I really hope this helps you save time syncing a days worth of footage if your team was shooting to timecode. What else would you like me to cover in Premiere Pro?

I cannot thank you enough for this, I spent the last to days trying to sync several camera angles to the sound and it took me forever - this makes everything so much easier! Thank you so much

If I could like this twice I would. Excellent video.

I'm so happy, I'm literally about to cry haha. Thank you so much for this fantastic explanation. Really helped me!

This is fantastic Javier - thank you so much. I was able to sync a whole day's 2-camera shoot with separate audio in the time it took me to watch this video. You're a life-saver!

Thank you for your videos. I often come across your videos when I am stuck in PR and your solutions are clear and concise.

Found you on reddit a couple of months back. I mainly work (Edit and Assist) on Avid and occasionally use premiere. Your videos have been a god send. so well informed and really clearly explained. So good, thank you!

I'm just starting a new Documentary that's supposed to be veryyyyyy long shooting and editing. After 3 days of shooting, You helped me to improve the workflow A LOT !!!!! I filmed 1 hour long meetings with One camera but lots of cut, and my first multicam sequence had 55 video tracks... Merci from France.

Tis still works and was extremely helpful. Thanks!

Thanks for the super informative tutorial! Two questions: 1) What do you normally do after you’ve synced the footage in your timeline as a next step to editing? Do you link or even nest all the video and audio clips so they can be accessed from the project window like “normal” clips or do you edit by selecting clips from the timeline? And 2) What do you usually do if you find a drift? Select all the audio clips from where the drift began and adjust those all slightly to the left or right in the timeline? Thanks!

This was wonderful for streamlining a 6 camera shoot- thank you so much!

I wish I could give this video a like every time I come back to watch it to remind myself haha! This is such a lifesaver, especially now that I'm jamming timecode on my two cameras from my MixPre 10 II. Such a time-saver!

Killer tutorial, both content and presentation, nice work!

Don't normally leave comments but this really is exactly what I was looking for, thank you for taking the time to put this together

This saved me so much stress and time. I had no idea how to even approach syncing the audio before this. THANK YOU!!!

This was super helpful! Thanks buddy!

🙏🙏🙏 Thank you soooo much, you saved me sooo much time!

So. Dang. Helpful. Thank you sooooooo much!

Love this video. It's helped me so much in the past. Thank you. Question, has anybody recently experienced Premiere crashing when you try and assign labels to large batches of clips? This has only happened to me very recently.

Thank you so much!! Tomorrow a start as an editor for TV so I really needed this tutorial. Thank you Javier!

You just saved me HOURS in my workflow Javier Mercedes.

Thanks man! Came from Davinci resolve and hate the way Premiere hides simple things like this

Oh man, you saved me! I just started working on a project with an extremely tight deadline and needed to find out a quick way to sync multi-cam video + audio to get started. You literally SAVED my ass and I am SO thankful for this ace tutorial!!!! I just subscribed to your channel and sending you BILLIONS of good karma points your way

Thanks, bro, much appreciated. I didn't realize is that simple to sync all the videos. The best tutorial of how to sync video and Audio on KZfaq, clear and useful.

You saved my ass with this. THANK YOU THANK YOU THANK YOU!

I spent 4 hours before I found your lesson to build one camera by timecode! Thank you very much!

awesome, useful, quick! Thanks!

Best Premiere Video of all time. True hero.

THANK YOU!!!! This saved me hours and is the PROPER way to do this for a project that has many editors touching the project. Great work!

That was some seriously concentrated knowledge you just dropped! Amazing!

Hey Thanks Javier this thing saved my hours of sitting a#s its really really detailed & thing you shared

Very helpful! Thank you!

Best video ever! I'm somewhat new to video editing and such, but this was a life saver. I didn't know how to drop the file from the Media Broswer to the Project bin, but after that, It's gold! I'm using the AtomX with Ultraone sync, and it's AMAZING. Thanks a ton!!! Can't wait to buy more cameras to utilize this more! Maybe you can get with Atomos to help them make a video for future people like myself. I may be wrong, but I think time code is the future for even smart phone users. Plural eyes is ok, but not for a super busy one man band trying to pump out high end quality like myself Thanks again! Saved my life!

