Is Wet Shimming Easy? Laticrete Hydro Ban Board Wet Shim How To!
Рет қаралды 18,121
2 жыл бұрынHow to use HYDRO BAN Board to wet shim for plumb/flat shower walls. To learn more about LATICRETE HYDRO BAN Board and their complete line of shower system installation products visit laticrete.com/en/shower-insta...
(Laticrete Partner)
IM ON INSTAGRAM: / landbergtiletv
My Tools:
Franklin Stud Finder: amzn.to/3C0D4aG
Diamond Hand Pad: amzn.to/2Zddbpr
Best Trowel set in the world: amzn.to/3Cikafe
PICA best pencil on the planet: amzn.to/3DEkhmG
Stabila R-Beam Set: amzn.to/3jp2ojS
Orange Nitrile gloves LARGE: amzn.to/3lfxdIK X-LARGE: amzn.to/3liu9vu
Lev-Tec Tile Leveling System Kit: amzn.to/3jAXro0
Troxel Grout Float: amzn.to/3m3b4gW
One Hand Recip Saw: amzn.to/3G6UAfU
Comfy Ear Protection: amzn.to/3nkWO2A
The Camera Gear I Use:
Main Studio Camera: amzn.to/3ppqwGo
Main Cameral Lens : amzn.to/2Zb9II6
Adapter for Main Camera Lens: amzn.to/30E3QI3
Backup Camera: amzn.to/3m2FVKA
Camera Microphone: amzn.to/3b2rekG
Main On Site Go Pro: amzn.to/2Zivfz1
Media Mod for Go Pro: amzn.to/3B1yHe9
Main Camera Tripod: amzn.to/3vxQ2ue
Go Pro Tripod: amzn.to/3GkMuR4
My Tool Store: www.amazon.com/shop/landbergt...
Support My Channel. Buy a Shirt!👕Order Tile Shirts: teespring.com/stores/tile-life
#laticrete#showerwaterproof#tileinstallation
@laticrete 2 жыл бұрын
Great video! One tip we recommend is using a bead of HYDRO BAN® Adhesive Sealant on the edge of the HYDRO BAN Board before the board is installed, and then flattenning it out with a putty knife or trowel.
@tommyklepek8024 2 жыл бұрын
I'm not sure how you keep your sanity reading some of these negative comments, thank god there's not many. Keep up the good work, your videos are awesome Thanks
@johnb2044 2 жыл бұрын
perfect now for going to 5/8ths dry wall lots of good tips thumbs up
@Tacompton425 2 жыл бұрын
Excellent work!
@johnbeckwith1361 2 жыл бұрын
This is great for the foam board. I often times screed the thinset on the studs with hot thinset. Then attach my drywall/non foam board the same day. But the easiest method is to use drywall shims and a staple gun. Work the corners first then flush-out the rest of the studs after putting a straight edge horizontally on the wall. Install board the same day. Lastly, instead of using a wood planer, I use a 4" cup wheel grinder, it removes wood from the stud quickly and can get to areas a planer can't.
@richardsedorski1206 2 жыл бұрын
Brilliant stuff 👍👍👍
@jerrygrayson8421 Жыл бұрын
Thank you, I will start shimming my walls today and apply go boards tonight
@joefowler3106 2 жыл бұрын
Did some wet shimming today with GoBoard and it works great
@bradbaynes7724 2 жыл бұрын
Brilliant video
@michaeljbreault 2 жыл бұрын
This method does work. I prefer to use ripped down pieces of plywood and construction adhesive though. But, whatever gets the job done.
@j.w.r.i2910 2 жыл бұрын
Excellent knowledge! Now if I could just convince my boss to buy more thinset ]:
@nilomyki 2 жыл бұрын
I hope I get to see the remainder of the build. Thanks again for sharing.
@LandbergTileTV 2 жыл бұрын
2-3 videos on this build coming soon!
