Isuzu 4jx1 Injector Re-seal

Рет қаралды 35,528

3 жыл бұрын

In Today's video, we are going to be resealing a set of injectors, oil rail, and Injector sleeves. This engine had an oil leak in the rail and was losing oil prime overnight causing hard starting.
Also if you are getting diesel in your cooling system or coolant in your fuel tank this reseal also deals with this issue.
Grab a coffee and check out this latest Video.
(Please note some links in the description are affiliate links that give me a small commission to help with running this channel.)
The procedure I used for the resealing -
basketcasebuilds.com/wp-conten...
OEM Isuzu part numbers used during the resealing -
1 x 8971865740 O-Ring (Rail Drain)
2 x 8971865701 O-Ring (Oil Rail End Caps)
1 x 8971865720 O-Ring (Oil Pressure switch - ORPS)
1 x 8971865730 O-Ring (Oil Rail Temp Switch)
1 x 8971865710 O-Ring (Oil Delivery fitting to Oil Rail)
2 x 8971842160 O-Ring (Oil Delivery Pipe)
4 x 8971757830 O-Ring (Injector to Rail)
4 x 8972407980 O-Ring (Injector Body Seal)
4 x 8971611092 Gasket (Injector Nozzle)
4 x 8971690200 O-Ring (Injector Tube)
4 x 8972407970 O-Ring (Injector Tube)
Injector Sleeve Puller - amzn.to/37yoJ7Q
O-Ring Grease - amzn.to/3gesELZ
The contact I used to get my parts. (I used Email to get a quote and Paypal to purchase)
Ramin Auto Spare Parts Trading L.L.C
Your Source For Isuzu Genuine Parts
P.O.Box 30199
Dubai - United Arab Emirates
Tel. : 00971 4 2670081
Fax: 00971 4 2671502
Email: raminaut@emirates.net.ae
www.isuzuautopartsstore.com
Social Media -
/ basketcasebuild
/ spinningspanners
/ basketcasebuilds
Credits -
www.bensound.com - All Music.
intro - William Vaulter.
Outro - TGamerBoy.

Пікірлер: 121

@GregNeville 3 ай бұрын

Great video,you put every thing in there that is needed,kit the blooper,that what late nights do,thanks for saving us a lot of time. Regards greg

@basketcasebuilds5712 Ай бұрын

Thanks, Greg for watching and checking out the channel. 💯

@dShooot 2 жыл бұрын

Thank you from Russia! It's great you've posted this video. I found out recently that Isuzu is kinda popular in Australia and it's great that you guys share a lot of information about this car. Thanks!

@basketcasebuilds5712 2 жыл бұрын

No worries, Thanks for taking the time to check out the channel 👌💯

@Eirehunter22 Жыл бұрын

Fantastic video mate,very informative helped me no end sorting a fuel mixing with oil problem. All the best from Ireland 🇮🇪

@basketcasebuilds5712 Жыл бұрын

No worries. Thanks for checking out the channel. 🇦🇺💯

@giltottv3221 2 жыл бұрын

Keep blogging your video is very informative I learned a lot

@basketcasebuilds5712 2 жыл бұрын

Appreciate the kind words. Thanks for checking out the channel. 👌

@thegoodroom2387 Жыл бұрын

I’m about to attempt this. Thanks for the great video man. From NZ

@basketcasebuilds5712 Жыл бұрын

Good luck!

@younesalsanhaji1603 2 жыл бұрын

Perfect job! Thanks for sharing and effort!

@basketcasebuilds5712 2 жыл бұрын

Your welcome. Thanks for taking the time to check out the channel 💯👌

@user-cj7rw3hn9v Жыл бұрын

Great video. Very thorough explanation. Thanks heaps.

@basketcasebuilds5712 Жыл бұрын

Glad it was helpful!

