It's been decided... we want to CHANNEL the car 4 inches 😎

Рет қаралды 74,001

15 күн бұрын

We've been back and forth on whether we should channel the body OR keep it a highboy. We don't really enjoy the look of all the holes in the side of the frame so that's what made us decide to channel it. By channeling it 4", it will bring the body down far enough that the frame will be hidden. The first step will be to strengthen up the b-pillar 🦾
If you enjoyed watching ⬇️
subscribe, leave a comment and hit the like button
/ badchad
Purchase merchandise here ⬇️
www.hiltzautoco.com
Follow us on social media ⬇️
/ badchadcustoms
/ badchadcustoms
/ macintyrejn
/ ___jolene
Mailing address ⬇️
Hiltz Auto Co.
RR3
Canning, NS
B0P 1H0
Contact us ⬇️
support.hiltzautoco@icloud.com
#badchad #ford #custom #paintprep #paintingcar #painting #suspension #lowered #fender #roofchop #barnfind #hotrods #customcars #carshow #hotrodcruise #hotrods #cars #classiccars #badchadcustoms #rustrepair #car #carshow #hotrod #hotrodsandmusclecars #trucks #automobilerepairshops #rust #rustmobile #wheels #antiquecars

Пікірлер: 411

@BroknlukCyr-t3e 14 күн бұрын

The bead rolling doesn’t need to be perfect as long as the floor gets stiffened. If you don’t own a bead roller, you can make a die out of a piece of hardwood , carve out a half round groove slightly larger than the bead you want to account for the thickness of the sheet metal, then use a piece of metal rod and hammer the rod into the sheet metal placing another piece of hardwood over the steel rod so you don’t bend the rod. Diagonal bead rolls can be made.

@scottjohnson2326 14 күн бұрын

If the body drops 4" - what happens to the rear-end stance you wanted to keep? Not to mention, the 4" over your head is from sitting at floor level - 4" seat bottom ?

@dustinwannamaker6705 14 күн бұрын

Plus he was sitting about 4" lower than the bottom of his measurement.

@gil6439 13 күн бұрын

Chad will call you a liar lol

@donaldhalls2189 12 күн бұрын

@@gil6439why don't you go somewhere else if you're not happy with what he's saying and doing 😂all the best

@kellykirby8857 13 күн бұрын

What happened to the match car build? The one with the hood that tipped forward.

@George-tz1cv 13 күн бұрын

Why’s everyone getting so riled? It’s his project, he’ll build it his way. Allot of times, I kind of get lost on what he’s doing, but I sit back and watch the progress. As far as mistakes, if you never make mistakes, you never do anything. At least he doesn’t edit them out like some other builder videos.

@michaelbristol6467 13 күн бұрын

People don't understand that Chad likes a challenge. The more people say it can't be done the more he wants to prove them wrong. I have the same attitude. Go for it Champ! 😉✌

@user-lj1hi4xh6o 13 күн бұрын

I love it ,when he proves them wrong .@@michaelbristol6467

@scottnorman5057 13 күн бұрын

@@stephenk79-rc1il I see you still talking how about just watch or go post on your KZfaq channel about your custom Prius?

@billallen7716 13 күн бұрын

I enjoy the training and learning aspect of what they present to us each day.If you don't enjoy what there visions are than you have the choice to watch something else. Thank you guys for showing us your vision and giving us choices .😊

@dlux703 13 күн бұрын

I get the feeling there isn't 1 car in his barn that has 100 miles of road credentials to prove it's made to function. They seem to all be "trailer queens" and never meant to actually drive LIKE a CAR. Just parked and photorgraphed.

@NickDanger1957 13 күн бұрын

You do not have to drill out all those Chad you have a hole punch for that! Why don’t you try it the welds are stronger and I’m not lying !

@edwardkeefer5471 13 күн бұрын

That’s what I was going to say, about using a hole punch which is pretty fast if you ask me.. Faster than grinding the holes like he did..

@martyhabada6980 14 күн бұрын

Is he allowing for the seat ? He should have enough height for a boat cushion on the floor to sit on.

