Intercooler Fabrication, Fuel System and Wiring, IT RUNS!

Рет қаралды 159,419

2 жыл бұрын

Today on The Skid Factory Woody & AL finish off Waynes 1984 Ford Falcon XE Wagon by fabricating some intercooler pipes, Wiring the ‪@haltech‬ elite2500 ECU and finalise the fuel system with a bunch of Raceworks and ‪@gfbvideos‬ goodies. Once everything's sorted it's ready for the First Start!
See You at SUMMERNATS!
summernats.oztix.com.au
gfb.com.au
raceworks.com.au
www.golebysparts.com.au
www.tuffmounts.com.au
hoppers.com.au
#FORD #FALCON #BARRA
Support us on Patreon: / theskidfactory
Buy merch here: www.theskidfactory.com
If you like what you see then Share it with your friends and don't forget to subscribe and hit the bell for Weekly episodes!
For updates keep your eye on The Skid Factory (TSF) here:
woodrigos?...
theskidfact...
/ theskidfactory
turboyodats...
/ theturboyoda
Please note: We like to make interesting car mods and show you how we've gone about it, but we can't promise that anything we show you will work for your particular car, or that you won't harm yourself, someone else, your car or your warranty doing it. Please be safe, be responsible and unless you know what you're doing, do not fool around with very serious machinery just because you've seen us make it look so easy.

Пікірлер: 311

@theskidfactory 2 жыл бұрын

Who’s coming to Summernats?

@rosscullen406 2 жыл бұрын

Fly me in from Florida mates!

@fossilfuelenthusiast 2 жыл бұрын

mind the hail!

@matthewwilkie7090 2 жыл бұрын

Have you guys got a merch tent?

@woodworker4063 2 жыл бұрын

No, because I didn’t put the booster in my body.

@jpkalishek4586 2 жыл бұрын

I'd try, but the 14,400 kilometres is a bit of a ride for me on my Honda ST1100

@mightycarmods 2 жыл бұрын

Love a good long roof 😍

@todd_harrison4500 2 жыл бұрын

I went from a 69 Mini to an 82 XE Falcon.......I regret selling both, but the XE more so 😔 absolutely loved that thing💙

@stevemcrichards8768 2 жыл бұрын

Shaggin' Wagon!

@tturi2 2 жыл бұрын

you love yourself a classic falc? there must be a disturbance in the multiverse

@anthonyf3253 2 жыл бұрын

Love a good long dooby too eh lads 😩😆

@robbie123robbie123 2 жыл бұрын

This is by far my favorite KZfaq channel, been watching since the start. I can't believe you guys haven't got 1M subs. I hope it happens this year for you guys! Happy 2022! 😊👍🍻

@rosscullen406 2 жыл бұрын

Same 💯

@TheMultiDouche 2 жыл бұрын

The only reason I can think of it is that the humour is quite dry and Australian in nature. Sometimes it doesn’t translate well, being an Australian though I love it.

@loganriechers8764 2 жыл бұрын

you mean YouCHube?

@ErnestHughes12344322 2 жыл бұрын

I had to look at subs and that's pretty unbelievable it's only 233k

@jarrodmostyn2656 2 жыл бұрын

It’d be heavily Australian audience and there’s not many of us unfortunately

@FuManchu5ltr 2 жыл бұрын

I bet heaps of us could have watched hours of Al making the loom and wiring. Would love to see more of it.

@salloroc20 2 жыл бұрын

My trick for pre-fab is to score the two parts through the tape with a bit of tungsten or something sharp, so when you pull the tape off to weld, the score marks are there. It's worked pretty ok so far!

@timbo7214 2 жыл бұрын

Genuinely love you guys, been here since the skid factory on MCM2 days. Happy new year, looking forward to another year of awesome content

@salzar4431 2 жыл бұрын

Vice grip pliers with a washer welded on one jaw and exhaust clamp on the other make a really good cheap bead “roller.”

@Jake_Hamlin 2 жыл бұрын

Laying some weld as a bead works too. Doesnt have to be a complete bead either

@LobbyDaLobster 2 жыл бұрын

I was like "Oh crap that sounds like a lawnmower! That's not good!" LoL

@Pablo668 2 жыл бұрын

Awesome build this one. It must be good to be a Ford guy right now with the Barra engine and good drivelines that you can put in almost any Ford that you have. Roger is getting big!

@greggee5695 2 жыл бұрын

Alan, I love your wiring jobs! They are so neat.

