Hell9

100%

Hi

Idiotic

Lovely vid matt.

same

I agree dude I wish the had a 88 mm or a pak 40 to shoot it with

good idea, but a 55 gal drum isn't big enough. Im thinking a residential above ground LNG tank.

Maybe the govt is still selling off some of fpsrussia's arsenal

Also put a explosive inside of one and see what happens from the inside with a explosion!?

Incendiary!

OOBLECK VS TANK? HMMMM YEAH, DO IT! ! ! ! :)

OnLy question is why didn’t we try that sooner brother

I would try the same rounds on the barrels of oobleck to see if there's a difference, and then to finish it off, hit it with the tank round.

Of course it is. And the answer is HELL YES!!!!!!

Came here to suggest the same

The best one is where they have an intervention and his buddy comes in with one and says what you said we were giving him an intervention 😂

Yea they put too much water, I was thinking the same.

I hear keeping it cold ruins it aswell

Yeah they way over did the water cause it would not splash like that

It did look a little on the thin side. Although it didn't splash when he was punching it so at least some of the properties are there...

Yeah I agree

For real, I'm sure at this point he's like, "if i wanna blow it up or shoot at it, I'm sure they wanna see"

That's his way of justifying doing it to Mere lol he blames it on "us" 😂

@@Ks_HandymanAndLawnMaintenance for real lol. That little fucker probably already rented the tank XD

@@tylerfitts8194 Ofcourse, I'd bet he filmed it the day later, and we're probably seeing this a week later after that. It's a good way to hype a video you're doing/done regardless.

@@saladin7467 I didn't think about that man. I'm honored by such sage advice, from the terror of the east himself no less.

i would say it was a shockwave effect where the energy of the bullet caused the fluid in the radius to solidify causing a transfer of momentum to the bucket itself, which is why it flew off so violently.

i can say the same thing about ME HAHA

Yeah this guy is telling the truth except no need for the puck for this concept to work. Just hand.

I agree, a bit “watery” Probably was the easiest way to fill up the small jugs with it a bit more fluid though

Last time I used home made oobleck you were concieved, my son.

How do you make the oobleck thicker

@@zeph6768 dont put as much water in it when making it, or use more cornstarch if its too runny

Typical is 1 part water to 2 parts corn starch.

ikr 😆

@H I K A M A R U 🅾️ another stupid bot

literally every time i watch the body armor vids

That’s so true

It would be good to see if a 50cal makes it through a large drum of it instead of the many small cases

Also said 11:04

@@sexygirls3166 what in the actual fu-

@@Realizinq LMAO NOOO

Don't tell Mare

I like your bike

As some dude that just wanted to play with oobleck, these were my thoughts as well

As one who did this once as a child, i absolutely agree. the later stuff was much better, but the bowl was not kosher. It must keep its shape as you pick it up, then turn to liquid..

Partly you want it to solidify at the right pressure, a weak one might well be better for this. It'd be nice to try some different thicknesses first

My thoughts exactly, it's to wet, punching oobleck shouldn't even leave residue on the hand

@forrestholmun64 it's ok, I do the same thing and people get all confused or take offense 😆

That’s what most people love about Matt and his brother. Both of them skip the commentary and get straight into the action albeit with some comedy in the middle.

yea it looks really good.

This is true. But the over the shoulder shots, are never in focus. That is the only thing left to fix.

Production values have gone way up.

Happened right around the time he started doing collabs with flannel daddy. 🤔

Mirrorless camera?

I actually like the idea, hopefully he does more with oobleck

I’m actually curious

That is an Ingenious idea!

Just came here to say the same thing.

This guy is obviously trolling for some weird fetish film.

still no 2160 :(

He’s been hanging out with Garand Thumb lately😂

He took some notes from garand thumb

This

Yup, need control tests.

Bump

I thought the same thing.

It’s going through

An orphanage?

@@buzzfeedlgbtq3194 that depends. Do they pour the milk before the cereal?

@@jeffjacobs6104 Doesn't matter. The answer is always yes

We talkin 105mm or a 120mm?

Speaking facts

Came here to say the same thing.

Yeah seemed way too runny

I thought so

He hired an actual production team.

Matt's are good, but not on par with Garande thumb yet. That guy is insane with his intros

Yes

The intros are getting worse and worse.

Yeah, I think so. He's definitely got a new camera and is using VFX for the gunshots (I love VFX they're so cool)

Yeah, it's far too watery.

Too watery but dude don't define yourself as a professional ooblecker

Agreed, too watery. But he did end up with the same desired effect, just not as dense

True

@@itsmebutwhoami8177 Let the man be a professional ooblecker

They were hidden in his prison wallet

wait Matt is not a video game character i have been lied to my entire life

I was just thinking the same thing. He needs a little bit more corn starch.

