Instant Hot Camp Shower in a Box

Рет қаралды 1,227,825

4 жыл бұрын

I can't believe I called it a hot water heater. It's just a water heater, and usually heats cold water!
In this video I mount an instant hot water shower in a Pelican style case, to take with my on my long overlanding and camping trips. It'll make things so much nicer, since I found the wet wipes just weren't cutting it in the desert last summer!
Note that finding fittings for this was difficult, but the ones I have listed below are a perfect fit.
Full parts list at www.revereoverland.com/shower
Don't feel like building your own? You can now buy ready-to-go shower units from Camplux and Joolca:
See Camplux's shower here: amzn.to/3oGnZpg (pump sold separately: amzn.to/3nsAVjq)
See Joolca's showers here:
PARTS LIST:
- Camplux shower and 12v pump**: amzn.to/3oGthB1
**If it's sold out, purchase separately: amzn.to/3qL5gLQ and amzn.to/3HqCEO5
- Monoprice hard case (minimum 7 1/4” x 12” x 12 1/2” internal dimensions required): amzn.to/34LgSl2
- Flame King 5lb propane tank: amzn.to/2Vlwedb
- Power Tank BKT-2285 bracket for 5lb propane tank: amzn.to/2ykFZiG
- 2x 3/8” ID hose for shower hose and water in/out: amzn.to/2Viwk56
- 2x 1/2” BSPP female elbow to 3/8” barb for water in/out: amzn.to/3csXyvz
- 3/8” barb to 3/4” GHT hose connector kit to connect to quick connector kit: amzn.to/2VhoHMb
- 3/4” GHT garden hose quick connector kit for shower hose: amzn.to/3aknAj2
- Hose clamps: amzn.to/34JRAnq
- 3/8” filter: amzn.to/3bnx9iE
- SAE connector for pump: amzn.to/2wSVT3q
- SAE to fused 12v (I bought from Rural King): amzn.to/2wSVT3q
- Gas line teflon tape: amzn.to/2yolWzI
- McMaster-Carr 1/2” BSPP female to 1/2” BSPT male elbow part #4860K424 for propane connector: www.mcmaster.com/catalog/126/60
- 6x M6-1.0 X 20mm pan Phillips machine screw (bought from Lowe’s): amzn.to/2VyIrKe
- 6x M6 Nyloc nuts (bought from Lowe’s): amzn.to/34S4q3a
- 12x M6 washers (bought from Lowe’s): amzn.to/2VCWH4H
OTHER TOOLS/PARTS:
- Soldering iron
- Solder
- Heatshrink
- Heat gun
- Drill: amzn.to/3aoOvKG
- 1/4 inch drill bit: amzn.to/2xGsKc0
- Flathead and Phillips screwdriver
- 10mm socket and wrench
- Silver Sharpie: amzn.to/2XN3riZ
ACCESSORIES:
- Jackery Explorer 500 (5% off with REVERE500): amzn.to/3dIEs5V
- Front Runner water can with tap at the bottom: amzn.to/3bsYC2u
- Frontrunner brass tap replacement: amzn.to/2xMCGkh
- Another 3/8” barb to 3/4 GHT to attach tap to the hose: amzn.to/3aoNen2
NOTES:
- Heater unit takes 1/2” BSPP fittings on all water and propane in/out.
- 3/8” hose is used in my kit, and you can use 1/2” barb with it if 3/8” isn’t available.
- The quick disconnects and the barbs that attach them to the hose are 3/4” GHT (garden hose thread), and this is the standard thread found on garden hoses.
- Avoid mixing metals on the fittings. A brass fitting connected to a stainless steel fitting is likely to corrode quickly. If you have to mix metals, do not mix them on the heater unit itself. If it corrodes to the heater unit, you might never get the fittings off!
- You can purchase shower (amzn.to/2VfNyjE) and pump (amzn.to/3ahwGx2) separately.
- The propane tank mount was unavailable on Amazon when I created this video, but can be found from various sellers on eBay.
Disclaimer: Some of these links are affiliate links, where I earn a small commission on the sales, at no extra cost to you!

Пікірлер: 810

@RevereOverland 2 жыл бұрын

Don't want to build your own? Joolca's HOTTAP is a fantastic (and maybe even better) alternative for less: kzfaq.info/get/bejne/js-Ef8Sb3MeVj4k.html

@MrJohnE4 2 жыл бұрын

I'm putting this system together this summer. Have the pelican box already. Just need the water heater. We normally will primitive camp for up to 5 days, will be nice to have a hot shower at night.

