Ironmaster Super Bench Pro 30 Day Review
Рет қаралды 18,188
Күн бұрынTry the GamerBody free workout program: gamerbody.com
Equipment:
► Ironmaster Super Bench Pro: www.ironmaster.com/products/s...
► Pull-Up Bar attachment: www.ironmaster.com/products/c...
► Dip bar attachment: www.ironmaster.com/products/b...
► Nuobell Dumbbells: smrtft.com/collections/person...
► Resistance Bands: amzn.to/3DnPYAQ
► Resistance Bands Bar: amzn.to/3yk6oGt
► Quick Links (M10 3/8"): amzn.to/2UTuFFR
► ACBEE Resistance Bands Handles: amzn.to/34CX6fY
Free Content:
► Subscribe: gamerbody.com/youtube
► Workout: gamerbody.com/training/
► Equipment: gamerbody.com/equipment/
► Resources: gamerbody.com/resources/
Please leave any comments/questions below for follow-up videos!
TIMESTAMPS:
0:00 IronMaster Super Bench Pro Intro
0:30 Overview of IronMaster Super Bench Pro
1:41 IronMaster Super Bench Pro V2
2:08 Pros: IronMaster Super Bench Pro
7:56 Cons: IronMaster Super Bench Pro
13:32 How am I going to use it?
15:37 IronMaster Super Bench Pro Outro
#IronMaster #SuperBench #HomeGym
Note: prices for products may vary based on when you watch and click the link within the description of the video.
Affiliate Links: Affiliate links are present within the content. These affiliate links may lead you to third-party sites to purchase products or review any information. GamerBody LLC and the author are not responsible for any content displayed on those sites when accessed through the links. GamerBody and the Author will receive a commission for any promoted product you decide to purchase through a provided link. Affiliate, Copyright & Disclaimer: gamerbody.com/disclaimer/
@GamerBody Жыл бұрын
I have really enjoyed the IronMaster Super Bench Pro after my first 30-day test. With some excellent surprise pros, it has really taken my home fitness equipment to the next level, without being too far out of the budget for most people. With version 2 launching, I may look into that as well, but it does cost a little more, but it does use my current attachments. Feel free to share your thoughts! Equipment: ► Ironmaster Super Bench Pro: www.ironmaster.com/products/s... ► Pull-Up Bar attachment: www.ironmaster.com/products/c... ► Dip bar attachment: www.ironmaster.com/products/b... ► Nuobell Dumbbells: smrtft.com/collections/person... ► Resistance Bands: amzn.to/3DnPYAQ ► Resistance Bands Bar: amzn.to/3yk6oGt ► Quick Links (M10 3/8"): amzn.to/2UTuFFR ► ACBEE Resistance Bands Handles: amzn.to/34CX6fY Free Content: ► Subscribe: gamerbody.com/youtube ► Workout: gamerbody.com/training/ ► Equipment: gamerbody.com/equipment/ ► Resources: gamerbody.com/resources/ Please leave any comments/questions below for follow-up videos!
@WateriZgood Ай бұрын
Great review! Love your review style
@theodoreboosalis Жыл бұрын
I own one as well - and it's awesome. I don't have the attachments - but I love the quality.
@ricardodiaz7426 Жыл бұрын
You sold me on using it with the undersun stuff!
@romellocarter3152 Жыл бұрын
Thank you for your reviews. Ive done a lot of research and your videos were the most helpful. Just dropped quite a lot of money (for me at least) on the super bench v2 with the leg extension attachment and the nuobells. Hopefully i can get the dip bar and pull up bar but they’re out of stock. Your home set up is definitely what Id like to mimic.
@GamerBody Жыл бұрын
Nice! Let me know what you think of V2 and if you see anything different from this video with it. Also, let me know if you like the leg extension and if they work with Nuobells or not (not sure if the hole in the plates fits the extensions).
@romellocarter3152 Жыл бұрын
@@GamerBody Im really hoping the nuobell plates fit on the leg extension actually. I’ll be back in a few weeks to let you know :)
@jamestonbellajo Жыл бұрын
@@romellocarter3152 dumbbells won’t work with the leg extension and Nuobells’ plates don’t have 1” holes. but Ironmaster recently released “Dumbbell to Barbell Adapters” that allow you to use dumbbells on plate loaded pegs and barbell sleeves, so that could be an option to get your Nuobells to work with the attachment. Costs $179 though and I’d recommend getting collars for leg curls too. The attachment itself rocks though. Changed up my leg days when I got it.
@cafeapaka7501 Жыл бұрын
Lower the bench before removing the pull up attachment and rest the pull up attachment on your shoulder to minimize it from flipping up. The same is true when inserting the pull up attachment
@GamerBody Жыл бұрын
I used to do this, and actually had the same recommendation in my first video, but since then, I actually think it is easier (for me) to put it in while in the upright position. Depending on your ceiling height, you may not be able to do this, also if you are not tall/strong enough it may be challenging, but for me, I have found getting the bar into position far easier with the assistance of gravity. Feel free to put it in a horizontal position though, get it in place, and then raise up into the vertical position.
