Awesome! Thanks for the content. Can't wait to see these hit the market and find a way to get one. Was trying to figure out how many older tile saws I could sell to afford this one lol.

If I was to ever buy a saw to keep for life this would be it!! I've demoed the 10" & it's a beast!! This one would last me for life!! Hoping all is well Liggy Landberg!! Dirty Jersey out!!

Man I am so ready for that to hit the market I need one

I dig it,defiantly getting one👍🏼

You have a temple of tile guys toys... nice 👍 I would like to try one before buying.

GO BERG!🔥🔥🔥🔥

Great review, awesome saw. I’m really impressed with the way it controls the dust and makes clean cuts.

I bought the Porter Cable tabletop on your recommendation. Great little saw, uses water, very little over spray.

Would be great to see you cut a 24inch tile length way on that saw as mainly the standard size tile in UK

Hey the cyclone gets the air spinning and helps drop the heavy particles downward 👍🏼

Mine is supposed to be here next week. Super excited. Thanks buddy for the review. I trust your opinion

Finally "saw" this on Amazon for $650. Really considering getting it soon.

Thanks a lot!

Game changer !!!

Hi whats the best wet saw a dewalt or a iq? Do you think a dewalt or a bridge rail saw is better for cutting 4ft long plank tiles. Love your videos.... you and your wing man do lovely work I must say. Stunning

Came with the orange blade chips porc big time boss.

Great video!! Love the cuts and can't wait to see part 2! The saw will retail at $599 and will be available for pre-order Jan 1, 2021.

I have the10inch IQ and I honestly wind up spending a lot of time cleaning up my cuts. It does not cut porcelain clean. Great idea but they need to figure out how to design a blade that can cut porcelain tile clean. Also the mitre design not good either. Got to stick to wet tile saws.

I'm assuming this is not going to be a consumer item (cost??)? As an aside, I bought a corded Porter Cable table top tile saw based on your recommendations to do a bathroom floor install, and it worked out so well I've decided to re-tile the kitchen and family room areas. That saw is good value to say the least.

That looks like a new toy coming to my work truck perfect for mybhigh end remodeling business

I have the iq244ts. I bought the porter cable table top saw for doing glass. I’ll be curious how well this does. Maybe I’ll sell the big one.

Looks like a cool one!! Landberg, have you gotten in touch with Manuel from Buffalo Tile?? He has the IQ 10” and it’s giving him grief with chipping.

Just got one today although my sliding table isn't flush with the stationary side I'm hoping there's a way to adjust it

Looks pretty good, can it cut out a sqaure in the middle of a tile, for like an outlet or shower head?

I've got the 10 inch full size IQ saw I use it occasionally it has a time and a place but I will say I have nothing bad to say about it. The saw cuts true straight lines and I've used it in finished houses quite a few times with no issues

JEALOUS!!!!

What is the advantage of this over a manual tile saw. Both no mess, but this seems less convenient. Other than for the very odd cuts. Would you feel comfortable using this saw with no masking in a clients house?

My boss just got and it awesome for backsplashes no need for the wetsaw

I have the 10 “ version and it has severe problems with the tray bouncing/ sticking during the cut. I bet the warranty won’t cover it since I have tried to use it “as is”.

Awesome!!! Can’t wait to find out the cost.

Sold me on it. Going to Hanks specialties to buy one RIGHT now!

Landburg how does the end of the cut look does it break was a concern of mine. But love the small type can bring saw in shower.

@landberg tile tv .. can we attach a vacuum hose for this one like we can to the Other IQ saw??? Thanks!

WOW! That is incredible! I just purchased the Porter Cable wet saw you reviewed and loved it, but this is SPECTACULAR! What will the price be for this saw? Also, i keep having my tile crack and spit at the end, and am not sure what to do. I believe you had mentioned that i should purchase a different blade rather then use the one the came with the saw, but is this chipping happening because i have something setup wrong? I’d love a video for techniques that help folks use a saw better and prevent these type of issues. Also, I honestly have no idea how to tell when a blade should be replaced. Thanks for the great content!

I love the IQ saws ability to cut dry. But one question how does it do on glass, it would seem to me without the cooling of water that the glass would chip a lot. What is your opinion on cutting glass with the large IQ that you own. Thanks again for all your videos they are very informative.”FLIP”

This has come on my header page again...2 years later I wonder how the reviews hold up. Personally Ive been less than pleased with any of the results Ive seen and I know 2 people that bought this saw and sold it 3 months later as it was less tahn adequate for the price...Thoughts.

Beautiful machine. I love it. Finally, an iq that is reasonably priced. It is on Backorder for some time now. I will bet you any amount of money that this company will raise the cost by at least 30%. It's just who they are.

Have you cut natural stone tile like msi stacked stone?

Hope there is some mosaic tile on part 2. Water kills the backing and snap cutters can be a pain, depending on the size of the mosaic.

Any idea of a ruff price tag?

What’s the depth of the cut you can make? Would it cut a 2 1/2” paver

at 9:08 , where did that big chip come from?

I can only imagine that it is loud as heck. What are the decibel levels when cutting porcelain 1\2" tile?

Where you get those knives?

How do you like this saw after 1 year?

Why they don't use the standard 7inc diamond blade? 😢

I agree, it should be very helpful with backsplashes, but most of backsplashes I did lately is glass tile. Did anybody try cut glass tile with this saw?

Am I the only one who thinks the $600 price tag is nuts for this amount of plastic? $600 can get me a Bosch table saw with a heck of a nice stand. This comes with no stand. The idea is fantastic. But seems like the Gemini saw. The owner had a fantastic idea and the patients on it. Never increased quality trying to keep the most profit.