@jerryjamify 2 жыл бұрын

How hot does the water get?

@SD-pi9co 2 жыл бұрын

Joolca is overpriced junk

@netook8 2 жыл бұрын

I bought a buck converter to get the 12V voltage down to 3V to see If I can directly power the heater without the D cell batteries

@northislandguy Жыл бұрын

I looked at the link you posted, your DIY is still far superior than Joolcas options Enjoying your videos 🤙🏽

@DeanWright-gj2nm 10 ай бұрын

This was an exact replacement for the old one that lasted about 10 years. kzfaq.infoUgkx7yWIKcrbA9KMHkGSfcgxW2lsjHT6B8Sh The top of my mitigation tube by my roofline was just a 90 elbow which allowed too much debris to fall down into the fan, eventually ruining it. Without this issue, I bet it would have kept running another 10 years. When I replaced this fan, I added an extra elbow joint so the top tube now it does a 180, which should solve that problem. The radon guys around here wanted to charge me a $300 diagnostic fee, then parts/labor (probably close to $600 total). I installed this all by myself in about an hour for the cost of the fan; it would probably be even easier/faster with two people. FYI the manufacturer's warranty greatly differs depending on whether you install it yourself (1 yr warranty) or have a licensed installer do it (10 yrs).

@Scandal929 3 жыл бұрын

Not only a great idea, but posted all of the parts to make it easy to replicate.

@Just_Fishing_TailsTM 4 жыл бұрын

We bought this heater unit to wash our dogs when the weather is cooler outside. Works like a champ. I was a bit pessimistic about how well it would function, but I was impressed. In a clinch this thing would make your 3rd world situation a bit nicer. Love the idea of using the box for travel and setup.

@iiPlay2Much 2 жыл бұрын

How is it after a years use

@Scottyhutch1 2 жыл бұрын

You could probably not have done that video any better. Such a detailed yet down to earth (no marketing/ overboard crap) tutorial. This is exactly what I wanted to do with mine and you just made it a hell of alot easier. Cheers bro. Keep em coming.

@aai3661 3 жыл бұрын

I bought this exact one for my RV once my in house tank split. It works no problem with the RV's fresh water tank pump and it works only when I turn the shower head on so uses much less water. Another HUGE bonus is it uses it's own separate propane tank. I even mounted it on the shower wall. The flame is contained within it and poses no huge risk, however it is wise to be very vigilant in that sense, but can be done.. Love it so far.

@dacouniamalia9014 5 ай бұрын

Thank you very much !!! Finally one person who does show ""how to install'' and ''What parts do I need'' (and even better !), links to get the parts to properly install the water heater kit !!! Lord Have Mercy ! You're doing the retailer's job. They seem in a hurry to sell their kits, ...but, with poor or any explainations at all... in a kind of '' ...have fun (or not) figuring it out for yourselves !'' mode... It was not like that before... Hopefully, you'll get some type of rewards from them companies... Thank you very much again and Prosperity be upon you !!!

@jasonx409able 5 ай бұрын

I bought the water heater and the water pump 3 years ago when I came across this video, i need to finish putting this together as i like to go camping alot with my family.

@flikajones6109 2 жыл бұрын

" . . . if you found this . . .". This is probably one of the BEST IDEAS & MOST USEFUL videos I've ever seen! You, dude, r a genius! Thank you for being you. And thank you for taking the time to make this video! Very complete & comprehensive.

@keithbrookshire 3 жыл бұрын

I have, and regularly use the EchoTemp version of this. They appear to be the same. It's fantastic.

@AdmiralPreparedness 3 жыл бұрын

I ordered the heater, pump and case. The heater and pump arrived today. Now going to the hardware store for the hose, clamps and the other hardware needed next week to assemble mine just like yours. Thanks for saving me the chore of fitting everything to make mine also easy carry and use. Cheers!

@beckettvideos 4 жыл бұрын

I have this unit mounted in my truck. Used a privacy tent with a hole in the top to run the shower head. Worked well.

@RevereOverland 4 жыл бұрын

Yeah I'll be using one of those pop up tents too!

@ricerealtor980 3 жыл бұрын

@@RevereOverland Put an inline weight on the end of your intake hose to keep it at the bottom of your jerrycan...