@claudeperron8197 14 күн бұрын

Hey! Chad, Jolene ! Thanks for helping me fill my Fun Sunday, Enjoy your videos and even though I'm to old to Fabricate anything if I were younger I would use some of your techniques; find them interesting and the basics of what everyone should know! Jolene , watch when you peep through windows with your cam, never know what some on here might think! lol. hey Fina girl!

@craigallan6229 14 күн бұрын

That engine is going to get in he way of the drivers view

@gil6439 13 күн бұрын

What Chad will call you a liar

@antristantalithaflesser1200 13 күн бұрын

the engine is quite low dude

@danielplummer6385 14 күн бұрын

Hi Chad, Jolene, & Fina it's Sunday fun day! You are getting closer to fitting the floor to the body! Chad don't forget that you need racing helmet clearance , I only mention it because those can be the kind of thing that I might not think about at the time! Jolene great work as always you are so good at running the channel and everything that is involved! Fina I hope you are having a fun day!

@ericbarlow5508 14 күн бұрын

Racing helmet 🤣🤣. That car will be rolled out to his back yard and never driven once he’s done fabricating it.

@richardharris492 13 күн бұрын

You mean fabri-cobble it together

@bobharrington3910 13 күн бұрын

I keep hearing you say “ time is money” but is a business to you. To other it is a hobby not a race for completion.

@AlbertTremblay-cr2ou 14 күн бұрын

If there is 4 inches of head room, with you sitting on the floor, aren't there going to be any seats?

@lonniecole1435 13 күн бұрын

HE plans for Jolene to drive it while lying down!

@charleshewitt3026 13 күн бұрын

it'll be fine just tighten your chinstrap and watch and see lol

@edwinheredia4305 13 күн бұрын

I don't know to much about cars. But I believe that shifter is gonna be right in front of the firewall.

@clydenicholson757 13 күн бұрын

I'm not sure if you will see this i just have to say I real enjoy watching your videos and watching the build so very cool love to wear your hats and shirts just can't right now saving up for a mini bike for my grandson, can't wait to see the car going down the road ill be as happy as you will be just blows my mind 30 days and giving your help the props they deserve very cool keep up the GREAT WORK I won't miss a show ty

@robertrabhudsonhornet5869 13 күн бұрын

I would have put 4" sells on each side of the car that way it would cover the frame i think it would be much easier and less work and time an it would look better and you would have more head room an it wount look out of place because he going to race the floor 4" so that's 4" up long the bottom of the doors not only that it's going to throw the wheel wells off. Thats funny he is saying he build a car in 30 days its not going to be finished so if the car is not all the way finished then the car it not built in 30 days.

@davidriccitiello6421 14 күн бұрын

Cool, by dropping it 4 inches, we can see the trans channel through the side window.

@jamesray3292 14 күн бұрын

Chad, you sound like my old dentist when he's working on my teeth. He talks to himself like that. "I'll take a little off this tooth here and put a little filling here." LOL

@jco1610 14 күн бұрын

Hopefully this one gets finished before moving to the next one. I still want to see the Terraplane finished and the Hot Wheels car finished.

@georgegunner662 14 күн бұрын

Yard art

@charlielemmons5525 14 күн бұрын

Wo t happen.

@charlielemmons5525 14 күн бұрын

With the roof chop and now the 4 inch channel the gearshift will be at the roof.

@charleshewitt3026 13 күн бұрын

hope so that'd be cool

@williambuhrer3524 14 күн бұрын

If you drop it 4" the back tires won't fit in the wheel wells. The way the body sits is part of what made it so cool. Sure looks like the tires will rub the body in the back, and it also reduces the interior space even more. I think the tunnel is bigger than it needs to be too. Love the chop and the car, but I think this is a mistake to channel it. I also think you should try to make a bench seat work if possible.

@charlielemmons5525 14 күн бұрын

The tunnel can't be any lower because the engine and transmission are sitting high up in the frame. No way a bench seat will work because the tunnel is more like a console.

@charleshewitt3026 13 күн бұрын

so? what's your point?

@rickpriami6659 14 күн бұрын

The rear body lines at the tire will also change ...