@johnb2044 2 жыл бұрын
could use a few screws on the studs as to form a stop so not to squeeze out to much of the bedding material
@ExtremeRecluse Жыл бұрын
Why not put a very thick bead of construction adhesive on all studs?
@christiancatheyshowers 2 жыл бұрын
Jus a thought could you use a grout motor bag full of thinset🤔
@austinc8176 6 ай бұрын
What would happen if you tried to wet shim with hardibacker?
@thecommoncarpenter6544 2 жыл бұрын
Fantastic work as usual. I have one question, when you put the rest of the screws in the next day does it Crack the thinset between the backer board and the stud? lmk thanks!
@LandbergTileTV 2 жыл бұрын
No, screws go in without problems
@Berg8891 2 жыл бұрын
Will wet shimming work on say Durock cement board? Love the videos I've learned alot. Also I use a lot of the tools you suggest on a daily basis!
@elitetilesetting1909 2 жыл бұрын
Yes it work it’s just a bit harder since the actual board it self is much heavier but still works.
@franciscoibarra1232 2 жыл бұрын
Yes!
@jerrygrayson8421 Жыл бұрын
Do you often use prefabricated niches or make your own? And why, thank you. Great video showing all steps.
@LandbergTileTV Жыл бұрын
We do both brother, depends on the tile. Mostly prefab niches
@yahelluna3842 2 жыл бұрын
Beautiful work as always, and every time you finish a tile job your niche is perfectly aligned with the tile. How do you measure your niche so it meets your tile lines?
@LandbergTileTV 2 жыл бұрын
Hard to explain, this video may help kzfaq.info/get/bejne/p5ucgJmkmdaudJs.html
@chipburns4123 2 жыл бұрын
With a tape measure.
@BZ1340 2 жыл бұрын
That only works if the client doesn't specify taller niches. Mine have asked for 14 inches inside finish.
@johnbeckwith1361 2 жыл бұрын
@@BZ1340 Yep, 12" is too small, looks too small imo. Most shampoo bottles are about that size, some even bigger. I make mine large, 16" tall. I make them focal points and I never buy premade niches.....
@Aplushandymanservice 10 ай бұрын
can i set tile the same day if i wet shim or would i need to use something that rapid sets
@LandbergTileTV 9 ай бұрын
We let the thinset set up for at least 2-3 hours
@EricNeilson_ 2 жыл бұрын
If you get the back wall plumb and flat, does that guarantee the side walls (plumbing, other wall) will be square to it after you make them plumb and flat?
@ConrickJackson 2 жыл бұрын
No, who knows how square the framers made the walls
@rickkaestner6638 Жыл бұрын
What is your recipe for mixing up a "small portion of thinset"? I can't use a whole 50 lb. bag of All Set in one go- Thanks!
@LandbergTileTV Жыл бұрын
I reviewed this 5 years ago and we use it all the time for grout and thinset! The link is in the video description if you want to check pricing. kzfaq.info/get/bejne/q7-VZbx9ntTbook.html
@rubenramos5504 5 ай бұрын
Can I do this with hardie backer ?
@LandbergTileTV 5 ай бұрын
I've been told no, concrete board absorbs all the moisture in the thinset.
@dustinscroggins3382 2 жыл бұрын
Im not a stranger to wet shimming, or using furing strips, draywall shims or even built with foam wall shims, but i do like wet shimming, it would be sweet if we can figure a way to put this thinset in a sausage gun or something to squeeze on the studs..... just a thought Great video by the way
@johnbeckwith1361 2 жыл бұрын
Put thinset into a grout bag. But it likely wont work well as the thinset wants to be mashed against the stud to make it stick and stay put. Plus it can't be too loose or it will sag off the studs.
@madcowusa4277 2 жыл бұрын
Excellent video as always. Can't find Hydroban board here (near Seattle) and it's really hard to find Kerdi board too, or All Set - highly annoying trying to source materials from all over and online.
