Installing the RealTruck BAK X4ts (and my plans for using the T-slots)
Рет қаралды 11,093
Күн бұрынThis is the best tonneau cover I have ever installed on a truck of mine! This cover checks the boxes for everything the perfect tonneau cover should have.
Here's my affiliate link to the cover I installed in my video:
imp.i128439.net...
Head over to my Instagram for more pictures and videos of my projects:
/ waterfowler_41
Thanks for swinging by my channel!
All my affiliate and coupon codes are here:
linktr.ee/wate...
Coupon Codes
Diode Dynamics/FORM Lighting - Waterfowler41 for free shipping
Truck Trolley - WATERFOWLERFREESHIP for free shipping
Suspensionlifts.com - Waterfowler41 for 5% off
Shifts and Grins - waterfowler41 for 5% off
FitCAM - rfrram150 for 10% off
Brink Wheels - Waterfowler for $100 off your order
Corsa Performance - Waterfowler for 5% off
Jam Handle - Waterfowler41 for 15% off
Magic Brand - Waterfowler41 for 15% off
Lamin-X for 20% off your order, use this link: laminx.refr.cc/...
Thanks for watching!
WF41
@decline1129 4 ай бұрын
Been looking for a real person using this and not just marketing guys. Thanks
@WaterFowler41 4 ай бұрын
Its an awesome cover! any questions let me know.
@darek816 3 ай бұрын
@@WaterFowler41Do you think that Rhino-Rack Vortex Crossbars will fit, I saw that they are easy to remove.
@DanielWraps 2 ай бұрын
It can be a little tricky/have some strange inconsistencies that generally work themselves out through use and heat.
@MyGuyKirby 2 ай бұрын
Tip for protection application. Roll the cover back so you can treat it in sections while standing inside the bed. Lightly mist that section and wear a nitrile glove one hand, use that gloved hand to spread the product out as evenly as possible. You can just let it air dry or use MF towel to mop up any excess. FYI, 303 Protectant (blue bottle) or 303 Aerospace Protectant (white bottle) are same . We use this application method to treat convertible tops.
@mccurjm 4 ай бұрын
Great video! I have the X4ts cover on order for my 2024 Canyon AT4. I already have the Elevate rack here ready for it and am going to have my kayak on one side and a locking cargo box on the other side. Should be a great setup.
@WaterFowler41 3 ай бұрын
Good choice!
@Geezimac 2 ай бұрын
I was looking at a Diamondback Switchback, but now I’m sold. Great video.
@LenTexDIY Ай бұрын
I have a quad fold BakFlip that came with the truck. I'm not a fan. I'm putting this one on order and will be selling my current cover.
@TravisN 3 ай бұрын
Nice set up.. I have a 21 f150, and before that a 2017 RAM 1500, both with the x4s and Adarac rails .. the t-slot wasn't available at the time, and Adarac was one of the only compatible options. Good to see BAK finally caught up with demand!
@WaterFowler41 3 ай бұрын
I had the adarac rail on my last truck, great option but not that the Revovler has the t-slots...GAME CHANGER!
@RedDirtShooter 4 ай бұрын
Would like to see the kayak rack for sure ! Can't wait to see that cause I was thinking about doing this too! Well, for my REBEL of course ; - )
@WaterFowler41 4 ай бұрын
Soon hopefully!
@LenTexDIY Ай бұрын
Thanks! I was debating between this one and the regular X4s. Now that I know it can work with other accessories, I'm going with this one. Even if I never end up adding accessories, at least I have the option to do so if I decide to later one.
@Geezimac Ай бұрын
@@LenTexDIY had mine on for 3 weeks now… I love it. No accessories on it- but I love knowing I have that option.
@3WheelKhalil 4 ай бұрын
Sweet setup, thinking about going the same route for my Raptor.
@WaterFowler41 3 ай бұрын
Go for it!
@MyGuyKirby 2 ай бұрын
Nice review and will be interesting to see how can use the t-slot on the new model. I have been using mine since 2018 on my F150 and am always operating the cover for small loads. The weak point is the end plastic caps that can pop loose (thanks to BAK for replacements).
@BeansMcGavin 2 ай бұрын
Just wanted to say this is a fantastic video and I've never done it before but I used your affiliate link and bought myself one keep up on these kick ass videos
@WaterFowler41 2 ай бұрын
Thanks so much! Means the world to me!