@Dave-sw2dm 3 жыл бұрын

Awesome idea! I've been using black solar shower bags. I would have to boondock a lot to justify the cost of everything you used to make this awesome build.

@johnr5608 4 жыл бұрын

You presented that very well. Simple and straightforward. Thanks a bunch!

@RevereOverland 4 жыл бұрын

Glad it was helpful!

@patmcnamara5691 3 жыл бұрын

Excellent instructions. Made this today off your parts list and step by step instructions and it works perfectly. I did up size to the slightly larger Pelican box and everything fit nicely inside.

@ProfessionalArmourer 3 жыл бұрын

Add washers to the screws that come through the case before the nuts pull through the plastic, Distribute the pressure!

@athenaofflorida1244 3 жыл бұрын

Pretty sure he did

@RoryVanucchi 4 жыл бұрын

Good post. also good for off-grid camp.

@mrhalfstep 3 жыл бұрын

Great setup! Just wanted to mention to you and others that may build one of these that you don't really require clamps on the suction line of your pump since it will always have negative pressure ( vacuum) on it when the pump is running. I like the idea of the quick connect on the pressure hose. By throwing in a garden hose head attachment with quick connect, you can pop it on and just run cold water through it to blast a little crud off your feet or tires or wake up a friend who has overslept (from a safe distance).

@jimdavis5628 3 жыл бұрын

Use a clamp, over time and usage the hose will relax and allow air to get in.

@HectorCastro-wn4jc 3 жыл бұрын

Great for power outages! Good Job. Building one soon.

@hoosierinthewoods 3 жыл бұрын

Great job!! I am setting up a slightly different setup on my teardrop, but your video was a HUGE help to me. Thanks

@beach3girl459 4 жыл бұрын

BRILLIANT! No more quick, cold showers for me

@toandang4299 2 жыл бұрын

I followed this after watching your video, and it was on-point with the instructions! To fix the issue with the hose coiling up in the water tank, I essentially made a "tumbler straw". I bought some 1/2" PVC, a coupler with regular female on one side and FPT on the other, and a nylon 1/2 MIP to 3/8" barb. I cut the end at an angle to seat better with the bottom, and it works great! You don't have to glue the coupler, as the suction from pump is plenty to keep it together. All for about $7 USD. Also, I went with a 25 ft expandable garden hose (there is a 15 ft, but it's more expensive) for the shower head. It compresses really nicely and fits a little better inside the case. Thank you very much, and happy travels!

@ravincathomestead-cecilia2894 3 жыл бұрын

Wow great ideal, you can make a few and sell them. Campers would go for this

@jackintrator4retaill 3 жыл бұрын

Definitely interested in purchasing complete.

@tshinn Ай бұрын

Thank you so much for this. I have the same propane hot water pump and when I opened the box I didn’t know I would need all this extra stuff to make it how I like… just like you’ve done lol!

@jamesrougeau 3 жыл бұрын

Excellent! Very detailed setup amen. Kudos on your design and editing!

@daveb7999 Жыл бұрын

BTW thanks for leaving the "forgot the battery" part, during your editing, makes me feel a lot better about some other SNAFU's that just happens with builds such as this. I pretty much followed your build and it's working very well. Can't wait to go camping (with hot water onboard). Thanks for this great video on how to make life better, out there. Nice build!!

@slyflea 3 жыл бұрын

Thanks for the clear instructional video, and an even better list of parts and notes. Should make putting one together less trying for sure.

@g-whiz286 Жыл бұрын

BSPP (British Standard Parallel Pipe) type fittings are almost unheard of here in the US where NTP is king. It appears that ALL of these little on-demand propane water heaters use the same BSPP fittings. I did one last year and it took me weeks and lots of $$ to find adapters. Your readers don't realize how lucky they are that you have already done the leg work for them.

@tedijune6759 3 жыл бұрын

Also, you are correct in pointing out that the Teflon tape is wrapped the same direction as the threads run! Bravo!

@daveb7999 Жыл бұрын

Very helpful build information, Thank You! I really like how compact and self-contained this is, it will be a nice piece of kit for our teardrop. We use the teardrop for camping, but we also have it set up as a 'bug-out' rig in the event of wildfire or other natural disaster. We already have solar, LP gas and water onboard, so this is like the icing on the cake. I used a few of your links and like the way you set this up, so will follow your build pretty much spot on, with the exception of using silicone 3/8" tubing on the outlet side. I also want to access water various ways, trailer source, Jerrycan, or just throw the intake into a creek or lake. Should all be possible with a few extra fittings and hose. Thanks again, great instructions! I also made connections for an external battery (alligator clips) and, cigar lighter.

