Yes, the warden is the best blaster of all time

I think I would rather buy a rough cut

I’d buy 10

@@snailstudiosyt at least!

No, roughcut is old but decent in every single way then a 2.0 warden

I think so

@Nitro Charge151 yes he did

Well that’s a baby step forward

Definitely makes you wonder if that led to any changes.

Hasbro gets it back on the bench "who the hell solvent welded this together!"

Or get two of the top down buzzbee double shots and slap them together.

@@JaneDoe-ke2ge or buy a roughcut battlecamo

@@JaneDoe-ke2ge That's actually an awesome idea. And why stop at two???

@@nicholaszayd5688 I'd never be able to find it.

@@justajolt Now i want to see a video on this!

F in the chat for the Hassenfeld Brothers

I was about to say the rival version of the gun exists, but that one at least works, so despite being a jolt reskin in how much it holds, I can't say it belongs in the trash... if it's on sale.

@@shadowsnake5133 It was the McCree, I mean Cassidy blaster that only holds one. The Reaper one holds 8 like a less-convenient Takedown.

True... You could buy the rival Reaper blaster but just repaint the warden andyou have the ability to throw them in the ground without breaking them, since it already is, at the cost of the gun notlooking the same.

Your tactics confuse and frighten me sir

His name is scary too

Personally, I liked the design right after the ones with a spring when it was still a separate piece, and not part of the shell but now it’s stupidly cheap, idk what they’re saving with it

I would to

I was sceptical at first of the lack of spring on the rail tooth, though I do admit that I actually prefer the solid piece, as seen in Modulus and Doomlands blasters, over the original spring-loaded tooth from N-Strike and early Elite days. It just seems to hold attachments much more securely and with less wobble than the original design.

I believe they started in 2018. Looking at 2017, they have the spring, yet the Scravenger has a solid piece

Maybe, and just maybe, someday Nerf will make a roughcut with metal gears... Oh and that isnt clipped and solvent welded-

My apollo with metal gears still jammed and locked up. Lost springs taking it apart, so it sits as replacement parts for my other apollo.

and it did

Due to this lineup, Blaze Storm seems like a better option now😄

The Turbine isn’t bad. Though, you can still get much better flywheel blasters *COUGH COUGH DART ZONE SPECTRUM COUGH COUGH*

@@jokerisinthememe5852 Dart Zone are irrelevant until their stuff is actually available overseas

Nah bro there’s a high chance of it not breaking

(I should mention that I made the blunder of buying a Shockwave when they came out, so, I paid the piper on that one and it soured my outlook on the entire series)

I definitely don't have an interest in buying Elite 2.0 off the shelf. Based on my experiences, the Shockwave might be worse than the Warden (assuming it's functional).

@@beretnarf I at least managed to mod my Shockwave (as best as it allowed) before I gave it away; hardly made a difference but hopefully someone is having a good time with it 😂

I have been unable to find any decent modern NERF here personally AKA all that seems to come through here is vintage items. I did manage to get a 98" Big Bad Bow tho which is in pretty much mint condition minus the missing stickers and it fires Mega XL quite nicely so I am glad to have ammo for one of my favorite blasters.

@@beretnarf Shockwave owner here. It's not bad at all. It is surprisingly hardy. Fired off 200+ darts with it so far, so at minimum 13-14 full firing cycles, probably more than that, and it is insanely reliable. The prime is PAINFULLY easy, very little resistance, I've only had one jamming instance so far, it's still functioning and I haven't been able to break it. The only real issues with it are the sometimes inconsistent barrel clearances (leading to at least 1 dart usually not going very far and sometimes a few more), and no Slamfire. However, I do know for a fact that the Surgefire before it had unreliable Slamfire that liked to skip barrels, and at the max ROF I can maintain with the Shockwave, sometimes it will do that as well even without Slamfire, which is why I'm fine with it not having Slamfire. Oh, and a nitpick, the drum isn't easy to turn by hand, so getting to the very top and very bottom barrels of the drum to reload them is a little slower and more difficult than I would like.

But it's fixed now, is it?

I got lucky enough to buy white and orange roughcut,it was last on shelf somewhat 34 days before before elite 2.0 hit the shelves.

Thanks for justifying that the Warden had been re-released and the gear system is fixed!🎉🎉🎉

DO NOT THROW IT OUT, I FOUND A VIDEO THAT CAN FIX IT kzfaq.info/get/bejne/hL6dkrxi0J6WYGg.html

@@mafia_trilogy_enjoyer I didn't throw it away, the repair was a challenge and opening it was a pain, but I'm able to fix it, and my Warden is working again.

So it's still broken... Yeah that's sad. "Good" job Hasbro

Interesting, I hadn't heard that about the elite darts before. There have been quite a few roughcut repaints so it's very possible things started going downhill before Elite 2.0...

@@beretnarf yea maybe they started lowering quality a little before. I had the BattleCamo Roughcut and I bought it a bit after it’s release

My battle camo roughcut actually won't fire 2 at a time anymore

My roughcut still worked perfectly after 5 years

@@ExodusisThere oh wow I basically had the opposite problem

Shockwave is completely out of question. I've seen far too many sealed shut in the box halfway or fully primed. Poor kids that are going to get one

I very much agree on the shockwave. I did play around with one because a friend had it and wow not only was it cheap but its performance was terrible.

@@beretnarf yeah my friend got one and it couldn’t even clear a retaliator barrel.

I noticed that too, I wonder if it's different designs? Could the fresh one be a breaking one?

@Nitro Charge151 True. There are flaws, but it IS decent.

I still find the Turbine pretty ugly. It desperately needs a barrel attachment and a sight. Meanwhile, the Rapidstrike looks pretty great without any attachments and has an extending stock.

@@smittzero8463 Eh, you have your opinion, I have mine, I respect yours, and honestly, it’s not ENTIRELY unfair. The turbine could do with some attachments.

If it breaks, it gets a pt 2

Get a turbine, it’s the best one of that line

Turbine, echo, Phoenix and eagle point are really good

Sadly a Turbine is nowhere to be found on the shores of Canada. I think it was an exclusive.

@@maritimefoam you can buy it on amazon

@@antotvsergi2870 I got a Phoenix for 10 dollars on Target and It’s honestly not that bad. Mag release is kinda goofy but otherwise it was a steal for 10 bucks.

Thanks for justifying that the Warden had been re-released and the gear system is fixed!🎉🎉🎉

Why you doin Roughcut dirty like this? Roughcut nice lookin and actually works, Warden looks like trash and behaves like trash

The Roughtcut cannot even be compared to how crap the Warden is.

It's sad because I don't hate the Ultra 3

WAIT WHAT?!?!

Rival

ultra imo

Yes.

cool video btw

No one does it better than the Internet Historian ;)

Maybe he needs to put more of his finger to have better control to the 2 stage trigger, as said from Coop772.