Installing a 2 inch suspension lift on a 2021 Jeep Gladiator Mojave edtion
Пікірлер: 45
@Jackal_Blitz Жыл бұрын
Appreciate how thorough you were with this video. The AEV instructions are good, but it's nice to have some pointers and advice from someone who's done it before.
@rogerbenitez Жыл бұрын
This is exactly what I needed to see, how the lifted truck looks with original tires since I need more clearance but I don’t want to spend on tires right now since they’re new and I like the ride, thank you very much
@dropboxd90072 жыл бұрын
Great video. Very much appreciate the detail and time you took here. Thanks.
@abnirvana996 Жыл бұрын
This is one of the best videos explaining the AEV lift install. Thanks very much.
@jamesemerick3006 Жыл бұрын
.o
@richsanderson91032 ай бұрын
What a great and informative video. Thank you very much 👍👍
@michaelm62142 жыл бұрын
great video, good job chris
@chrispinkston1922 жыл бұрын
Fantastic job.
@victorlatouretxjeepmods78242 жыл бұрын
Great video Chris💯 probably one of the best ones I've seen no frills graphics or annoying music in the background just straight up how to do it 👍 your terminology was a little different from here in Texas like your butterfly nut we call a wing nut or flag nut, but that's why I watch these videos because I enjoy learning different things from different people you can never get enough knowledge , but I do have a question what did you use for your under hoist axle jacks to hold up your axle why it was on your lift mine are way too high and I have to put Jeeps, what I feel like is dangerously high in the air but I need shorter axle jacks just wondering what do you use and where did you get them from I've been looking for shorter ones everywhere but all I found is either too tall or maximum height only 24"
@warmeds20092 жыл бұрын
Great job on the video....
@tedmontgomery56692 жыл бұрын
Thanks for the video! I just did the rear yesterday and their instructions suck. Their photo has the rear end links with the bolt going towards the differential and it does not fit like that!
@davidp87912 жыл бұрын
Thanks for sharing - Looking to do the same on my Mohave. Bigger tires soon? The orange front skid plate - DIY?
@Pierce04202 жыл бұрын
Have mine being installed as we speak. Along with some other goodies.
@TheWudaeng2 жыл бұрын
Thanks for sharing!!
@jdlt4235 Жыл бұрын
No geometry relocation brackets?
@michaellipe48892 жыл бұрын
I knew u could do it 👍
@samhouston52172 жыл бұрын
Very nice! Thank you for the video. Now throw some 38's under there! LOL
@alamanako Жыл бұрын
Looked Great!! What size tire were in the truck?
@cudachris3347 Жыл бұрын
I want to say there either factory size or just one size bigger but I forgot to look . Sorry
@Matthew-wp1yl9 ай бұрын
Great video. I hope to do this same thing to my '23 Mojave. I was curious... did you notice a need for a new track bar? I leveled my old truck and needed a new adjustable track bar to pull the front axel back into center. Did you see a need for that on this setup?
@Matthew-wp1yl7 ай бұрын
Everything I’ve found says yes. It will be off center a little if you don’t. Better to plan on it than not.
@sarge502jeep Жыл бұрын
Serious question I can't figure out in the instructions or when you mentioned it either. At the 3:54 mark speaking on the rear bump stock blocks. I seen in the instructions and you also mention the wider portion faces the rear as far as orientation. I have this kit but haven't installed it yet and the blocks look perfectly squared. Like one side isn't wider than the other so not sure what you mean by wider????? Looks pretty even to me
@cudachris3347 Жыл бұрын
The block is square but if you look at the mounting holes they offset the block towards the rear. One of the holes have a little more material behind it so that it positions to the rear of jeep
@ericfischer28522 жыл бұрын
Do you recal what you torque the 3 shims with for the carrier bracket? Can't find it anywhere in the aev litature
@ericfischer28522 жыл бұрын
taking a guess at 65 ft. lbs
@cudachris33472 жыл бұрын
I torqued mine to 55lbs
@ericfischer28522 жыл бұрын
@@cudachris3347 Thanks you!
@arod41302 жыл бұрын
Are those still the stock 285/70/17 tires at the end?
@cudachris33472 жыл бұрын
I believe stock size but different tire type than factory
@arod41302 жыл бұрын
@@cudachris3347 thanks, looks like they are the Falcon Wildpeaks that come standard on Mojaves
@rafaelflores61322 жыл бұрын
They look like the factory 33s. Looks really nice. I wonder how the ride Quality is
@betweenthepines40002 жыл бұрын
No way, those are 35.12.50/17 on stock wheels, easy to tell with that width
@detachment-1llc8302 жыл бұрын
I know everyplace is different, etc… but about what should be a reasonable price to get this done. I know how much the lift costs, just wondering about the install. I have a 2021 Gladiator Mojave and live in South Carolina. Thanks!
@cudachris33472 жыл бұрын
6hrs or less and price per hour is set differently depending on where you live
@scottmartin61392 жыл бұрын
I had this kit installed on my 2021 Mojave in January and love it. $480 for the kit plus $402 for the install (3.5 hrs of labor). Running 35” Nitto Ridge Grapplers and 4.88 gearing. I feel like I’ve noticed a slight increase in the highway wandering but it’s not awful. Also had the 17 gal Long Ranger auxiliary fuel tank installed. $2,245 for the tank plus $575 for the install (5 hrs labor).
@antiantifans19142 жыл бұрын
@@scottmartin6139 you felt research was needed? I keep hearing it's not
@scottmartin61392 жыл бұрын
What research?
@antiantifans19142 жыл бұрын
@@scottmartin6139 wow auto correct screwed that up. It was supposed to say re gear*. I keep hearing 35 inch tires are ok with the 4:10 gears on mojave
@MrJeepguy1974 Жыл бұрын
We’re those the stock Mojave tires?
@cudachris3347 Жыл бұрын
Yes I believe so. Sorry I'm not a 100%
@peterc8979 Жыл бұрын
The front shocks are junk on my Mojave, terrible creaking sound. Being replaced under warranty. Im glad I didn't modify my truck.