Is This 'Future You'?

Рет қаралды 13,627

Күн бұрын

🚨Building a fast car? Get $400 OFF the all-inclusive VIP online course package deal: hpcdmy.co/vipy97
🔥Kickstart your EFI Tuning knowledge. Get 50% OFF your first online course: hpcdmy.co/offery97
14 minutes of race car build tips & experiences.
Money. No matter how much we have, no one likes to or wants to waste it. A motorsport application will cost precisely the amount you budget for it, plus some more. In this interview, some tips are discussed on how to trade a bit of your time to make better decisions for your build and your wallet, even if you don't intend to do all the physical work yourself.
Running Nitto 2.2L stroker kit, Kelfod Cams, and ARP head studs to make around 500kw at 2.2 bar (670hp, 32psi), this RevZone built 4g63 powered EVO 7 Open Class Time Attack build is a constant work in progress for Darren Bishop, but not just in the way most people immediately think when it comes to simply adding more and more power.
At the World Time Attack Challenge (WTAC), Darren shared valuable insights into developing his time attack EVO. The knowledge base build to undertake this project has included using High Performance Academy (HPA) course materials, engaging in practical work, and consulting with specialists on their own level.
Using quality electronics like the EMtron KV8 ECU, MoTeC C127 dash, and Power Distribution Module (PDM), alongside a comprehensive array of engine and chassis sensors, Darren, with the help of Benchmark Solutions trackside dial in the car from multiple angles over the race weekend. This process involves adapting to the specific demands of each race weekend, including track layout (working to perfect every braking zone and corner), weather conditions (temperatures heavily influence tyre pressure, engine settings and traction control), and the unique preferences of both the car and driver discovered only by plenty of seat time, ensuring a solid performance between Darren's driving capabilities and the vehicle's technical setup.
Darren narrowly got squeezed out of the top 5, finishing with a respectable 6th place in the Open Class with a 1:30.3870 only JUSTTT off the pace of the 1:29.9110 set by the 5th place finisher.
------------------------------------
TIME STAMPS:
0:00 - Open Class EVO 7
0:30 - Engine Package
0:50 - Power and Boost
1:10 - Gearbox
1:25 - Electronics
1:44 - Why Use Course Material?
2:30 - How It Helped
2:50 - Spend Wisely
3:15 - Why 2.2L 4G63?
3:48 - Wiring Process
4:59 - Wiring Documentation
5:42 - PDM Configuration & Electronic Setup
6:38 - ECU Setup
7:01 - Not Just For Cost Savings
7:20 - Data Analysis
7:36 - Judd V10 On Song
7:39 - Data Analysis Usage
7:54 - Variance Plot & Lap Comparisons
8:47 - Pro Diver Help
9:13 - Where To Start With Data Analysis
10:00 - MoTeC i2
10:23 - Active Centre Differential
11:49 - Dialing In Traction Maps
12:44 - Thanks Darren! A Pleasure.
12:54 - Full Jandal Race Footage
14:33 - BUILD.TUNE.DRIVE (Just like Darren)
------------------------------------
🏆 Win FREE ECUs, engine components, wiring tools, alignment setups and more. Enter now, no purchase required: hpcdmy.co/giveaway
🏎 Want to learn how to EFI an aftermarket ECU like a MoTeC, Haltech, Link, AEM, Syvecs, EMtrom, Maxx, Ecumaster, MegaSquirt, Arduino, MicroSquirt, Holley, FuelTech, ME or something else entirely different? Fee lessons right here; enrol now: hpcdmy.co/EFI101y
💻Start learning how to reflash tune your stock ECU using platforms like HP Tuners, EcuTek, COBB, EFILive, Hondata, ECUFlash, Romraider, WinOLS and more! Sign up for the next free lesson now: hpcdmy.co/hptly
⚠️ Want to learn more about motorsport wiring? Claim your spot in the following FREE lesson: hpcdmy.co/wiringlessonyt
🧰 Learn more about Performance Engine Building by coming along to the following FREE lesson: hpcdmy.co/eby
🔧 Interested in learning how to accurately DIY align your wheels for the track or street? Start with a free alignment & suspension 101 lesson now: hpcdmy.co/aljyt
🛻 Learn more about performance diesel engine tuning. Start instantly with 4 free lessons: hpcdmy.co/essential-diesel-kn...
------------------------------------
LINKS:
Website and Courses: hpcdmy.co/hpa
Podcast: hpcdmy.co/podcast
Merch (HPA tees & hoodies): hpcdmy.co/merchy
------------------------------------
TAGS:
#highperformanceacademy #buildtunedrive #wtac #darrenbishop #nitto #emtron #motec #kelfordcams #arpbolts #4g63 #evo #revzone #pdm #auto #carmods #automotive #motorsports #racing #dragracing #endurance #circuitracing #boost

