CHECK OUT THE FULL DMAX BUILD SERIES HERE :) -> kzfaq.info/sun/PLloptHW8MGGhzVQRkJaMUeCIUh5ZEplfB
@nino26822 жыл бұрын
Man what’s its your profession. So clean work . So professional. Top
@rayg12322 жыл бұрын
You make it look so simple Adam." I’m having a nightmare thinking of cutting into my new car……., great bit of kit …..
@VideoShowMeHow2 жыл бұрын
The more you slice and dice the easier it gets haha
@VideoShowMeHow2 жыл бұрын
Seriously though, if you just take your time, lots of standing back and double checking and you're laughing
@KPBoeck2 жыл бұрын
Thank you Adam for making has aware of this product. So many uses. I have ordered one because of your flog. Thanks Karl
@ChristoNorman2 жыл бұрын
Just leting you know I have just ordered this from our local distributor in the ACT because of these great videos. Thanks for the inspiration!
@VideoShowMeHow2 жыл бұрын
Great bit of kit 👍
@ral848d2 жыл бұрын
Brilliant as always Adam, nice clean install and awesome product
@nino26822 жыл бұрын
He is pro he know all . Mechanical engineering or something like that. Look how he to all that stuff. Por mega pro . For job that he do I will pay money no matter how much money he asking.
@paultabone20102 жыл бұрын
Good evening everyone 😎👍🇦🇺
@willcaswell23412 жыл бұрын
Thanks, this answered all of my questions around the Huracan Fabrications. OUTSTANDING
@VideoShowMeHow2 жыл бұрын
Thanks mate!
@Sisu22802 жыл бұрын
Seems like ideal place for ammo storage! Lockable, plus locked inside the tray! Need to see a dust strip solution for the Dmax... My 2022 LSU Space Cab is a disaster!
@SuperToobored2 жыл бұрын
Nice install, wish the one for my 4wd looked this good
@tenu-vaskar Жыл бұрын
Amazing! I am getting it done in my hilux❤
@antonreyment89452 жыл бұрын
Really nice clean mod. I have been thinking about doing this and was waiting for the discount code!
@VideoShowMeHow2 жыл бұрын
Ah sorry mate not on this one
@jarnosaarinen45832 жыл бұрын
Nice job Adam!
@VideoShowMeHow2 жыл бұрын
Thanks mate!
@jasonchitts377Күн бұрын
Hey mate great idea, now that its 2 years on, how's it holding up ? No rust ? No water ingress ? How do the struts go ? Ok to stand on to get into tray ? Mates just bought the 24 xterrain and considering do same thing. Your videos have been really informative to learn about the car. Thanks mate
@VideoShowMeHowКүн бұрын
@@jasonchitts377 yep still running it, would install again, has been great. I keep my recovery great in there
@jasonchitts377Күн бұрын
@@VideoShowMeHow thanks for reply mate,glad its going strong.
@paulchrisbyrne Жыл бұрын
Hi mate love the channel I just picked up my new dmax and have ordered the same system have hsp upgraded the struts I have ordered the same system as you installed along with LED bulbs for indicator and reverse. Loving the feel of it first Ute I’ve owned had a NT Pajero for the last 11 years 320k on clock and sold to a good mate😢
@benabbott29942 жыл бұрын
Can wait to see this cause having a lot of problems getting my handle to work
@Anthony-Parsons2 жыл бұрын
Nice to see, another great vid, but would not do that to mine.
@jasonwebber98112 жыл бұрын
Looks good. I thought struts can be adjusted by a professional, worth looking into. Or, try stabilus in Melbourne and give them the measurements of the struts you have and see what they have to build new ones and what strength needed, i just did it with my EGR load shield now that I have maxtrax and a roof basket etc on it. Made in Melbourne and quick turn around. I want to see someone fit one of these with the EGR dust defence kit, think it won’t work unfortunately.
@nino26822 жыл бұрын
Nice staff but lot of work man 😜 I M scared to that 😂😂😂. If is older car no worries. But new one 🥹
@chiefmaverson1954 Жыл бұрын
Hey man Was just seeing if hurricane has brought out that gas strut kit yet? Keen on it and happy to go through your links :)
@VideoShowMeHow Жыл бұрын
Hey mate unsure, drop them a line 👍
@chiefmaverson1954 Жыл бұрын
@@VideoShowMeHow will do, have bought a lot of stuff through your links, hope it helps 👍🏻 Good channel mate keep it up 👍🏻
@Drew-hy6zr2 жыл бұрын
3 2 1 play 🙌🙌
@MP-hf3jn2 жыл бұрын
18hrs!!! You evil man....... don't change brother
@VideoShowMeHow2 жыл бұрын
Lol, figured late arvo would be the go 🤘
@user-cz1ss2bp6o6 ай бұрын
Hey guys great video BTW one thing what about the rubber seals if you don't replace them how is it sealing and can this work with a tail gate sealer kit
@roocrew862 жыл бұрын
damn would have been perfect now with my morning coffee, I have this on order! Whens the DP follow up coming?
