Carnage - Building a Cheap 1000hp Barra!
Рет қаралды 64,470
Жыл бұрынAfter losing oil pressure in our stock bottom end Green Top, we decided to slap together this cheap Barra for boost.
Subscribe to Street Machine for V8-powered good times
secure.whichcar.com.au/street...
Street Machine is Australia’s number-one modified car magazine, bringing V8-powered good times since 1981.
We live for tough street cars, and the guys and girls who use them. Our channel features event coverage from all over Australia, including burnouts, drag racing, dyno competitions, show ’n’ shines and high-quality technical videos.
So follow along as we bring the magazine to life, and remember to check back regularly for new videos. www.streetmachine.com.au
Sign up to our free newsletter: www.whichcar.com.au/streetmac...
Facebook | streetmachinemagazine
Twitter | / streetmachine1
Instagram | / streetmachinemag
TikTok / streetmachinemag
Join the conversation: #streetmachinemag #streetmachinetv
@jenibond Жыл бұрын
Never seen Scotty move so fast since the Toxic avenger caught fire !!!
@s4ss.m8 Жыл бұрын
34:13 golden nugget of Scotty dropping an F bomb 🤣
@dizzyborden3618 Жыл бұрын
There you go Scotty.....You don't always have to have lots of "Carnage" in your episodes of Carnage, Just a basic informative vid on how to put together a motor, Brilliant effort and a great result 👍😃
@highpointsights Жыл бұрын
There's a guy in the States (nivlac 57) that's building a GM Vortec 4200 block (inline 6 & 4 valves per cylinder) with boost (he's just getting started) that he got 847 hp He had con rods and pistons!! Maybe we can have a Barra/Vortec shoot out?? My guess is he doesn't have near the budget that some cars have. I'm hoping he gets some serious sponsorship soon!
@RoB_666_ Жыл бұрын
Mentioned this to Scotty a while back....Calvin's been playing around and spearheading those engines for a while, definitely agree with ya on the sponsorship. The Vortec doesn't quite have the aftermarket support that the Barra enjoys now but it'd be an absolute riot seeing Scotty tearin' it up around the US in the mx5....
@MafiaboysWorld Жыл бұрын
Only one thing needs to be said Scotty: *Nothing beats a 2K Barra!* 😉👍
@jimclarke1108 Жыл бұрын
Great work Scotty, it's good to see assembly methods, and a great engine
@Beer_Dad1975 Жыл бұрын
Needed more use of the torque-shifter... 😀
@fullboost Жыл бұрын
If only I could post a pic of the great man - El Risitas
@STREETMACHINETV Жыл бұрын
$2k Barra for the win. When Telf asked what it was gonna cost I told him $2k and I wasn't wrong. Obviously that doesn't factor in the valve springs or oil pump gears which we already had.
@CRFLAus Жыл бұрын
Go Carnage! I went and saw the team at Hare & Forbes in Dandy and bought some nice tool boxes and tool chest. Great people to deal with. I support people who support great creators.
@kennethsmith3260 Жыл бұрын
awesome work Scotty, it's good watching the engine go together. can't wait to see it on the dyno.
@brushitoff503 Жыл бұрын
Awesome stuff Scotty! Hope ya got it all done & are at the Track sending it!
@jc7654 Жыл бұрын
great job Scotty lots going on, nothing like a deadline for interesting viewing 👍😁
@hillbilly2224 Жыл бұрын
Great information with the engine assembly I can’t wait to see it in the car on the dyno and the track 👍🤙🍻
@outwestgarage1277 Жыл бұрын
Thank you for all the tips and tricks to building a Barra
@darrenbyrne4622 Жыл бұрын
Hay what a way to finish the week with a kool vid from Scotty and ita about the Barramazda Awesome scotty cant wait for the next vid on this keep them coming man !
@dannyalmeida1015 Жыл бұрын
What a really good job Scotty!!!
@fossilfuelenthusiast Жыл бұрын
Hell yes this is awesome. Love a budget build.