@rdzrepresent Жыл бұрын
love fitness equipment from Ironmaster.. I've had a lot of Fitness equipment, but Ironmaster is the best. it would be nice if they made adjustable dumbbells like Nüobell
@GamerBody Жыл бұрын
I agree. They have "adjustable dumbbells" but nothing beats the ease of use with the handle twist versions. Both Core Fitness and Nuobells are my go-to items just for that reason. The Core dumbbells have lasted over 5 years for me so that has been an excellent buy. I do like that the IronMaster can go higher, but all the plates and changing them are where I am not a fan.
@joeprivate2687 Жыл бұрын
My friend has one of these, he thought the pull up bar is too unstable so has asked me to tighten it somehow. However he said the same thing about the width and asked if I could cut the ends off since he doesn't use those. Of course I could but I told him how he could do it himself.
@Arrowsmith86 Жыл бұрын
Thank you for this thorough review, so close to pulling the trigger on this. Quick question, did it come with the little seat attachment?
@GamerBody Жыл бұрын
Yes, seat is included.
@kristy77a Жыл бұрын
Good review, very helpful, thanks. I'm more interested, however, in those dumbbells! What are those? Thanks.
@GamerBody Жыл бұрын
I have the following: Core Fitness Dumbbells - up to 50lbs: kzfaq.info/get/bejne/mKqTmKpmz7auiYE.html Nuobell Adjustable Dumbbells - up to 80lbs: kzfaq.info/get/bejne/qc6Cm7B63raWY5s.html Note, the Hyperbell products don't fit the Nuobell. See links for reviews I made on each.
@mrmanju6989 11 ай бұрын
half of your complaints were about the pullup bar, and i honestly dont want to use that pull up bar anyway. Sounds dope
@beauvance Жыл бұрын
Thank you for such a thorough review, I've been looking into this. Do you think the bench would not be an ideal choice for taller people like me with a height of 6'3"? Also, thanks for all you do- love the channel. Peace from SATX!
@seppeg6035 Жыл бұрын
I believe I saw somewhere it is comfortable up to 6’4” around there
@GamerBody Жыл бұрын
I think you would be around the cutoff for it. Anything 6'5" or higher I wouldn't get this, but it is hard to find anything else that fits that height.
@Mendozabro499 Жыл бұрын
Thank You Again For The Amazing Review Of A Dope Home Bench! Is there A Model capable of going into A decline angle? I am seeking A bench with the same capabilities able to go from Decline-Incline
@GamerBody Жыл бұрын
This one has another attachment you can put on that allows it. It will cost more for it, but if you want this bench, they have it :)
@rhoads0098 Жыл бұрын
Let’s say you set the incline to 60 degrees to do incline dumbbell curls. Will your right hand/dumbbell hit the curve of the seat like you did on shrugs?
@GamerBody Жыл бұрын
For me it does not, but maybe if your arms are longer than mine it will.
@Oliver1071 Жыл бұрын
I see your wheels are on the opposite side compared to their site. Did you have to buy the optional wheels or is the bolt spacing the same on either end. I have a wall behind my weight rack so I would like the wheels to be on the pillar side like yours so I can move it in to position. Also how's the weight? My wife and I use an Amazon basics bench and it's super easy to move around. I wouldn't want her to struggle with the bench when I'm not around. Great review thank you.
@GamerBody Жыл бұрын
Take a look at my unboxing and review as it should help answer the questions: kzfaq.info/get/bejne/abuHm5ilmrWspWw.html For the wheels, it came with them and I installed them on the side shown in the video.
@webcomment8895 Жыл бұрын
Power Block has a similar bench with similar dip and pull-up accessories. I wonder which is better?
@GamerBody Жыл бұрын
Yeah I saw that. While I don't really care for the PowerBlocks compared to the Core Dumbbells or Nuobells, it may be a decent bench.
@michaelkulman7095 Жыл бұрын
In another video didn't you say you didn't like the fixed width of the dip bar? By the way what is the width of it and heights? I see dip stands like the Leberts you also have or V shaped dip bars as critical for some people. Parallel bars are great when the right size but a V shape accommodates many more people and the individual stands of course too... It's a problem at fitness parks too... V bars are unusual.
@GamerBody Жыл бұрын
Yeah V bars won't be very common, but you can set it up with the Lebert Equalizers I have right now. The website has the listing as "Easy-to-grip handles have a 1.5" diameter and measure 23" wide."