@danielcresswell3205 3 жыл бұрын

Excellent video mate very informative, CHEERS

@basketcasebuilds5712 3 жыл бұрын

No worries and thanks for checking out with channel.👍

@DiYSpanner 3 жыл бұрын

Thanks for sharing this video.

@basketcasebuilds5712 3 жыл бұрын

No worries. Thanks for checking out the channel.👌

@blairguinea6811 3 жыл бұрын

Just found your channel Sir, its great.............I have the 4jg2 engine

@basketcasebuilds5712 3 жыл бұрын

Thanks for taking the time to comment. 👌

@aztazou 2 жыл бұрын

Big thanks for the tips 😉

@basketcasebuilds5712 2 жыл бұрын

No worries, thanks for checking out with channel 💯

@pkgoldopalhunting 11 ай бұрын

good job mate i had to do mine about 4 years ago was a ok job

@basketcasebuilds5712 11 ай бұрын

Thanks for checking out the channel 👌

@marioaves7824 3 жыл бұрын

Nice video very informative

@basketcasebuilds5712 3 жыл бұрын

No worries. Thanks for taking the time to checkout the channel 👍💯

@MarkWright1963 3 жыл бұрын

Great video thanks.

@basketcasebuilds5712 3 жыл бұрын

No worries, thanks for checking out the channel 👌

@user-se7oh1gy5m 4 ай бұрын

Good job

@basketcasebuilds5712 Ай бұрын

Thanks for checking out the channel.

@yishaiamar5831 3 жыл бұрын

Thanks man!

@basketcasebuilds5712 3 жыл бұрын

No worries, Hope it helps

@user-mb4vn2mg2y 2 жыл бұрын

Wow amazing work You can bring links For a set of rubber bands and discs Complete as you did? And sorry if I'm not clear I'm with Google Translate

@basketcasebuilds5712 2 жыл бұрын

Sorry not sure what you mean when you say “rubber bands and discs” Thanks for checking out the video.

@humbertobenitezbenitez5904 3 жыл бұрын

Como puedo conseguir los inyectores nuevos y la camisa con los anillos de gomas izuzo wisard 4jx1 año 2000

@basketcasebuilds5712 3 жыл бұрын

Gracias por visitar el canal. Si envía un correo electrónico al distribuidor de isuzu en Dubai, le dará un precio. la dirección de correo electrónico está en la descripción

@marinjules 3 жыл бұрын

Hello, nice video very informative. What is this grease at 19.05 please? Thank you

@basketcasebuilds5712 3 жыл бұрын

Hey Thanks for checking out the channel. The grease I used was a valve and O-ring grease made by “Dow Corning” called Molykote 111.

@marinjules 3 жыл бұрын

@@basketcasebuilds5712 Thank You

@cesarjorgemurillobarientos1813 Жыл бұрын

Very good

@basketcasebuilds5712 Жыл бұрын

Thanks for checking out the channel 💯👌

@garynew9637 11 ай бұрын

Mine got very hard to start over a month, now wont start at all. Cut white wire, still no luck. What should i look at next? Injector seals good so far.

@basketcasebuilds5712 8 ай бұрын

glow plugs and air on the suction side of the fuel system. Thanks for watching.

@MsNewly 2 жыл бұрын

Could you tell me the catalog numbers: Rail oil pressure switch - RP Oil temperature sensor - OT

@basketcasebuilds5712 2 жыл бұрын

www.catcar.info/isuzu/?l= Put your VIN number in and lookup - 0 - Engine, Emission, Engine Electrical then 0-52 - OIL AND VACUUM PIPING; ENGINE You then pick 4JX1 and the first picture will have the 2 x sensors. Item 495 and 496. Bookmark the page and you then have a complete parts book for your VIN number. Cheers

@LukeySaint 2 жыл бұрын

Cheers legend 🤙🏾

@basketcasebuilds5712 2 жыл бұрын

👌

@pigeonandtoes5664 3 жыл бұрын

Thanks man

@basketcasebuilds5712 3 жыл бұрын

No worries. Thanks for checking out with channel 👍

@user-em5fp5ji9h Жыл бұрын

Great! Thanks.