@gil6439 13 күн бұрын

What Chad will call you a liat

@charleshewitt3026 13 күн бұрын

oh no! lol

@tims1552 13 күн бұрын

Need to do a 4 inch drop on the seats

@roymilton426 13 күн бұрын

Can you use any old coat hangers chad??, mine are wood.

@ThomasSmith-hh8fp 13 күн бұрын

😅😅😅😂😂

@lisalawrence8456 14 күн бұрын

Im confused.when you measured your head room you were sitting on the floor. What about the seat.

@michaelbristol6467 13 күн бұрын

Yeah now he knows how thick to make the seat. If he makes a 3 inch seat and there's 5 then there's still 2 for headroom. 😉✌

@firemanack6486 13 күн бұрын

@@michaelbristol6467 yeah but if he goes over jumps with this car that’s not enough, he’ll hit his head! 😮

@michaelbristol6467 13 күн бұрын

Ah won't be no more tight than the Corvette. 😉✌

@rickcapron9353 14 күн бұрын

People complain about what they are doing but try to put a video out every day and see how it works for you all. You still watch every episode. Give them a break 😊

@ShawnCopp-dt8tf 14 күн бұрын

I guess I’m just lost on this one, if you chopped the top and now you are going to drop the body to cover the frame your seats are going to hit the roof of the car and there’s no room to sit in the car to drive it… ??

@michaelnieman6218 14 күн бұрын

As if it will ever be driven

@michaelbristol6467 13 күн бұрын

Those are small details that have to be done to all the millions of cars that have been chopped and channeled. Just have to modify the seats now no big deal. Jolene is only 100lbs she doesn't need much room. If you're 6'3 and 300lbs yeah you might think twice. 😉✌

@user-ne9ji1ld8m 13 күн бұрын

Jolene is short so it doesn't matter

@michaelnieman6218 13 күн бұрын

@@user-ne9ji1ld8m and if Chad wants to drive he can stick his head out the drivers side door window

@charleshewitt3026 13 күн бұрын

wah wah

@dwightkarels1745 14 күн бұрын

Go for it bad Chad if you don’t like it, you know what to do. Just love the build. roll on Jolene!!!!!

@NickDanger1957 14 күн бұрын

It would be easy to install the hockey tape now everything is opened up

@piranha79velasq62 13 күн бұрын

I never mess up bead rolling 😮 cause i dont do it lol😅😅😅😂😎👍

@charleshewitt3026 13 күн бұрын

neither do the haters

@user-wf6es1gx8j 13 күн бұрын

for a car that will collect dust

@jamesmencel6402 13 күн бұрын

Another 1 run wonder!

@charleshewitt3026 13 күн бұрын

wah wah wah

@NickDanger1957 14 күн бұрын

How does the transmission come out ? With a zip cut….

@holleyciggy 14 күн бұрын

the whole floor frame comes off with body.....transmission will be as simple as unbolting and lifting out.....

@stuartdaughtry3586 14 күн бұрын

Pretty sure this has been covered a dozen times by Chad, and even more times in the comments. Clearly people don't bother watching or listening.

@barryprice7230 14 күн бұрын

@@holleyciggy it's all welded to the original chassis.

@TCW-hw6iw 14 күн бұрын

@@barryprice7230 36:47 Chad distinctly says it can come off. Its only spot welded to the frame.

@jonathanlemay173 13 күн бұрын

@@NickDanger1957 you can figure this one out on your own Nick. We can’t keep holding your hand buddy.

@jonnysuperglide 14 күн бұрын

Good show Chad and Jolene thanks guys can’t wait to see the body on the frame it’s going to look amazing !!!!!!!!👍

@rarebreed7971 14 күн бұрын

Wish they had content like this when I was younger but man am I glad it exist now, keep doing what your doing, love it👍👍🇺🇲

@edwinheredia4305 13 күн бұрын

I really don't know if this cars well gets done, but let's see what happens.

@pidgeiam4979 13 күн бұрын

You and your crew inspired me last night and today to get my interior finished and custom battery tray complete. I'll guarantee Chad you haven't seen a truck like mine. Hint: '69 Japanese truck sir. Keep up the good work everyone.