After using this saw for a wile do u reccomend buying one? I'm not sure if I should get it or not

Hello my tile master! Hehe sorry for bothering you. I have a question about that saw. I watched almost every movie that you published ... sometimes I watch it too many because I’m just spending money on things that you are reviewing. I bought that saw. I was waiting 2 months to get it and it’s finally arrived. I was very excited! To be honest when I unpacked it and assemble it I watched your movie again and I was thinking that we don’t have the same saws.... my device has 1/4 inch of play tray that’s for $650 with tax is ridiculous. In our profession we need accurate and in my opinion 1/8” difference is big thing. What is your saw play tray? My microajustment is very poor quality, when I’m moving that screw I’m scared to not break it. My tray is very poor quality too. It’s mix cheep metal with cheap plastic. I can agree about the motor. It sounds and feels very strong. I didn’t try it yet because I’m considering to return that junk without paying return fees. But I’m very curious about your example. I think that you could received better versions that they selling now because they knew and want your review! Have a great weekend!

@Landberg Tile TV; Hey, I noticed you were so excited to unbox the saw, you were out of breath. Just concerned. Stay healthy my friend. We like watching your videos.

A dry saw would be perfect for mosaics. They fall off the mat when they get wet but this saw has no chop so how would it do cutting mosaics?

Have a question for everyone or however wants to respond. What is a good tile tools box? That can hold Different spacers and also your tiling tools.

hallo, mochte den Werzeug zu kaufen. Wie.

Witch one is better Iq Cyclone or Porter Cable? I want to get one for my husband for Christmas ☃️

Is it loud as any normal tile saw?

Can this saw cut ledge stone ??

Like the corners, it didn't dull the corners out when you're pushing it through or it didn't separate the tile like it didn't make it. Go to you know a quarter inch more on one side. I would probably say that's better for more. Just the ceramic subway tile. I don't know man. Still not impressed. I only saw one cut

Hmmm... It's def not a Lambo, more like a Bugatti? Anyone else get the feeling that he's prob referring more to the price of the saw than it's build quality??? I mean, Hyper cars aren't really known for their quality & reliability after all... The new Bugatti def costs 10x more than a new Lambo though 👍 Appreciate all the reviews, keep em comin✌

I'm just not fully impressed with any tile saw out there. Seems as if each one has their own personal flaws. I can't decide which flaw means the least to me and if the flaw is worth the extra money or if I should just get another Ridgid and save some money. Trying to stay under 1000.oo usd. Might get the Ridgid 8" and the table top 7" and still be just under 1000 bucks for two saws. Debating on the Skil Hydrolock or Ridgid tabletop.

$52,000 lol I have the dustless wet saw cost me two truck payments lol

I think tabletop saws are only good for small subway tiles....You're better off using a bigger and more powerful saw with 12 x 12s and bigger tiles. A snap cutter is always faster for straight cuts regardless of tile size. This saw can be handy for a backsplash....Just set it right there next to you.

Hallo kan ich das auch ihn deutschland kaufen

Should of checked to see if it cut straight

Soooo you want to send that my way?! Hahaha

Where is part 2? Damnit!

Hopefully better than the bigger one. Terrible cut quality and it goes through blades! Mine ended up just sitting in the garage!

Send me one. 😅

You couldn’t use in a customers house due to the noise so if your outside you might as well just set your wet saw up then you don’t need special blades

I wish you didn’t have to use there own blades. Would be great if you could put your favorite blades but this is a great saw nonetheless

9:07 9:10 you can see it, chip the tile, idk if that's you or the tool...

Grout looking pretty bad there lol

What a poorass review man. Damn it! Big ass chip too on the white ceramic and you’re trying to hide it

I prefer my ridgid wet saw

Are you saying "vantastic"?

How does this saw possibly cool down a hard dense porcelain tile.....I’d never buy one of these things

To bad the blade doesn’t tilt for 45 miter

Looks like it takes a while to cut

Good to speed up the video when cutting or it would have been a lllloooonnnnggg video!! Nice concept , but time is money!!

Kind of hard to believe. Back cutting always leaves chatter.

Is it me or is this really slooow? Neat tool though.

Wow that is a fail . Sorry to say but I would not buy that thing. You do a great job man 👍

Really appreciate the reviews,, BUT dude, they are SO basic. Give us more spec's and details. - How many amps, or watts is the motor ? - What type of blade ? ("proprietary" , LOL) - Did you notice this has a small extended "thumb" on the back fence ? That will put even pressure on the opposite side of the cut, Brilliant ! That should stop tile from cracking and/or, blowing out the last piece of the cut. - How hard is it to change the filter ? - Are the feet rubber or plastic ? - what will it cost ? - when is it expected to be available ?

That saw sucks! I bought one shortly after release and it was sent back to the company because it was chewing up all the edges and cracking on nearly 1/3 of the cuts. The replacement was just as shitty and it’s been sitting in the box unused for over a year now.

Love the videos but not the same music in every one! Saw is slow as shit

Lol straight cut I use tile cutter.... For this price no mitre cut is just joke....

My first impression is that is home owner junk.

I can literally see the dust you are saying is not there????

ok - at $1200.00 for the unit and $250 for blade, I think I WILL stay with the dusty, watery cutters and keep my $1000 in my pocket.

To me looks like dustless means you get dust. Like waterless dustless you think you could cut on the kitchen table! Big words no product!

To much technology and no 45 cuts 😠

After 2 cuts all saw in dust He said no dust Дерьмо

Don't buy this tile saw, super bad cuts on marble

Not bueno, blade will not last.

This is not a truly review, it is an pathetic advertising.

getting paid to review any product is going to be 100% biased

it's annoying the way you speak....I know I'm not the only one who feels this way