Is this Art or Terrible Mess?

No video

Is this Art or Terrible Mess?

Рет қаралды 18,424

Күн бұрын

This video is an experiment to see if Resincrete will work in the same way as epoxy resin using metal leaf. Does this turn into some wonderful art or is it a terrible mess?
Subscribe to my Instagram here: / stevemcdonaldarts
☕ TO BUY ME A COFFEE. Every contribution is very much appreciated and allows me to keep making regular videos. www.paypal.com...
📹 Check Steve McDonald Crafting KZfaq Channel: / @stevemcdonaldcrafting
📬 If you would like to post something to me, please use:
PO Box 277, Newmarket, CB8 1GY, United Kingdom
😍 CHANNEL MEMBERSHIP Check out the perks by clicking the JOIN button on the link below. / @stevemcdonaldartsandc...
✍ My WEBSITE, available here: stevemcdonaldc...
💻 As an amazon associate, I earn from qualifying purchases:
(USA👍) Here is my amazon store for the USA: www.amazon.com...
(UK✊) Here is my Amazon Store for the UK: www.amazon.co....
Or see the individual links below for the items used in this video:
LINKS FOR MATERIALS USED FOR THE (USA👍), (UK✊), (Canada👋) and (Australia 🙌) ARE BELOW:
⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇
LINKS FOR USA (USA👍Only)
(USA👍) Resin: jdiction.onlin...
(USA👍) Low Viscosity UV Resin: amzn.to/3I7askm
(USA👍) Resincrete: amzn.to/3IKvirv
(USA👍) Resincrete discount code 30% off: stevecrete
(USA👍) Round Dish Moulds: amzn.to/3YTwrSG
(USA👍) Long Dish Mould: amzn.to/3xwzX9Q
(USA👍) Metal Leaf: amzn.to/3ICtD6U
(USA👍) Makeup Brushes: amzn.to/3Z07Iw3
(USA👍) Tattoos: amzn.to/3S8vIuJ
(USA👍) Arteza Paints: amzn.to/3xSyFX7
(USA👍) Polyurethane Varnish: amzn.to/3xA8yE4
LINKS FOR UK (UK✊ Only)
(UK✊) Resin: jdiction.onlin...
(UK✊) Low Viscosity UV Resin: Available soon
(UK✊) Resincrete: Available in approximately three weeks in the UK
(UK✊) Round Dish Moulds: amzn.to/3SexeM0
(UK✊) Long Dish Mould: amzn.to/3YUMX52
(UK✊) Metal Leaf: amzn.to/3ID8slv
(UK✊) Makeup Brushes: amzn.to/3YGJVBC
(UK✊) Tattoos: amzn.to/3EjM1ip
(UK✊) Arteza Paints: amzn.to/3IyvJoA
(UK✊) Polyurethane Varnish: amzn.to/419AWdO
Resincrete and Metal Leaf: Art or Terrible Mess?
Warning: Important Health and Safety Notice:
Resin is an industrial chemical and as such should always be treated with respect and the manufacturers safety advice taken. Here is a video I have made on how I keep myself safe: • Stop Making Yourself I...

Пікірлер: 66

@christinaperson1168 Жыл бұрын

I love all of your trials and errors and happy accidents! This was NOT an epic failure because they turned out great!! I appreciate you and everything you teach us! Thank you Steve 😊!!!

@davegrove795 Жыл бұрын

I love the look of the foil behind the flowers. Very interesting! Keep your experiments coming! (It saves US a lot of time and resin 😂)

@offairhead Жыл бұрын

I really love the way the white one came out. The roses came out okay. The plate, though, I don’t really love. Thanks for showing us the different effects.

@KikiCrainick Жыл бұрын

Love the tiger & butterfly, The other two remind me of the old Melmac bowls that my great grandma used. 🥰

@simplydinayaart3042 Жыл бұрын

I got my first Gallon of the JDiction 4hour resin. I just used it for the first time. I can't say how it goes since its curing but I will say this. I am incredibly impressed with the packaging and the info inside the box. Thanks for sharing about it.