@andrewvassallo3444 Жыл бұрын
Nice hone job , most slap togethers go good can't wait for the results
@MrJermbob Жыл бұрын
That hone job is epic. Love your videos.
@Dave-ru3tt Жыл бұрын
Really informative and interesting video- you know your stuff and explain things well- thank you!😉
@georgiougarage1617 Жыл бұрын
Good stuff Scotty.
@honestpat7789 Жыл бұрын
That assembly makes it very clear why no one bothers with the Holden v6 sidi motors. Simple with huge potential.& relatively cheap!
@Seeeeyaaaa Жыл бұрын
Ohh the old garage hone..there's a man after me own heart right there 👌😁
@jarrodmccudden4427 Жыл бұрын
I really hope this thing went together beautifully without any issues and made big hp can’t wait for future videos
@STREETMACHINETV Жыл бұрын
I don't want to give spoilers, but let's just say there's alot of win in the next two videos
@markbryan7960 Жыл бұрын
Your an automotive artist.... Been following your every move since 'Turbo Taxi' build..... I love when I get every notification that u have dropped another vid... Pls keep doing u..... so different but real...... love your work mate... shout out from NT........😁
@STREETMACHINETV Жыл бұрын
Thank you for the kind words mate
@hqlion Жыл бұрын
Good work there Scotty.
@jonteberryman5731 Жыл бұрын
More people need to watch Carnage! Bloody fantastic content Scotty
@STREETMACHINETV Жыл бұрын
Share it around with your friends
@rxcosmo76 Жыл бұрын
Nice Work Scotty.
@michaelb5330 Жыл бұрын
Good stuff Scotty
@sterlingwilkey2124 Жыл бұрын
Awesome video scotty
@JohnLee-vj9lh Жыл бұрын
Good to see Scotty you going for some nice HP ,
@HORiSTYLZ 6 ай бұрын
Would have to say these barra engines are. bloody good to lern how to build a inline 6. nice build scotty
@akriminal7951 Жыл бұрын
I've got no doubt in my mind that thing is going to rip, don't worry about comment know it all's you do real well, keep it going love to watch
@LRogan520 Жыл бұрын
You must know the Barra inside and out ..nice seeing it come together.
@lelchookmark4822 Жыл бұрын
Im building my 1st Barra and it will be similar, I bought some .001 over pistons and rods from Spool, it will get honed, and ill check the deck to see if it needs a surface. Love this engine, im in the US by the way. Thanks for the video.
@slipslop7156 Жыл бұрын
Awesome video 👍
@namoijzoiuy9986 Жыл бұрын
Classic scotty good laugh n content
@johnrebelos2221 Жыл бұрын
In the next episode, can you get a random piece of hose and... hassan chop! I miss hassan chop 😭
@ishakespeare3898 Жыл бұрын
Awesome, such an informative thing to watch. Feel like getting my own Barra now 😅🤞
@STREETMACHINETV Жыл бұрын
Thanks mate
@biastv1234 Жыл бұрын
Great stuff
@rogersford1 Жыл бұрын
Awesome build Scotty love these videos 👌🏻 I just built the same thing with my Barra turbo 👍 factory turbo pistons ceramic coated with spool h beam rods Hastings rings and ACL race bearings and boundary pump gears and atomic timing kit with stock tensioner crow cams valve springs ARP headstuds and flywheel bolts currently on 301kw on run in tune just about to do a full send tune on 98 and e85 tune on maxx performances old dyno now at Mackay customz in Tassie 🤙🏻
@choedlord1758 Жыл бұрын
Love the vids❤️
@Doc_in_the_carpet_truck Жыл бұрын
Top work Scotty can't wait to see KW numbers on the dyno I'll go the number of the beast 666kw🤣👍🍻
@BigPhatPartyGuy Жыл бұрын
Coz Carnage! Love this
@ioijiopjkiopjkp Жыл бұрын
This was a bloody good watch
@STREETMACHINETV Жыл бұрын
Thank you, make sure watch the racing video
@markbryan7960 Жыл бұрын
Your work is like watching a painter making ART....