@user-jk4wo2xz9h 12 күн бұрын

Dang...I was hoping for hi-boy but its your project! I certainly enjoy watching all you do. No critic here, just a follower and admirer......keep up the nice work!

@ralphhanson2194 14 күн бұрын

Ranting again!!!!!

@noponder 14 күн бұрын

What about the height of the car seat?

@RickyPinkston 13 күн бұрын

It's a GREAT call on the channeling the car ready to set back with some a cold something and some popcorn and let the show start BADCHAD SWEET JOLENE FINA THE STAR

@michaelsymoens 13 күн бұрын

I think the one main ingredient that you forgot was the seat unless your going to sit on the floor , think about it I seen you take the measurements for head height

@bobhalstead1879 13 күн бұрын

Are you allowing for the seat,they are 4 to 6 inches high.?

@edwardkeefer5471 13 күн бұрын

I’m pretty sure when you measure something to fit the way you want it to.. You have to measure it the right way.. I love watching what they build and I don’t like too say he’s doing something wrong, because I don’t know what’s in his head.. But if you want 4” and nothing more than that, then you should measure from underneath the floor section, not from the top of the floor.. But what do I know, I’m just a ex contractor who measured for a living..

@lukeandjilljelsma654 14 күн бұрын

He will probably have to modify the wheel wells now after dropping it 4 inches.

@gil6439 13 күн бұрын

Liar Chad will say

@roymilton426 13 күн бұрын

And fix the twist in the chassis

@doncortazzojr2960 13 күн бұрын

I would of went all the way up to bottom of windows with that steel you put in just for extra strength and hold the door hinges better with only four points on that old body you want to stiffen her up as much as possible rember there are bumps on the road way

@user-di7in2zx1c 14 күн бұрын

Chad and Jolene , Your plan for channeling the Plymouth Coupe down 4 inches is moving along well.

@scotttracey3748 14 күн бұрын

Always great content Bad Chad and Jolene, Happy Sunday.

@boatnut64 13 күн бұрын

I always Love it when people say: "Well I'm not an expert, but I think you should be doing"... I know what my Chiropractor does to my back, but I don't tell him what he should be doing... If you think you're sooo much smarter, maybe you should start your own channel, so we can all learn sooo much from you....

@jessasto947 14 күн бұрын

Thanks for the Sunday episode Jolene! It works real nice for my fix🤩

@ArlisHutchens 14 күн бұрын

4 inch channel then put steal salad bowls large ones for head room

@georgegunner662 14 күн бұрын

LOL

@billyjackson1529 14 күн бұрын

Double-bubble top

@TommyJensen-pl8qz 13 күн бұрын

😂

@jparish2469 14 күн бұрын

chopped channelled floored fully modded custom cool car .loving it thanks as always

@evandently9474 14 күн бұрын

Stoked. 🤘😎🔥 This is going to look awesome.

@WarDogs_Dad 12 күн бұрын

You do an excellent job of teaching/explaning your process. Thank you for the content

@SAVERREPUBLIC1776 14 күн бұрын

Awesome idea! That's RAD! Cannot wait to see the end result!

@gerard394 14 күн бұрын

😂 no chance see the end result

@howquick 14 күн бұрын

Watching whilst on a train from Penang to Kuala Lumpur in Malaysia. Ill have to watch again later as i have the volume off out of respect for other passengers on the train

@kbschulze 13 күн бұрын

Great job Chad! Transparent as a person can be, love that. My favorite channel 🙂😊

@keithhumes9612 13 күн бұрын

I like what you are doing with the car. It would be nice to see what it looks on the frame first. Then to see what it looks like after it is channeled.

@welhari6181 14 күн бұрын

What I see at this point having to channel the car now, now at this point wouldn't he be, cutting rear wheel wells out, just as much as the channel!

@user-nh6ct9pl2b 13 күн бұрын

That is why they have school for actors . If Arnold can become a super star u should have no problem just a SAG card and a agent . really they look for mostly the appeal on camera and a presence that draws an audience which u have abundance of .

