No video
Issues I had changing the rocker cover gasket on a Peugeot 308
Рет қаралды 6,592
Күн бұрынVideo showing the issues I removing the rocker cover on a Peugeot 308 16-valve 1.6 2010, this video is for information purposes only, work on your own car at your own risk.
@lloyd-qt1mg 2 жыл бұрын
Thank you Paul. It's given me the confidence to replace my cover gasket & tube seals on a 2008 Pug, 1.6 Turbo petrol. Oil's leaking into the sparkplug chambers and creating havoc with starting when the engine's cold. Stumble, stumble, engine almost dies then cuts out. Restart, then rev, rev and it comes right and off I go. Driving me mad!
@IDSMadDog 22 күн бұрын
I'm having the same issues. Was the problem solved after changing the gasket?
@philosophonikos 3 жыл бұрын
Another question: didn't you have trouble accessing to the screw on the right, where there is a box containing cables ? I can't find a way to slide this black box on the right in order to access the screw.
@myobsessions9508 3 жыл бұрын
Sorry not sure what black box you are referring to, send me a pic to bartram.paul@googlemail.com and I'll see if I can work it out for you.
@myobsessions9508 3 жыл бұрын
Got your image, I didn't need to remove that bolt to get the rocker cover off, so I don't know, sorry
@philosophonikos 3 жыл бұрын
@@myobsessions9508 Alright, it seems I'm unlucky. Thanks a lot again! 😉
@philosophonikos 3 жыл бұрын
@@myobsessions9508 I found a way. To remove this clutter, you have to lift it up with a screwdriver.
@johnhart8799 Жыл бұрын
Hi is that the 1.6 16v THP engine? If so what torque setting did you tighten the bolts to?
@myobsessions9508 Жыл бұрын
Yeah, I didn't have a Torque wrench at the time, so used my best guess, that caused a minor oil leak, so suggest you find that out.
@myobsessions9508 Жыл бұрын
Please post the Torque wrench settings
@philosophonikos 3 жыл бұрын
Thanks for the video. Did you put silicon paste to seal the cover ?
@myobsessions9508 3 жыл бұрын
No, modern gaskets hold themselves in place pretty well so it's not required and can even melt the new gasket.
@philosophonikos 3 жыл бұрын
@@myobsessions9508 thanks a lot ! 👍
Fel-Pro Gaskets
Рет қаралды 284 М.
Автоэлектрик диагност 161
Рет қаралды 39 М.
trollmanrs
Рет қаралды 3,2 М.
OFFICIALLY GASSED - OG
Рет қаралды 191 М.
Garage 54
Рет қаралды 4,4 МЛН