Insulating ductwork fittings Part 2 - Zone dampers, Return cans, Endcaps, Square to rounds (# 103-2)

Рет қаралды 13,059

Күн бұрын

If you don’t know the basics to insulating, watch our videos “Insulate round pipe” and “Insulating round pipe elbows” at the links below;
• Insulate round pipe us...
• Insulating round pipe ...
Tools used;
Tools used;
Wiss Scissors
amzn.to/3HKBKP5
Bostitch Staple Gun
amzn.to/3V8xCLN
Malco Hole Cutter
amzn.to/3FzAUBP
Snap lock punch tool (for plaster flange installation)
amzn.to/3G1aiv3
Duct tape used
amzn.to/3PD7441
Mastic tape used
amzn.to/3HHVAdx
Razor Knife
Sharpie Marker
5/16” ratchet wrench (for EWC type damper motor removal)
Drill with ¼” driver
As an Amazon Associate I earn from qualifying purchases.
Notes; • Do it right the first time! Quality is important AND your reputation is ALWAYS on the line!
Video Chapters
0:00 Intro
0:17 Zone Dampers
8:13 Return Cans
17:15 Endcaps
22:35 Square to Rounds
27:41 Closing

Пікірлер: 21

@bjmassie5892 Ай бұрын

Your videos have been very helpful with installing my own system in my home. Thank you so much.

@SirRCTHETHIRD Жыл бұрын

the quality of this content is keeping me alive, just got my van stuck in mud after a day of rain at work.

@williammarik6159 Жыл бұрын

Lol ! Insulating ductwork certainly will not fill the comments section. Thx. Andrew. Great Work !

@T-Willfixit 7 ай бұрын

Hey I really appreciate you taking the time out of your day and helping us Tradesman how is supposed to be done looks great thanks again

@davidshettlesworth1442 Жыл бұрын

Thanks for an excellent educational video. I learned a lot to help me in my home project.

@brotherclay6575 Жыл бұрын

Thanks for the tips Andrew!!

@tes10181 11 ай бұрын

thank you for sharing with us. enjoyed your work. thanks again

@Pennconst101 Жыл бұрын

What I would give to have spent time with you when i was just starting out. Quick note about dampers with the system running and no damper head installed, you can turn the damper and the pressure will hold it completely closed against the gasket and then you can power close your damper and install it and rest assured you will have it installed with full range of motion correctly. This is KILLER content!! Kudos to you for your craftsmanship!

@manuelrodriguez5952 Жыл бұрын

Yeah nice

@germanagudelo6533 Жыл бұрын

Thank you so much for all the info and your time sharing your experience and knowledge. I would like to ask about labor and material prices if possible and please provide a link where you get your tools and material. Again thank you.

@Davidandgoliathhvac 11 ай бұрын

Your attention to details is 👌🔥🛠

@Ariccio123 10 ай бұрын

This is art.

@shellz5437 3 ай бұрын

i need a guide on how to wrap the triangle plenums for mitsubishi pancake units

@scottschweigert1657 5 ай бұрын

is there a way to insulate a manual zone damper adjustment handle, while still having the ability to balance it?

@aglmechanicaltips 5 ай бұрын

Not the cheap ones but there is a brand out there that makes this possible

@YouTubeUserNumber1 Жыл бұрын

Watching you wipe the fiberglass insulation off the vapor barrier made my hands itch. What kind of fiberglass duct insulation do you use that doesn't irritate your skin?

@aglmechanicaltips Жыл бұрын

It's normal fiberglass insulation. It does irritate my skin. I think over the years I've built a tolerance but it still sucks...

@indulgezbulge Жыл бұрын

Sticky lint roller is what I use, works better after your shower and dry off. Night and day difference

@jonc5152 Жыл бұрын

@@aglmechanicaltips This was my biggest issue.... I hate fiberglass.

@robbenoit6065 Жыл бұрын

He's an animal and it doesn't affect him👊