@VideoShowMeHow2 жыл бұрын
Perfect timing! Likely a couple months, few things happening, and need to redo
@bushmagpie33122 жыл бұрын
Thanks Adam, another informative video. Where the holding screws stainless or zinc steel? I was wondering if they have a rear rack which you could fit your spare tire under. This will allow top of the rack to use for max trax, solar panel etc. Also spare tyre would be ove wheels and allow long range tank under tray rear.
@VideoShowMeHow2 жыл бұрын
All stainless mate. Unsure if they have a rack, worth dropping them an email 👍
@juliuscesar98642 жыл бұрын
Another neat install Adam 😁👍🏽. My back pocket is not liking this one bit 😅. My anxiety just went up ten fold when the angle grinder came out. Too rich for my blood this one that and zero balls and confidence 😂. Think the wife would file for divorce if I start cutting up the XT beforr evem getting it 😁.
@VideoShowMeHow2 жыл бұрын
Haha thanks mate. I did feel a little odd carting cut up bits of my almost new car out to the bins 😂 but loving the upgrade 👌 p.s the trick is to do the cutting when she's out! 😁
@cimboc76622 жыл бұрын
Another awesome vid mate! I’m also looking at the tailgate central locking. Would I need to do that first or it doesn’t matter?
@VideoShowMeHow2 жыл бұрын
Could do either way, but I'd suggest doing the central locking first so it's in and you know what you're working with
@harkiratsingh96732 жыл бұрын
Awesome bro nice
@shayispunkish Жыл бұрын
Hi Adam, nice video. After a year of use, any further thoughts? Any water ingress? Hard to tell how it seals from the vid.
@VideoShowMeHow Жыл бұрын
So far so good. Only thought would be stronger gas struts but not a big deal. Glad it's installed couldn't have one without now!
@tphallett2 жыл бұрын
Nice video again Adam. I noticed something attached to the back of you right hand swing box. Is it a light? Sorry, maybe someone has asked this question before.
@VideoShowMeHow2 жыл бұрын
Yep sure is, one of the kickass light stocks 👍
@tphallett2 жыл бұрын
@@VideoShowMeHow thanks Adam. Just ordered. Using the magnetic mount to hold in place?
@VideoShowMeHow2 жыл бұрын
@@tphallett no had some mag light screw on holders I used. There's threaded inserts in the back of the boxes as well
@007woodsy2 жыл бұрын
Hi no issues with the HSP tail gate lock installed just a lil bit of extra cutting as per video instructions?
@VideoShowMeHow2 жыл бұрын
Yep no issue, you just gotta do that extra little cut of the vertical lip in the middle (tried to show in the video) then works fine. Still running mine functions as normal 👍
@johnathondowl8198 Жыл бұрын
Hey Adam. I was wondering if at the time of this video you had the central locking kit installed? And what exactly did you suggest you might have to do, couldn’t really understand what you comment was referring to? Make the opening larger by around 30mm? Thank you in advance
@VideoShowMeHow Жыл бұрын
Yes I did, you need to trim the inside lip of the box by about 30mm with a grinder otherwise it could foul on the mechanism. It will depend on which type you've gone with though, some don't I beleive
@geoffthomsett94082 жыл бұрын
Only question I have is can you still happily stand on the tailgate?
@VideoShowMeHow2 жыл бұрын
Yeah for sure, no probs
@bennowinner2 жыл бұрын
I love the idea of the tailgate storage but it seems very small for the $$ and I wo nder how much it weighs? Just dont know if I would justify the weight and cost for the benefits, but if I had a gun to lock away that sure would be handy . . . . ,maybe I should get a gun!? :-)
@alwynvanderlinde95072 жыл бұрын
Excuse all the hassle mate. But I was wondering, at around the 6 minute mark, I see you claim that you have finished the grinding process but there are still little bits of blue that haven't been cut out according to the template? Did u get these cut out with a dremel or something? Seemed like that part was just skimmed over. Cheers
@VideoShowMeHow2 жыл бұрын
Yeah for mine some of the little notches didn't seem to need cutting out (I actually forgot about them when I did the first test fit and only a couple of them hit and needed removing). To cut the notches, cut in both sides with grinder then a set of pliers to the line, grip and move up and down till the metal breaks off and voila 👌
@alwynvanderlinde95072 жыл бұрын
@@VideoShowMeHow ahhh interesting. Fantastic thanks! What's your view on installing without using sika?? Just worried about this thing getting in the way of replacing the rods or working on them and once it's all sika flexed in, my guess is that it's never coming out? Hoping to never have to take it out but you know how it goes
@VideoShowMeHow2 жыл бұрын
@@alwynvanderlinde9507 I would definitely be using the sika, that's what is going to give most of the strength. You can access the latch side no probs, if you were concerned the other end could always add a zip tie or something
@alwynvanderlinde95072 жыл бұрын
Hey is there is a discount code or something we can use for this? Obviously keen for a discount and to support the channel. Cheers
@alwynvanderlinde95072 жыл бұрын
Hi mate, what size weld removal drill bit did u use? Cheers
@VideoShowMeHow2 жыл бұрын
It's a 10mm, same as the one linked in the vid description 👍
@SargeNurseOffRoading2 жыл бұрын
Mate great video. I’m sitting in the waiting room at Line X getting mine installed. Did you have a dust seal Installed as the bit on the tailgate had to come off. As it would be hoot know if the rubber seal could be retro fitted
@VideoShowMeHow2 жыл бұрын
Yeah nice, that's on the list for me too, let me know how it goes! No dust seal as yet other than some diy, waiting to do the tub first
@SargeNurseOffRoading2 жыл бұрын
@@VideoShowMeHow sorry meant Line X are installing my hurricane fabrication storage as we speak. So did you have a dust seal rail on top as I’m going to need to Macgyver something as the dust seal had to be removed. I can’t remember if you had one or not.