I was waiting for this comment 😂

Came here to comment the same thing, left with a like

I’m just going to say it That’s what she said

Let's go Brandon!

That’s the last sentence in the intro…couldn’t make it out?

who's "him" did you refer to btw

Dude I don't just like this idea, but I LOVE it. But also I think a big appeal to this video is that pretty much ANYONE could make a bunch of Ooblek just in their kitchen in under an hour and basically do the same thing lol But I agree, I would absolutely love to see him do a video doing your idea! :D

There's a mushroom for it certainly. We just gotta find it.

@@Shiznittlebizbampop1 Thanks to the internet, it's more doable for average people than you think. Almost every ingredient can be bought from Amazon.

@@Nuovoswiss after seeing your comment in my notifications I went to look and good and you're totally right. Not too cheap (at least not as cheap as cornstarch and water lol) but still VERY doable!

Maybe he put a grenade in a big bowl of oobleck? O.o Or he tested some C4 vs Oobleck? If not I hope this is an input for future videos... ;p

No, the question is what DIDN"T he shoot with the tank while he had the opportunity.

He's probably withholding the head to tail SUV tank shot to put in that video.

wow, i actually didn't know this. thanks for telling

I have armor in my motorcycle gear made of D30, as well as insoles for my skate shoes. The stuff works great for landing after a high jump, as it takes a lot of the force and keeps it from transferring up to my knees. Haven’t had a crash yet on my bike to test my armored jacket…but I’ve heard it works great to prevent what would be serious or life threatening injuries.

@@westabon420 Hopefully. Wrecking mine sucked😂

What's the brand name?

D30 is a must have for me in motorcycle gear. The shit is incredible.

Yes! It was the first thing I noticed! From the beginning of his channel to now, this is a huge thing in my opinion!

i agree

What's funny is tbh out of everything, is is not only the first thing I noticed, but also one of my favorite parts of the whole video...... Again tbh it might actually be tied with my favorite part lolol Btw my favorite part was (And this shouldn't be a shocking thing.) when the 50. Came out and not only did the 50, come out (Because we all knew it was going to come out at some point) but that when Matt guessed it wasn't going to make it out of the 10th one and not only was he right, but it actually didn't even MAKE IT to the 10th one! Like when he said the 10th one I actually agreed with him (And what's funny about that to me is that I don't normally agree with his guesses. But in this one I actually agreed with 3 of his guesses. So that pretty much NEVER happens to me. But that's just me and it made the video just that little bit more enjoyable haha 😆 :) 🤯 ) so I actually really really enjoyed that part lol So if I'm saying the fact that it's not just the first thing I noticed, but also that I enjoyed it just as much as him shooting the 50. at Ooblek and my guesses were the same as his. That really says a LOT about how much I like the new camera! Lololol 😅😆😂

Yes it was great except for when he shot the .50 BMG it blurred out the Oobleck/target so you can’t see it explode when shot. For long shots he should stick to the old one.

Didn't notice a thing. Oh wait, my desktop is 11 years old. My monitor, maybe 6 years. It looks good enough for me! :) AMD FX(tm)-8320 Eight-Core Processor 3.51 GHz. 1920 x 1080. Yeah, I'm old and don't care. LMAO!! Ha! Ha!

there was some non newtonian ferrofluid that was making all kinds of waves back in the early 2000s or so as a potential body armor. it was around the same time that dragon scale was being hyped up. dont think it went anywhere though or we would have seen production examples by now. the problem always seems to be you just need too much of it. yeah a non newtonian can stop a bullet but to do it you will have exponentially more bulk and weight than ceramic or even steel

@@crazysilly2914 lol your crazy

IIRC, it only went into use in the production of trauma pads, not mainline armor.

could be a cool sandbag filler idk if it would be better or worse tho

@@GarlicSoda not really. you would need a bag that cant leak and has to be sealed up as opposed to the burlap or woven polymer that can just be loosely closed. and the moment it gets punctured it will start to leak and will have to be replaced as opposed to being just fine. also would likely be worse at stopping rounds than actual sand or dirt. i doubt that you would need 4 feet of sandbag to stop a sub sonic 300blk

That’s what I’m sayin

I was thinking the same thing lol. I am also not a scientist like Matt is, so...

its not even close. with water, a regular handgun round will go thru about 4 gallon jugs x 8" each, or +-26-34", depending. This ooblek stopped a .357 in less than 5" and a 12 ga. slug on less than 3". Amazing!