@basketcasebuilds5712 Жыл бұрын

You're welcome!

@jimirra2572 2 жыл бұрын

If someone doesnt have the tools to engineer a tool for removing the end caps on the oil rail, can it be purchased? if so where abouts? Cheers for the video I just bought a 2000 jackaroo and have to do the same procedure

@basketcasebuilds5712 2 жыл бұрын

Thanks for checking out the video, I couldn’t find a tool when I was looking. You can use stilsons on the cap and lock the rail in a vice. But seriously it was just a nut ground down with a grinder. If you don’t have the gear I would see if any engineering shops or mechanical shops might make one and remove and install the end caps. Good luck

@jimirra2572 2 жыл бұрын

@@basketcasebuilds5712 thanks mate

@MsNewly 2 жыл бұрын

Thank you for this video. A very good lesson for my own experience. I am from Russia and we call this car Bighorn. Many people say that this is a very bad engine and change it to the previous one for this 4JG2 car. Please tell me if you need to disassemble the injector? I heard that there is also a rubber ring inside and when it wears out, the fuel can get into the crankcase with oil. Is this so or is it better not to do it?

@basketcasebuilds5712 2 жыл бұрын

Hey Thanks for checking out the channel. I have never disassembled an injector. There possibly could be an o-ring in the injector but I never had a problem. Fuel can get into the oil when the top o-ring leaks between the injector sleeve and the cylinder head. Here in Australia there were 2 recalls one for the injector sleeve O-rings and later they changed the injectors out for modified ones in the second recall.👍

@basketcasebuilds5712 2 жыл бұрын

Also, check out this article - forum.australia4wd.com/index.php?/topic/27750-what-a-fuel-leak-in-a-sleeve-looks-like/

@omaryjabba2365 Жыл бұрын

my engine produce a lot of smoke. is this can be a solution?4jx1

@basketcasebuilds5712 Жыл бұрын

Maybe or could be a turbo

@scottstevens1879 Жыл бұрын

Thanks for the info mate. I am about half way through that swamp myself. I am a bit thick but i cant seem to find the link for your supplier. I sourced some on the gold coast but $270 later and half the o rings are wrong.. just wondering if you could push me the link i know it is pretty academic now but did u notice that the o rings that you took off the injector sleeves are a different thickness to the ones u put back on. My kit came with the thinner ones and when i fitted them they sat down inside the groove and would not have sealed much at all. Once again, thanks for the video, much appreciated.

@basketcasebuilds5712 Жыл бұрын

Ramin Auto Spare Parts Trading L.L.C Your Source For Isuzu Genuine Parts P.O.Box 30199 Dubai - United Arab Emirates Tel. : 00971 4 2670081 Fax: 00971 4 2671502 Email: raminaut@emirates.net.ae www.isuzuautopartsstore.com E-Mail for a quote first as it will be in USD. Thanks for watching

@declanbannerton2470 Жыл бұрын

Very good ☺️ excellent 👍 👍👍 👌

@basketcasebuilds5712 Жыл бұрын

Thanks for checking out the channel 👌💯

@heikkihyvanen 2 жыл бұрын

Great and thorough video, thank you! I suspect that I have diesel mixing with oil and pulled the injectors and sleeves out. However, when I removed the injectors, they had two o-rings and one metal ring that kind of fits on the shaft over the o-ring on the injector, but I don't see that metal ring in any videos or pictures I have come across. There is also only one o-ring groove on the injector, so I'm a bit confused. Perhaps the other (larger) o-ring was someone's own addition, because sometimes they stayed in the sleeves when I pulled out other injectors and sometimes came out with the injectors. But does anyone know what is that metal ring, is it supposed to sit there in the space between the injector and the sleeve? Is it a part of the sleeve? There is only one groove. Between the sleeve and the head there are two o-rings. The injectors were fairly clean and shiny, no discoloration or carbon buildup (except the nozzle) but the sleeves showed some wear between the upper seal and the top edge, so probably fuel indeed had been flowing towards the camshafts mixing with oil. I'm not certain though should the sleeve be replaced entirely in this case or would it be good enough with new o-rings. There are no scratches but it is clearly not as shiny as the opposite side. The electrical connectors/plugs were also broken by the previous mechanic and were held in place with wire and zip ties and the rubber seals were in a pretty bad shape. Does anyone have any tips with those?

