Lol 😂, thanks man 🙏🏼 really appreciate it

Yeah I was actually surprised on how much I actually liked it when I first bought it

@@jcard959 if you get some time, could you a short vid using the seat instead of the bench to show the pros and the cons?

@@XxGranddudexX I actually no longer own it anymore. Sorry about that

@@jcard959 then that kinda tells me what I need to know. Nice to have but the bang probably not worth the buck! 😀

Lol, it’s practically pre assembled already, just have to put the wheels on

I found most most of my attachments on OfferUp

@@jcard959 got it, thanks!

The bench, and low row foot plate. And the rest of the attachments I bought on offer up

@@jcard959 got it! Thanks for the response. I have the bench and have been thinking about the tower. As for the attachments you mentioned, are they just all grip-based attachments (rope, etc.) or did you get anything for the tower itself?

@@jamestonbellajo grip based, tho only thing that comes with the tower is the lat pull down attachment and also an extension chain

I know im randomly asking but does anybody know a tool to log back into an Instagram account..? I stupidly forgot the password. I love any tricks you can give me!

@Abdullah Gideon thanks for your reply. I got to the site through google and im in the hacking process atm. Takes quite some time so I will get back to you later when my account password hopefully is recovered.

Thank you, and the bench has to be purchased separately

AJ Faith & Fitness so far they’ve been great, I’ve been using ironmaster equipment for a while now and really enjoy there stuff. I’ve had most of there equipment already.

It’s smooth, even at its heaviest, and it gets heavy quick since it’s 1:1 ratio

I still use the bench but I did sell the cable tower a while back

@@jcard959 May I ask why? I mean, did you move on to something else or was it that the type of exercises the equipment is used for no longer served a purpose? 😶

@@alphaomega1351 I got an inspire Fitness scs Smith machine and it had everything the cable tower could do so there was no point of keeping it.

Its probably because they have the super bench which is about 21 inches from the ground. I have it along with the v2 tower and its exactly that high as far as mine goes. Im 5'10 and its more than enough for me.The pro bench thats shown in this video is about 17 inches off the ground. So getting the pro bench will get you 4 inches more play.

@@DoritosResidue Thanks for your response. I already have a bench from outside the Ironmaster universe, so I would prefer to get the seat attachment rather than one of the superbenches. The seat is the same height as the original super bench, so it is more like 20 or 21 inches high. I am just under 6'0" with arms that are slightly longer than usual. Do you think that the extra five or six inches (three or four inches of additional height of the seat plus two inches of additional height of me) will eliminate resistance at the beginning/top of the lat pull? From your video, it looks like it will be close. I appreciate your thoughts on this. Thanks.

I’m 6 feet tall and have no problem with full range of motion although I do have the super bench pro. I am planning on getting the seat attachment once it’s available and will let you know if i still have the full range of motion with it.

I have the seat also . I just measured it and its 1 inch shorter in height compared to my super bench. Its not as stable as using the bench for the v2 tower. But very little wobble. I just keep it attached to the hyper extension attachment. Hope that helps

@@jcard959I'm not sure the seat fit the v2 tower with adaptor that makes the connection lower for the pro bench....I looked at my seat and there's no way to make it lower. Maybe there's an adapter?

So far yes, haven’t had any issues with it , it’s only stable with the bench attached to it tho, I do plan to buy the seat attachment once it’s available to see if it’s the same amount of stable.

You said the you received the seat. How is the stability of the tower with the seat attached as compared to the stability with the super bench attached? Thanks.

@@tomjones8235 it does lose a little stability but still very stable

@@jcard959 Thanks.

The row foot plate, the pull down bar, and the bench are ironmaster. The other attachments are not

Depends on how you have everything set up, I think you could go from benching to last pull Downs without having to disconnect the bench

I don’t think so , it’d have to be really light weight

Do not do this, it will tip.

I recently sold it because I got the inspire Ft2 but it’s definitely a great machine, very compact and easy to use. Also gets heavy quick, but yeah I’d definitely recommend it

I’ve had mine for 4 years, it’s a great home piece and I’m used to commercial equipment. Purchase the cable tower seat and you’ll have a stand alone lat tower for about $500 with a very small footprint. It feels like true 1:1 weight which is good, smooth for how simple it is.

@@TurboGuy979 thanks for the info! Yea I already purchased the cable tower and have it installed. Unfortunately the cable tower seat is out of stock. So just waiting on that and I’ll be set!

@@TurboGuy979 so I don't need the bench? What if I decide to purchase the bench? Will it be to cumbersome to keep disconnecting and reconnecting it let say if u are doing bech pressing and rigjt after lat pull down or low rows?