@mickskinner3493 3 жыл бұрын

Awesome idea and set up, well done 👍🏼

@tedijune6759 3 жыл бұрын

Yeah on making sure you are connecting all with similar metals. You are the first person I’ve seen in a while who actually knows this!

@garyreed354 3 жыл бұрын

I put quick disconnects like you have on a garden hose on the bottom of mine so now I can move it around and plug it in anywhere

@huskynoob7881 3 жыл бұрын

You're a genius. Thanks for sharing. The only update is to route the hose that was leaking outside of box so if it leaks it doesn't sit in box, you don't want to store water and 12v connections in same space.

@pjorgerod522 3 жыл бұрын

Hi, just brilliant. Thanks a lot for sharing. Paul

@hoplite65 2 жыл бұрын

Brilliant! Thanks for the visual on the build.

@matthewkellerman1502 4 жыл бұрын

Thanks for the video, awesome and professional job.

@Adventureswithbecky 3 жыл бұрын

So glad to find this review! Have been looking at this one for sometime. It is a game changer for camping!

@magnuswoolf4868 4 жыл бұрын

Brilliant video just ordering the stuff as moving into my van next month and a shower that’s hot with pressure is an absolute necessity ,thanks bud

@RevereOverland 4 жыл бұрын

Enjoy. Ours was a game changer on this last trip!

@SOLDADITO76 4 жыл бұрын

If this is going to be your final design, instead of machine screws and nuts, you could use some blind rivets. They would not come loose from vibrations, and would look a lot more cleaner. Been looking for a idea for a overland rig and this just what I was thinking myself.

@RevereOverland 4 жыл бұрын

I like that idea! I’ll probably upgrade in the future.

@TheRightLine 9 ай бұрын

I was just planning out this project and stumbled across your video. Thank you for listing all the parts. 🙂

@Network-Mike 3 жыл бұрын

great idea to initially recirculate the water to preheat it!

@mixflip 3 жыл бұрын

I need this setup when I buy my new truck. Great video. I can't pinpoint where your accent is from? Australian?

@henrikm4657 4 жыл бұрын

Nice build! I like the idea of mounting it in a box. I have a similar shower heater. It’s a different brand (Eccoflow) but looks almost identical. I ended up mounting the pump underneath my off-road trailer and mounting RV type inlet/outlet fittings on a panel on the outside of the trailer. So when I want to shower, I take out two hoses, one from the tank to the inlet, and one from the outlet and into the heater. Both have garden hose quick connect fittings. The shower head that comes with your heater looks a lot better than the one that came with mine. The on/off button on mine would constantly get stuck and was almost impossible to use, so I went to Home Depot and bought a new shower head and mounted a 1/4 turn ball valve on it. Works great.

@RevereOverland 4 жыл бұрын

Nice! If I had a trailer I would definitely hard mount my pump close to the tank. For the portable setup it works well in the box.

@elfillari Жыл бұрын

Henrik, instead of traditional shower head, you could buy a socalled "bide-shower-head", wich is originally used for the toilet sides. On this tap there is the flow switch included in the shower head handing

@chrismarinas6903 4 жыл бұрын

thank you for sharing this.

@terryharleyrides6109 3 жыл бұрын

Absolutely great detailed tutorial,......wonderful job,...Thanks For Sharing and for all your hard work,....it really made a huge difference for a lot of people😎✌️

@ib516 4 жыл бұрын

Nice job! Just a tip, I have those same black and brass quick connectors - keep them lubed with a light lubricant or they get sticky and fail to couple correctly. You'll see the little ball bearings inside the female ends.

@673Piper 3 жыл бұрын

Have on of those at my off grid cabin. Works great. Nothing like a hot shower in the middle of nowhere.

@phillipmendoza593 4 жыл бұрын

Excellent job!

@jayrichardson6872 4 жыл бұрын

Yep really good stuff bud. Gona give that a try myself👍 Thanks for the tutorial. It really was detailed and explained great Cheers 🍻

@RevereOverland 4 жыл бұрын

Thanks!