@@perseusrex614 apples and oranges. The ooblek is in super hard ice pack containers. That plastic is REALLY hard. You can't compare this with videos you've seen of bullets being shot at VERY thin, soft, and weak gallon jugs. A .22 LR would rip through a dozen empty gallon jugs, but wouldn't go very far in these. A gallon jug is about 7 inches across, and those are about half that. So for every 7", the bullet has to go through 2x as many walls, that are 10x thicker, and are 3x as strong.

@@xenonram the plastic is a factor but if you are telling me that a .357 out of a rifle would stop in 2 of those filled with water, then I cant help you

I’ve shot into a cup with oobleck and splashes out in small chunks

@@Davie272 Yeah, but what happens with a .50 hits a 3 foot deep barrel? This are the questions that need answers. For science

You stole my statement dude! 🙃

@@martincolvill5453 i made the joke, then scrolled down and saw this. F

This test has been done before. Copying someone's idea and adding a commercial

Slow is smooth, smooth is fast. A bit of KY helps too.

@@eggbert191 link

You always store the Barrett in your prison wallet.

I think that was the Serbu BFG-50A, it has an opening at the front of the barrel shroud unlike the Barrets, you can see the reflection if you pause at 0:45. I guess the charging sound was edited in.

Also, the bipod is farther from the end of the shroud on the Barretts.

You can't compress a liquid.

@@dick8997 There is an exception. If you get a water bed and put your mother on it, it will compress.

@@dick8997 All liquids are compressible, just to such a small extent we call them incompressible. This is also just describing normal fluids, when you start working with supper critical fluids, the distinction between liquids and gases break down and allow for highly compressible fluids.

I remember seeing a motorcycle gear company trying to use non newtonian fluid in some sort of jumpsuit

@@dick8997 That's why it's called a "Non-Newtonian " solid :)) It only slightly resembles a liquid, but it's not a liquid !!

Einhorn is Finkle. Finkle is Einhorn!

@@cdegenova1761 he found Captain Winkie!

Her gun was poking me in the hip…

You guys a terrible lol. What I took from that is Matt's a ass guy, not a boob guy.

Baby got back!

poland.

My idea was to suspend some kind of media inside of STF. Like maybe AR500 pellets or bb's, get a thick enough STF and suspend a lot of them in it. And when you shoot it, hopefully it would transfer the force to STF much better, while also providing more protection against slow moving rounds. I think the main advantage would be having flexible armor that's good against higher powered rifles, as opposed to the plates which greatly inhibit movement.

@@lazar2175 That's a really interesting idea. More experimenting to do with grain size, perhaps steel sand would work well and turn into something akin to concrete when hit. Not sure Matt's about to dive into the deep science though, maybe taofledermaus would be up for the challenge?

I was wondering about this, thanks!

I was just gonna mentioned that Destin did a small scale version with the golf ball cannon... (edit) as I was... it was the Backyard Scientist...

Was just thinking that

It might fall short of the "causes a nuclear explosion if hit by a laser" part, though.

Well, that is intro material...

@@michaelschumacher597 Are you sure, did you do the science? ;D

He is a veterinarian so yes.

He is no a doctor’ish, he is a Doctor of Veterinarian Medicine.

@@jodymooney255 And he usually refers to this as: "I am a Doctor ... ish" His words, not mine.

@@jodymooney255 oooo he got ya there! Guess you don’t know more than him like you thought in your first comment? We beeen knowing he has a doctorate degree, you thought you were breaking news 🗞 🤣😂

​@@Abcdefghijllmnop God, you're insufferable.

The slow blade passes the shield, right?

@@P3x310 Exactly.

Rescale how you think about modern life. A personal shield today isn't necessarily about worn body armor. This looks like less than ideal armor, indeed. For a human. But I see this as a very slick hillbilly upgrade to vehicles. Image these oobleck vessels, 3d printed to fit, set in layers between body panels on cars. So that there's multiple layers&0wiggle. I image a soft plastic or silicone, that can self seal a little would be ideal.

Dat ass

@@arbhall7572 Non-newtonian fluids are being very heavily researched for body armor. Not oobleck, but fluids that become even harder with less speed. Think of a level 2 plate with a non-Newtonian fluid sack behind. The sack wouldn't protect against handguns at all, which is what the plate is for. Anything super high velocity will be stopped dead by the non-newtonian fluid sack behind.

That's high quality parenting right there.

Big boom in one word mate

I bet it would work better than the guns.

Time to ask Tod Cutler of Tod's Workshop

@@Stroopwafe1 time to ask joerge

The smaller the point is the better chance it has of going through basically the surface area of a fist versus a knife a knife will glide through easier then a fist given the same force because less surface are for the liquid to harden and slow it down.

You spelled "BFG" wrong...