@nikolaybaldzhiev9623 2 жыл бұрын

Happy New Year dudes all the best in the new year and many new projects and excellent engine experience to us. Cheers from Bulgaria.

@Pacsuper7 2 жыл бұрын

Thanks for a great year! Happy New Year! Looking forward to seeing what 2022 brings.

@Dogfish47 2 жыл бұрын

Looking forward to some of the new builds coming this year!

@1ocean515 2 жыл бұрын

Thanks for the effort in 2021 boys! Looking forward to new projects, fun, and games! 👍👍

@emptycoffin 2 жыл бұрын

I'm pretty sure we all have, Hey? We all sub'd then they never really grew while we all sat there and wondered why

@fendel_ 2 жыл бұрын

Epic show as always! Love the Barra builds. Will be exciting to see it getting tuned. Good luck on Summernats!

@MrBigR928 Жыл бұрын

You got me in the beginning with that lawn mower! I gonna say geesh man what the hell happened? Hurry up & put some damn oil in it🤣👍🏿

@adamloader9534 2 жыл бұрын

Happy New Years guys. Have fun at Summer Nat's & enjoy your time off. We all look forward to seeing new builds in 2022🇦🇺👍

@newkindofviking6701 2 жыл бұрын

Perfect timing, actually. Happy new year! 🎉🎊💐❤️

@t0mn8r35 2 жыл бұрын

Very impressive how easily and smoothly it started up.

@someyoungguy6990 2 жыл бұрын

Happy new year fellas. Cheers to more shed skids!!!

@dennisfreebairn8754 2 жыл бұрын

Awesome to see you guys designing and manufacturing parts for vehicles. We’ll done

@flyinghoon 2 жыл бұрын

Happy New Years guys, Keep up the great work love the content, can’t wait to see what’s in store for 2022

@StratoJohn 2 жыл бұрын

Good stuff boys, here's to a new year and more awesome Skid Factory vids 👍🏻

@mattieflaps9222 2 жыл бұрын

thanks for a great year lads always make my Wednesdays better. keep up the good work!

@daviousmaximus6446 2 жыл бұрын

Thanks for the entertainment lads, Happy New Year to you too.

@frankgeimer5952 2 жыл бұрын

Thanks for all your content from down-under!! I love it!!

@skinfull 2 жыл бұрын

Still my favourite youtube channel - keep it coming lads! Happy New Year here's to a massive 2022 of big skids!

@nickgrech9634 2 жыл бұрын

Cheers for the awesome videos guys! Absolute legends

@davidvincent2051 2 жыл бұрын

Happy new year boys! Hey Woody where's the Fairlane? Have a great Summernats..

@davidbrown6193 2 жыл бұрын

Awesome! Cu at Summernats!!👍🏻👍🏻Happy New Year!! and all the best in 2022 👌🏻

@mynameis63 2 жыл бұрын

Hey...no ads. Thanks boys...enjoy your time off.

@leightonB69 2 жыл бұрын

Great work guys love watching the episodes gives me the motivation to go out and work on my cars patrol coming soon lol

@davidhiscock1969 2 жыл бұрын

Happy New Year from the UK gents 👍

@manythingslefttobuild 2 жыл бұрын

10:25 that's awesome Ford gave you a square recess in the trunk to work with, so much easier than mounting things in a round spare tyre shaped hole. Great build, looking forward to what's next.

@airbats801 2 жыл бұрын

When I was young n broke, but had a welder, I would toss some tacks on the end of the pipe to help prevent them from blowing off. It worked pretty good. Would have loved to have a bead roller. Great video guys!

@kimbarker9651 2 жыл бұрын

You guys have so much fun. Love the videos

@codymorrison7908 2 жыл бұрын

Happy New Year Alan & Woody

@boothbytcd6011 2 жыл бұрын

Happy New Year gentlemen (and gentlepup)

@philrogers2406 2 жыл бұрын

Happy new year guys!

@MookieZerang 2 жыл бұрын

You guys are the business. Algorithmic success to you and yours in the new plague year.

@0643052 2 жыл бұрын

happy new year guys!🤟 awesome content

@jimdieseldawg3435 2 жыл бұрын

Thou hath created the world’s first Barra-powered trombone. It’s even the right colour 😎 That’s going to sound epic with a tune and all that resonance. Nice 🤟🏼

@rjl110919581 2 жыл бұрын

THANK YOU FOR VIDEO HAPPY NEW YEAR

@lilbobbycustoms2747 2 жыл бұрын

Happy new year guys

@Flatsixerful 2 жыл бұрын

New beard looking good ! Thanks for these vids, looking forward to any EZ30 content again

@LeTessier916 2 жыл бұрын

@mits2113 2 жыл бұрын

Happy new year everyone

@mark7457 2 жыл бұрын

That lump... Tell Hoff to keep it. Have fun at the Nats Fellas. Looking forward to your angle on it.

