Glad to be a bad influence in your potential next purchase 🤣 start looking, they aren’t getting any cheaper!

Glad it was helpful! Thanks for the comment :)

I'll get on a pump timing video, I have a hillbilly way of doing it where you dont need any special tools and it can be done in minutes!

Good idea! Maybe I got a faulty one, I’ll see if I can get in contact with a snap on dealer

Thanks!

I’ll have to give that a try! Sometimes there’s a little dot in the centre of the tamper proof screw, I imagine that’s what you’re hammering into

@Hazardous-Hotrod-Knowledge Yes, it has a small indent on the top so when I tap the torx in, it is able to make its own shape, plus I think the shock helps loosen the bite before trying to turn it. I believe it is a 25 or 27 on the top and 20 on the smaller afc housing back plate. I reuse the same fastener once doing this.

Ive used “handytek” Amazon 4k gov springs in more applications than I can count and have never had a single issue. What trouble have you been having?

I used a set of DAP springs in one truck and they were super touchy. Almoat felt like 5k springs. I've adjusted them multiple times and still can't get them how I want them. The other 2 trucks I've done I've used cheap ones with decent luck.

One guy suggested to get it warrantied, so I’ll try that and if it’s still junk I’ll pick up one of theirs!

@@Hazardous-Hotrod-Knowledge yeah they're awesome specially made for delivery valves

It’s more than that for the differences between the pumps. The 180 and 215 Hp injection pumps have a completely different pump cam that delivers fuel at a faster rate, as well as having a better plunger design. The copper washer is just a different sort of thing they did with the barrels in the 160/175 pumps to seal the delivery valves and was done away with the later pumps

@Hazardous-Hotrod-Knowledge Thanks for the reply I did some research and found out the same , I am bummed because my engine was built as a high output with a 215 pump, but a shop replaced the pump with 175 horse yrs ago .

I set up the AFC housing pretty mild but typically a truck with these mods on the stock turbo will go to about 350hp

No estoy seguro de cómo traducir al español y puede ser mucho trabajo con todos los subtextos que tengo en el video también. Gracias por ver y estar interesado en el video, espero que de alguna manera puedas disfrutarlo :) Utilicé un traductor en línea para esto, solo puedo hablar inglés.