Installing The Oil Pan On The Chevy Big Block

Рет қаралды 27,785

5 жыл бұрын

On this episode of Budget Build Garage Nick shows you how to install an oil pan properly. But this isn’t just a oil pan replacement video, we’ll show you the process of installing high volume oil pump on a big block, and you’ll see us installing one piece nitrile gasket for oil pan that will keep prevent any oil leaks on the V8 Chevy Big Block 454 cubic inch engine.
This procedure is almost identical to the Chevy Small Block or any other V8 engine.
Nick also demonstrates how to check the clearance from the oil pump pickup and the bottom of the oil pan.
The oil pan kit we use in this episode is: www.summitracing.com/parts/su...
Check us out on Instagram: / budget_build_garage

Пікірлер: 24

@InvincibleExtremes 5 жыл бұрын

Every time I see that 66 I can't help but think of how cool it'd be to come down with my 67 and go to an event of some sort

@BudgetBuildGarage 5 жыл бұрын

That sounds like an awesome idea to me.

@mikeallen3646 3 жыл бұрын

great video, what harmonic balancer is that you have on there?

@BudgetBuildGarage 5 жыл бұрын

Thanks everyone for watching! What is your preferred style gasket when you replace an oil pan?

@macfrederick7014 5 жыл бұрын

The gasket you used was the Mr Gasket 6663 correct ? Ive heard alot of guys having trouble with the felpro being to tall at the front

@dannycartes6701 3 жыл бұрын

I had a machine shop rebuild my 454 and they used a multi piece gasket that has failed. Now I will use one of these.

@danielmacpherson1630 3 жыл бұрын

The one piece failed on me. at the back.

@RonHelen Жыл бұрын

Do you need a gasket for the bottom of the timing chain when you use the one piece oil pan gasket?

@dsadzaglishvili 5 жыл бұрын

Is it 2pc rear main? And also what year is block? I have early 70's version so looking 1 pc gasket...

@rcmafia4990 8 ай бұрын

Do you by chance have the part number for the copper summit gasket you used I can’t find that gasket thru O’Reillys

@djhightopfade4940 5 жыл бұрын

Cool video. Got one question. Is there any advantage to multi piece gaskets?

@BudgetBuildGarage 5 жыл бұрын

Not any advantages that I have found. If someone has one I would like to know too.

@smokeydabeecharlescoleman8365 3 жыл бұрын

I bought a dead horse. 1978 Chevy c-20 454 . Replaced the tanks, lines and fuel pump because of rust issues. 1 month later my fuel pump fails. I take it off and the arm has 0 spring tension. Just flops around. Any idea what I should be looking for, or is this a typical issue with that fuel pump ?

@ginochavez5057 3 жыл бұрын

What kind of bolt did u use on the oil pump??

@63grandsport11 5 жыл бұрын

Will you be replacing a pan gasket on a motor thats still in the car.

@BudgetBuildGarage 5 жыл бұрын

Not unless I have to. That job is a pain. If you are planning on doing one in a car it is the only time I say it's ok to not use a one piece gasket.

@207shenanigans 2 жыл бұрын

Did it leak?

@a807511 5 жыл бұрын

Just for future reference, .. 12ftlbs=144inlbs.... Plenty of inlb torque wrenches out there.

@BudgetBuildGarage 5 жыл бұрын

It is a good idea to have a inlb torque wrench. I've done this enough times to know by feel. This things been on the road for a while and doesn't leak.

@a807511 5 жыл бұрын

@@BudgetBuildGarage I figured it was fine. And do do almost everything by feel. But I know a LOT of people don't realize the simple math for inlb to ftlb lol so I threw it out there for anyone reading the comments :)

@BudgetBuildGarage 5 жыл бұрын

@@a807511thanks. I always appreciate the info and the comments.

@PAKfromFYCB 3 жыл бұрын

i thought the same thing ft/lb x12= in/lb