@basketcasebuilds5712 2 жыл бұрын

Hey Heikki, you can purchase new ends for the wiring loom. I will have to research who I got them from and let you know. The injectors only have 1 x o-ring about half way up the injector body. I have never come across a metal ring with an extra o-ring before. I think you may be correct in thinking this is something someone has done on a previous repair to try and help with sealing. You need to purchase genuine Isuzu o-rings as the after market ones will fail. Good luck and thanks for checking out the channel. 👌💯

@heikkihyvanen 2 жыл бұрын

@@basketcasebuilds5712 Thank you! I tried to include a google drive link for photos here in the comments, but it keeps disappearing. Anyway, the ring is located just above the sleeve on the injector nozzle and there is just enough space for an o-ring, so I guess that's where the extra o-ring was. I was also told that the wear/dullness on one side of the sleeve may be caused because the injectors have not been torqued down in the correct sequence and the sleeve been pulled over to one side in the head towards the oil rail. Could be. I managed to place an order for new sleeves and seals from Dubai.

@basketcasebuilds5712 2 жыл бұрын

@@heikkihyvanen you can send me an email if you like basketcasebuilds@gmail.com if it makes it easier to send photos

@basketcasebuilds5712 2 жыл бұрын

@@heikkihyvanen www.ebay.co.uk/itm/154854408994?mkevt=1&mkcid=1&mkrid=710-53481-19255-0&campid=5338722076&customid=&toolid=10050. These are replacement ends for the loom. I got mine from a different source that is no longer available. I have not used this eBay seller before.

@heikkihyvanen 2 жыл бұрын

@@basketcasebuilds5712 Thank you! I might try to get those as well! I sent photos via email.

@carlosbertolo815 3 жыл бұрын

Pode mandar as referências das peças por favor ?

@basketcasebuilds5712 2 жыл бұрын

Olá Carlos, Todos os números de peça estão na descrição e no contato que usei para fazer o pedido em Dubai. Obrigado por verificar o canal.

@BenMitro 3 жыл бұрын

Wow, that was so detailed with torque specs AND full parts list + supplier. If I could I'd do it myself too, but years have caught up. Any ideas as to how I would go about finding someone in VIC that can actually do this quality work for me? I haven't come across a mechanic that has actual experience working with the 4JX1 and the guys at the Jack Club VIC don't know anyone that still works either...age takes a toll in many ways!

@basketcasebuilds5712 3 жыл бұрын

Hey Benny, here is a link to the “Australia4wD Forum” forum.australia4wd.com/index.php?/forum/60-4jx1-30-tdi/ these guys might be able to help you out. I live in NSW unfortunately and with this COVID-19 thing going around makes it hard to travel. Good luck finding someone. Thanks for the comments and taking the time to check out the channel 👌

@BenMitro 3 жыл бұрын

@@basketcasebuilds5712 Thanks for the reply. I'll check Australian 4WD forum out. out

@BenMitro 3 жыл бұрын

@@basketcasebuilds5712 I haven't had any replies yet, but I think I've sorted and sourced the Tech2 tool and software cartridge to let me diagnose it.

@basketcasebuilds5712 3 жыл бұрын

@@BenMitro do you have a engine light on?

@basketcasebuilds5712 3 жыл бұрын

I purchased my tech2 from AliExpress.