@buddyryan875 Жыл бұрын
Could a suspension trainer hold up on this pull up bar? I'm looking for one that's off door that can also hold up to a suspension trainer
@GamerBody Жыл бұрын
I think so, but vertically. Depending on how much you weigh, doing something like incline rows or face pulls might tip it over. It is a decent weight, but again, I would only use straps in a vertical pulling manner.
@korgrandi 2 күн бұрын
Thanks for the review. I am 6’6 and am wondering if the bench + pull-up bar would be high enough for me to do pull-ups comfortably?
@GamerBody 22 сағат бұрын
As long as the ceiling allows it, it should be tall enough. You still may need to bend your knees slightly, but it should be tall enough for pull-ups.
@elmhurstenglish5938 Жыл бұрын
What's the difference between the Pro version and the regular? It's expensive in the UK....the pro is 533 dollars for the bench alone.
@GamerBody Жыл бұрын
Regular doesn't have the attachment option, it is just the bench. The newest Pro 2 version has another seat height setting and shows the angle on the bench itself.
@javierapxD Жыл бұрын
can you please do a review on “X3 bar system”? is a resistant band i keep getting ads on. it comes with a metallic bar people say is pretty good and the bands last years. thanks!
@GamerBody Жыл бұрын
Take a look at this video. It is a version I put together that is less than half the cost: kzfaq.info/get/bejne/mNylZ8R01dq4m4k.html
@repentandfollowjesuschrist6170 Жыл бұрын
I think your talking about that overpriced thing I keep saying... Bands are bands at the end of the day but I wonder if those ppl that say they last yrs have they really been using them for yrs ?
@GamerBody Жыл бұрын
@@repentandfollowjesuschrist6170 No idea, eventually they will break down like all things do. I have had some snap on me in the past right out of the box and that is never fun. So far the UnderSun, which I've used the longes, have only snapped once out of the box (x-small band), but they replaced it and it has been good since.
@julianp.2840 Жыл бұрын
Do they legs in the front bother you? Since you can't tuck your feet?
@GamerBody Жыл бұрын
No, as I never tuck my feet, they are flat on the floor.
@HanlonsRazr Жыл бұрын
I wonder if a person could cut several inches off each end of the bar (handles) without causing any structural integrity issues? It would make it easier to move around and store...and I never do pull ups THAT wide regardless. I mostly just use the neutral grip handles. 🤷♂
@GamerBody Жыл бұрын
I think you could if you had the tools without much issue.
@HanlonsRazr Жыл бұрын
@@GamerBody I finally got around to shortening the handles. I took a ~ $25 pipe cutting tool, and it cut the ends off so smoothly that I was able to take the end caps off and put them in the "new" end. The paint under the foam got a little messed up, so I wrapped some Gorilla tape around it. It now weighs 27oz lighter, is easier to move around, and takes up less space. I tried posting a link to a pic, but ScrewTube deletes my comment entirely if I insert a link :(
@GamerBody Жыл бұрын
@@HanlonsRazr That is awesome! I like how it made it a bit lighter and smaller to move it around. Great work and it may be a great video idea for your channel if you have one.
@futbol1972 Жыл бұрын
What's tje differwnce between the pro and v2?
@GamerBody Жыл бұрын
From what I can tell, they added a 3rd seat height and numbered the degree of angle for the bench on the metal bar.
@kaydawgy1999 Жыл бұрын
That Pro V2 has a third seat setting, but doesn't that seem a little high?
@GamerBody Жыл бұрын
Does look a bit high in the photos, but I haven't tried it yet so I can't say for sure.
@elmhurstenglish5938 Жыл бұрын
Depends how tall you are, I suppose. For me, might be better.
@jono601 9 ай бұрын
How high does your ceiling need to be to use the chin up bar attachment comfortably? Is 96 inches too low? I'm 5' 11" tall. Thanks
@GamerBody 9 ай бұрын
We are the same height. A standard 8ft ceiling is high enough to get it all in place with a little extra room (at least for version 1, I have not tried version 2)
@jono601 9 ай бұрын
@@GamerBody Thank you! That's great news. I just got the super bench pro V2 today and can't wait to try the chin up bar.
@GamerBody 8 ай бұрын
Nice, hows it been since you got it?
@PokerStarsPA 11 ай бұрын
Get the lat pulldown attachment and review that!
@GamerBody 11 ай бұрын
I don't plan on doing that. I am moving so I actually sold this to give us some more space, but might look into getting it again. I am also looking at other options.
@PokerStarsPA 11 ай бұрын
@@GamerBody Review the Ironmaster Superbench PRO V2. There is no better bench for a room in a home.
@GamerBody 11 ай бұрын
@@PokerStarsPA Not much of a difference really and costs a lot more. I am moving right now so I sold my current one. It could make a good opportunity to test V2 when I get to my new location.
@PokerStarsPA 11 ай бұрын
@@GamerBody Tell them to send you one free for a youtube review. $200 marketing expense for them.