@bakersfieldc1082 13 күн бұрын

U need some cheese with that wine

@edwardkeefer5471 13 күн бұрын

They already cut all that out of the car and if more needs to be cut out, he’ll cut more out of it…

@michaelmorrow6853 14 күн бұрын

Chad the comments seem to have you set off. Remember youre great.

@aaronbieman3490 14 күн бұрын

I like how it is turning into a cool ride. Nice work.

@tienierabie748 13 күн бұрын

Nice work. Floor looks super

@anthonymilton 14 күн бұрын

Drop the front 2inch leve the rear fill the holes in the frame job done. But thats my opinion.

@janmorse8777 14 күн бұрын

Sounds like a plan 👍 Go for it Team Hiltz 👁 🐅 👌

@davescheer5038 13 күн бұрын

🌴 Channeling it will keep it from looking like a Hi boy , getting the Karrr, down lower gives it a more desirable look , I really wanna see it set on the frame to see the stance .🤔 did you allow for any rubber mounts between the frame and body ?

@spamwagon 13 күн бұрын

So you're checking your head-room sitting on the floor. That shifter is gonna be at Jolene's shoulder.

@mattpiilo 14 күн бұрын

Chad i feel you should know there are many reasons why you should always weld from the bottom up. ask AI for the reasons there are at least 6 good reasons

@holleyciggy 14 күн бұрын

the reason he doesn't is because the way he has been doing it works fine....don't fix what isn't broken🤷🏻‍♀️

@michaelbristol6467 13 күн бұрын

AI 😆 Welcome to the real world. 😉✌

@mattpiilo 9 күн бұрын

@@michaelbristol6467 chat gpt is handy and free i dont feel like typing out all the reasons. welcome to the new world

@mattpiilo 9 күн бұрын

@@holleyciggy yes its fine for non-structural but my point is that it could be a safety issue on structural steel . in that case its not fine. and it can break more easily

@markplant2184 14 күн бұрын

Awesome, thanks

@user-qs2bt7fl7g 11 күн бұрын

Glad to see it is getting close to mounting the floor to the body

@judydolbow1695 14 күн бұрын

you are funny Chad, Jolene still doing one hell of a great job on the camera and Fina is a such a cutie

@ate-updesigns9186 14 күн бұрын

Go for it chad like I know you will...it will be badazzzzzz...and so much negativity...geesh..glad you don't let that get to ya..life is too short..cya tomorrow Chad and jolene

@juanllado 14 күн бұрын

Beautiful car💪🧑‍🏭

@ROLANDO72510 14 күн бұрын

go for it Chad , Happy Sunday all

@DADDYCOKE2012 13 күн бұрын

Let’s get back on the Hot wheels car

@ivoman7 14 күн бұрын

Sup @BadChad & Jolene? Had fun watching!

@1944chevytruck 14 күн бұрын

GOOD JOB!

@richardharris492 14 күн бұрын

Why does everything need to be done quickly??? How about correctly and in good time? It's not a race or is it? What is your motivation? Are you on a time line we're not aware of???

@georgegunner662 14 күн бұрын

It has to be finished by November for the SEMA show in Las Vegas..LOL

@michaelbristol6467 13 күн бұрын

Late September for the 1/8 mile drags. Dale Earnhardt wasn't the best because he was slow or Muhammad Ali or Carl Lewis. 😉✌

@MikeHerring-xc7qt 14 күн бұрын

Good to see Fina about 😊👍🐕

@rickaccount 14 күн бұрын

Still looks like a great project… will be nice to see the channeling in action

@grantscrimgeour1848 14 күн бұрын

Good...been wondering if you would look at doing this. BUT should this not have been done BEFORE the roof chop? My concern is the headroom or lack of? And now that the floor has been made will the car body fit over it?

@steves2241 14 күн бұрын

After he does all that and puts the seats in, their heads will be hitting the ceiling.