@LandbergTileTV 2 жыл бұрын
Go to the website laticrete dot com and they have a "where to buy" Also, if you get ahold of a rep, they can ship the boards. Lastly, contractors direct dot com sells hydro ban boards.
@PlucharC Жыл бұрын
You can also try KBRS board, which I believe can be ordered online and shipped in the contiguous US.
@JH-lb3kc Жыл бұрын
Go Board at Lowes. Same thing, great stuff.
@PlucharC Жыл бұрын
@@JH-lb3kc - Does GoBoard have a cementitious coating?
@JH-lb3kc Жыл бұрын
@@PlucharC Not sure, sort of feels like it. It's 100% waterproof, lightweight, cut with knife, and tile ready. Just caulk the seems and holes just like Hydroban. No extra waterproofing needed.
@rodolfogiles8055 2 жыл бұрын
Can you wet shim cement boards?
@amariza21 2 жыл бұрын
You shouldn't wet shim anything, other than tile itself. Stop being lazy and learn the rite way. Go buy yourself a 2x and spend a couple hours and do it the rite way
@rodolfogiles8055 2 жыл бұрын
@@amariza21 i been doing it the right way who are you telling wet shimming new to me calm your tits down
@luke9822 14 күн бұрын
I feel for the guy that gets hired by the new owner that wants to remodel in 5-10 years and encounters that situation when he goes to pull off the Hyrdo Ban Board.
@BZ1340 2 жыл бұрын
Interesting what money does.LOL You were a huge Schluter user.
@LandbergTileTV 2 жыл бұрын
Still use Schluter, but can't get board. Laticrete is faster waterproofing walls and made in the USA brother. I like to represent that.
@j.w.r.i2910 2 жыл бұрын
@@LandbergTileTV faster waterproofing?
@LandbergTileTV 2 жыл бұрын
@@j.w.r.i2910 for the boards yes, no troweling thinny, cutting band and sticking. Only sealant between seams.
@Grant_S_M 2 жыл бұрын
@@j.w.r.i2910 And flatter. No banding buildup. I wish my supplier up in Northern BC would stock the Laticrete, especially now that Kerdi has become extinct.
@chrisriddle538 2 жыл бұрын
Schluter boards have been hard to get for months! Talk to you Laticrete reps and they will help you understand how to best use their products (i.e. waterproofing with adhesive/sealant). One thing my rep told me is that Laticrete does not recommend more than a 3/8" wet shim behind the boards. Like the videos.
@Michael_Paul_Chavez 2 жыл бұрын
How come you waited until the next day before placing all the screws into the board?
@LandbergTileTV 2 жыл бұрын
You need to wait for the thinset to cure/set up. If you screw it off the same day, it will suck the board in and it will not be flat/plumb.
@Michael_Paul_Chavez 2 жыл бұрын
@@LandbergTileTV cool thanks
@chipburns4123 2 жыл бұрын
I would like to know something. Maybe someone can chime in. I poured some self leveler in a shower floor area surrounded by curb and walls and the next day the shit was not level. Flat but 1/8” out of level. Wtf?
@mikejones9992 2 жыл бұрын
Haha
@MrTooTechnical 2 жыл бұрын
Stabila 80 series. No man rbeam baby.
@LandbergTileTV 2 жыл бұрын
It's all cleaned up and back on site brother!
@mattcraztex9940 2 жыл бұрын
I can see that Rubber bucket insert thing for faster mortar cleanup didn't last long.
@LandbergTileTV 2 жыл бұрын
Still have it, I need to clean it out and put it back on site.
@mattcraztex9940 2 жыл бұрын
@@LandbergTileTV I thought the purpose of it was that it didn’t need cleaning because mortar would not stick to the rubber?
@LandbergTileTV 2 жыл бұрын
@@mattcraztex9940 I'm using Multi Max Lite and that thinset sticks to everything like glue!