@@futbol1972 I would recommend the cable tower seat as it is very easy to add/remove and takes up ALOT less space. Before the seat came out though, I was using the super bench. Although it worked fine it became a little annoying and cumbersome to attach/detach in a small room. If you don’t mind that, then the super bench will work just fine. If you have the room, buy the cable tower seat and make it a permanent stand alone cable tower. I still have to remove mine when not in use because of space constraints.

Yeah I’d recommend it, and they only sell the V2, but the V2 is better anyways, the v1 you have to switch the cables around when going from high pulley to low pulley

@@jcard959 Did you buy the foot plate or did it come with the tower?

@@pedrog5846 I bought it separately

It’s also 1:1, gets heavy quick

@@jcard959 nice, thanks 👍 ironmaster should pay you for this video

@@WeiLiu87 thanks appreciate that

It depends when you bought the cable tower, I bought mine last year and they make it so it works for both super bench and super bench pro. But if you have the older model cable tower they do sell a mod attachment

www.ironmaster.com/products/cable-tower-universal-bench-connector/

Yes, the ironmaster super bench PRO does come with wheels. The ironmaster super bench does not.

I’m 6 feet tall and yes I do

No you would have to remove the cable tower to change the angle of the bench

@@jcard959 Thank you

Yeah it’s better with the seat attachment

I personally really liked it and thought it was worth buying, I only sold it because I ended up getting the inspire Ft2 and that machine already has a lat pulldown and low row attachment

@@jcard959 Thanks for the info. I have a superbench and like the idea, but it seemed a little expensive so I've never could get myself to buy one.

It is 16 inches

@@jcard959 thank you. I have the ironmaster cable tower V2 unit and was trying to ascertain how to perform the single arm lateral raises you demonstrated in this video without the weight carriage hitting the top of unit. Hopefully an extension chain will work to address the ROM issue. Thanks again.

No problem.

I’m not sure to be honest, my brother-in-law used it and he’s 6’3 and he had no problem with it, but 6’5 might just be a bit to tall for this machine. You could ask the company by sending them an email just to make sure

19" wide x 22" long x 86" high

@@jcard959 Thank you for your quick reply. I might just get the lat pulldown tower with the cable tower seat (instead of the super bench pro). Is it stable while doing seated rows? (with the cable tower seat attached on the other side). Thanks again.

Yeah it’s still stable

For me it’s good but I’m 6 feet so yeah you might have trouble with it being too short

@@jcard959 I see. Would it be too much to ask if you could measure the distance from the bench up to the pulley or/and to the lat pull grip/bar (preferably about shoulder width since that part of the bar is a little higher up)? I also have the super bench pro, so if I know that, I can then get a sense of if the lat pulldown will work for me. Sorry if it is asking too much...

No problem, I just measured it right now and it is 64 inches (5ft 4 inches) from the bench to the lat pull attachment.

Thanks!

@@jcard959 Just to clarify, is it 64 inches to the bar or to the pulley?

During this video I had sold my IM 2000 but yeah if you have the IM2000 then you don’t need the cable tower

@@jcard959 any regrets in selling it? Been contemplating purchasing it for a while now, legpress plate is a nice touch

Yeah I ended kinda regretting it after a while.

Yes they do sell a seat attachment you could use instead

Yes 2:24

Okay, I see. Are you supporting your back with something? Thanjs

www.ironmaster.com/products/cable-tower-seat/

@@jcard959 I saw that one but when you were doing the rows you were separated from the upright bar a good distance.

www.ironmaster.com/products/low-row-foot-plate/

This was the only other attachment I was using in the video, and I had the cable tower connected to the super bench pro

@@jcard959 You da man! Thanks!

No, you just need the super bench or the super bench pro. Or there’s also a seat attachment they sell for the cable tower. But you don’t need to anchor it

@@jcard959 thank you .

For the v1 you have to undo the cables in order to set it up from low pulley to high pulley. The V2 you don’t have to do all that

Yeah I sold it

@@jcard959 man I think I hit you up about it on offer up. Your like around rialto right? I sold mine also and was asking about offers you were getting. I recognized the pics corresponding to your vids

Yeah that’s right I remember lol

@@jcard959 did you end up getting the ft2?

No I actually got the scs smith cage, but I also recently sold it.

Yes you can

@@jcard959 Cool, thank you

www.ironmaster.com/products/cable-tower-attachment-v2-lat-system/?Category_Code=2

I bought it on there website. Ironmaster.com

No that wouldn’t workout