@ebay4dave Жыл бұрын
2K Barra here we come
@ReedyCreek28 Жыл бұрын
Hey Scottie, i absolutely love watching you tinker away in the workshop, what is the best way to follow your day to day achievements (FB or Instagram etc)
@dirtymuleracing5321 Жыл бұрын
Love your work mate…..
@DodgyBrothersEngineering Жыл бұрын
You scared the shit out me there for a second. I thought from the way the video looked you were checking all of the rings in the same bore. Phew!!!, thank goodness he is checking rings in another bore. Heart can start beating again.
@STREETMACHINETV Жыл бұрын
I'm dodgy but not that dodgy
@DodgyBrothersEngineering Жыл бұрын
@@STREETMACHINETV some of the things you see on KZfaq are down right scary. I figured you knew better, but just the way the video was shot looked like you did numerous rings on that one bore. I was going WTF!!! then the video of you doing the next one. Phew... Do you match pistons to bores? Don't think I have ever seen you do that in any of your videos. Some might think it is over kill but I like to match the biggest piston to the biggest bore and work my way down to the smallest / smallest.
@STREETMACHINETV Жыл бұрын
@@DodgyBrothersEngineering I'll admit I didn't bother trying to match pistons to bores
@nathanway20690 Жыл бұрын
Awesome work. I did this as well. But i used the spool rebuild kit with stock size cp pistons
@STREETMACHINETV Жыл бұрын
How did it go?
@zappy7393 Жыл бұрын
You built an engine in 35min! :P Smashed it out Scotty, hope she holds together.
@STREETMACHINETV Жыл бұрын
At this point it's done a stack of dyno runs and seven passes down the track, so I'll call that a win
@itsHydrahh Жыл бұрын
@@STREETMACHINETV cant wait to see the results
@ChristopherHallett Жыл бұрын
The only thing Bubba breaks is hearts!
@George-lh4jo Жыл бұрын
Barra is the way
@turboborg Жыл бұрын
Getting good at that Scotty! Glad that went together hassle free! Make sure to double check oil pressure relief torque ;) Pleasure to watch.
@ChristopherHallett Жыл бұрын
I'd have used Loctite AND lock-wired the bastard thing after last time...
@MrHarvey1301 Жыл бұрын
scotty getting it done
@ethanburgess8355 Жыл бұрын
The " But Race Engine😊" did it for me ahahaha
@paule4204 Жыл бұрын
Scotty next engine build can you use a big shifter on the head studs and edit in the torque wrench click sound. It will generate some great conversations in the comment section.🤣
@stompnlocktheaucrew9544 Жыл бұрын
I like how Scotty and even the bloke at dandy engines both have one of them piston installing hammers with the extended head and they still bang them in with the handle 😂😂😂
@cdh76 Жыл бұрын
Good stuff. Better under time pressure :) BTW: Just a 10000th (not of a thou)...
@seanb250 Жыл бұрын
Keen to see the results 👍 I’m secretly hoping you tried some different TB orientation on the dyno 😁
@STREETMACHINETV Жыл бұрын
We shot all this in the same week, Diagnosis, Build, Dyno, Race. But I will orientate the throttle body now that I know it's an issue
@seanb250 Жыл бұрын
@@STREETMACHINETV fair enough Scotty, you have been flat out. Let’s us know what you find when you get around to doing it 👍
@driver3025 Жыл бұрын
A roofing square with some flat bar tacked onto it may be a better alternative to that small honing guide your using bruv.
@Aaronkt Жыл бұрын
This is inspiring me to get back out in the shed and put the LS for my VX SS back together , also makes me wish I had put a Barra in it . Am sure the Barra would have been cheaper and LS1 blocks (I had to find a replacement) seem to be getting hard to find.