@fnelsoninteg 2 жыл бұрын
Everyone from drywallers to the GC have said, ‘ why do the studs need to be flat, doesn’t your thin set do that’ 😑
@Grant_S_M 2 жыл бұрын
Every damned day
@LandbergTileTV 2 жыл бұрын
lol right!? Let's float each and every tile regardless of big or small
@ConrickJackson 2 жыл бұрын
Why didnt you make your mortar bed the first day? Or wet shim and cut out the niche next day? Seems like a lot of time is being wasted here
@LandbergTileTV 2 жыл бұрын
We put board up prior to mortar bed. Install mixing valve, wet shim and install board, install mortar bed in one day. We needed to pull measurements off/from the mortar bed to obtain proper niche framing/placement in order to have full subway tiles start from the pan and a full tile end at the bottom of the niche. Day one was massive demo of shower/soffits, backsplash, removal of debris and obtaining all materials for the multiple projects in the property. We did not get to mortar bed day one.
@KingSobieski 2 жыл бұрын
I'd rather just back butter all the tiles an extra inch
@apex007 2 жыл бұрын
its called thinset for a reason
@vanman3752 2 жыл бұрын
He's using small subway tile, don't think you want to back butter small tiles that would be a nightmare.
@j.w.r.i2910 2 жыл бұрын
Sarcasm?
@LandbergTileTV 2 жыл бұрын
I think he's being a funny guy
@vanman3752 2 жыл бұрын
@@LandbergTileTV Lets hope so but if not I would not want him working for me.
@miroslavm2553 5 ай бұрын
If I would ever do that so called “wet shim”, I wouldn’t say it to anyone. Definitely not go public with that.
@LandbergTileTV 5 ай бұрын
lol, we've done it dozens of times and works great!
@jermzdee 2 жыл бұрын
Gosh....next guy to work on this in a decade is going to not enjoy this.
@amariza21 2 жыл бұрын
Im a carpenter and also very experienced with installing tile. This way is the most lazy and unprofessional way to level . Everything wring with this method. I don't care how many years of experience you have, you can't call yourself a professional if you use this method. Because something is acceptable, it doesn't mean it's the rite way
@LandbergTileTV 2 жыл бұрын
This is a professional way of making your walls "plumb" Everything is correct with this method and yes, I'm a professional.
@amariza21 2 жыл бұрын
@@LandbergTileTV lol, im sorry to disagree with you, but this is not thr correct way. This is the lazy and easy way. Because all yo do it and it's acceptable, it doesn't mean is the correct way
@LandbergTileTV 2 жыл бұрын
@@amariza21 Yes, correct way and not a lazy easy way. Please show me a video of how you do it.
@chrisriddle538 2 жыл бұрын
I have had both Schluter and Laticrete reps show and explain this method to ensure that your wall is flat and plumb. The TCNA has nothing on this method, however, they defer to the manufacturers' recommendations. So, it may not be your preferred method, but it is approved by manufacturers and would therefore be considered one of multiple correct ways to install their boards.
@amariza21 2 жыл бұрын
@@chrisriddle538 once again, acceptable doesn't mean is the correct way. There is a understanding between a tile installer and a carpenter and this situation you have to understand both. I have over 20 years of experience as a finish carpenter, and tile installer . I have seen people do so many things because is acceptable, but doesn't mean is the correct way. I can give a 100 difference reasons from a carpener's perspective why u shouldn't wet shim. There is a couple of tile installer very famous on KZfaq that i never seen wet shim walls. Everyone has different way of doing things the correct way, but this isn't one of them. No matter what the book says
🔥| The Built with Foam Shim System |How to flatten and plumb walls for tile! 🔥 #DIY #homeimprovement
Hamilton Tile GA
Рет қаралды 5 М.
CREATIVE COUPLE
Рет қаралды 62 МЛН
TileCoach
Рет қаралды 29 М.
RFC Fighting Championship
Рет қаралды 641 М.
Fabiosa Best Lifehacks
Рет қаралды 3,3 МЛН