@karenlloyd16 Жыл бұрын

I need that tiger tattoo!! Love that one so much ❤

@almasangel1 Жыл бұрын

Love the look of the resincrete, definitely on my list of things to try

@katherinemnusa Жыл бұрын

Hi Steve… I absolutely love your teaching videos! I am ready to do my first pour, I have learned Soooo much watching you. Love from Northern Minnesota ❣️✌️

@lindagregory3432 Жыл бұрын

You inspire me!! I also want to thank you for the great ideas and some discounts!!! Love ya

@demingfan1 Жыл бұрын

I really love these dishes. The foil - the scattered way in which it adheres - give a vintage look that is really beautiful. I’m buying some resin Crete through your / my Amazon account. I’m springing for us a cuppa! Thx Steve for all you teach us!! AND I absolutely love being a member!!

@barbseed4434 Жыл бұрын

Love the key dish!! Very striking!!

@bellnorton1691 Жыл бұрын

I really like the tiger dish, very pretty.

@patrysieugougo2184 Жыл бұрын

Steve I love it to learn with you it is fun to see that you are so cool with mistakes but teaching the best way to do crafts. Oh thanx to your video of shakers you made I am almost done with my huge shaker lamp. Thanks lots for your help. Ronnie 🤗😁

@TinaArtuso-tx6vc Жыл бұрын

Thank you for introducing this to me. I purchased it (using your discount code) and absolutely love it! Made a couple of dishes with temporary tattoos. Stunning!

@shirleyandersen4724 Ай бұрын

loved this video, it answered a few things i wanted to know .thank you .🙋‍♀

@kelliepayne2166 Жыл бұрын

love how the tray and plates turned out. absolutely love the tiger plate.

@gabrielleschmidt1435 Жыл бұрын

🎉Very cool 😎 experiments 😊

@shericedufford6661 Жыл бұрын

You’re great! I’ve only just started trying to figure out things with resin and have made some cute things that I’m quite proud of since I am a beginner, but your videos are very informative. Youve taught me a lot and I just found your channel today. Thank you so much!!

@AwkwardBirb Жыл бұрын

Haha! You completely anticipated my questions about this stuff- foil sheets and temporary tattoos. Thank you! 🎉

@richardbriansmith8562 Жыл бұрын

Awesome Video steve McDonald

@Made4YouResin Жыл бұрын

I love that tiger dish 😍 were did you buy those tattoos?

@joycepugh5347 Жыл бұрын

Very nice - foils gives it the extra pop

@coralmarinesresinart Жыл бұрын

The tiger is my favorite!

@swcrafting Жыл бұрын

I am in love with the key holder plate. So pretty

@MushroomHausArt Жыл бұрын

Absolute in love with this material so far. I had to order a few more bags because my first one is running low! I'll have to try the Polycrylic sealer on it. I'd been using Black Diamon Wet Look, but it looks oddly streaky.

@carlycharlesworth1497 Жыл бұрын

Those dishes came out so nicely Steve. I think that resincrete looks like a really good product.Thanks for doing all these experiments, they're really appreciated. God bless you and all those you love Steve

@PixieBulb Жыл бұрын

Hmmm, what interesting results! I wonder what kind of effect you'd get breaking up the foil into the liquid and pouring it.. it might look very fancy if you use a foil that's the same colour family as the resincrete, i.e. if you colour the resincrete a red colour and use a red foil. I also think the low viscosity would lead to some interesting falling effects - what happens when you sprinkle glitter over the top, or use something heavier like beads poured over the top after the resincrete is in the mould?

@gothiccharms Жыл бұрын

omg thank you thank you for that coupon code!! I've been itchin to try this resincrete out! Just ordered it and can't wait to experiment!

@dollybrown1993 Жыл бұрын

Don't know if this is my cup of tea... Right now I'm not a big fan of it. Stay safe, you do you, and stay crafty 👍👍🛎️🛎️🦋🦋

@craftydemon529 Жыл бұрын

I think it looks cool I wonder why the gold/metallic leaf sticks to resin better than the resincrete

@mandicoleman7433 Жыл бұрын

These are cool 😎😎 the tiger is my fav

@herbertbarron4068 Жыл бұрын

Excellent video. Always excited to see you craft and experiment. Love your work!!!!