@krispykruzer 2 жыл бұрын

good to see Woody in front of the camera ! and HNY fellas

@davidbeer 2 жыл бұрын

Talk about committed to the channel. Boxing day! Thanks for what you guys do. Amazing content, have a good well deserved rest-break.

@bobertbirkely 2 жыл бұрын

I would totally watch a full length video on you guys servicing that lawnmower.

@petelattimer6808 2 жыл бұрын

LOVE this car. reminds me so much of the mk2 Granadas we got here in Europe. i was a huge fan of them too!

@stevevesotsky6849 2 жыл бұрын

Just about coated my keyboard in nutmustard when i saw an XC ute on the lift behind the longroof!! Love the channel guys, a video a day wouldn't be enough :)

@benvanbaak 2 жыл бұрын

Haha nice intro friends, happy new year! 😁

@tonkaturbodiesel 2 жыл бұрын

Me: man my phone speaker sure has some lint, moisturiser and sand in it. That Barra sounds like a lawn tractor. Also me 5 seconds later: LOL

@tommy_kaira733 2 жыл бұрын

Happy new year uncle al and cousin woody..

@charlesketchum1398 2 жыл бұрын

Every time I see you guys put together another awesome Barra build it makes me bitter we never got that engine in the states.

@ryantilley-general.shenanigans 2 жыл бұрын

Grass is always greener I suppose. We are jealous of the LS varieties you guys got in the States.... and of the engines available in Japan and the cars and prices of cars available in New Zealand. But yeah the BARRA is a bit of a monster!

@daveurda8511 2 жыл бұрын

God damnit, got me good. I was like ohhh that sounds like a lawn mower...

@SebastianUllrich1990 2 жыл бұрын

That intro! Brilliant!

@stevenkirk2563 2 жыл бұрын

Nice setup.

@jimwinters2470 2 жыл бұрын

Good One (starting the mower)

@adman6380 2 жыл бұрын

Great stuff guys

@ozbusa 2 жыл бұрын

Listening to the video, looking at the XC ute, wondering what the story is with it. Half way thought, answer given. Looking forward to the new years builds :)

@tomanycooks 2 жыл бұрын

going to be a good year

@LeTessier916 2 жыл бұрын

Love the look of the XC on the hoist 🤔

@greenaddictiongarage3236 2 жыл бұрын

Man I love this show. Don't love how much money it makes me spend on my car though. Straight online after each episode.

@FuelBurnMedia 2 жыл бұрын

Outstanding work! And definitely will wipe the floor with my taxi spec Barra swapped XD wagon! Awesome 👏

@ianmansfield8885 2 жыл бұрын

awesome content happy new year...y I hr knowledge and skills astound me..both of you

@aaronhogan2371 2 жыл бұрын

Can't wait for the XC ute. I bought an XC GS 351 4 spd ute late last year. Clevo is tired and needs a freshen up.

@daviddench4036 2 жыл бұрын

Nice man I've got 2 xc 1 a gxl 302 the other is a falcon 500 with a tuff 351.

@Brock_Landers 2 жыл бұрын

Wow, seeing those pictures of the Haltech 2500 and the wiring harness just make me feel like my wiring jobs are shit compared to how Al works. His harnesses and custom mounting and wiring jobs are A-100! They look outstanding with the looming and heat shrink!

@terrybagatella3898 2 жыл бұрын

That sounds hot. Love it.!!

@grantvxr83 2 жыл бұрын

Shame there was not as much wiring footage, Al's wiring is 👌🏻 You guys are awesome enjoy your break 😎😎🥳

@Jeenzy79 2 жыл бұрын

Can't wait to see more on the XC

@nathanpeachs2704 2 жыл бұрын

the insta post, with the ride on was gold bothers 😂😂

@Dad-jk2wd 2 жыл бұрын

Sounds great

@Rtechmobile 2 жыл бұрын

Awesome stuff boys ! Longer eps would be mucho appreciated ( pain in the arse I know )

@nickfindsgold9788 2 жыл бұрын

Congrats on the Rode sponsorship Al 🤣😂😅 ive got to try that on the cap, audio is good and no shirt rustling noises

@RWB1111 2 жыл бұрын

Registering interest - Interested in one of these intakes!!