@HammerdownMotorsportsUSA 4 ай бұрын
cool very similar to mine, I think it is one of my favorite styles of bed cover
@WaterFowler41 4 ай бұрын
I’ve always been a trifold guy but I like being able to see out the back window when the beds open.
@HammerdownMotorsportsUSA 4 ай бұрын
@@WaterFowler41 yeah I have a tri fold on my super duty and a cheap roll up on my rebel the revolver is the best imo I’ve had roll n lock too the cassette takes up too much space for me
@RJ12777 20 күн бұрын
Hey great video, because of it i also purchased the same cover and in the process of choosing a rack system. I like the truxedo elevate but i rather not have one that is so high at all times (18” in the lowest position). I was looking for one that in its lowest position it’s able to accommodate the height of the cover in its rolled up position. Which is about 12” or so. If you know of one please let me know. Thanks!
@_ready__ 26 күн бұрын
Best install video on you tube
@WaterFowler41 26 күн бұрын
Best comment on KZfaq
@ourindianadventures1488 4 ай бұрын
I've had this on my Ram 2500 for almost a year and get a lot of compliments on the sleek look.
@MSPOKERPLAYER 22 күн бұрын
Just installed mine. It has a little dip all the way across near the cab. Did you experience this?
@rgrkim 28 күн бұрын
Just ordred X4ts after watching your video. thank you. If you have some suggestion on chase light bracket that will fit in the T-slot. thanks
@WaterFowler41 28 күн бұрын
Awesome hopefully you used the link in the video description! As far as extra t bolts, I have a call in with the manufacturer, I’m trying to find some extras. My elevate rack came with some.
@robertwhite1535 3 ай бұрын
What height would your bed rack need to be so that you can still roll up the cover in its entirety?
@WaterFowler41 3 ай бұрын
10” or more
@DanRibar 2 ай бұрын
Do you know if the t-slot is the only difference between the X4TS and the X4S?
@WaterFowler41 2 ай бұрын
Yes and if you have the x4s, I believe realtruck will sell you just the rails.
@damientrevino9481 4 ай бұрын
Can I get more info on the chase lights and how they are mounted? Or can you send me the link to the video? Thank you I subscribed to the channel over this video
@WaterFowler41 4 ай бұрын
Awesome! The chase lights are SSC2 pods from Diode Dynamics. I will mount them using the t-slots that are built into the X4ts tonneau cover
@lawpapi Ай бұрын
Thank you for this video. I will be going this route. Where can I find t-slot inserts to install some chase lights? I would like to mount a couple BD S2s or DD SS2s. Thanks in advance!
@WaterFowler41 Ай бұрын
I sent an email over to Bak asking this, when I get some info I will post in the videos description. I ended up using extra hardware from my Elevate rack (later video) to install chase lights but I want some more t bolts and I cannot find them at a hardware store.
@matthewwall9699 4 ай бұрын
Thanks for a real review from someone who actually put it on there truck!
@WaterFowler41 3 ай бұрын
You bet!
@michaelroberts1571 Ай бұрын
What’s the measurement from the wall to the end of the tonneau when rolled up?
@WaterFowler41 Ай бұрын
~9.5”
@haroldpapillon4686 Ай бұрын
Not good State with hot Summer. The cover material gonna shrink and pull off both sides of the rails and at the back of bed cover 2 1/2 years later. The aluminum gets so hot, no glue can’t bond for long.
@jezreelsantos733 Ай бұрын
Do you experience water coming from the talegate?😊
@WaterFowler41 Ай бұрын
Only when the back seal gets blast with water when I’m cleaning, otherwise the bed stays dry
@rgrkim Ай бұрын
how is your BAK X4ts holding up after few month? any problems with tonneau cover?
@WaterFowler41 Ай бұрын
So far so good!
@powerthirst989 Ай бұрын
I just installed the bak x4s on my 24 raptor and have an issue with the tailgate hiting the end of the cover when closing. Is there adjustment for that?
@WaterFowler41 Ай бұрын
You may have to lift the rear section of the tonneau rail a bit for the tailgate to clear.
@MikeHoffman-ds4ce 2 ай бұрын
What size are the tracks?
