

So it doesn't come precharged? I'm looking for a mini split that is DIY friendly. How good are cheaper units? Also can you add another air handler if you wanted to down the road?

When I put my confortotal ac into heat mode the light indicator flashes and then once it starts blowing it's cold air and everything starts freezing. It also freezes in clean mode. Can you tell me why it would do this?

Hello. But how to make the air inside turn off automatically in the cold

On the unit the fan runs all the time won't shut off with the compressor.

Orange wires, my Mini split is dripping air from the center of the unit at the bottom. Any ideas why? Brand new unit

What's the energy efficiency for one of these?

What was the amperage on your breaker for this?

We are about to buy one of these. You still happy with this still? Seems like nice unit for large bedroom.

Been using mine 1 week...having to use the heat pump past 2 days...the temp light display flashes then stops...can't seem to locate why it does it...any input?

How did you get it shipped. We are in northwest Ga. FedEx Ground is horrible and can’t get us delivered on anything. Can you get this shipped via UPS ground. Thx in advance.

Any idea on how to hardwire this directly to the 220 wire?

This unit doesnt have any freon when you got it? I saw you charging it. I dont have those tools to recharge and discharge

While yes it looks like an okay unit I’ve installed many heat pumps for the company I work for and I really don’t like the idea of this one sending the full power to the inside unit and to the outdoor I prefer the usual method of sending power to the outdoor unit and the indoor getting powered by the outdoor

Did you have to do a vacuum for the refrigerant line? Do you have to?

Does the 220 power go into the inside unit or outside unit?

How has it been working since installation?

How is the unit holding up? It's been two years. I'm thinking of purchasing one.

Is it pre charge line set

Update on the unit?

Two concerns. Not shown but line set can't be trimed and reflared (never seen before) 4" copper stubs fused ??? somehow??? to aluminum (unflarable) tubing. Secondly, vertical loops in line set retard oil up take.

I just spent 800 to have that same mini split installed

Is it still working ? Im about to buy one

How is the unit running after all these years

Thanks. Excellent video tutorial. 👎 thumbs down to Biden advertising his lies on your great channel

Hi good video does it still work for you ?

did you bolt the outside unit down? did you get your hamburger

I wish the word Con wasn't in the name.

I MUST SAY THIS GUY IS STRAIGHT UP. IMAGINE HOW MUCH FASTER HE COULD HAVE GOT THE JOB DONE WITHOUT FILMING. AND CONFORTOTAL IS ABOUT THE LOWEST COST UNIT OUT THERE. WHAT MAKES THE PRICE HIGHER IS POLITICS, AS THEY PROBABLY ALL COME FROM THE SAME PLACE, IN CHINA. LET ME SHARE SOME ADVICE WHEN GETTING A MINI SPLIT ONLY GET A SINGLE UNIT (IN OTHER WORDS 1 OUTDOOR UNIT TO 1 INDOOR UNIT). WHY ? BECAUSE THE MULTI UNIT WHEN THEY FAIL WILL F YOU BIG TIME. IE I HAD A SANYO POS SYSTEM WITH 1 OUTDOOR UNIT AND 3 INDOOR UNITS. UPON FAILING THE DIAGNOSIS WAS TO CHANGE "ALL" THE COMPUTERS IN BOTH THE INDOOR AND OUTDOOR UNITS MEANING THE COST TO BUY THE PARTS WAS MORE THAN THE SYSTEM ITSELF. F THEM. GET SINGLE UNITS AND WHEN THERE IS A FAILURE THE WORST CASE IS JUST REPLACING 1 UNIT. WELL THANKS FOR LISTENING. AND A THUMBS UP TO ORANGE WIRES GARAGE.

There is no need to vacuum anything look carefully at what you're doing there will be no moisture to damage the inverter compressor which is highly unlikely make your connections put your oil and nonsense on the flares tighten everything up and then look carefully at your brass works see the schrader valve on the low or fat line so with everything connected and tight you open up the high side and you let it run until you hear it start to come out of the schrader valve on the low fat line that you have depressed the high sides open it pushes out all the air moisture and nonsense through the schrader whoosh you feel it on your hand close it up open the low side and turn it on no need to vacuum

if i was you-i would EDIT this video and cut out that part of you dumping that can of gas into the air... the feds have been trolling vids and handing out fines. that dump you did ids a $25,000 fine. just cut that 2 seconds out of the vid and upload again. i would also cut out the part that you say youre not licensed. im not against you-i dont think lic should be required, but im lookin out for you-the feds hate teh working man and if you get enough views-it will get noticed...