@VideoShowMeHow2 жыл бұрын
@@SargeNurseOffRoading ahhhh, yeah there was a little strip there from factory at the top of the tailgate but was more so there for the channel to slide the factory plastic cover into place
@jasonquinton44002 жыл бұрын
Great install Video. I will be interested to see how this goes. I have seen a few Amarok ones that have dented tailgates. They sit very close to the outside skin of the tailgate & when you stand on the tailgate or put a fair amount of weight on it loading the back of the ute up, it dents from the inside out.
@VideoShowMeHow2 жыл бұрын
Cheers mate. Re the clearance, you can see in the vid the rods for the latches run under the box and move freely, so seems to be a decent gap 🤷
@jasonquinton44002 жыл бұрын
@@VideoShowMeHow the clearance issues on The Amarok were at the back edge or the lower edge of the tailgate... See how it goes on the D-Max, as it may not happen on this model... Time will tell i guess.
@VideoShowMeHow2 жыл бұрын
@@jasonquinton4400 yeah ok, will keep and eye out, so far so good 🙂
@tvardz8472 Жыл бұрын
If it is a problem I wonder if expander foam could help distribute load? I want one after seeing this vid. I'm a tradie and always walking on the tailgate so a little hesitant. Any updates?
@SonicsnakeCNR Жыл бұрын
Hi Adam. Have had the tailgate storage installed for a few months now and have just had the right tailgate assist strut snap of the bracket. Would you reccomend any other strut system that can handle the constant weight?
@VideoShowMeHow Жыл бұрын
Have been trialing using the grunt struts for the last while and have been going well, seem to have a bit more 'grunt' as well. Which ones did you have? Apparently HSP have updated their design
@SonicsnakeCNR Жыл бұрын
@VideoShowMeHow was running hsp until it snapped off lol
@andyneilmcg2 жыл бұрын
Hey. Just a question since that was glued down. What happens if the handle fails in anyway?
@VideoShowMeHow2 жыл бұрын
Can still access the handle etc, the box covering it is removable :)
@gregkeegan77152 жыл бұрын
Hi great video, can it fit with a arb ascent canopy. There is a fitting across the tail gate for lid to lock against.
@VideoShowMeHow2 жыл бұрын
A fitting to the inside of the tailgate? Or the bit where the storage box is?
@gregkeegan77152 жыл бұрын
@@VideoShowMeHow The arb canopy weather seal across the tailgate it's fixed to the inside by 45mm wide metal frame stopping just short of the moveable panel. The drop in tailgate box may need to sit on a 3mm 3 sided frame to compensate for the arb canopy fitting.
@VideoShowMeHow2 жыл бұрын
@@gregkeegan7715 Ah makes sense, agree. The box is metal so you'd have no issues attaching a bracket.
@GregSharkey2 жыл бұрын
It looks like you have a tailgate edge strip - any details on this?
@VideoShowMeHow2 жыл бұрын
It's this one - Black Tailgate Scratch Guard - ebay.us/Z7YFWf
@benabbott29942 жыл бұрын
You got any tips on the latches. I’ve spent about 5 hours trying to get them to work. I get them working fine. Put storage onto and latch doesn’t open or disconnects the rods. I’ve loosened them off same thing or they don’t work. They originally sent me 2017 arms and instructions. So I’ve got no 2021 instructions on the handle
@VideoShowMeHow2 жыл бұрын
Hmmm are they touching the box? There's no residue etc left and the box sits flush? I had to cut out the extra bit in the middle as the handle for the central locking just hit and needed a bit more room
@benabbott29942 жыл бұрын
Yeah I dunno I give up. Spent 3 hours trying to get them to work today and still no luck. Get it to work about 4 times then the latches stop working or fall off
@benabbott29942 жыл бұрын
@@VideoShowMeHow are there plastic clips that connect to the rods on the edges of the tailgate latches? Mine keep falling off
@VideoShowMeHow2 жыл бұрын
@@benabbott2994 yeah on the ends it's the factory clips, nuts on the latch side. You can see in the vid
@benabbott29942 жыл бұрын
@@VideoShowMeHow ah ok Damm it I think I vacuumed them or binned em
@Auxbeam2 жыл бұрын
Hi Do you need some great lighting for your car to help you better driving, off-road? We're the pro auto lighting manufacturer for nearly 20 year and we're looking for sponsorship!