@vezhopkins714 Жыл бұрын

Are they really solid when dry and do they stick together if you want to do layers?🤔

@LisaVornhagen Жыл бұрын

You got a really interesting effect with the foil. It's pretty cool looking! I really love the tiger and that paint that you used! It really came out beautifully.

@nmbbeingintentionallycreative Жыл бұрын

curious, you may have already tried, could you pour resincrete down the sides of the mould, once it has set, add the metal leaf, cover the metal leaf with resin, then put a final coat of resincrete over it - I do like the abstract of how your pieces came out only using resincrete, just wondered about using it and regular resin in the same project?

@nmbbeingintentionallycreative Жыл бұрын

I like the antique look to the two pieces where the metal leaf didn't stick as well as you had hoped

@NightOwlGramma Жыл бұрын

If you make, it's art...if I make it, it's a terrible mess!! 🤣

@maiaallman4635 Жыл бұрын

Whenever I watch your videos I always have to remind myself to change the method a bit because you don't have 40°C (104°F) temperatures where you are. No wonder my bubbles rise to the surface more easily.

@Leena79 Жыл бұрын

These look beautiful! I'm curious, how durable is Resincrete? Will it crack easily?

@carolynmozzone412 Жыл бұрын

Hi Steve, I bought the resincrete but haven’t used it yet. I’m thinking a spray sealer to avoid brush strokes. Thoughts?

@hollylowery26 Жыл бұрын

Very odd result with the leafing.😢 I wonder if you could dust the mold with mica powder. Otherwise you will just have to go with dying the create stuff. NOW your thinking 🤔 tattoos worked very well. I love the tiger plate. Not so sure about the others.😆 😆 😆

@lindaeastment4542 Жыл бұрын

Hi Steve, Loved all 3 👍 but my personal favourite was the tiger & butterfly the white background just made it pop Steve, please can you tell me are they as fragile as porcelain & if u dropped one would it smash thanks 👍❤️

@ownsacat Жыл бұрын

Are all nice. But I love tigers so I like the tiger one the best. I would actually make that and use that just like it is. It is perfect as far as I'm concerned

@patricialamson7944 Жыл бұрын

Another Steve original!!! ❤

@melaniehenshaw8696 Жыл бұрын

If you want something like this in the uk use Aqua cast from elichem it’s reasonable and very good.

@catherinedavis1690 Жыл бұрын

I think mica powder brushed on or flicked on like a sprinkled glitter look in specific areas you would like to highlight or in a pattern?????? Whatever you’d like would probably look better if it transfers well. I don’t know cause I don’t do resin I just love watching you do it lol

@mylaschorsch7516 Жыл бұрын

Does this product require the same temperature and low humidity that epoxy resin does?

@flowers-n-Stuff 10 ай бұрын

Hi steve I have been trying to find more info on resincreet. It is hard to find. I am making a wedding cake topper for my son's wedding and trying to find the right color to mix with it. The color come out so light

@cierrahurley Жыл бұрын

Love your videos have learned alot im not sure if I saw it on your channel or another but what happens if it's still liquid after the 20mins? I did measure with scale. And did it at 11pm and woke up still a liquid mess. Not sure where I've messed up...

@dpro7445 Жыл бұрын

Will mold release work with Resin-Crete?

@59AnneRose Жыл бұрын

Steve you should put a store link in for Australia

@genevafraser5859 Жыл бұрын

I prefer just the tattoos to the shiny foil

@conniewilliamson4495 Жыл бұрын

Is it white or clear. Did you color it?

@tinacluff2793 Жыл бұрын

After watching this video, I was wondering how this product would work in a holographic mold. I'm thinking it won't work, but what are your thoughts?

@smugoverdose Жыл бұрын

Am I missing the link to that cutting tool? I'm not seeing it. Could be overlooking. Also.. what's that "sinker" you use. I had no idea about it and my whole life is about to change lol ❤ thanks

@smugoverdose Жыл бұрын

@@SteveMcDonaldArtsandCrafts thanks very much!