@grantscrimgeour1848 14 күн бұрын

@@steves2241 He said they would just lean the seats back a bit to compensate and that would be OK because they have the taller windshield. Time will tell if he is right or have to fashion yet another work around.....But this project is certainly more interesting than some of the others. Perhaps because I have always had a liking for 5 window coupes and because my parents had a '34 Plymouth 4 door sedan which was the first family car that I remember

@steves2241 14 күн бұрын

@@grantscrimgeour1848 Yeah I know, I watched the video.

@garrickclark3965 13 күн бұрын

OK, so, I'm watching this right now. Chad, slow down a bit, where all watching, fast or slow, you'll enjoy it more if you slow down. It's all good, sectioning that thing adds to the interest, which is a good thing, there's nothing negative going on I restore cars/hot rod them. It takes time, it can't be rushed. Maybe extend the production time a little, I like the chat/what you say/talk about. Gazzer uk over n out.

@marysambrizendine1012 13 күн бұрын

Chad and Jolene do it your way 👍👍

@gilbertboulanger8536 14 күн бұрын

Hi all from Trois-Rivieres Quebec

@kevinhamling1963 14 күн бұрын

G'day Chad and Queen Jolene. The car's looking good it's coming together awesomely. Jolene, your camera work is second to none. Your amazing. Q. Do you have a directors chair. So thanks for sharing the knowledge Chad ✌️ Peace from Melbourne Australia.

@leblanckerry4826 14 күн бұрын

“I’m Bad Chad and I’m the greatest fabricator of all time. If you think you’re better than me you’re a liar.”Now pass me that coat hanger and let’s make some bird droppings. Chad your ego will be your downfall. BTW most people learn from their mistakes and correct the procedure, you just figure out how to get past them and continue making them. JS Good job as always Jolene just remember what goes up must come down

@georgegunner662 14 күн бұрын

Karl Fisher does alot of bead rolling and don't make those mistakes...Make it kustom

@John-kl3ue 14 күн бұрын

316 thousand subs ! Do you honestly think your 18 c a view matters hahaha

@loniecruz9824 14 күн бұрын

BOXSTATECOLORADO. THAT COMMENT. THAT SHIT IS FUNNY DEAD ON. 😁 😂 😀 🤣

@martyhabada6980 14 күн бұрын

lol

@7ovnine 13 күн бұрын

@@georgegunner662 Yeah, but to be fair, Karl is light years ahead in the skill and fabrication department

@gmc.joesousa4360 14 күн бұрын

Sunday Funday!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!11

@donlandenberg8126 13 күн бұрын

Thanks for sharing with us today.

@darrennelson631 13 күн бұрын

Chad you're right about how you done the car floor it is the quickest way you have done it like you have said ones you have put the stone guard paint on it you won't see the you have done it .👍

@allancompton6912 14 күн бұрын

Maybe some day l well get down there to see you guys! and the car Museum! That would be amazing.

@junioroliveira4451 11 күн бұрын

ÓTIMO TRABALHO. PARABÉNS.

@user-oi9er1mb6l 14 күн бұрын

Jolene does good job with that camera. Keep the good job up.

@bradleymckay365 13 күн бұрын

I say some negative things about Chad but I really think that nobody and I mean nobody can build as fast as him and I truly believe that the floors he does is very smart because he obviously knows that he's working with twisted up junk so when he builds the floors like he does means it will always come out perfect to whatever twisted frame he's working with.

@robertlarson8009 14 күн бұрын

Sunday Funday to all

@jerryharper2217 13 күн бұрын

Chad and Jolene are putting alot of their time and money into this show, Thanks guys enjoy watching, if I didn't I would watch something else.

@garyfoster4555 13 күн бұрын

You measure 4 inches with your ars sitting on the floor are you not putting seats in this thing? Will the seat in it now you're looking at 8 inches, your heads through the roof..are you putting a moon roof too?

@user-ne9ji1ld8m 13 күн бұрын

I'm sure the original seats were really high

@davidriccitiello6421 14 күн бұрын

This car was a special build for Wizard of Oz. Only the munchkins can drive it. We welcome you to chads garage.

@gil6439 13 күн бұрын

This girl commented on me I would not put my life on you tube im happy just where I am dont need to prove nothing to any one I did and have all I want.thank you very much