@STREETMACHINETV Жыл бұрын
Is engines are getting expensive. We'll probably do another LS build using one of our blocks in the next 12 months or so
@Name-yp3pi Жыл бұрын
junkyard 4.8 is cheaper than both
@STREETMACHINETV Жыл бұрын
@@Name-yp3pi not available in Australia
@Name-yp3pi Жыл бұрын
@@STREETMACHINETV here’s a build here plus i used to have one myself kzfaq.info/get/bejne/m5yirLiczLjWcmQ.html
@kramrollin69 Жыл бұрын
Mmm Street Machine still around since 1981. Do you get special points if you bought "Van Wheels" in the 70s too? Where is my free T shirt!!. RIP Geoff Paradise (and now Chick.). Im not getting old...still 21 inside!! Still here from the beginning.✌
@STREETMACHINETV Жыл бұрын
Thanks for the support
@4ndy530 Жыл бұрын
Good luck mate, hopefully you don't send those rods to the moon! 👍
@Tuilaione Жыл бұрын
🙏🏾🙏🏾🙏🏾💪🏾💪🏾💪🏾... Barra Love
@alexmann3309 Жыл бұрын
360 degree thrust is definitely run in the barra’s. All ACL and other decent bearing companies come with double thrust bearings. Glad to see the mx5 coming back.
@STREETMACHINETV Жыл бұрын
Not from factory they don't
@alexmann3309 Жыл бұрын
@@STREETMACHINETV yes obviously not from factory, however it’s a routine upgrade with any upgraded bearings and virtually essential with a powerglide/t400 converters pressure.
@BobbyMcBoost Жыл бұрын
Will be good to see what she can do! Might need more than 25psi though 💨the old rattle gun harmonic install,, have seen multiple barra key way's crack from this. 🙈
@STREETMACHINETV Жыл бұрын
It will need more than 25psi to make 1000hp at the crank
@1993kawasaki Жыл бұрын
@23:40 you are lucky the Kt26's never got drenched in oil
@onedayiwillmakesomecontent Жыл бұрын
For your vice, if you cut up some 90 degree aluminium angle, instant "soft jaws". A lot better than the old rag.
@STREETMACHINETV Жыл бұрын
I have soft jaws
@davidbarnsley8486 Жыл бұрын
Can’t wait for the next one I tried rebuilding my Gemini engine because it rattled a little So I did rebuild it but it still rattled ☹️ It didn’t leak so much 😂😂
@tony66au Жыл бұрын
Only with a Barra can you do a single episode dunny brush hone and build, Yeah I know it was a wet stone hone but I like saying Dunny Brush :-) I reckon the original converter push crank shift worry came from the old "Hemi" 6 Cam walk days when the oil pump drive would fall off the end of the cam...... Do it once and it haunts you.
@PaddyBoy644 Жыл бұрын
33:40 You’ve got no excuse anymore Scotty that horrible green rocker covers got to go!!!!😜
@barra245t2 Жыл бұрын
Loose is fast,lessh gooo baby
@HoonTV Жыл бұрын
Slappy Gilmore :P
@STREETMACHINETV Жыл бұрын
Some times you just have to send it
@MichealAEdwards Жыл бұрын
Nice vid, how many cheaps was it to get to this stage?
@highpointsights Жыл бұрын
Appreciate the "imperial"numbers ('thou")!!
@mun33y Жыл бұрын
That 6.4l hemi in the background 😉
@STREETMACHINETV Жыл бұрын
I know, it looks lonely. Might find a home for it
@mun33y Жыл бұрын
One does not buy a 6.4l hemi and gearbox without a plan ..hmm ..do tell Scotty 😉😉
@kylebutler7142 Жыл бұрын
@@mun33y I may be wrong but it's destined for the L-Word wagon?
@XA393GT Жыл бұрын
Awesome to see! One question, where did you get the fg pistons from?
@STREETMACHINETV Жыл бұрын
Maxx Performance had them
@talesfromthebottle6314 Жыл бұрын
It's pretty amazing that you can just shoot the parts cannon at a motor these days and make stupid power. Gone are the days of die grinding for months on end to make an extra 2 HP
@STREETMACHINETV Жыл бұрын
Exactly, these engines are ridiculous
@davydoo81 Жыл бұрын
A lot of it has to do with the engine management systems we have now. I remember back in 2000 someone built a turbo’ed AU, cost heaps and the best they got was 250rwkws using an old Motec.