@R1SK0NER 2 жыл бұрын

Raceworks makes a good battery tray 👌

@eagle-qr9di 2 жыл бұрын

Time for a 🍋 squash Nice build guys

@fo82rd12 2 жыл бұрын

Glad you did a build series on this. What header tank is used in the XE? Need one for mine

@theskidfactory 2 жыл бұрын

It’s actually a 1968 Toyota crown header tank so not really something you will find easily

@chedhead3278 2 жыл бұрын

Thanks!

@MarkManson14 2 жыл бұрын

Barra the world!

@gsd1121 2 жыл бұрын

Happy new year fellas. Would it be possible to get the link to the catch can you used on this build? Love the car.

@BigPermGarage 2 жыл бұрын

Awesome to still run VCT!

@dennisfreebairn8754 2 жыл бұрын

Love XE’s. Picked up my dads one from him the other year for $1000. Scottish blood he never gives anything away. He’d had it for 24 years. I. The stages or procuring parts and then I’ll spend time modding. Things a good runner too. And I’m pretty good original shape

@chris425amp7 2 жыл бұрын

Nice lump an bit's 🔥

@Diffy87 2 жыл бұрын

That intro was . . . . EPIC

@ACCELGarage 2 жыл бұрын

Hi guys, great work as always. Are the fuel pumps internally check/non return valved? If not, you'll need them if staging the pumps.

@ThomasThorr 2 жыл бұрын

Please build the VG30 in the Z and make it a beast. Prove how spastic these engines can be. So underrated

@joshuabuckley7443 2 жыл бұрын

I was expecting more of a lumpy sound. A guy I met who has one in a gu patrol sounded like a rotary on idle. Was apparently tuned for 600hp at the time but was built for 1000hp+ but I can't wait to see a dyno vid and some street pulls !!

@yesnomaybe3372 2 жыл бұрын

He mentioned the cam can still be used with variable timing. That's why there isn't a lumpy idle.

@theskidfactory 2 жыл бұрын

That would have just been ghost cammed.

@adriancraig9012 2 жыл бұрын

Great work! Do you have a part no. for the E85 sensor bracket? Couldn’t find it on their site. Also the gear selector would that work on a different model auto and IC-7?

@Christmoore155655 2 жыл бұрын

you fellas built a nice didj

@MADTAS4 2 жыл бұрын

Happy new year guys. Paj's arnt cool.

@chrisbruton5937 2 жыл бұрын

Yes this an awsome channel to be on!!!!!!!!!..... So tell ya friends to get on board. Let's see if us viewers can get the lads to 1mil in 2022. 🍻 from Rochester Vic.

@chrisbruton5937 2 жыл бұрын

1mil f#$k it 1.5 sounds more like it. But while we're at it Nugget Garage, Benny's Custom Works, Built not bought Mighty Car Mods, Castlemaine Rod Shop, Rhone Dhal... think that's how 🤔 it's spelt. Anyways we have the best content.

@Fix_It_Again_Tony 2 жыл бұрын

Coolant pressure sensor is an interesting idea. What kind of failures can this spot? Head gasket, coolant leak? Anything else? You guys are killing it.

@joemomma12341 2 жыл бұрын

Headgasket issues as well as head sealing issues from lifting the head when you are at high boost/high timing.

@Synthetic-Chicken 2 жыл бұрын

Must be an old school thing using water pressure gauges to see if heads/cooling systems are pushing water. Even back when TD03 turbos were the ducks nuts, I had a tuning shop look at me sideways for having a water pressure gauge on my 95' GSR, that thing was pushing 400 at the wheels in the early turbo technology days.

@jahraizer250 2 жыл бұрын

I ❤ skid factory

@honestpat7789 2 жыл бұрын

Woody goes alright on the tig; he can weld my pipes anytime 😉

@rhyanm3668 2 жыл бұрын

see ya at canberra hopfully bud

@derJackistweg 2 жыл бұрын

Coolant pressure sensor : THAT is an interesting approach! never heard of that before. but very true. a blown head gasket, cooler etc would make a change on that. I guess. I an thinking of my expedition truck regarding that, also an application where you would want to know before it gets worse....

@theskidfactory 2 жыл бұрын

You can use logging to see if the head is lifting from the block. This can be for many reasons but is always bad.