@philliprogers964 3 жыл бұрын

A lot of small commercial businesses which have a few number of employees have instant hot water install under their sink . They're only 12"x12"x4" in size and cost a few hundred dollars plus they don't required anything but a water supply and electricity. They are completely covered under the Uniformed Plumbing Code. I'm really surprised nobody has thought to used them camping

@RVingwithG 3 жыл бұрын

@@RevereOverland WHERE ARE THE LINKS?

@BryanSeaton 3 жыл бұрын

@@philliprogers964 Gas is more practical

@WayneTheSeine 3 жыл бұрын

Fantastic build. Very, very well done....beautiful. I'm sure you will work out the can hose problem...pvc or copper or whatever....be sure to cut the end at an angle.

@allendeanhuscusson459 2 жыл бұрын

You can build so many of those things that ran your cost up. Nice job and thanks for presenting this link and idea. You can get an adapter to refill the mini fuel cans (1-2 lbs)

@TheKPDX 3 жыл бұрын

In a moment of weakness, I splurged on the Joolca recently. Part of it was that I was intimidated by assembling one of these myself. If I had seen your video, I would not have been. I very much like that it is all contained in a weather resistant box that could go on my roof rack.

@daveerickson1330 3 жыл бұрын

If the can has a vent, you could adapt the cap with a fitting & set can on its side. Less likely to leak if no lower fitting. Could add a vent or small hole on tank top opposite the cap if not vented. Cap can then be moved from one tank to another if needed.

@scottk.8494 4 жыл бұрын

Wow, this is so timely for me. My wife and I subscribed to you a few months ago for overlanding since we're moving to Utah this year but we just decided that we're going to convert an old school bus "Skoolie" into a motorhome and travel around a few years. Or maybe forever? We were thinking of going with an instant hot water heater so this is perfect timing! We're going to make the back part of the bus a garage for tools and two dualsport motorcycles and tow my 2000 4Runner Limited behind it. It'll be a sweet Overlanding setup! 🤘

@RevereOverland 4 жыл бұрын

Nice! Utah is probably my favorite state to visit. Sounds as though you have some great plans!

@notsojoerogan 4 жыл бұрын

woah, I'm a Scot K. nice to meet ya

@flyingmedic 3 жыл бұрын

This is an excellent video, thank you for posting it. I will be using a similar idea for putting a shower on the bathing platform of my boat.

@aulderyan 4 жыл бұрын

Good video, well presented . Thanks!

@tisfortiny 3 жыл бұрын

Awesome walk-through 👌

@dalekildal9614 3 жыл бұрын

Great video & thanks for all of the links!

@rawgage9159 3 жыл бұрын

This is friggin' BRILLIANT! I'm starting my build with this week's check 😎👍

@m.d.498 3 жыл бұрын

Did you do it?

@rawgage9159 3 жыл бұрын

@@m.d.498 I most certainly did! Placed my order and just waiting for the delivery 😎👍

@fathernojoy2706 3 жыл бұрын

Some ideas I have are to hard pipe the connections inside the box to maximize space and plumb these to the walls of the box with quick disconnects to the outside of the box. That way you don’t have to mess with anything inside the box. I also have a pump pressurized water tank so I am going to try and use that with out the electric pump.

@HanaTan1985 3 жыл бұрын

What an amazing video! Thanks so much for sharing this. It’s so helpful

@vernonchristopher1379 3 жыл бұрын

Fantastic idea!! THANKS!!

@johnobiro5202 3 жыл бұрын

Great job. Well explained.

@michaeljohn7398 3 жыл бұрын

Well done 👍. Great job. Neat and tidy. Thankyou. Cheers from Michael. Australia.

@ShaneSellsRealEstate 3 жыл бұрын

Great video. Thanks for the detailed breakdown on parts

@daviddredge1178 4 жыл бұрын

Great video!

@mikei8957 3 жыл бұрын

Nice job ! I’m probably going to make one now ! 😎👍

@johnmerton3630 3 жыл бұрын

You buy a water heater then you find out it should be installed outside but you also find out it can't be in the weather. These manufacturers need to wake up that people like once it is assembled they don't like to pull it apart to store it inside every time they use it. Thanks for your idea -I've ordered a hard suit case to mount it in on the side of my caravan [$70 Au dollars] because we've had light rain almost every day for 3 weeks. The output hose is too short and it has quick release for the water connections but not on the gas ,but in saying this the unit works great

@rudbeckia885 7 ай бұрын

I've used mine for two summers working great

@campluxofficial Жыл бұрын

Camplux, providing you an easy and efficient outdoor life style！ Thank you for your support and love for camplux products!