@roldanserrano664 2 жыл бұрын

Is there a possible if the injector having problem, the diesel and oil can mix up?

@basketcasebuilds5712 2 жыл бұрын

Possible o-ring failure on injector or top injector sleeve o-ring is letting fuel past. These engines can runaway with diesel in the engine oil and cause damage from excessive engine revs please be careful. Also have a look at this write up forum.australia4wd.com/index.php?/topic/27750-what-a-fuel-leak-in-a-sleeve-looks-like/ Thanks for watching 👌

@rogerbachand3156 2 жыл бұрын

How long can one expect this fix to work? Does it need to be done regularly?

@basketcasebuilds5712 Жыл бұрын

Some people say every time you do a cam belt (100,000 kms)

@matthewhickson3942 2 жыл бұрын

Hey mate where did you get spring pins for the injector sleeve remover

@basketcasebuilds5712 2 жыл бұрын

I purchased this off a guy from the “ Australia4WD forum” he made it. You can purchase a more OEM style puller from Amazon Australia. I’ll try and find the link

@basketcasebuilds5712 2 жыл бұрын

www.amazon.com.au/TOOLS-JACKAROO-INJECTOR-SLEEVE-REMOVER/dp/B0993FWTMC/ref=sr_1_2?dchild=1&keywords=4jx1&qid=1628603500&sr=8-2

@matthewhickson3942 2 жыл бұрын

Thanks mate

@jimsteel3228 2 жыл бұрын

@@basketcasebuilds5712 i am pleased to see the tool I designed and made.... is still going strong, I like your idea of the grinding a nut down for the rail end caps

@basketcasebuilds5712 2 жыл бұрын

Thanks for your comments and checking out the channel. Your tool got me out of trouble and I still have it hanging on my wall.👍💯

@joselitodabu110 Жыл бұрын

Hi where did you buy the special tools that you use for pull out the housing of injectors?

@basketcasebuilds5712 Жыл бұрын

I purchased mine from a guy on a 4x4 forum forum.australia4wd.com/index.php?/forum/60-4jx1-30-tdi/ There is also a link to an Amazon one in the description. Thanks for checking out the channel. 👌💯

@joselitodabu110 Жыл бұрын

@@basketcasebuilds5712 thank you also for the info.goodluck

@joselitodabu110 Жыл бұрын

@@basketcasebuilds5712 by the way. What do you called to that tools?

@basketcasebuilds5712 Жыл бұрын

@@joselitodabu110 injector sleeve puller

@joselitodabu110 Жыл бұрын

@@basketcasebuilds5712 thank you very much.

@clintreedman6640 3 жыл бұрын

How long did this take to do?

@basketcasebuilds5712 3 жыл бұрын

Took 2 half days in the shed once I had all the o-rings. Thanks for watching 👌

@carlosbertolo815 3 жыл бұрын

Vedio top .

@diveme2000 2 жыл бұрын

is the inejctors after rebuild need to be reprogram?

@basketcasebuilds5712 2 жыл бұрын

I didn’t and they worked fine. I put them back in the same location they came out of. I think injectors need to be calibrated if they are new or from another engine.

@user-hk2cd8qo7m Жыл бұрын

Why oil and fuel mixsing

@basketcasebuilds5712 Жыл бұрын

Due to the O-ring blowing out in the coolant passage and fuel passage in the head that is located on the injector tube

@juliojavierdelpuerto5412 2 жыл бұрын

Tengo que no le llega el aceite en el piko

@basketcasebuilds5712 2 жыл бұрын

Bien, verificaría que la válvula de control de presión del riel de aceite funcione y permita que el aceite llegue a la parte superior del riel. Está ubicado en el lado izquierdo del motor debajo del colector de admisión hacia la parte delantera del motor. He tenido problemas de arranque con esta válvula antes. Aquí hay un video que encontré que muestra la eliminación de uno. Gracias por ver el canal. kzfaq.info/get/bejne/itWJobiXvLO5daM.html