@WaterFowler41 2 ай бұрын
A t-bolt with a head that is 3/4" will work in the track for adding accessories. If you watch my Elevate rack install, you can see the bolts provided in that kit. They are 3/4" wide and slide right into the end of the track.
@jameskelly4494 3 ай бұрын
Curious what rack you went with. I have this on my 22 Tundra and was hoping my Yakima Overhaul would work but it does not. Only adjustable rack I found so far is Elevate.
@WaterFowler41 3 ай бұрын
I’m going to run the elevate rack.
@Adam-sn3fs 2 ай бұрын
Could you expand on why it didn't work, because I'm also struggling with this. Real Truck told me it would be compatible but I only ever see the Elevate rack on these. Did you try using the Yakima t-slot adapters on the OverHaul rack?
@jameskelly4494 2 ай бұрын
@@Adam-sn3fs It is the width of the Yakima bases at the bottom. They overlap the rubber seal on the x4ts by about 1 1/2 inches. To be able to use the cover you would basically be removing the entire seal. If you are ok with leaving the cover closed then yes the Yakima rack can be used.
@jameskelly4494 2 ай бұрын
@@Adam-sn3fs A little surprised they said that it would work. I even emailed the guy that does the install videos after and he was not surprised that it would not work.
@jameskelly4494 2 ай бұрын
@@Adam-sn3fs Yes I did try two different sets of the T slot adapters. I have the set from the Diamondback cover I sold plus I bought the Yakima tonneau cover adapter kit. The T slot adapters fit but the problem is the Yakima bases are too wide and overlap the rubber seal on the x4ts.
@user-lz4ku8xu9x 2 ай бұрын
Can you put the product link please
@WaterFowler41 2 ай бұрын
Link is in the description
@mscisco1977 3 ай бұрын
Why isn't anyone being honest with the quality of this cover? The title should be, Superglue Not Included. If you had an older BAKFlip from 10-yrs ago, you will be very disappointed with the amount of plastic. The locking mechanism used to be housed in aluminum - now it's thin, brittle plastic. The end caps are as well - they fall off way too easily. Upon receipt, all plastic parts were cracked and/or had fallen off. Even worse, of the four screw holes for the locking mechanism, only two were used per side - so the entire locking mechanism falls out when you try to use the cable. This would be fine if sold for $100 - that's about all it's worth. This isn't a cover for the working truck - it's there to get into place, be left alone and look good (assuming the endcaps don't fall off as you drive).
@WaterFowler41 3 ай бұрын
Sounds like you got a dud or are beating the heck out of the cover beyond its intended purpose. I’ve been extremely happy with the cover as have most across the forums. Regarding the 4 holes for 2 bolts per side, that’s not uncommon as many of these rails are used across different applications, cutting one type of bracket is a lot more efficient than cutting multiples when you look from a manufacturing lens. Also, 4 bolts aren’t going to provide any noticeable benefit over the two the cover requires.
@mscisco1977 3 ай бұрын
Cover is brand new, unused, out of the box. And yes, partial assembly is a huge problem. The cable housing lifts off of the rail when trying to use the cable. They drilled four holes for mounting, but only used two. As for the old one with aluminum parts - yes I did beat on it for 10-years and, yes, it held up perfectly. Should have pulled it off before I sold the old truck!
@TheBuilderCA 4 ай бұрын
How much weight can you put on it
@WaterFowler41 4 ай бұрын
Assuming you are asking how much weight you can put on the rails since this isn't exactly a tonneau cover built for hauling loads like a Diamond back is, they don't list the specs for this cover but I would assume they are close if not equal to the specs of the Elevate t-slot rails which is 500 lbs when driving on road and 750 lbs when parked (rtt with people in it).
@haroldpapillon4686 Ай бұрын
Not good State with hot Summer. The cover material gonna shrink and pull off both sides of the rails and at the back of bed cover 2 1/2 years later. The aluminum gets so hot, no glue can’t bond for long.
@WaterFowler41 Ай бұрын
My truck is garage kept, unlikely to be an issue for me in the time I own my truck. So far the cover has been great!
Zero To Awesome
Рет қаралды 187 М.
Fabiosa Best Lifehacks
Рет қаралды 20 МЛН
C & H Auto Accessories
Рет қаралды 2,7 М.
Earl Owen Company
Рет қаралды 85 М.
Luminous Matrix
Рет қаралды 8 М.