Пікірлер: 23

@hpa101 23 күн бұрын

What is your dream build? 🦸‍♂ Building a fast car? Get $400 OFF the all inclusive VIP online course package deal: hpcdmy.co/vipy97 ☝Kickstart your EFI Tuning knowledge. Get 50% OFF your first online course: hpcdmy.co/offery97 TIME STAMPS: 0:00 - Open Class EVO 7 0:30 - Engine Package 0:50 - Power and Boost 1:10 - Gearbox 1:25 - Electronics 1:44 - Why Use Course Material? 2:30 - How It Helped 2:50 - Spend Wisely 3:15 - Why 2.2L 4G63? 3:48 - Wiring Process 4:59 - Wiring Documentation 5:42 - PDM Configuration & Electronic Setup 6:38 - ECU Setup 7:01 - Not Just For Cost Savings 7:20 - Data Analysis 7:36 - Judd V10 On Song 7:39 - Data Analysis Usage 7:54 - Variance Plot & Lap Comparisons 8:47 - Pro Diver Help 9:13 - Where To Start With Data Analysis 10:00 - MoTeC i2 10:23 - Active Centre Differential 11:49 - Dialing In Traction Maps 12:44 - Thanks Darren! A Pleasure. 12:54 - Full Jandal Race Footage 14:33 - BUILD.TUNE.DRIVE (Just like Darren)

@marktiltins8845 3 ай бұрын

It's your entry into the corner thats letting you down 👏 Stop thinking corner, think radias

@shane49520 3 ай бұрын

that engine bay photo @3:23 is so immaculate, i dream of getting my evo 7 engine bay to look like that

@user-gm6fv3uk9b 3 ай бұрын

Great vid Gents. Interesting hearing how the 4wd is controlled and how they operate it similer to how Nissan ATESSA works. I also wasnt aware evos drove the front predominantly. Learn something every day!

@dhrida5518 3 ай бұрын

The springs seem to be too stiff or maybe rebound is too slow, amazing to know what can be tuned and to what extent, with all that data he could even have active aero, amazing car!

@TotoGeenen 3 ай бұрын

Pretty modest on the boost level. 33-34 pounds 💀💀 It's crazy how far ICEs have come

@Trinibadman96 3 ай бұрын

After watching Andre with Evos for over a decade I would be looking at him giddy just like that in an interview with my evo that he literally helped me build lol

@AshLongie 3 ай бұрын

Makes me wanna do it lol or be part of someone doing would love to give it a go

@TheJensss 3 ай бұрын

If more people had started using open source electronics in their car like the RusEFI, the open source options would have been much better and the cost way lower. Lower cost on components means that more people can afford racing and building cars. Personally I also hope AI can be helpful with tasks like tuning in the future for better and easier tuning which results in saving reducing even more cost.

@mingscustoms 3 ай бұрын

This is a great video

@hpa101 3 ай бұрын

Cheers mate, glad you enjoyed it and appreciate the comment - Taz.

@thexpression27 3 ай бұрын

Would love to hear more details about this great car. You sadly cant find any additional info on the build on his insta...

@hpa101 3 ай бұрын

Pop some questions up and Darren might spot your comment at some stage 😎 - Taz.

@MrDriftaX 3 ай бұрын

That bloke borrowed a radiator and fan setup from me back yrs ago Smashed it up and never replaced the loaned parts

@thexpression27 3 ай бұрын

sorry to hear that he seems like a very kind guy maybe it was a misunderstanding:D

@wrighty338 3 ай бұрын

He was just waiting to finish HPA's motorsport design and fabrication course so he can knock you up a replacement at last ey😀

@MrDriftaX Ай бұрын

This was back in his drifting days We both where sponsored by the same guy with engine builds

@Dr_Xyzt 3 ай бұрын

The gears in that gearbox had an interesting appearance. Was that display piece decorated, or was it some sort of surface treatment?

@neversettle7666 3 ай бұрын

It looks like shot peening, possibly WPC treatment. I'm sure if you emailed Hollinger they would divulge details 👍

@Dr_Xyzt 3 ай бұрын

@@neversettle7666 I think you're right. Probably with ceramic beads. I've been having parts vapor blasted pretty often these days, and Saint Gobain, where I get my blast media, has wet peening media available.