@ut2k4wikichici Жыл бұрын
Mint
@matgee8892 Жыл бұрын
"It wasn't Bubba at all, he didn't break anything" No sentence has ever been less true. As long as Bubba exist,s somethings getting broken.
@78910milo Жыл бұрын
That’s a long hammer you have there!
@robertsmith7854 Жыл бұрын
Hemi hiding in the background 😯
@dinosshed Жыл бұрын
I like how you're listening to the crowd. Jam that thing into the eights and lift that front end into the sky!
@jase666ify Жыл бұрын
Nice work, I thought you could run bottom main bearings on top aswell to give you 360° thrust or do you need machine work to do that?
@STREETMACHINETV Жыл бұрын
You would have to machine the cap for that
@guyharrison909 Жыл бұрын
Don't let bubba near it!
@TheTigerQuoll Жыл бұрын
Does this mean that Bubba gets a shot at the new build?
@ILLUSIVE1 Жыл бұрын
Anybody notice the 6.4l hemi in the background?? Twin turbo
@panelvanman7671 Жыл бұрын
nice one Scotty , your only weak link now should be the driver
@STREETMACHINETV Жыл бұрын
For a slap together job it goes alright
@honestpat7789 Жыл бұрын
1000hp? I think you’re gonna need a bigger boat!
@bluecent Жыл бұрын
Into a Century or early Commodore !
@zachs8652 Жыл бұрын
Scotty that 904 will bolt up to that 6.4 hemi… just saying, you put that shift kit in pops transmission lets send it down the track with a hemi. Haha I know it is for a lockdown project but that engine is so close to the ute right now.
@STREETMACHINETV Жыл бұрын
Haha, nah Dad was a carby guy
@zachs8652 Жыл бұрын
They have carburetor intakes for them too. Haha
@xozindustries7451 Жыл бұрын
If you put some grease on that engine stand it will roll the motors over easier
@STREETMACHINETV Жыл бұрын
Yeah, but I don't want it moving too freely
@itsHydrahh Жыл бұрын
barra the world
@kevinallston1124 Жыл бұрын
F#k yea I have a sticker on the front window of my xr6 #barratheworld
@abh13795 11 ай бұрын
Did u use arp main studs without line honing the mains ?
@STREETMACHINETV 11 ай бұрын
Yep, but measured the clearances. Budget build!
@justgjt Жыл бұрын
Question: Any reason why you would not opt for a heavier windage tray over the standard one ?
@STREETMACHINETV Жыл бұрын
The windage tray is heavy enough, if you're talking crank girdle then I think that for 1000hp+ engines and for those you would build them with alot more care than we have used here
@rossyfarming6238 Жыл бұрын
Send it scotty
@xozindustries7451 Жыл бұрын
Are those forged pistons? No need to rebalance the motor?
@STREETMACHINETV Жыл бұрын
Factory turbo pistons, and inline six isn't as sensitive to balance as a v8 or v6
@DeL8r Жыл бұрын
hey scotty what timing chain kit did you use? or was it a factory set? ive got a green top (healthy 120xxx kms bf mk2) that im aiming for 350-400rwkw and wondering if i should spend the 650 on an atomic kit or if it will be fine
@STREETMACHINETV Жыл бұрын
Factory chain
@DeL8r Жыл бұрын
@@STREETMACHINETV thankyou
@ProductofNZ Жыл бұрын
What are the Pros/Cons of a Bara compared with the 2J or RB?
@STREETMACHINETV Жыл бұрын
That's a big conversation.
Garena Free Fire Global
Рет қаралды 35 МЛН
STREETMACHINETV
Рет қаралды 53 М.
Clay Wong
Рет қаралды 37 М.
BUILT DIESEL MAFIA
Рет қаралды 4,3 МЛН
Mountain Mafia
Рет қаралды 2,2 МЛН