Jaguar XJ6 IFS DIY Coil Spring removal

Рет қаралды 15,827

Garage Buildz n Fab

6 жыл бұрын

Here I show you an inexpensive way to remove coil springs from your Jag XJ6 front suspension.

Пікірлер: 14

@markniblett4857 8 ай бұрын

You got balls dude. Done this many times just not this way.

@PedrosGarage 4 жыл бұрын

Sweet. Gotta do this for my XJS soon.

@SirReginaldBlomfield1234 3 жыл бұрын

Doing it this way is certainly tickling the tail of the dragon. If this goes wrong you won't be injured but likely killed. I've removed these springs many times over the years and would always recommend the correct churchill/spx tool. Buy or hire... your life is worth it.

@timrogers3653 5 жыл бұрын

1:27 Funny how an English car has Imperial Bolt Sizing..... That's because Imperial is an English merasurement.

@tonyb7779 5 ай бұрын

Go easy on him, he is American.

@ltsgarage7780 6 жыл бұрын

I just used 1 threaded rod. Went right down between the spring. Took the ball joint loose. Loosened the threaded rod. Down it went. This is the way jaguar does it. I just kind of made the tool. 4 bolts, 2ft of all thread rod. 4 over sized flat washers. I actually made my flats washers with 1/4 inch plate. Worked really well for me. You will end up bending the all thread rod. But who cares. You're going to throw it away when done.

@kevinlancaster6041 3 жыл бұрын

So I see you have a 53ish f100. Is the Jag front end going in it

@glenreeves9759 5 жыл бұрын

Could you tell me where you got your air bags and what kind or size? I've had the jag front end in my 37 truck for over 25 years and thinking the bags may have a better ride? Thanks, Glen

@garagebuildznfab2861 5 жыл бұрын

Glen Reeves Any 2500lb bag will work. I chose to go with Dominator 2500. I think I got them from Amazon.

@ltsgarage7780 5 жыл бұрын

Glen Reeves. I'll try to get to my shop tomorrow. I have bags in my Jaguar front end in my 1973 Ford F100. Mine are the same as the dominator 2500's as far as load bearing goes. But they have a built in bump stop and are about an inch narrower than the 2500 is. I purchased the 2500 but I thought they were just to wide for the spring pocket on the Jaguar. A little rub & you'll be out of air in a heart beat.

@ltsgarage7780 5 жыл бұрын

Next time use antisieze on the rods so you don't gull up the threads.