@rossbrooks2208 3 жыл бұрын

This is awesome !!! Great idea.

@CriticasDeCineEn2Minutos 2 жыл бұрын

Super nice idea dude !

@tkevin849 2 жыл бұрын

Great, find this pump made by us the old model. We had update the pressure switch already. We are theOEM factory of JOOLCA AND CAMPLUX AND KICKPASS

@christaggart2769 3 жыл бұрын

Great walkthrough! Thanks!

@derykmacleod4979 3 жыл бұрын

A really Great Idea! Call me crazy, but after a day of camping, being covered in sweat, DEET, and bonfire smoke I like a quick shower before sliding into bed in my little 2010 Ford Transit Connect Campervan I am building. I installed a 15 gallon water tank, have pressurized water for my sink and current cold water shower. Just need a "T"connector for my 1/2 sized propane tank and connect it up. Makes camping much more civilized and nice to come home after a long weekend clean. oh, I like your shirt, Heathen? Happy Travels!

@grahamulax 2 жыл бұрын

This is amazing! I just got my camplux and have been wondering how to wire a 12v system close to it.... Perfect video to find :)!

@nathanmciver6496 Жыл бұрын

Thanks! Needed the motivation tonight! I thought a pump might be needed! I was thinking gravity fed except it would be easier to be able to pull water from whrever you wanted instead of lifting a bucket

@jonathanbrazeau970 3 жыл бұрын

this is really nifty man, good stuff!

@johnboucher221 3 жыл бұрын

I use a heat exchanger on my rig, I use the engine to heat up the water, it moves through the system so quick it's never too hot except when you first turn it one Water enters a line at the back of the truck through water storage or stream to heat exchanger then travel back via RV pump.

@abumalik97 3 жыл бұрын

thats cool , similar to the HotBox device from Aphcarios

@helmutprost9714 2 жыл бұрын

Really great video and idea!

@garyreed354 3 жыл бұрын

I have the same one I put it in my RV I had it is it for 2 years it is fantastic and I also put one in my house in the basement and it does the job

@tomnelson3393 2 жыл бұрын

Nice set up I glad it works for you

@ScenicCityAdventures 4 жыл бұрын

Great video! We used one of these little hot water heaters on our trailer, but it's been in storage since. Maybe time to pull it back out...

@RevereOverland 4 жыл бұрын

Yes! It'll be so nice to shower out on the trails. I'm hoping things start to open up soon so we can get out and actually use all the gear I've been accumulating!

@bryanchristensen5097 4 жыл бұрын

Is the MP case you have listed on the parts list the same one you used in the video? It is obviously larger than the minimum but it seem bigger (hoping so it’s not so tight). You are a pro at putting things in a box. Thoroughly love my diesel heater in the metal box-thanks for all your help.

@Dizzyish 4 жыл бұрын

Nice build, thx for sharing.

@RevereOverland 4 жыл бұрын

Thanks for watching!

@michaelflora375 2 жыл бұрын

I have a Triton 10LPropane camp shower heater that supplies hot water for my cabin. Have used it for the past four years and have never had a problem with it. I love the fact that it only uses propane where you turn the hot water on. Wouldn't take for it and will always have one in my cabin.

@vanstour5781 3 жыл бұрын

Thanks for very detail training

@planecrazyish 3 жыл бұрын

Great job!

@GF-pc5bt 3 жыл бұрын

Excellent job ... you just earned a subscriber 😀

@johnnybomb08 3 жыл бұрын

Genius level over 9000!

@pah6539 3 жыл бұрын

Appreciate the video. Great explanation. I'm a visual learner. 👍🏿😀

@paulcomptonpdphotography 2 жыл бұрын

Great idea

@mschrage618 2 жыл бұрын

Definitely building one of these for my camper van. I shower at Planet Fitness most of the time but it would be nice to have this as an option when I’m off grid.

@karlabrewster8605 3 жыл бұрын

I have 2 of them. They are freaking awesome

@garykos1308 3 жыл бұрын

Excellent detailed video. Thanks.

@johnfitzgerald5158 3 жыл бұрын

Really like this set up. Just a suggesting on the pump hose. There is a silicone hose in that size that is much more pliable/relaxed than the vinyl/mesh tubing. It just behaves better and can hang more freely whereas the vinyl likes to remain coiled.