Damn. Saved me hours of work.

My man, tysm! Don't sleep on the power of metadata.

No More clapping into the mic and manually syncing - it's 2023 and Thanx Javier!

Great Video!!! Super Helpful!

Thank you so much for this, a huge timesaver for the project I'm currently editing.

Learnt something new. _Thanks_

Saved my life. Thank you

What a gangster. Saved my life.

This exertion Hella good! Recommended

thank you so much for this video!!!! I just did DIT on a project and then was asked to do the editing and I had never used timecode before. I was freaking out when I first tried to sync everything because my timeline was such a mess. This saved me HOURS of clean up!!!!!

You really SAVE ME today! Thank you so much!

Aaand thank you for sending me down a hole learning about Timecode...

HUGE thanks for this video! Absolutely killer tutorial, thanks for all your help! This has saved me hundreds of hours...

This is sooo helpful, especially for passing of to the team or Senior Editor. Thank you So much again!

Finally moving on from pluraleyes, I think. This is great. Very helpful!

Good stuff! Thank you!

Great help! Thanks!

Deserve a thumbs up for that clear and useful tutorial. Thanks

LIKE A BOSS! Great comprehensive no-nonsense run-through of exactly what I will need to do next week. Of course, I will have to re-watch at 1/4 speed LOLOL. Thank you for posting. Liked and subscribed.

This is awesome, thank you

thanks for your tutorial

Do you have any idea what could be happening with the error of when in the metadata window?

This tutorial saved me a full day. Thank you!

Thanks you Javier. Ive been tinkering with my multicam footage for years trying to find a more streamlined process for stacking cameras in premiere. This method is great and exactly what i was looking for. If you are still doing AE work let me know and ill hire you.

Great tip! Thank you! Your videos are always super helpful. As a veteran editor who started on AVID back in the day, I'm still finding great nuggets of info here.

YES! This is awesome. thank you so much for this tutorial!

This was really helpful. I have watched another couple of videos but this one really got things working for me. Thank you very much for your help Javier!

You are a lifesaver!

Gracias Javier

Thank you, thank you!

Excellent job!!! It was super helpful.

You're good

Worked perfect. Thank you!

Amazing tutorial this is killer. Coming from Avid this is just what I was looking for. Subscribed based on this. This is the way. 👍

incredible!

You are my hero

Helpful, worked perfect. Thanks!

All I can say is Lifesaver!

best way to sych to timecode. so helpful - someone delete all the other synching tutorial videos!

Dude. So helpful.

Man You deserve more subscribers ❤️

Super helpful. Also, you look a lot like Dak Prescott haha

That thumbnail is next level :D

THANK YOU!!

Thank you SO MUCH Javier!! This was so so helpful :)

fantastic! thanks man. worked brilliantly for me

Very helpful video, thanks a lot!

Yes, thank you, incredibly helpful!

Thanks a lot 🙏

Super helpful Javier! Thanks.

Thanks for the awesome quality content. Unfortunately I get stuck at the Camera Label part. It is greyed out so I cannot enter a label into the field. The XMP metadata heading states 'Not Editable' for my DJI MP4 footage. When I import a GOPRO MP4 file it allows me to add metadata. Does anyone have some advice?

Man, you saved me a lot of work and hours. THANKS A LOT!

This helped me understand a bunch, but what if you didn't know to use timecode during video capture? How can I efficiently sync an A cam, B Cam (iphone), and external audio (separate mix) to a multicam?

OMG THANK YOU!

I seem to have followed this and created the multicam sequence with 3 gopros. Is there another video that shows how to edit the sequence? Thanks!

This was so great. Thank you!

Thank you.

Excellent tutorial, thanks! Liked and subbed, great content!

Amazing! Thank you (Techtutorials :) )

Thanks for this lifesaving tip !!!

Shoutout for using Uncle Luke on this 1 😤🎯💯

You just saved me 100$ I was about to spend on pluraleyes! Thank you

Genious ! Thank you so much

Thank you!!!

Thank you

Thank you man I appreciate it!!! Everything worked but I don’t know what I did wrong I used 3 camera setup but only 2 tracks opened, how do I fix this issue🙏🏻

You save me tons of time. Thank you so so much Javier :)