@fujimuto4277 11 ай бұрын
Can you do ring exercises with this product?
@GamerBody 11 ай бұрын
You can, but I'd stick to those in the vertical plane only.
@jaleesa00 Жыл бұрын
Can you use a suspension trainer with the pull up attachment like a trx or trx knockoff.
@GamerBody Жыл бұрын
vertical movements yes. It could potentially fall over if you are heavy and at an angle away from the bench itself. I can use if with my bands for pullovers so it can withstand a lot, but it would eventually fall over if enough resistance is applied.
@jaleesa00 Жыл бұрын
@@GamerBody thank you
@lt5550 Жыл бұрын
How Sturdy is this thing 🤔 I'm 295LBs and I'm trying to figure out if this thing will stay in place as I dip and pull up.
@GamerBody Жыл бұрын
Im 190 right now and it works fine for me. It says it can hold 600 when in incline so I think it should work. I would check with their support first though.
@theFitProfessor 3 ай бұрын
Does the V2 weight the same?
@GamerBody 3 ай бұрын
I think it is a little more, but I've only ever had the V1 so I am not sure.
@sg.azuris Жыл бұрын
You didnt get the leg extension attachment?
@GamerBody Жыл бұрын
I did not. Something I am looking into, but don't have it right now.
@GamerBody Жыл бұрын
@@HanlonsRazr Hmm good to know. Do you use dumbbells with the setup, and if so, which ones?
@jamestonbellajo Жыл бұрын
Hey! Great great review. I actually found a way to raise the bench a bit pretty easily. I bought some stair treads from Home Depot (brand is Technoflex) for like 25 bucks which are just thick pieces of rubber to put on stairs to prevent slipping. They are practically exactly like stall mats but come much smaller and are easier to handle. I used them to create blocks for exercises where I want better grip for leg drive but I started putting them underneath the feet of the bench to raise it and it’s been great for incline exercises where I sit on the seat attachment that’s a bit too short normally, so my knees are no longer at an acute angle like you said. I think they’d be helpful for you too outside because they’d provide a better surface than carpet to do workouts on. For actually creating the blocks, they come in packs of 3 long pieces so I just cut each in half for 6 total pieces to make 2 blocks that are 1.75 inches thick. Not necessary but glued them together and drilled screws through them.
@GamerBody Жыл бұрын
Interesting. Not sure I would need it, but if anyone finds this more comfortable for them it may help!
@user-lv4ne7nq1h 9 ай бұрын
The price is too much for me, but its also one of the few benches that has pullup bars. Gonna wait till blackfriedays to buy a bench, and hopefully this bench goes on a sale
@GamerBody 9 ай бұрын
I ended up selling it for my move (just big and costly to take with me) but the bench is great otherwise! I may look to get it again in the future if I go back to dumbbells/bodyweight workouts.
@wendaltvedt4673 11 ай бұрын
Do you work out from home only?
@GamerBody 11 ай бұрын
As of the last few years, yes. Occasionally I get invited by someone to a gym (last time was 3 years ago) and I just workout in a hotel for a day, but that's it. I just workout from home otherwise.
@davek7706 10 ай бұрын
The pull up bar and the dip bar should be the same attachment.
@GamerBody 10 ай бұрын
Eh, I like them separate. It would make it really bulky otherwise.
@andynonimuss6298 Жыл бұрын
Basing most of your complaints around how it and the attachments fit into your small closet are not cons.
@GamerBody Жыл бұрын
For me, they are. I add in personal cons.
@Freedomboy006 Жыл бұрын
where’s the seat ??!
@GamerBody Жыл бұрын
It comes with a detachable one. This way it doesnt get in your way if you just want a flat surface to lay on.
@rbrtwhill 11 ай бұрын
I just bought mine on their 4th of July sale. By purchasing a package and the promo code I got almost 25% off.
@repentandfollowjesuschrist6170 Жыл бұрын
Chop off the handles on the pull-up bar bro
@GamerBody Жыл бұрын
You mean the ends where it bends? Yeah don't need to go that wide and it would take up less space.
@Leveleup543 Жыл бұрын
With Black Friday sale this is a pretty solid buy I think. Personally, I think it is shameful how stingy some of these other companies are with sales…
@GamerBody Жыл бұрын
Eh, a lot of marketing is less about sales, and more about keeping the price but increasing value. That way you aren't racing to the bottom.
Gluck's Gym
Рет қаралды 31 М.
Part 2 - Ironmaster Super Bench Pro Chin Up, Hybrid Bench Pad, Hyper Core, Preacher Curl Attachments
Home Gym Hacks and Reviews
Рет қаралды 25 М.
Home Gym Hacks and Reviews
Рет қаралды 24 М.
FoodSlideBoard
Рет қаралды 55 МЛН